======================================================================
-Changes for U-Boot 0.4.2:
+Changes for U-Boot 0.4.3:
======================================================================
+* Patches by Yuli Barcohen, 13 Jul 2003:
+ - Correct flash and JFFS2 support for MPC8260ADS
+ - fix PVR values and clock generation for PowerQUICC II family
+ (8270/8275/8280)
+
+* Patch by Bernhard Kuhn, 08 Jul 2003:
+ - add support for M68K targets
+
+* Patch by Ken Chou, 3 Jul:
+ - Fix PCI config table for A3000
+ - Fix iobase for natsemi.c
+ (PCI_BASE_ADDRESS_0 is the IO base register for DP83815)
+
+* Allow to enable "slow" POST routines by key press on power-on
+* Fix temperature dependend switching of LCD backlight on LWMON
+* Tweak output format for LWMON
+
* Patch by Stefan Roese, 11 Jul 2003:
- Fix bug in CONFIG_VERSION_VARIABLE.
- AR405 config updated.
- OCRTC/ORSG: bsp command added.
- ASH405 bsp update.
+======================================================================
+Changes for U-Boot 0.4.2:
+======================================================================
+
* Add support for NSCU board
* Add support for TQM823M, TQM850M, TQM855M and TQM860M modules
TQM855L MPC855
TQM860L MPC860
TQM860L_FEC MPC860
- TTTech MPC823
c2mon MPC855
hermes MPC860
lwmon MPC823
rmu RPXClassic RPXlite RRvision \
SM850 SPD823TS svm_sc8xx SXNI855T \
TOP860 TQM823L TQM823L_LCD TQM850L \
- TQM855L TQM860L TTTech v37 \
+ TQM855L TQM860L v37 \
"
#########################################################################
- CFG_FLASH_WRITE_TOUT:
Timeout for Flash write operations (in ms)
+- CFG_FLASH_LOCK_TOUT
+ Timeout for Flash set sector lock bit operation (in ms)
+
+- CFG_FLASH_UNLOCK_TOUT
+ Timeout for Flash clear lock bits operation (in ms)
+
+- CFG_FLASH_PROTECTION
+ If defined, hardware flash sectors protection is used
+ instead of U-Boot software protection.
+
- CFG_DIRECT_FLASH_TFTP:
Enable TFTP transfers directly to flash memory;
--- /dev/null
+/*
+ * (C) Copyright 2003 Wolfgang Grandegger <wg@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#define VIDEO_ENCODER_NAME "Analog Devices AD7179"
+
+#define VIDEO_ENCODER_I2C_RATE 100000 /* Max rate is 100Khz */
+#define VIDEO_ENCODER_CB_Y_CR_Y /* Use CB Y CR Y format... */
+
+#define VIDEO_MODE_YUYV /* The only mode supported by this encoder */
+#undef VIDEO_MODE_RGB
+#define VIDEO_MODE_BPP 16
+
+#ifdef VIDEO_MODE_PAL
+#define VIDEO_ACTIVE_COLS 720
+#define VIDEO_ACTIVE_ROWS 576
+#define VIDEO_VISIBLE_COLS 640
+#define VIDEO_VISIBLE_ROWS 480
+#else
+#error "NTSC mode is not supported"
+#endif
+
+static unsigned char video_encoder_data[] = {
+ 0x05, /* Mode Register 0 */
+ 0x11, /* Mode Register 1 */
+ 0x20, /* Mode Register 2 */
+ 0x0C, /* Mode Register 3 */
+ 0x01, /* Mode Register 4 */
+ 0x00, /* Reserved */
+ 0x00, /* Reserved */
+ 0x04, /* Timing Register 0 */
+ 0x00, /* Timing Register 1 */
+ 0xCB, /* Subcarrier Frequency Register 0 */
+ 0x0A, /* Subcarrier Frequency Register 1 */
+ 0x09, /* Subcarrier Frequency Register 2 */
+ 0x2A, /* Subcarrier Frequency Register 3 */
+ 0x00, /* Subcarrier Phase */
+ 0x00, /* Closed Captioning Ext Reg 0 */
+ 0x00, /* Closed Captioning Ext Reg 1 */
+ 0x00, /* Closed Captioning Reg 0 */
+ 0x00, /* Closed Captioning Reg 1 */
+ 0x00, /* Pedestal Control Reg 0 */
+ 0x00, /* Pedestal Control Reg 1 */
+ 0x00, /* Pedestal Control Reg 2 */
+ 0x00, /* Pedestal Control Reg 3 */
+ 0x00, /* CGMS_WSS Reg 0 */
+ 0x00, /* CGMS_WSS Reg 0 */
+ 0x00, /* CGMS_WSS Reg 0 */
+ 0x00 /* Teletext Req. Control Reg */
+} ;
* (C) Copyright 2001
* Rob Taylor, Flying Pig Systems. robt@flyingpig.com.
*
+ * Modified during 2003 by
+ * Ken Chou, kchou@ieee.org
+ *
* See file CREDITS for list of people who contributed to this
* project.
*
/*
* Initialize PCI Devices
*/
-#if 1
#ifndef CONFIG_PCI_PNP
static struct pci_config_table pci_a3000_config_table[] = {
- { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
- 0x0, 0x0, 0x0, /* unknown eth0 divice */
+ /* vendor, device, class */
+ /* bus, dev, func */
+ { PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_83815, PCI_ANY_ID,
+ PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, /* dp83815 eth0 divice */
pci_cfgfunc_config_device, { PCI_ENET0_IOADDR,
PCI_ENET0_MEMADDR,
PCI_COMMAND_IO |
PCI_COMMAND_MEMORY |
PCI_COMMAND_MASTER }},
{ PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
- 0x0, 0x0, 0x0, /* unknown eth1 device */
+ PCI_ANY_ID, 0x14, PCI_ANY_ID, /* PCI slot1 */
pci_cfgfunc_config_device, { PCI_ENET1_IOADDR,
PCI_ENET1_MEMADDR,
PCI_COMMAND_IO |
PCI_COMMAND_MEMORY |
PCI_COMMAND_MASTER }},
{ PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
- 0x0, 0x0, 0x0, /* unknown eth1 device */
+ PCI_ANY_ID, 0x15, PCI_ANY_ID, /* PCI slot2 */
pci_cfgfunc_config_device, { PCI_ENET2_IOADDR,
PCI_ENET2_MEMADDR,
PCI_COMMAND_IO |
PCI_COMMAND_MEMORY |
PCI_COMMAND_MASTER }},
+ { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
+ PCI_ANY_ID, 0x16, PCI_ANY_ID, /* PCI slot3 */
+ pci_cfgfunc_config_device, { PCI_ENET3_IOADDR,
+ PCI_ENET3_MEMADDR,
+ PCI_COMMAND_IO |
+ PCI_COMMAND_MEMORY |
+ PCI_COMMAND_MASTER }},
{ }
};
#endif
-#else
-
-#ifndef CONFIG_PCI_PNP
-static struct pci_config_table pci_a3000_config_table[] = {
- { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x0f, PCI_ANY_ID,
- pci_cfgfunc_config_device, { PCI_ENET0_IOADDR,
- PCI_ENET0_MEMADDR,
- PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER }},
- { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x10, PCI_ANY_ID,
- pci_cfgfunc_config_device, { PCI_ENET1_IOADDR,
- PCI_ENET1_MEMADDR,
- PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER }},
- { }
-};
-#endif
-
-#endif
-
struct pci_controller hose = {
#ifndef CONFIG_PCI_PNP
config_table: pci_a3000_config_table,
while (1);
}
+#ifdef CONFIG_POST
+/*
+ * Returns 1 if keys pressed to start the power-on long-running tests
+ * Called from board_init_f().
+ */
+int post_hotkeys_pressed(void)
+{
+ return 0; /* No hotkeys supported */
+}
+#endif
+
/* vim: set ts=4 sw=4 tw=78 : */
***********************************************************************/
int checkboard (void)
{
- puts ("Board: Litronic Monitor IV\n");
+ puts ("Board: LICCON Konsole LCD2\n");
return (0);
}
return (compare_magic(kbd_data, CONFIG_MODEM_KEY_MAGIC) == 0);
}
#endif /* CONFIG_MODEM_SUPPORT */
+
+#ifdef CONFIG_POST
+/*
+ * Returns 1 if keys pressed to start the power-on long-running tests
+ * Called from board_init_f().
+ */
+int post_hotkeys_pressed(gd_t *gd)
+{
+ uchar kbd_data[KEYBD_DATALEN];
+ uchar val;
+
+ /* Read keys */
+ val = KEYBD_CMD_READ_KEYS;
+ i2c_write (kbd_addr, 0, 0, &val, 1);
+ i2c_read (kbd_addr, 0, 0, kbd_data, KEYBD_DATALEN);
+
+ return (gd->post_hotkeys_latch =
+ (compare_magic(kbd_data, CONFIG_POST_KEY_MAGIC) == 0));
+}
+#endif
* I started with board/ip860/flash.c and made changes I found in
* the MTD project by David Schleef.
*
+ * (C) Copyright 2003 Arabella Software Ltd.
+ * Yuli Barcohen <yuli@arabellasw.com>
+ * Re-written to support multi-bank flash SIMMs.
+ * Added support for real protection and JFFS2.
+ *
* See file CREDITS for list of people who contributed to this
* project.
