]> git.kernelconcepts.de Git - karo-tx-uboot.git/commitdiff
mtd, spi: Add MTD layer driver
authorDaniel Schwierzeck <daniel.schwierzeck@gmail.com>
Mon, 27 Apr 2015 05:42:04 +0000 (07:42 +0200)
committerLothar Waßmann <LW@KARO-electronics.de>
Tue, 8 Sep 2015 22:47:15 +0000 (00:47 +0200)
Add MTD layer driver for spi, original patch from:
http://git.denx.de/?p=u-boot/u-boot-mips.git;a=commitdiff;h=bb246819cdc90493dd7089eaa51b9e639765cced

Changes from Heiko Schocher against this patch:
- Remove compile error if not defining CONFIG_SPI_FLASH_MTD:

  LD      drivers/mtd/spi/built-in.o
drivers/mtd/spi/sf_probe.o: In function `spi_flash_mtd_unregister':
/home/hs/abb/imx6/u-boot/drivers/mtd/spi/sf_internal.h:168: multiple definition of `spi_flash_mtd_unregister'
drivers/mtd/spi/sf_params.o:/home/hs/abb/imx6/u-boot/drivers/mtd/spi/sf_internal.h:168: first defined here
drivers/mtd/spi/sf_ops.o: In function `spi_flash_mtd_unregister':
/home/hs/abb/imx6/u-boot/drivers/mtd/spi/sf_internal.h:168: multiple definition of `spi_flash_mtd_unregister'
drivers/mtd/spi/sf_params.o:/home/hs/abb/imx6/u-boot/drivers/mtd/spi/sf_internal.h:168: first defined here
make[1]: *** [drivers/mtd/spi/built-in.o] Fehler 1
make: *** [drivers/mtd/spi] Fehler 2

- Add a README entry.
- Add correct writebufsize, to fit with Linux v3.14
  MTD, UBI/UBIFS sync.

Note (From Jagan): For testing raw mtd parition erase/read/write operations
using cmd_sf, sf_mtd should be required to register the spi flash device to
MTD layer but the sf_mtd_info ops were not required until and unless if we
use any flash filesystem layer say for example UBI. Due to this the foot-print
got increased ~290bytes in non-UBI case here that should be acceptible.

Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Signed-off-by: Heiko Schocher <hs@denx.de>
Tested-by: Jagannadh Teki <jteki@openedev.com>
Reviewed-by: Jagannadh Teki <jteki@openedev.com>
README
common/cmd_sf.c
drivers/mtd/spi/Makefile
drivers/mtd/spi/sf_internal.h
drivers/mtd/spi/sf_mtd.c [new file with mode: 0644]
drivers/mtd/spi/sf_probe.c

diff --git a/README b/README
index 82706a411078f320a8cbd7ff0f56e1d8a00cd9d8..09a15ab86333207f48b88d7bdba16cfec7cb39cd 100644 (file)
--- a/README
+++ b/README
@@ -3211,6 +3211,15 @@ CBFS (Coreboot Filesystem) support
                memories can be connected with a given cs line.
                Currently Xilinx Zynq qspi supports these type of connections.
 
+               CONFIG_SPI_FLASH_MTD            spi-flash MTD layer
+
+               Define this option to use mtd support for spi flash layer, this
+               adapter is for translating mtd_read/mtd_write commands into
+               spi_flash_read/spi_flash_write commands. It is not intended to
+               use it within sf_cmd or the SPI flash subsystem. Such an adapter
+               is needed for subsystems like UBI which can only operate on top
+               of the MTD layer.
+
 - SystemACE Support:
                CONFIG_SYSTEMACE
 
index 342021df97e79195aacaba4c756bb3737dcd98be..ed3e398ccd59fe2ff7a781f7200ac5a773a9b624 100644 (file)
@@ -139,8 +139,6 @@ static int do_spi_flash_probe(int argc, char * const argv[])
                return 1;
        }
 
