int davinci_eth_phy_read(u_int8_t phy_addr, u_int8_t reg_num, u_int16_t *data);
int davinci_eth_phy_write(u_int8_t phy_addr, u_int8_t reg_num, u_int16_t data);
-void davinci_eth_set_mac_addr(const u_int8_t *addr);
typedef struct
{
enable_interrupts ();
/* Perform network card initialisation if necessary */
-#ifdef CONFIG_DRIVER_TI_EMAC
- /* XXX: this needs to be moved to board init */
-extern void davinci_eth_set_mac_addr (const u_int8_t *addr);
- if (getenv ("ethaddr")) {
- uchar enetaddr[6];
- eth_getenv_enetaddr("ethaddr", enetaddr);
- davinci_eth_set_mac_addr(enetaddr);
- }
-#endif
#if defined(CONFIG_DRIVER_SMC91111) || defined (CONFIG_DRIVER_LAN91C96)
/* XXX: this needs to be moved to board init */
enable_interrupts ();
/* Perform network card initialisation if necessary */
-#ifdef CONFIG_DRIVER_TI_EMAC
- /* XXX: this needs to be moved to board init */
-extern void davinci_eth_set_mac_addr (const u_int8_t *addr);
- if (getenv ("ethaddr")) {
- uchar enetaddr[6];
- eth_getenv_enetaddr("ethaddr", enetaddr);
- davinci_eth_set_mac_addr(enetaddr);
- }
-#endif
-
#if defined(CONFIG_DRIVER_SMC91111) || defined (CONFIG_DRIVER_LAN91C96)
/* XXX: this needs to be moved to board init */
if (getenv ("ethaddr")) {
return 0;
}
-/* If there is a MAC address in the environment, and if it is not identical to
- * the MAC address in the EEPROM, then a warning is printed and the MAC address
- * from the environment is used.
- *
+/*
* If there is no MAC address in the environment, then it will be initialized
* (silently) from the value in the EEPROM.
*/
-void dv_configure_mac_address(uint8_t *rom_enetaddr)
+void davinci_sync_env_enetaddr(uint8_t *rom_enetaddr)
{
- int i;
- u_int8_t env_enetaddr[6];
- char *tmp = getenv("ethaddr");
- char *end;
-
- /* Read Ethernet MAC address from the U-Boot environment.
- * If it is not defined, env_enetaddr[] will be cleared. */
- for (i = 0; i < 6; i++) {
- env_enetaddr[i] = tmp ? simple_strtoul(tmp, &end, 16) : 0;
- if (tmp)
- tmp = (*end) ? end+1 : end;
- }
-
- /* Check if EEPROM and U-Boot environment MAC addresses match. */
- if (memcmp(env_enetaddr, "\0\0\0\0\0\0", 6) != 0 &&
- memcmp(env_enetaddr, rom_enetaddr, 6) != 0) {
- printf("Warning: MAC addresses don't match:\n");
- printf(" EEPROM MAC address: %pM\n", rom_enetaddr);
- printf(" \"ethaddr\" value: %pM\n", env_enetaddr) ;
- debug("### Using MAC address from environment\n");
- }
- if (!tmp) {
- char ethaddr[20];
+ uint8_t env_enetaddr[6];
+ eth_getenv_enetaddr_by_index(0, env_enetaddr);
+ if (!memcmp(env_enetaddr, "\0\0\0\0\0\0", 6)) {
/* There is no MAC address in the environment, so we initialize
* it from the value in the EEPROM. */
- sprintf(ethaddr, "%pM", rom_enetaddr) ;
- debug("### Setting environment from EEPROM MAC address = \"%s\"\n",
- ethaddr);
- setenv("ethaddr", ethaddr);
+ debug("### Setting environment from EEPROM MAC address = "
+ "\"%pM\"\n",
+ env_enetaddr);
+ eth_setenv_enetaddr("ethaddr", rom_enetaddr);
}
}
}
int dvevm_read_mac_address(uint8_t *buf);
-void dv_configure_mac_address(uint8_t *rom_enetaddr);
+void davinci_sync_env_enetaddr(uint8_t *rom_enetaddr);
int davinci_configure_pin_mux(const struct pinmux_config *pins, int n_pins);
int davinci_configure_pin_mux_items(const struct pinmux_resource *item,
int n_items);
{
u_int8_t mac_addr[6];
u_int8_t switch_start_cmd[2] = { 0x01, 0x23 };
+ struct eth_device *dev;
/* Read Ethernet MAC address from EEPROM */
if (dvevm_read_mac_address(mac_addr))
/* set address env if not already set */
- dv_configure_mac_address(mac_addr);
+ davinci_sync_env_enetaddr(mac_addr);
/* read the address back from env */
if (!eth_getenv_enetaddr("ethaddr", mac_addr))
return -1;
- /* provide the resulting addr to the driver */
- davinci_eth_set_mac_addr(mac_addr);
-
/* enable the Ethernet switch in the 3 port PHY */
if (i2c_write(PHY_SW_I2C_ADDR, 0, 0,
switch_start_cmd, sizeof(switch_start_cmd))) {
return -1;
}
+ dev = eth_get_dev();
+
+ /* provide the resulting addr to the driver */
+ memcpy(dev->enetaddr, mac_addr, 6);
+ dev->write_hwaddr(dev);
+
return 0;
}
#endif /* CONFIG_DRIVER_TI_EMAC */
/* Read Ethernet MAC address from EEPROM */
if (dvevm_read_mac_address(eeprom_enetaddr))
- dv_configure_mac_address(eeprom_enetaddr);
+ davinci_sync_env_enetaddr(eeprom_enetaddr);
davinci_emac_initialize();
/* Read Ethernet MAC address from EEPROM if available. */
if (dvevm_read_mac_address(eeprom_enetaddr))
- dv_configure_mac_address(eeprom_enetaddr);
+ davinci_sync_env_enetaddr(eeprom_enetaddr);
i2c_read(0x39, 0x00, 1, &video_mode, 1);
/* Read Ethernet MAC address from EEPROM if available. */
if (sffsdr_read_mac_address(eeprom_enetaddr))
- dv_configure_mac_address(eeprom_enetaddr);
+ davinci_sync_env_enetaddr(eeprom_enetaddr);
return(0);
}
/* Read Ethernet MAC address from EEPROM if available. */
if (dvevm_read_mac_address(eeprom_enetaddr))
- dv_configure_mac_address(eeprom_enetaddr);
+ davinci_sync_env_enetaddr(eeprom_enetaddr);
return(0);
}
davinci_eth_mdio_enable();
}
-static u_int8_t davinci_eth_mac_addr[] = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff };
-
-/*
- * This function must be called before emac_open() if you want to override
- * the default mac address.