*
#include <common.h>
+/* Intel-compatible flash ID */
+#define INTEL_COMPAT 0x89898989
+#define INTEL_ALT 0xB0B0B0B0
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+/* Intel-compatible flash commands */
+#define INTEL_PROGRAM 0x10101010
+#define INTEL_ERASE 0x20202020
+#define INTEL_CLEAR 0x50505050
+#define INTEL_LOCKBIT 0x60606060
+#define INTEL_PROTECT 0x01010101
+#define INTEL_STATUS 0x70707070
+#define INTEL_READID 0x90909090
+#define INTEL_CONFIRM 0xD0D0D0D0
+#define INTEL_RESET 0xFFFFFFFF
-#if defined(CFG_ENV_IS_IN_FLASH)
-# ifndef CFG_ENV_ADDR
-# define CFG_ENV_ADDR (CFG_FLASH_BASE + CFG_ENV_OFFSET)
-# endif
-# ifndef CFG_ENV_SIZE
-# define CFG_ENV_SIZE CFG_ENV_SECT_SIZE
-# endif
-# ifndef CFG_ENV_SECT_SIZE
-# define CFG_ENV_SECT_SIZE CFG_ENV_SIZE
-# endif
-#endif
+/* Intel-compatible flash status bits */
+#define INTEL_FINISHED 0x80808080
+#define INTEL_OK 0x80808080
-/*-----------------------------------------------------------------------
- * Functions
- */
-static ulong flash_get_size (vu_long *addr, flash_info_t *info);
-static int write_word (flash_info_t *info, ulong dest, ulong data);
-static int clear_block_lock_bit(vu_long * addr);
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
/*-----------------------------------------------------------------------
+ * This board supports 32-bit wide flash SIMMs (4x8-bit configuration.)
+ * Up to 32MB of flash supported (up to 4 banks.)
+ * BCSR is used for flash presence detect (page 4-65 of the User's Manual)
+ *
+ * The following code can not run from flash!
*/
-
unsigned long flash_init (void)
{
-#ifndef CONFIG_MPC8260ADS
- volatile immap_t *immap = (immap_t *)CFG_IMMR;
- volatile memctl8xx_t *memctl = &immap->im_memctl;
- volatile ip860_bcsr_t *bcsr = (ip860_bcsr_t *)BCSR_BASE;
-#endif
- unsigned long size;
- int i;
-
- /* Init: enable write,
- * or we cannot even write flash commands
- */
-#ifndef CONFIG_MPC8260ADS
- bcsr->bd_ctrl |= BD_CTRL_FLWE;
-#endif
-
- for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
- flash_info[i].flash_id = FLASH_UNKNOWN;
-
- /* set the default sector offset */
+ ulong size = 0, sect_start, sect_size = 0, bank_size;
+ ushort sect_count = 0;
+ int i, j, nbanks;
+ vu_long *addr = (vu_long *)CFG_FLASH_BASE;
+ vu_long *bcsr = (vu_long *)CFG_BCSR;
+
+ switch (bcsr[2] & 0xF) {
+ case 0:
+ nbanks = 4;
+ break;
+ case 1:
+ nbanks = 2;
+ break;
+ case 2:
+ nbanks = 1;
+ break;
+ default: /* Unsupported configurations */
+ nbanks = CFG_MAX_FLASH_BANKS;
}
- /* Static FLASH Bank configuration here - FIXME XXX */
-
- size = flash_get_size((vu_long *)FLASH_BASE, &flash_info[0]);
-
- if (flash_info[0].flash_id == FLASH_UNKNOWN) {
- printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
- size, size<<20);
+ if (nbanks > CFG_MAX_FLASH_BANKS)
+ nbanks = CFG_MAX_FLASH_BANKS;
+
+ for (i = 0; i < nbanks; i++) {
+ *addr = INTEL_READID; /* Read Intelligent Identifier */
+ if ((addr[0] == INTEL_COMPAT) || (addr[0] == INTEL_ALT)) {
+ switch (addr[1]) {
+ case SHARP_ID_28F016SCL:
+ case SHARP_ID_28F016SCZ:
+ flash_info[i].flash_id = FLASH_MAN_SHARP | FLASH_LH28F016SCT;
+ sect_count = 32;
+ sect_size = 0x40000;
+ break;
+ default:
+ flash_info[i].flash_id = FLASH_UNKNOWN;
+ sect_count = CFG_MAX_FLASH_SECT;
+ sect_size =
+ CFG_FLASH_SIZE / CFG_MAX_FLASH_BANKS / CFG_MAX_FLASH_SECT;
+ }
+ }
+ else
+ flash_info[i].flash_id = FLASH_UNKNOWN;
+ if (flash_info[i].flash_id == FLASH_UNKNOWN) {
+ printf("### Unknown flash ID %08lX %08lX at address %08lX ###\n",
+ addr[0], addr[1], (ulong)addr);
+ size = 0;
+ *addr = INTEL_RESET; /* Reset bank to Read Array mode */
+ break;
+ }
+ flash_info[i].sector_count = sect_count;
+ flash_info[i].size = bank_size = sect_size * sect_count;
+ size += bank_size;
+ sect_start = (ulong)addr;
+ for (j = 0; j < sect_count; j++) {
+ addr = (vu_long *)sect_start;
+ flash_info[i].start[j] = sect_start;
+ flash_info[i].protect[j] = (addr[2] == 0x01010101);
+ sect_start += sect_size;
+ }
+ *addr = INTEL_RESET; /* Reset bank to Read Array mode */
+ addr = (vu_long *)sect_start;
}
-#ifndef CONFIG_MPC8260ADS
- /* Remap FLASH according to real size */
- memctl->memc_or1 = CFG_OR_TIMING_FLASH | (-size & 0xFFFF8000);
- memctl->memc_br1 = (CFG_FLASH_BASE & BR_BA_MSK) |
- (memctl->memc_br1 & ~(BR_BA_MSK));
-#endif
- /* Re-do sizing to get full correct info */
- size = flash_get_size((vu_long *)CFG_FLASH_BASE, &flash_info[0]);
-
- flash_info[0].size = size;
+ if (size == 0) { /* Unknown flash, fill with hard-coded values */
+ sect_start = CFG_FLASH_BASE;
+ for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
+ flash_info[i].flash_id = FLASH_UNKNOWN;
+ flash_info[i].size = CFG_FLASH_SIZE / CFG_MAX_FLASH_BANKS;
+ flash_info[i].sector_count = sect_count;
+ for (j = 0; j < sect_count; j++) {
+ flash_info[i].start[j] = sect_start;
+ flash_info[i].protect[j] = 0;
+ sect_start += sect_size;
+ }
+ }
+ size = CFG_FLASH_SIZE;
+ }
+ else
+ for (i = nbanks; i < CFG_MAX_FLASH_BANKS; i++) {
+ flash_info[i].flash_id = FLASH_UNKNOWN;
+ flash_info[i].size = 0;
+ flash_info[i].sector_count = 0;
+ }
#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
/* monitor protection ON by default */
/*-----------------------------------------------------------------------
*/
-
-
-/*-----------------------------------------------------------------------
- */
-
-/*
- * The following code cannot be run from FLASH!
- */
-
-static ulong flash_get_size (vu_long *addr, flash_info_t *info)
-{
- short i;
- ulong value;
- ulong base = (ulong)addr;
- ulong sector_offset;
-
- /* Write "Intelligent Identifier" command: read Manufacturer ID */
- *addr = 0x90909090;
-
- value = addr[0] & 0x00FF00FF;
- switch (value) {
- case MT_MANUFACT: /* SHARP, MT or => Intel */
- case INTEL_ALT_MANU:
- info->flash_id = FLASH_MAN_INTEL;
- break;
- default:
- printf("unknown manufacturer: %x\n", (unsigned int)value);
- info->flash_id = FLASH_UNKNOWN;
- info->sector_count = 0;
- info->size = 0;
- return (0); /* no or unknown flash */
- }
-
- value = addr[1]; /* device ID */
-
- switch (value) {
- case (INTEL_ID_28F016S):
- info->flash_id += FLASH_28F016SV;
- info->sector_count = 32;
- info->size = 0x00400000;
- sector_offset = 0x20000;
- break; /* => 2x2 MB */
-
- case (INTEL_ID_28F160S3):
- info->flash_id += FLASH_28F160S3;
- info->sector_count = 32;
- info->size = 0x00400000;
- sector_offset = 0x20000;
- break; /* => 2x2 MB */
-
- case (INTEL_ID_28F320S3):
- info->flash_id += FLASH_28F320S3;
- info->sector_count = 64;
- info->size = 0x00800000;
- sector_offset = 0x20000;
- break; /* => 2x4 MB */
-
- case SHARP_ID_28F016SCL:
- case SHARP_ID_28F016SCZ:
- info->flash_id = FLASH_MAN_SHARP | FLASH_LH28F016SCT;
- info->sector_count = 32;
- info->size = 0x00800000;
- sector_offset = 0x40000;
- break; /* => 4x2 MB */
-
-
- default:
- info->flash_id = FLASH_UNKNOWN;
- return (0); /* => no or unknown flash */
-
- }
-
- /* set up sector start address table */
- for (i = 0; i < info->sector_count; i++) {
- info->start[i] = base;
- base += sector_offset;
- /* don't know how to check sector protection */
- info->protect[i] = 0;
- }
-
- /*
- * Prevent writes to uninitialized FLASH.
- */
- if (info->flash_id != FLASH_UNKNOWN) {
- addr = (vu_long *)info->start[0];
-
- *addr = 0xFFFFFF; /* reset bank to read array mode */
- }
-
- return (info->size);
-}
-
-
-/*-----------------------------------------------------------------------
- */
-
int flash_erase (flash_info_t *info, int s_first, int s_last)
{
int flag, prot, sect;
printf ("\n");
}
- /* Make Sure Block Lock Bit is not set. */
- if(clear_block_lock_bit((vu_long *)(info->start[s_first]))){
- return 1;
- }
-
-
/* Start erase on unprotected sectors */
for (sect = s_first; sect<=s_last; sect++) {
if (info->protect[sect] == 0) { /* not protected */
/* Disable interrupts which might cause a timeout here */
flag = disable_interrupts();
- /* Reset Array */
- *addr = 0xffffffff;
/* Clear Status Register */
- *addr = 0x50505050;
+ *addr = INTEL_CLEAR;
/* Single Block Erase Command */
- *addr = 0x20202020;
+ *addr = INTEL_ERASE;
/* Confirm */
- *addr = 0xD0D0D0D0;
+ *addr = INTEL_CONFIRM;
if((info->flash_id & FLASH_TYPEMASK) != FLASH_LH28F016SCT) {
/* Resume Command, as per errata update */
- *addr = 0xD0D0D0D0;
+ *addr = INTEL_CONFIRM;
}
/* re-enable interrupts if necessary */
if (flag)
enable_interrupts();
- /* wait at least 80us - let's wait 1 ms */
- udelay (1000);
- while ((*addr & 0x80808080) != 0x80808080) {
- if(*addr & 0x20202020){
- printf("Error in Block Erase - Lock Bit may be set!\n");
- printf("Status Register = 0x%X\n", (uint)*addr);
- *addr = 0xFFFFFFFF; /* reset bank */
- return 1;
- }
+ while ((*addr & INTEL_FINISHED) != INTEL_FINISHED) {
if ((now=get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
printf ("Timeout\n");
- *addr = 0xFFFFFFFF; /* reset bank */
+ *addr = INTEL_RESET; /* reset bank */
return 1;
}
/* show that we're waiting */
}
}
+ if (*addr != INTEL_OK) {
+ printf("Block erase failed at %08X, CSR=%08X\n",
+ (uint)addr, (uint)*addr);
+ *addr = INTEL_RESET; /* reset bank */
+ return 1;
+ }
+
/* reset to read mode */
- *addr = 0xFFFFFFFF;
+ *addr = INTEL_RESET;
}
}
return 0;
}
+/*-----------------------------------------------------------------------
+ * Write a word to Flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+static int write_word (flash_info_t *info, ulong dest, ulong data)
+{
+ ulong start;
+ int rc = 0;
+ int flag;
+ vu_long *addr = (vu_long *)dest;
+
+ /* Check if Flash is (sufficiently) erased */
+ if ((*addr & data) != data) {
+ return (2);
+ }
+
+ *addr = INTEL_CLEAR; /* Clear status register */
+
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts();
+
+ /* Write Command */
+ *addr = INTEL_PROGRAM;
+
+ /* Write Data */
+ *addr = data;
+
+ /* re-enable interrupts if necessary */
+ if (flag)
+ enable_interrupts();
+
+ /* data polling for D7 */
+ start = get_timer (0);
+ while ((*addr & INTEL_FINISHED) != INTEL_FINISHED) {
+ if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+ printf("Write timed out\n");
+ rc = 1;
+ break;
+ }
+ }
+ if (*addr != INTEL_OK) {
+ printf ("Write failed at %08X, CSR=%08X\n", (uint)addr, (uint)*addr);
+ rc = 1;
+ }
+
+ *addr = INTEL_RESET; /* Reset to read array mode */
+
+ return rc;
+}
+
/*-----------------------------------------------------------------------
* Copy memory to flash, returns:
* 0 - OK
wp = (addr & ~3); /* get lower word aligned address */
+ *(vu_long *)wp = INTEL_RESET; /* Reset to read array mode */
+
/*
* handle unaligned start bytes
*/
data = (data << 8) | (*(uchar *)cp);
}
- return (write_word(info, wp, data));
+ rc = write_word(info, wp, data);
+
+ return rc;
}
/*-----------------------------------------------------------------------
- * Write a word to Flash, returns:
+ * Set/Clear sector's lock bit, returns:
* 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
+ * 1 - Error (timeout, voltage problems, etc.)
*/
-static int write_word (flash_info_t *info, ulong dest, ulong data)
+int flash_real_protect(flash_info_t *info, long sector, int prot)
{
- vu_long *addr = (vu_long *)dest;
- ulong start, csr;
- int flag;
+ ulong start;
+ int i;
+ int rc = 0;
+ vu_long *addr = (vu_long *)(info->start[sector]);
+ int flag = disable_interrupts();
+
+ *addr = INTEL_CLEAR; /* Clear status register */
+ if (prot) { /* Set sector lock bit */
+ *addr = INTEL_LOCKBIT; /* Sector lock bit */
+ *addr = INTEL_PROTECT; /* set */
+ }
+ else { /* Clear sector lock bit */
+ *addr = INTEL_LOCKBIT; /* All sectors lock bits */
+ *addr = INTEL_CONFIRM; /* clear */
+ }
- /* Check if Flash is (sufficiently) erased */
- if ((*addr & data) != data) {
- return (2);
+ start = get_timer(0);
+ while ((*addr & INTEL_FINISHED) != INTEL_FINISHED) {
+ if (get_timer(start) > CFG_FLASH_UNLOCK_TOUT) {
+ printf("Flash lock bit operation timed out\n");
+ rc = 1;
+ break;
+ }
}
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts();
- /* Write Command */
- *addr = 0x10101010;
+ if (*addr != INTEL_OK) {
+ printf("Flash lock bit operation failed at %08X, CSR=%08X\n",
+ (uint)addr, (uint)*addr);
+ rc = 1;
+ }
- /* Write Data */
- *addr = data;
+ if (!rc)
+ info->protect[sector] = prot;
+
+ /*
+ * Clear lock bit command clears all sectors lock bits, so
+ * we have to restore lock bits of protected sectors.
+ */
+ if (!prot)
+ for (i = 0; i < info->sector_count; i++)
+ if (info->protect[i]) {
+ addr = (vu_long *)(info->start[i]);
+ *addr = INTEL_LOCKBIT; /* Sector lock bit */
+ *addr = INTEL_PROTECT; /* set */
+ udelay(CFG_FLASH_LOCK_TOUT * 1000);
+ }
- /* re-enable interrupts if necessary */
if (flag)
enable_interrupts();
- /* data polling for D7 */
- start = get_timer (0);
- flag = 0;
- while (((csr = *addr) & 0x80808080) != 0x80808080) {
- if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
- flag = 1;
- break;
- }
- }
- if (csr & 0x40404040) {
- printf ("CSR indicates write error (%08lx) at %08lx\n", csr, (ulong)addr);
- flag = 1;
- }
-
- /* Clear Status Registers Command */
- *addr = 0x50505050;
- /* Reset to read array mode */
- *addr = 0xFFFFFFFF;
+ *addr = INTEL_RESET; /* Reset to read array mode */
- return (flag);
+ return rc;
}
/*-----------------------------------------------------------------------
- * Clear Block Lock Bit, returns:
- * 0 - OK
- * 1 - Timeout
+ * Support for flash file system (JFFS2)
+ *
+ * We use custom partition info function because we have to fit the
+ * file system image between first sector (containing hard reset
+ * configuration word) and the sector containing U-Boot image. Standard
+ * partition info function does not allow for last sector specification
+ * and assumes that the file system occupies flash bank up to and
+ * including bank's last sector.
*/
+#if (CONFIG_COMMANDS & CFG_CMD_JFFS2) && defined(CFG_JFFS_CUSTOM_PART)
-static int clear_block_lock_bit(vu_long * addr)
-{
- ulong start, now;
+#ifndef CFG_JFFS2_FIRST_SECTOR
+#define CFG_JFFS2_FIRST_SECTOR 0
+#endif
+#ifndef CFG_JFFS2_FIRST_BANK
+#define CFG_JFFS2_FIRST_BANK 0
+#endif
+#ifndef CFG_JFFS2_NUM_BANKS
+#define CFG_JFFS2_NUM_BANKS 1
+#endif
+#define CFG_JFFS2_LAST_BANK (CFG_JFFS2_FIRST_BANK + CFG_JFFS2_NUM_BANKS - 1)
- /* Reset Array */
- *addr = 0xffffffff;
- /* Clear Status Register */
- *addr = 0x50505050;
+#include <jffs2/jffs2.h>
- *addr = 0x60606060;
- *addr = 0xd0d0d0d0;
+static struct part_info partition;
- start = get_timer (0);
- while(*addr != 0x80808080){
- if ((now=get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
- printf ("Timeout on clearing Block Lock Bit\n");
- *addr = 0xFFFFFFFF; /* reset bank */
- return 1;
+struct part_info *jffs2_part_info(int part_num)
+{
+ int i;
+
+ if (part_num == 0) {
+ if (partition.usr_priv == 0) {
+ partition.offset =
+ (unsigned char *) flash_info[CFG_JFFS2_FIRST_BANK].start[CFG_JFFS2_FIRST_SECTOR];
+ for (i = CFG_JFFS2_FIRST_BANK; i <= CFG_JFFS2_LAST_BANK; i++)
+ partition.size += flash_info[i].size;
+ partition.size -=
+ flash_info[CFG_JFFS2_FIRST_BANK].start[CFG_JFFS2_FIRST_SECTOR] -
+ flash_info[CFG_JFFS2_FIRST_BANK].start[0];
+#ifdef CFG_JFFS2_LAST_SECTOR
+ i = flash_info[CFG_JFFS2_LAST_BANK].sector_count - 1;
+ partition.size -=
+ flash_info[CFG_JFFS2_LAST_BANK].start[i] -
+ flash_info[CFG_JFFS2_LAST_BANK].start[CFG_JFFS2_LAST_SECTOR];
+#endif
+
+ partition.usr_priv = (void *)1;
}
+ return &partition;
}
return 0;
}
+
+#endif /* JFFS2 */
#endif /* CFG_CMD_SPI */
#endif /* CONFIG_MISC_INIT_R */
+
+#ifdef CONFIG_POST
+/*
+ * Returns 1 if keys pressed to start the power-on long-running tests
+ * Called from board_init_f().