- */
-void davinci_eth_set_mac_addr(const u_int8_t *addr)
-{
- int i;
-
- for (i = 0; i < sizeof (davinci_eth_mac_addr); i++) {
- davinci_eth_mac_addr[i] = addr[i];
- }
-}
-
/* EMAC Addresses */
static volatile emac_regs *adap_emac = (emac_regs *)EMAC_BASE_ADDR;
static volatile ewrap_regs *adap_ewrap = (ewrap_regs *)EMAC_WRAPPER_BASE_ADDR;
phy_t phy;
+static int davinci_eth_set_mac_addr(struct eth_device *dev)
+{
+ unsigned long mac_hi;
+ unsigned long mac_lo;
+
+ /*
+ * Set MAC Addresses & Init multicast Hash to 0 (disable any multicast
+ * receive)
+ * Using channel 0 only - other channels are disabled
+ * */
+ writel(0, &adap_emac->MACINDEX);
+ mac_hi = (dev->enetaddr[3] << 24) |
+ (dev->enetaddr[2] << 16) |
+ (dev->enetaddr[1] << 8) |
+ (dev->enetaddr[0]);
+ mac_lo = (dev->enetaddr[5] << 8) |
+ (dev->enetaddr[4]);
+
+ writel(mac_hi, &adap_emac->MACADDRHI);
+#if defined(DAVINCI_EMAC_VERSION2)
+ writel(mac_lo | EMAC_MAC_ADDR_IS_VALID | EMAC_MAC_ADDR_MATCH,
+ &adap_emac->MACADDRLO);
+#else
+ writel(mac_lo, &adap_emac->MACADDRLO);
+#endif
+
+ writel(0, &adap_emac->MACHASH1);
+ writel(0, &adap_emac->MACHASH2);
+
+ /* Set source MAC address - REQUIRED */
+ writel(mac_hi, &adap_emac->MACSRCADDRHI);
+ writel(mac_lo, &adap_emac->MACSRCADDRLO);
+
+
+ return 0;
+}
+
static void davinci_eth_mdio_enable(void)
{
u_int32_t clkdiv;
dv_reg_p addr;
u_int32_t clkdiv, cnt;
volatile emac_desc *rx_desc;
- unsigned long mac_hi;
- unsigned long mac_lo;
debug_emac("+ emac_open\n");
writel(1, &adap_emac->TXCONTROL);
writel(1, &adap_emac->RXCONTROL);
- /* Set MAC Addresses & Init multicast Hash to 0 (disable any multicast receive) */
- /* Using channel 0 only - other channels are disabled */
- writel(0, &adap_emac->MACINDEX);
- mac_hi = (davinci_eth_mac_addr[3] << 24) |
- (davinci_eth_mac_addr[2] << 16) |
- (davinci_eth_mac_addr[1] << 8) |
- (davinci_eth_mac_addr[0]);
- mac_lo = (davinci_eth_mac_addr[5] << 8) |
- (davinci_eth_mac_addr[4]);
-
- writel(mac_hi, &adap_emac->MACADDRHI);
-#if defined(DAVINCI_EMAC_VERSION2)
- writel(mac_lo | EMAC_MAC_ADDR_IS_VALID | EMAC_MAC_ADDR_MATCH,
- &adap_emac->MACADDRLO);
-#else
- writel(mac_lo, &adap_emac->MACADDRLO);
-#endif
-
- writel(0, &adap_emac->MACHASH1);
- writel(0, &adap_emac->MACHASH2);
-
- /* Set source MAC address - REQUIRED */
- writel(mac_hi, &adap_emac->MACSRCADDRHI);
- writel(mac_lo, &adap_emac->MACSRCADDRLO);
+ davinci_eth_set_mac_addr(dev);
/* Set DMA 8 TX / 8 RX Head pointers to 0 */
addr = &adap_emac->TX0HDP;
dev->halt = davinci_eth_close;
dev->send = davinci_eth_send_packet;
dev->recv = davinci_eth_rcv_packet;
+ dev->write_hwaddr = davinci_eth_set_mac_addr;
eth_register(dev);
projects / karo-tx-uboot.git / commitdiff