+ */
+int post_hotkeys_pressed(void)
+{
+ return 0; /* No hotkeys supported */
+}
+
+#endif
case IH_CPU_SH: arch = "SuperH"; break;
case IH_CPU_SPARC: arch = "SPARC"; break;
case IH_CPU_SPARC64: arch = "SPARC 64 Bit"; break;
+ case IH_CPU_M68K: arch = "M68K"; break;
default: arch = "Unknown Architecture"; break;
}
* to port numbers). Documentation uses 1-based numbering.
*/
#define BRG_INT_CLK gd->brg_clk
-#define BRG_UART_CLK ((BRG_INT_CLK + 15) / 16)
+#define BRG_UART_CLK (BRG_INT_CLK / 16)
-/* This function is used by UARTS, or anything else that uses a 16x
+/* This function is used by UARTs, or anything else that uses a 16x
* oversampled clock.
*/
void
volatile immap_t *immr = (immap_t *)CFG_IMMR;
volatile uint *bp;
+ uint cd = BRG_UART_CLK / rate;
- /* This is good enough to get SMCs running.....
- */
+ if ((BRG_UART_CLK % rate) < (rate / 2))
+ cd--;
if (brg < 4) {
bp = (uint *)&immr->im_brgc1;
}
brg -= 4;
}
bp += brg;
- *bp = (((((BRG_UART_CLK+rate-1)/rate)-1)&0xfff)<<1)|CPM_BRG_EN;
+ *bp = (cd << 1) | CPM_BRG_EN;
}
/* This function is used to set high speed synchronous baud rate
*/
/*
- * CPU specific code for the MPC8255 / MPC8260 CPUs
+ * CPU specific code for the MPC825x / MPC826x / MPC827x / MPC828x
*
* written or collected and sometimes rewritten by
* Magnus Damm <damm@bitsmart.com>
*
* added 8260 masks by
* Marius Groeger <mag@sysgo.de>
+ *
+ * added HiP7 (8270/8275/8280) processors support by
+ * Yuli Barcohen <yuli@arabellasw.com>
*/
#include <common.h>
puts ("CPU: ");
- if (((pvr >> 16) & 0xff) != 0x81)
+ switch (pvr) {
+ case PVR_8260:
+ case PVR_8260_HIP3:
+ k = 3;
+ break;
+ case PVR_8260_HIP4:
+ k = 4;
+ break;
+ case PVR_8260_HIP7:
+ k = 7;
+ break;
+ default:
return -1; /* whoops! not an MPC8260 */
+ }
rev = pvr & 0xff;
immr = immap->im_memctl.memc_immr;
if ((immr & IMMR_ISB_MSK) != CFG_IMMR)
return -1; /* whoops! someone moved the IMMR */
- printf (CPU_ID_STR " (Rev %02x, Mask ", rev);
+ printf (CPU_ID_STR " (HiP%d Rev %02x, Mask ", k, rev);
/*
* the bottom 16 bits of the immr are the Part Number and Mask Number
case 0x0062:
printf ("B.1 4K25A");
break;
+ case 0x0A00:
+ printf ("0.0 0K49M");
+ break;
+ case 0x0A01:
+ printf ("0.1 1K49M");
+ break;
default:
printf ("unknown [immr=0x%04x,k=0x%04x]", m, k);
break;
scmr = immap->im_clkrst.car_scmr;
corecnf = (scmr & SCMR_CORECNF_MSK) >> SCMR_CORECNF_SHIFT;
- busdf = (scmr & SCMR_BUSDF_MSK) >> SCMR_BUSDF_SHIFT;
- cpmdf = (scmr & SCMR_CPMDF_MSK) >> SCMR_CPMDF_SHIFT;
- plldf = (scmr & SCMR_PLLDF) ? 1 : 0;
- pllmf = (scmr & SCMR_PLLMF_MSK) >> SCMR_PLLMF_SHIFT;
-
cp = &corecnf_tab[corecnf];
- gd->vco_out = (clkin * 2 * (pllmf + 1)) / (plldf + 1);
+ busdf = (scmr & SCMR_BUSDF_MSK) >> SCMR_BUSDF_SHIFT;
+ cpmdf = (scmr & SCMR_CPMDF_MSK) >> SCMR_CPMDF_SHIFT;
+ if (get_pvr () == PVR_8260_HIP7) { /* HiP7 */
+ pllmf = (scmr & SCMR_PLLMF_MSKH7) >> SCMR_PLLMF_SHIFT;
+ gd->vco_out = clkin * (pllmf + 1);
+ } else { /* HiP3, HiP4 */
+ pllmf = (scmr & SCMR_PLLMF_MSK) >> SCMR_PLLMF_SHIFT;
+ plldf = (scmr & SCMR_PLLDF) ? 1 : 0;
+ gd->vco_out = (clkin * 2 * (pllmf + 1)) / (plldf + 1);
+ }
#if 0
if (gd->vco_out / (busdf + 1) != clkin) {
/* aaarrrggghhh!!! */
/* ** HEADER FILES */
/************************************************************************/
+/* #define DEBUG */
+
#include <config.h>
#include <common.h>
#include <watchdog.h>
/* Now turn on LCD_ON */
immr->im_cpm.cp_pbdat |= 0x00001000;
#endif
+#ifdef CONFIG_RRVISION
+ debug ("PC4->Output(1): enable LVDS\n");
+ debug ("PC5->Output(0): disable PAL clock\n");
+ immr->im_ioport.iop_pddir |= 0x1000;
+ immr->im_ioport.iop_pcpar &= ~(0x0C00);
+ immr->im_ioport.iop_pcdir |= 0x0C00 ;
+ immr->im_ioport.iop_pcdat |= 0x0800 ;
+ immr->im_ioport.iop_pcdat &= ~(0x0400);
+ debug ("PDPAR=0x%04X PDDIR=0x%04X PDDAT=0x%04X\n",
+ immr->im_ioport.iop_pdpar,
+ immr->im_ioport.iop_pddir,
+ immr->im_ioport.iop_pddat);
+ debug ("PCPAR=0x%04X PCDIR=0x%04X PCDAT=0x%04X\n",
+ immr->im_ioport.iop_pcpar,
+ immr->im_ioport.iop_pcdir,
+ immr->im_ioport.iop_pcdat);
+#endif
}
/*----------------------------------------------------------------------*/
* MA 02111-1307 USA
*/
-/* #define DEBUG */
+/* #define DEBUG */
/************************************************************************/
/* ** HEADER FILES */
#define VIDEO_I2C_ADDR CONFIG_VIDEO_ENCODER_AD7177_ADDR
#endif
+#ifdef CONFIG_VIDEO_ENCODER_AD7179
+
+#include <video_ad7179.h> /* Sets encoder data, mode, and visible and active area */
+
+#define VIDEO_I2C 1
+#define VIDEO_I2C_ADDR CONFIG_VIDEO_ENCODER_AD7179_ADDR
+#endif
+
/************************************************************************/
/* ** VIDEO MODE CONSTANTS */
/************************************************************************/
/* ** CONSOLE CONSTANTS */
/************************************************************************/
-#ifdef CONFIG_VIDEO_LOGO
+#ifdef CONFIG_VIDEO_LOGO
#define CONSOLE_ROWS ((VIDEO_ROWS - VIDEO_LOGO_HEIGHT) / VIDEO_FONT_HEIGHT)
#define VIDEO_LOGO_SKIP (VIDEO_COLS - VIDEO_LOGO_WIDTH)
#else
#endif
#define CONSOLE_COLS (VIDEO_COLS / VIDEO_FONT_WIDTH)
-#define CONSOLE_ROW_SIZE (VIDEO_FONT_HEIGHT * VIDEO_LINE_LEN)
+#define CONSOLE_ROW_SIZE (VIDEO_FONT_HEIGHT * VIDEO_LINE_LEN)
#define CONSOLE_ROW_FIRST (video_console_address)
-#define CONSOLE_ROW_SECOND (video_console_address + CONSOLE_ROW_SIZE)
+#define CONSOLE_ROW_SECOND (video_console_address + CONSOLE_ROW_SIZE)
#define CONSOLE_ROW_LAST (video_console_address + CONSOLE_SIZE - CONSOLE_ROW_SIZE)
-#define CONSOLE_SIZE (CONSOLE_ROW_SIZE * CONSOLE_ROWS)
+#define CONSOLE_SIZE (CONSOLE_ROW_SIZE * CONSOLE_ROWS)
#define CONSOLE_SCROLL_SIZE (CONSOLE_SIZE - CONSOLE_ROW_SIZE)
/*
/* Calculate YUV values (0-255) from RGB beetween 0-100 */
YUYV.Y1 = YUYV.Y2 = 209 * (pR + pG + pB) / 300 + 16;
- YUYV.U = pR - (pG * 3 / 4) - (pB / 4) + 128;
- YUYV.V = pB - (pR / 4) - (pG * 3 / 4) + 128;
+ YUYV.U = pR - (pG * 3 / 4) - (pB / 4) + 128;
+ YUYV.V = pB - (pR / 4) - (pG * 3 / 4) + 128;
return *ret;
#endif
#ifdef VIDEO_MODE_RGB
/* ** VIDEO CONTROLLER LOW-LEVEL FUNCTIONS */
/************************************************************************/
+#if !defined(CONFIG_RRVISION)
static void video_mode_dupefield (VRAM * source, VRAM * dest, int entries)
{
int i;
dest[0].lcyc++; /* Add a cycle to the first entry */
dest[entries - 1].lst = 1; /* Set end of ram entries */
}
+#endif
static void inline video_mode_addentry (VRAM * vr,
int Hx, int Vx, int Fx, int Bx,
vr->lst = LST;
}
-#define ADDENTRY(a,b,c,d,e,f,g,h,i) video_mode_addentry(&vr[entry++],a,b,c,d,e,f,g,h,i)
+#define ADDENTRY(a,b,c,d,e,f,g,h,i) video_mode_addentry(&vr[entry++],a,b,c,d,e,f,g,h,i)
static int video_mode_generate (void)
{
Y1 = video_panning_value_y & 0xfffe;
Y2 = DY - Y1;
+ debug("X1=%d, X2=%d, Y1=%d, Y2=%d, DX=%d, DY=%d VIDEO_COLS=%d \n",
+ X1, X2, Y1, Y2, DX, DY, VIDEO_COLS);
+
#ifdef VIDEO_MODE_NTSC
/*
- * Hx Vx Fx Bx VDS INT LCYC LP LST
+ * Hx Vx Fx Bx VDS INT LCYC LP LST
*
* Retrace blanking
*/
#endif
#ifdef VIDEO_MODE_PAL
+
+#if defined(CONFIG_RRVISION)
+
+#define HPW 160 /* horizontal pulse width (was 139) */
+#define VPW 2 /* vertical pulse width */
+#define HBP 104 /* horizontal back porch (was 112) */
+#define VBP 19 /* vertical back porch (was 19) */
+#define VID_R 240 /* number of rows */
+
+ debug ("[VIDEO CTRL] Starting to add controller entries...");
+/*
+ * Even field
+ */
+ ADDENTRY (0, 3, 0, 3, 1, 0, 2, 0, 0);
+ ADDENTRY (0, 0, 0, 3, 1, 0, HPW, 0, 0);
+ ADDENTRY (3, 0, 0, 3, 1, 0, HBP + (VIDEO_COLS * 2) + 72, 0, 0);
+
+ ADDENTRY (0, 0, 0, 3, 1, 0, VPW, 1, 0);
+ ADDENTRY (0, 0, 0, 3, 1, 0, HPW-1, 0, 0);
+ ADDENTRY (3, 0, 0, 3, 1, 0, HBP + (VIDEO_COLS * 2) + 72, 1, 0);
+
+ ADDENTRY (0, 3, 0, 3, 1, 0, VBP, 1, 0);
+ ADDENTRY (0, 3, 0, 3, 1, 0, HPW-1, 0, 0);
+ ADDENTRY (3, 3, 0, 3, 1, 0, HBP + (VIDEO_COLS * 2) + 72, 1, 0);
+/*
+ * Active area
+ */
+ ADDENTRY (0, 3, 0, 3, 1, 0, VID_R , 1, 0);
+ ADDENTRY (0, 3, 0, 3, 1, 0, HPW-1, 0, 0);
+ ADDENTRY (3, 3, 0, 3, 1, 0, HBP, 0, 0);
+ ADDENTRY (3, 3, 0, 3, 0, 0, VIDEO_COLS*2, 0, 0);
+ ADDENTRY (3, 3, 0, 3, 1, 0, 72, 1, 1);
+
+ ADDENTRY (0, 3, 0, 3, 1, 0, 51, 1, 0);
+ ADDENTRY (0, 3, 0, 3, 1, 0, HPW-1, 0, 0);
+ ADDENTRY (3, 3, 0, 3, 1, 0, HBP +(VIDEO_COLS * 2) + 72 , 1, 0);
+/*
+ * Odd field
+ */
+ ADDENTRY (0, 3, 0, 3, 1, 0, 2, 0, 0);
+ ADDENTRY (0, 0, 0, 3, 1, 0, HPW, 0, 0);
+ ADDENTRY (3, 0, 0, 3, 1, 0, HBP + (VIDEO_COLS * 2) + 72, 0, 0);
+
+ ADDENTRY (0, 0, 0, 3, 1, 0, VPW+1, 1, 0);
+ ADDENTRY (0, 0, 0, 3, 1, 0, HPW-1, 0, 0);
+ ADDENTRY (3, 0, 0, 3, 1, 0, HBP + (VIDEO_COLS * 2) + 72, 1, 0);
+
+ ADDENTRY (0, 3, 0, 3, 1, 0, VBP, 1, 0);
+ ADDENTRY (0, 3, 0, 3, 1, 0, HPW-1, 0, 0);
+ ADDENTRY (3, 3, 0, 3, 1, 0, HBP + (VIDEO_COLS * 2) + 72, 1, 0);
+/*
+ * Active area
+ */
+ ADDENTRY (0, 3, 0, 3, 1, 0, VID_R , 1, 0);
+ ADDENTRY (0, 3, 0, 3, 1, 0, HPW-1, 0, 0);
+ ADDENTRY (3, 3, 0, 3, 1, 0, HBP, 0, 0);
+ ADDENTRY (3, 3, 0, 3, 0, 0, VIDEO_COLS*2, 0, 0);
+ ADDENTRY (3, 3, 0, 3, 1, 0, 72, 1, 1);
+
+ ADDENTRY (0, 3, 0, 3, 1, 0, 51, 1, 0);
+ ADDENTRY (0, 3, 0, 3, 1, 0, HPW-1, 0, 0);
+ ADDENTRY (3, 3, 0, 3, 1, 0, HBP +(VIDEO_COLS * 2) + 72 , 1, 0);
+
+ debug ("done\n");
+
+#else /* !CONFIG_RRVISION */
+
/*
* Hx Vx Fx Bx VDS INT LCYC LP LST
*
* one more cycle loop and a last identifier)
*/
video_mode_dupefield (vr, &vr[entry], entry);
-#endif
+#endif /* CONFIG_RRVISION */
+
+#endif /* VIDEO_MODE_PAL */
/* See what FIFO are we using */
fifo = GETBIT (immap->im_vid.vid_vsr, VIDEO_VSR_CAS);
debug ("[VIDEO CTRL] Turning on video port led...\n");
SETBIT (*(int *) BCSR4, VIDEO_BCSR4_VIDLED_BIT, 0);
#endif
-
#ifdef CONFIG_RRVISION
- /* enable clock: set PD3 to VCLK, PC5 to HIGH */
- {
- volatile immap_t *immr = (immap_t *) CFG_IMMR;
-
- debug ("PDPAR=%04X PDDIR=%04X PDDAT=%04X\n",
- immr->im_ioport.iop_pdpar,
- immr->im_ioport.iop_pddir,
- immr->im_ioport.iop_pddat);
-
- debug ("[RRvision] PC5 -> Output (1): ");
- immr->im_ioport.iop_pcpar &= ~(0x0400);
- immr->im_ioport.iop_pcdir |= 0x0400 ;
- immr->im_ioport.iop_pcdat |= 0x0400 ;
- debug ("PCPAR=%04X PCDIR=%04X PCDAT=%04X\n",
- immr->im_ioport.iop_pcpar,
- immr->im_ioport.iop_pcdir,
- immr->im_ioport.iop_pcdat);
- }
+ debug ("PC5->Output(1): enable PAL clock");
+ immap->im_ioport.iop_pcpar &= ~(0x0400);
+ immap->im_ioport.iop_pcdir |= 0x0400 ;
+ immap->im_ioport.iop_pcdat |= 0x0400 ;
+ debug ("PDPAR=0x%04X PDDIR=0x%04X PDDAT=0x%04X\n",
+ immap->im_ioport.iop_pdpar,
+ immap->im_ioport.iop_pddir,
+ immap->im_ioport.iop_pddat);
+ debug ("PCPAR=0x%04X PCDIR=0x%04X PCDAT=0x%04X\n",
+ immap->im_ioport.iop_pcpar,
+ immap->im_ioport.iop_pcdir,
+ immap->im_ioport.iop_pcdat);
#endif /* CONFIG_RRVISION */
/* Blanking the screen. */
argument will be a pointer to the board info structure, while
the second will be a combination of bit flags specifying the
mode the test is running in (POST_POWERON, POST_NORMAL,
- POST_POWERFAIL, POST_MANUAL) and whether the last execution of
+ POST_SLOWTEST, POST_MANUAL) and whether the last execution of
the test caused system rebooting (POST_REBOOT). The routine will
return 0 on successful execution of the test, and 1 if the test
failed.
The lists of the POST tests that should be run at power-on/normal/
power-fail booting will be kept in the environment. Namely, the
following environment variables will be used: post_poweron,
-powet_normal, post_shutdown.
+powet_normal, post_slowtest.
2.1.2. Test results
"On-board peripherals test", "board", \
" This test performs full check-up of the " \
"on-board hardware.", \
- POST_RAM | POST_POWERFAIL, \
+ POST_RAM | POST_SLOWTEST, \
&board_post_test \
}
Using the CONFIG_AUTOBOOT_DELAY_STR2 / bootdelaykey2 and/or
CONFIG_AUTOBOOT_STOP_STR2 / bootstopkey #defines and/or
environment variables you can specify a second, alternate
- string (which allows you to haw two "password" strings).
+ string (which allows you to have two "password" strings).
CONFIG_ZERO_BOOTDELAY_CHECK
break;
}
- pci_read_config_dword(devno, PCI_BASE_ADDRESS_1, &iobase);
- iobase &= ~0xF; /* Masked out the low bits that are addresses. */
+ pci_read_config_dword(devno, PCI_BASE_ADDRESS_0, &iobase);
+ iobase &= ~0x3; /* bit 1: unused and bit 0: I/O Space Indicator */
pci_write_config_dword(devno, PCI_COMMAND,
PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
* Calculate sensor address and register.
*
*/
- sensor = DTT_I2C_DEV_CODE + (sensor & sensor);
+ sensor = DTT_I2C_DEV_CODE + (sensor & 0x07);
/*
* Handle various data sizes.
#ifdef CONFIG_POST
unsigned long post_log_word; /* Record POST activities */
unsigned long post_init_f_time; /* When post_init_f started */
+ unsigned long post_hotkeys_latch; /* If the post hotkeys pressed */
#endif
#ifdef CONFIG_BOARD_TYPES
unsigned long board_type;
#define PVR_860 PVR_821
#define PVR_7400 0x000C0000
#define PVR_8240 0x00810100
-#define PVR_8260 PVR_8240
+/*
+ * PowerQUICC II family processors report different PVR values depending
+ * on silicon process (HiP3, HiP4, HiP7, etc.)
+ */
+#define PVR_8260 PVR_8240
+#define PVR_8260_HIP3 0x00810101
+#define PVR_8260_HIP4 0x80811014
+#define PVR_8260_HIP7 0x80822011
/* I am just adding a single entry for 8260 boards. I think we may be
* able to combine mbx, fads, rpxlite, bseip, and classic into a single
#define PCI_ENET1_MEMADDR 0x81000000
#define PCI_ENET2_IOADDR 0x82000000
#define PCI_ENET2_MEMADDR 0x82000000
+#define PCI_ENET3_IOADDR 0x83000000
+#define PCI_ENET3_MEMADDR 0x83000000
/*-----------------------------------------------------------------------
#define CFG_FLASH_SIZE 8
#define CFG_FLASH_ERASE_TOUT 8000 /* Timeout for Flash Erase (in ms) */
#define CFG_FLASH_WRITE_TOUT 5 /* Timeout for Flash Write (in ms) */
+#define CFG_FLASH_LOCK_TOUT 5 /* Timeout for Flash Set Lock Bit (in ms) */
+#define CFG_FLASH_UNLOCK_TOUT 10000 /* Timeout for Flash Clear Lock Bits (in ms) */
+#define CFG_FLASH_PROTECTION /* "Real" (hardware) sectors protection */
+
+#define CFG_JFFS2_FIRST_SECTOR 1
+#define CFG_JFFS2_LAST_SECTOR 27
+#define CFG_JFFS2_SORT_FRAGMENTS
+#define CFG_JFFS_CUSTOM_PART
/* this is stuff came out of the Motorola docs */
#define CFG_DEFAULT_IMMR 0x0F010000
#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */
-#if 1
+#ifndef CONFIG_LCD
#define CONFIG_VIDEO 1 /* To enable the video initialization */
/* Video related */
#define CONFIG_VIDEO_LOGO 1 /* Show the logo */
-#define CONFIG_VIDEO_ENCODER_AD7176 1 /* Enable this encoder */
-#define CONFIG_VIDEO_ENCODER_AD7176_ADDR 0x2A /* ALSB to ground */
+#define CONFIG_VIDEO_ENCODER_AD7179 1 /* Enable this encoder */
+#define CONFIG_VIDEO_ENCODER_AD7179_ADDR 0x2A /* ALSB to ground */
#endif
/* enable I2C and select the hardware/software driver */
*-----------------------------------------------------------------------
*
*/
+/*#define CFG_DER 0x2002000F*/
#define CFG_DER 0
/*
#define CONFIG_MODEM_SUPPORT 1 /* enable modem initialization stuff */
#undef CONFIG_MODEM_SUPPORT_DEBUG
-#define CONFIG_MODEM_KEY_MAGIC "3C+3F" /* hold down these keys to enable modem */
-
+#define CONFIG_MODEM_KEY_MAGIC "3C+3F" /* press F3 + F6 keys to enable modem */
+#define CONFIG_POST_KEY_MAGIC "3C+3E" /* press F3 + F5 keys to force POST */
#endif /* __CONFIG_H */
#define IH_CPU_SH 9 /* SuperH */
#define IH_CPU_SPARC 10 /* Sparc */
#define IH_CPU_SPARC64 11 /* Sparc 64 Bit */
+#define IH_CPU_M68K 12 /* M68K */
/*
* Image Types
/*-----------------------------------------------------------------------
* SCMR - System Clock Mode Register 9-9
*/
-#define SCMR_CORECNF_MSK 0x1f000000 /* Core Configuration Mask */
+#define SCMR_CORECNF_MSK 0x1f000000 /* Core Configuration Mask */
#define SCMR_CORECNF_SHIFT 24
-#define SCMR_BUSDF_MSK 0x00f00000 /* 60x Bus Division Factor Mask */
-#define SCMR_BUSDF_SHIFT 20
-#define SCMR_CPMDF_MSK 0x000f0000 /* CPM Division Factor Mask */
-#define SCMR_CPMDF_SHIFT 16
-#define SCMR_PLLDF 0x00001000 /* PLL Pre-divider Value */
-#define SCMR_PLLMF_MSK 0x00000fff /* PLL Multiplication Factor Mask*/
+#define SCMR_BUSDF_MSK 0x00f00000 /* 60x Bus Division Factor Mask */
+#define SCMR_BUSDF_SHIFT 20
+#define SCMR_CPMDF_MSK 0x000f0000 /* CPM Division Factor Mask */
+#define SCMR_CPMDF_SHIFT 16
+#define SCMR_PLLDF 0x00001000 /* PLL Pre-divider Value */
+#define SCMR_PLLMF_MSK 0x00000fff /* PLL Multiplication Factor Mask*/
+#define SCMR_PLLMF_MSKH7 0x0000000f /* for HiP7 processors */
#define SCMR_PLLMF_SHIFT 0
#ifdef CONFIG_POST
#define POST_POWERON 0x01 /* test runs on power-on booting */
-#define POST_POWERNORMAL 0x02 /* test runs on normal booting */
-#define POST_POWERFAIL 0x04 /* test runs on power-fail booting */
+#define POST_NORMAL 0x02 /* test runs on normal booting */
+#define POST_SLOWTEST 0x04 /* test is slow, enabled by key press */
#define POST_POWERTEST 0x08 /* test runs after watchdog reset */
#define POST_ROM 0x0100 /* test runs in ROM */
#define POST_PREREL 0x1000 /* test runs before relocation */
#define POST_MEM (POST_RAM | POST_ROM)
-#define POST_ALWAYS (POST_POWERNORMAL | \
- POST_POWERFAIL | \
- POST_MANUAL | \
+#define POST_ALWAYS (POST_NORMAL | \
+ POST_SLOWTEST | \
+ POST_MANUAL | \
POST_POWERON )
#ifndef __ASSEMBLY__
extern struct post_test post_list[];
extern unsigned int post_list_size;
+extern int post_hotkeys_pressed(gd_t *);
#endif /* __ASSEMBLY__ */
#ifndef __VERSION_H__
#define __VERSION_H__
-#define U_BOOT_VERSION "U-Boot 0.4.2"
+#define U_BOOT_VERSION "U-Boot 0.4.3"
#endif /* __VERSION_H__ */
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
#define VIDEO_ENCODER_NAME "Analog Devices AD7176"
-#define VIDEO_ENCODER_I2C_RATE 100000 /* Max rate is 100Khz */
+#define VIDEO_ENCODER_I2C_RATE 100000 /* Max rate is 100 kHz */
#define VIDEO_ENCODER_CB_Y_CR_Y /* Use CB Y CR Y format... */
-#define VIDEO_MODE_YUYV /* The only mode supported by this encoder */
-#undef VIDEO_MODE_RGB
+#define VIDEO_MODE_YUYV /* The only mode supported by this encoder */
+#undef VIDEO_MODE_RGB
#define VIDEO_MODE_BPP 16
-#ifdef VIDEO_MODE_PAL
+#ifdef VIDEO_MODE_PAL
#define VIDEO_ACTIVE_COLS 720
#define VIDEO_ACTIVE_ROWS 576
#define VIDEO_VISIBLE_COLS 640
#define VIDEO_VISIBLE_ROWS 480
#endif
-#ifdef VIDEO_MODE_NTSC
+#ifdef VIDEO_MODE_NTSC
#define VIDEO_ACTIVE_COLS 720
#define VIDEO_ACTIVE_ROWS 525
#define VIDEO_VISIBLE_COLS 640
0x82,
#else
0x02, /* Mode Register 1 */
-#endif
+#endif /* VIDEO_DEBUG_COLORBARS */
0x16, /* Subcarrier Freq 0 */
0x7c, /* Subcarrier Freq 1 */
0xf0, /* Subcarrier Freq 2 */
0x82,
#else
0x02, /* Mode Register 1 (2) */
-#endif
+#endif /* VIDEO_DEBUG_COLORBARS */
0xcb, /* Subcarrier Freq 0 */
0x8a, /* Subcarrier Freq 1 */
0x09, /* Subcarrier Freq 2 */
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
#ifndef _VIDEO_AD7177_H_
#define _VIDEO_AD7177_H_
-/*#define VIDEO_DEBUG_DISABLE_COLORS 0 */
+/* #define VIDEO_DEBUG_DISABLE_COLORS 0 */
#define VIDEO_ENCODER_NAME "Analog Devices AD7177"
-#define VIDEO_ENCODER_I2C_RATE 100000 /* Max rate is 100Khz */
-#define VIDEO_ENCODER_CB_Y_CR_Y /* Use CB Y CR Y format... */
+#define VIDEO_ENCODER_I2C_RATE 100000 /* Max rate is 100 kHz */
+#define VIDEO_ENCODER_CB_Y_CR_Y /* Use CB Y CR Y format... */
#define VIDEO_MODE_YUYV /* The only mode supported by this encoder */
-#undef VIDEO_MODE_RGB
+#undef VIDEO_MODE_RGB
#define VIDEO_MODE_BPP 16
-#ifdef VIDEO_MODE_PAL
+#ifdef VIDEO_MODE_PAL
#define VIDEO_ACTIVE_COLS 720
#define VIDEO_ACTIVE_ROWS 576
#define VIDEO_VISIBLE_COLS 640
#define VIDEO_VISIBLE_ROWS 480
#endif
-#ifdef VIDEO_MODE_NTSC
+#ifdef VIDEO_MODE_NTSC
#define VIDEO_ACTIVE_COLS 720
#define VIDEO_ACTIVE_ROWS 525
#define VIDEO_VISIBLE_COLS 640
static unsigned char
video_encoder_data[] = {
#ifdef VIDEO_MODE_NTSC
- 0x04, /* Mode Register 0 */
+ 0x04, /* Mode Register 0 */
#ifdef VIDEO_DEBUG_COLORBARS
0xc2,
#else
- 0x42, /* Mode Register 1 */
-#endif
- 0x16, /* Subcarrier Freq 0 */
- 0x7c, /* Subcarrier Freq 1 */
- 0xf0, /* Subcarrier Freq 2 */
- 0x21, /* Subcarrier Freq 3 */
- 0x00, /* Subcarrier phase */
- 0x02, /* Timing Register 0 */
- 0x00, /* Extended Captioning 0 */
- 0x00, /* Extended Captioning 1 */
- 0x00, /* Closed Captioning 0 */
- 0x00, /* Closed Captioning 1 */
- 0x00, /* Timing Register 1 */
- 0x08, /* Mode Register 2 */
- 0x00, /* Pedestal Register 0 */
- 0x00, /* Pedestal Register 1 */
- 0x00, /* Pedestal Register 2 */
- 0x00, /* Pedestal Register 3 */
- 0x08 /* Mode Register 3 */
+ 0x42, /* Mode Register 1 */
+#endif /* VIDEO_DEBUG_COLORBARS */
+ 0x16, /* Subcarrier Freq 0 */
+ 0x7c, /* Subcarrier Freq 1 */
+ 0xf0, /* Subcarrier Freq 2 */
+ 0x21, /* Subcarrier Freq 3 */
+ 0x00, /* Subcarrier phase */
+ 0x02, /* Timing Register 0 */
+ 0x00, /* Extended Captioning 0 */
+ 0x00, /* Extended Captioning 1 */
+ 0x00, /* Closed Captioning 0 */
+ 0x00, /* Closed Captioning 1 */
+ 0x00, /* Timing Register 1 */
+ 0x08, /* Mode Register 2 */
+ 0x00, /* Pedestal Register 0 */
+ 0x00, /* Pedestal Register 1 */
+ 0x00, /* Pedestal Register 2 */
+ 0x00, /* Pedestal Register 3 */
+ 0x08, /* Mode Register 3 */
+
+#endif /* VIDEO_MODE_NTSC */
-#endif
#ifdef VIDEO_MODE_PAL
#ifdef VIDEO_MODE_RGB_OUT
- 0x69, /* Mode Register 0 */
+ 0x69, /* Mode Register 0 */
#ifdef VIDEO_DEBUG_COLORBARS
- 0xc0, /* Mode Register 1 (c0) */
+ 0xc0, /* Mode Register 1 (c0) */
#else
- 0x40, /* Mode Register 1 (c0) */
-#endif
- 0xcb, /* Subcarrier Freq 0 */
- 0x8a, /* Subcarrier Freq 1 */
- 0x09, /* Subcarrier Freq 2 */
- 0x2a, /* Subcarrier Freq 3 */
- 0x00, /* Subcarrier phase */
- 0x02, /* Timing Register 0 */
- 0x00, /* Extended Captioning 0 */
- 0x00, /* Extended Captioning 1 */
- 0x00, /* Closed Captioning 0 */
- 0x00, /* Closed Captioning 1 */
- 0x00, /* Timing Register 1 */
- 0x28, /* Mode Register 2 */
- 0x00, /* Pedestal Register 0 */
- 0x00, /* Pedestal Register 1 */
- 0x00, /* Pedestal Register 2 */
- 0x00, /* Pedestal Register 3 */
- 0x08 /* Mode Register 3 */
+ 0x40, /* Mode Register 1 (c0) */
+#endif /* VIDEO_DEBUG_COLORBARS */
+ 0xcb, /* Subcarrier Freq 0 */
+ 0x8a, /* Subcarrier Freq 1 */
+ 0x09, /* Subcarrier Freq 2 */
+ 0x2a, /* Subcarrier Freq 3 */
+ 0x00, /* Subcarrier phase */
+ 0x02, /* Timing Register 0 */
+ 0x00, /* Extended Captioning 0 */
+ 0x00, /* Extended Captioning 1 */
+ 0x00, /* Closed Captioning 0 */
+ 0x00, /* Closed Captioning 1 */
+ 0x00, /* Timing Register 1 */
+ 0x28, /* Mode Register 2 */
+ 0x00, /* Pedestal Register 0 */
+ 0x00, /* Pedestal Register 1 */
+ 0x00, /* Pedestal Register 2 */
+ 0x00, /* Pedestal Register 3 */
+ 0x08, /* Mode Register 3 */
-#else
+#else /* ! VIDEO_MODE_RGB_OUT */
0x09, /* Mode Register 0 (was 01) */
#ifdef VIDEO_DEBUG_COLORBARS
- 0xd8, /* */
+ 0xd8, /* */
#else
0x59, /* Mode Register 1 (was 58) */
-#endif
- 0xcb, /* Subcarrier Freq 0 */
- 0x8a, /* Subcarrier Freq 1 */
- 0x09, /* Subcarrier Freq 2 */
- 0x2a, /* Subcarrier Freq 3 */
- 0x00, /* Subcarrier phase */
+#endif /* VIDEO_DEBUG_COLORBARS */
+ 0xcb, /* Subcarrier Freq 0 */
+ 0x8a, /* Subcarrier Freq 1 */
+ 0x09, /* Subcarrier Freq 2 */
+ 0x2a, /* Subcarrier Freq 3 */
+ 0x00, /* Subcarrier phase */
0x02, /* Timing Register 0 (was a) */
- 0x00, /* Extended Captioning 0 */
- 0x00, /* Extended Captioning 1 */
- 0x00, /* Closed Captioning 0 */
- 0x00, /* Closed Captioning 1 */
- 0x00, /* Timing Register 1 */
+ 0x00, /* Extended Captioning 0 */
+ 0x00, /* Extended Captioning 1 */
+ 0x00, /* Closed Captioning 0 */
+ 0x00, /* Closed Captioning 1 */
+ 0x00, /* Timing Register 1 */
#ifdef VIDEO_DEBUG_LOWPOWER
#ifdef VIDEO_DEBUG_DISABLE_COLORS
- 0x98, /* Mode Register 2 */
-#else
- 0x88, /* Mode Register 2 */
-#endif
+ 0x98, /* Mode Register 2 */
#else
+ 0x88, /* Mode Register 2 */
+#endif /* VIDEO_DEBUG_DISABLE_COLORS */
+#else /* ! VIDEO_DEBUG_LOWPOWER */
#ifdef VIDEO_DEBUG_DISABLE_COLORS
- 0x18, /* Mode Register 2 */
+ 0x18, /* Mode Register 2 */
#else
- 0x08, /* Mode Register 2 */
-#endif
-#endif
- 0x00, /* Pedestal Register 0 */
- 0x00, /* Pedestal Register 1 */
- 0x00, /* Pedestal Register 2 */
- 0x00, /* Pedestal Register 3 */
- 0x08 /* Mode Register 3 */
-#endif
-#endif
+ 0x08, /* Mode Register 2 */
+#endif /* VIDEO_DEBUG_DISABLE_COLORS */
+#endif /* VIDEO_DEBUG_LOWPOWER */
+ 0x00, /* Pedestal Register 0 */
+ 0x00, /* Pedestal Register 1 */
+ 0x00, /* Pedestal Register 2 */
+ 0x00, /* Pedestal Register 3 */
+ 0x08 /* Mode Register 3 */
+#endif /* VIDEO_MODE_RGB_OUT */
+#endif /* VIDEO_MODE_PAL */
} ;
-#endif
+#endif /* _VIDEO_AD7177_H_ */
--- /dev/null
+/*
+ * (C) Copyright 2003 Wolfgang Grandegger <wg@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _VIDEO_AD7179_H_
+#define _VIDEO_AD7179_H_
+
+/*
+ * The video encoder data are board specific now!
+ */
+
+#if defined(CONFIG_RRVISION)
+#include "../board/RRvision/video_ad7179.h"
+#else
+#error "Please provide a board-specific video_ad7179.h"
+#endif
+
+#endif /* _VIDEO_AD7179_H_ */
#ifdef CONFIG_POST
post_run (NULL, POST_RAM | post_bootmode_get(0));
- if (post_bootmode_get(0) & POST_POWERFAIL) {
+ if (post_bootmode_get(0) & POST_SLOWTEST) {
post_bootmode_clear();
board_poweroff();
}
#ifdef CONFIG_POST
post_bootmode_init();
- post_run (NULL, POST_ROM | post_bootmode_get(0));
+ if (post_hotkeys_pressed(gd)) /* Force the long-running tests (memory) */
+ post_run (NULL, POST_ROM | POST_SLOWTEST);
+ else
+ post_run (NULL, POST_ROM | post_bootmode_get(0));
#endif
WATCHDOG_RESET();
#endif
#ifdef CONFIG_POST
- post_run (NULL, POST_RAM | post_bootmode_get(0));
- if (post_bootmode_get(0) & POST_POWERFAIL) {
+ if (gd->post_hotkeys_latch)
+ post_run (NULL, POST_RAM | POST_SLOWTEST);
+ else
+ post_run (NULL, POST_RAM | post_bootmode_get(0));
+ if (post_bootmode_get(0) & POST_SLOWTEST) {
post_bootmode_clear();
board_poweroff();
}
* regions of RAM around each 1Mb boundary. For example, for 64Mb
* RAM the following areas are verified: 0x00000000-0x00000800,
* 0x000ff800-0x00100800, 0x001ff800-0x00200800, ..., 0x03fff800-
- * 0x04000000. If the test is run in power-fail mode, it verifies
+ * 0x04000000. If the test is run in slow-test mode, it verifies
* the whole RAM.
*/
256 << 20 : bd->bi_memsize) - (1 << 20);
- if (flags & POST_POWERFAIL) {
+ if (flags & POST_SLOWTEST) {
ret = memory_post_tests (CFG_SDRAM_BASE, memsize);
- } else { /* POST_POWERNORMAL */
+ } else { /* POST_NORMAL */
unsigned long i;
if (bootmode == 0) {
bootmode = POST_POWERON;
} else if (bootmode == POST_POWERON) {
- bootmode = POST_POWERNORMAL;
+ bootmode = POST_NORMAL;
} else {
return;
}
static void post_get_flags (int *test_flags)
{
- int flag[] = { POST_POWERON, POST_POWERNORMAL, POST_POWERFAIL };
- char *var[] = { "post_poweron", "post_normal", "post_shutdown" };
+ int flag[] = { POST_POWERON, POST_NORMAL, POST_SLOWTEST };
+ char *var[] = { "post_poweron", "post_normal", "post_slowtest" };
int varnum = sizeof (var) / sizeof (var[0]);
char list[128]; /* long enough for POST list */
char *name;
void (*exec_before)(sysmon_table_t *);
void (*exec_after)(sysmon_table_t *);
+ int unit_precision;
int unit_div;
int unit_min;
int unit_max;
uint val_min;
uint val_max;
int val_valid;
+ uint val_min_alt;
+ uint val_max_alt;
+ int val_valid_alt;
uint addr;
};
static sysmon_table_t sysmon_table[] =
{
{"Board temperature", " C", &sysmon_lm87_sgn, NULL, sysmon_ccfl_disable,
- 1, -128, 127, 0xFF, 0x58, 0xD5, 0, 0x27},
+ 1, 1, -128, 127, 0xFF, 0x58, 0xD5, 0, 0x67, 0xC6, 0, 0x27},
{"Front temperature", " C", &sysmon_lm87, NULL, sysmon_ccfl_disable,
- 100, -27316, 8984, 0xFF, 0xA4, 0xFC, 0, 0x29},
+ 1, 100, -27316, 8984, 0xFF, 0xA4, 0xFC, 0, 0xAE, 0xF1, 0, 0x29},
{"+3.3V CPU logic", "V", &sysmon_lm87, NULL, NULL,
- 1000, 0, 4386, 0xFF, 0xB6, 0xC9, 0, 0x22},
+ 100, 1000, 0, 4386, 0xFF, 0xB6, 0xC9, 0, 0xB6, 0xC9, 0, 0x22},
- {"+5V logic", "V", &sysmon_lm87, NULL, NULL,
- 1000, 0, 6630, 0xFF, 0xB6, 0xCA, 0, 0x23},
+ {"+ 5 V logic", "V", &sysmon_lm87, NULL, NULL,
+ 100, 1000, 0, 6630, 0xFF, 0xB6, 0xCA, 0, 0xB6, 0xCA, 0, 0x23},
- {"+12V PCMCIA", "V", &sysmon_lm87, NULL, NULL,
- 1000, 0, 15460, 0xFF, 0xBC, 0xD0, 0, 0x21},
+ {"+12 V PCMCIA", "V", &sysmon_lm87, NULL, NULL,
+ 100, 1000, 0, 15460, 0xFF, 0xBC, 0xD0, 0, 0xBC, 0xD0, 0, 0x21},
- {"+12V CCFL", "V", &sysmon_lm87, NULL, sysmon_ccfl_enable,
- 1000, 0, 15900, 0xFF, 0xB6, 0xCA, 0, 0x24},
+ {"+12 V CCFL", "V", &sysmon_lm87, NULL, sysmon_ccfl_enable,
+ 100, 1000, 0, 15900, 0xFF, 0xB6, 0xCA, 0, 0xB6, 0xCA, 0, 0x24},
- {"+5V standby", "V", &sysmon_pic, NULL, NULL,
- 1000, 0, 6040, 0xFF, 0xC8, 0xDE, 0, 0x7C},
+ {"+ 5 V standby", "V", &sysmon_pic, NULL, NULL,
+ 100, 1000, 0, 6040, 0xFF, 0xC8, 0xDE, 0, 0xC8, 0xDE, 0, 0x7C},
};
static int sysmon_table_size = sizeof(sysmon_table) / sizeof(sysmon_table[0]);
}
}
-static char * sysmon_unit_value (sysmon_table_t * s, uint val)
+static char *sysmon_unit_value (sysmon_table_t *s, uint val)
{
static char buf[32];
int unit_val =
s->unit_min + (s->unit_max - s->unit_min) * val / s->val_mask;
- char * p;
+ char *p, sign;
int dec, frac;
- sprintf(buf, "%+d", unit_val / s->unit_div);
+ if (unit_val < 0) {
+ sign = '-';
+ unit_val = -unit_val;
+ } else {
+ sign = '+';
+ }
+
+ p = buf + sprintf(buf, "%c%2d", sign, unit_val / s->unit_div);
+
- frac = (unit_val > 0 ? unit_val : -unit_val) % s->unit_div;
- p = buf + strlen(buf);
+ frac = unit_val % s->unit_div;
- dec = s->unit_div;
+ frac /= (s->unit_div / s->unit_precision);
+
+ dec = s->unit_precision;
if (dec != 1)
{
*p++ = '.';
}
-
for (dec /= 10; dec != 0; dec /= 10)
{
- *p++ = '0' + frac / dec % 10;
+ *p++ = '0' + (frac / dec) % 10;
}
-
strcpy(p, s->unit_name);
return buf;
static void sysmon_ccfl_disable (sysmon_table_t * this)
{
- if (!this->val_valid)
+ if (!this->val_valid_alt)
{
sysmon_temp_invalid = 1;
}
val = t->sysmon->read(t->sysmon, t->addr);
t->val_valid = val >= t->val_min && val <= t->val_max;
+ t->val_valid_alt = val >= t->val_min_alt && val <= t->val_max_alt;
if (t->exec_after)
{
"Watchdog timer test",
"watchdog",
"This test checks the watchdog timer.",
- POST_RAM | POST_POWERON | POST_POWERFAIL | POST_MANUAL | POST_REBOOT,
+ POST_RAM | POST_POWERON | POST_SLOWTEST | POST_MANUAL | POST_REBOOT,
&watchdog_post_test,
NULL,
NULL,
"RTC test",
"rtc",
"This test verifies the RTC operation.",
- POST_RAM | POST_POWERFAIL | POST_MANUAL,
+ POST_RAM | POST_SLOWTEST | POST_MANUAL,
&rtc_post_test,
NULL,
NULL,
"Memory test",
"memory",
"This test checks RAM.",
- POST_ROM | POST_POWERON | POST_POWERFAIL | POST_PREREL,
+ POST_ROM | POST_POWERON | POST_SLOWTEST | POST_PREREL,
&memory_post_test,
NULL,
NULL,
"UART test",
"uart",
"This test verifies the UART operation.",
- POST_RAM | POST_POWERFAIL | POST_MANUAL,
+ POST_RAM | POST_SLOWTEST | POST_MANUAL,
&uart_post_test,
NULL,
NULL,
{ IH_CPU_SH, "sh", "SuperH", },
{ IH_CPU_SPARC, "sparc", "SPARC", },
{ IH_CPU_SPARC64, "sparc64", "SPARC 64 Bit", },
+ { IH_CPU_M68K, "m68k", "MC68000", },
{ -1, "", "", },
};
projects / karo-tx-uboot.git / commitdiff