-       if (flash)
-               spi_flash_free(flash);
        flash = new;
 #endif
 
index 87f20bc3ad46ba8a01fae3ab7c53c515cbc94704..ed46648aa37a3b45795ff3eb5e0678fad2933fd8 100644 (file)
@@ -18,5 +18,6 @@ obj-$(CONFIG_SPI_FLASH) += sf_probe.o
 obj-$(CONFIG_SF_DATAFLASH) += sf_dataflash.o
 obj-$(CONFIG_CMD_SF) += sf.o
 obj-$(CONFIG_SPI_FLASH) += sf_ops.o sf_params.o
+obj-$(CONFIG_SPI_FLASH_MTD) += sf_mtd.o
 obj-$(CONFIG_SPI_FLASH_SANDBOX) += sandbox.o
 obj-$(CONFIG_SPI_M95XXX) += eeprom_m95xxx.o
index 4158e1332286325eaca1306a1c7eaee1b75303a8..81eea8ce9dbacbbe2b25606c301b1658796d6d5c 100644 (file)
@@ -218,4 +218,9 @@ int spi_flash_read_common(struct spi_flash *flash, const u8 *cmd,
 int spi_flash_cmd_read_ops(struct spi_flash *flash, u32 offset,
                size_t len, void *data);
 
+#ifdef CONFIG_SPI_FLASH_MTD
+int spi_flash_mtd_register(struct spi_flash *flash);
+void spi_flash_mtd_unregister(void);
+#endif
+
 #endif /* _SF_INTERNAL_H_ */
diff --git a/drivers/mtd/spi/sf_mtd.c b/drivers/mtd/spi/sf_mtd.c
new file mode 100644 (file)
index 0000000..0b9cb62
--- /dev/null
@@ -0,0 +1,104 @@
+/*
+ * Copyright (C) 2012-2014 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ */
+
+#include <common.h>
+#include <malloc.h>
+#include <asm/errno.h>
+#include <linux/mtd/mtd.h>
+#include <spi_flash.h>
+
+static struct mtd_info sf_mtd_info;
+static char sf_mtd_name[8];
+
+static int spi_flash_mtd_erase(struct mtd_info *mtd, struct erase_info *instr)
+{
+       struct spi_flash *flash = mtd->priv;
+       int err;
+
+       instr->state = MTD_ERASING;
+
+       err = spi_flash_erase(flash, instr->addr, instr->len);
+       if (err) {
+               instr->state = MTD_ERASE_FAILED;
+               instr->fail_addr = MTD_FAIL_ADDR_UNKNOWN;
+               return -EIO;
+       }
+
+       instr->state = MTD_ERASE_DONE;
+       mtd_erase_callback(instr);
+
+       return 0;
+}
+
+static int spi_flash_mtd_read(struct mtd_info *mtd, loff_t from, size_t len,
+       size_t *retlen, u_char *buf)
+{
+       struct spi_flash *flash = mtd->priv;
+       int err;
+
+       err = spi_flash_read(flash, from, len, buf);
+       if (!err)
+               *retlen = len;
+
+       return err;
+}
+
+static int spi_flash_mtd_write(struct mtd_info *mtd, loff_t to, size_t len,
+       size_t *retlen, const u_char *buf)
+{
+       struct spi_flash *flash = mtd->priv;
+       int err;
+
+       err = spi_flash_write(flash, to, len, buf);
+       if (!err)
+               *retlen = len;
+
+       return err;
+}
+
+static void spi_flash_mtd_sync(struct mtd_info *mtd)
+{
+}
+
+static int spi_flash_mtd_number(void)
+{
+#ifdef CONFIG_SYS_MAX_FLASH_BANKS
+       return CONFIG_SYS_MAX_FLASH_BANKS;
+#else
+       return 0;
+#endif
+}
+
+int spi_flash_mtd_register(struct spi_flash *flash)
+{
+       memset(&sf_mtd_info, 0, sizeof(sf_mtd_info));
+       sprintf(sf_mtd_name, "nor%d", spi_flash_mtd_number());
+
+       sf_mtd_info.name = sf_mtd_name;
+       sf_mtd_info.type = MTD_NORFLASH;
+       sf_mtd_info.flags = MTD_CAP_NORFLASH;
+       sf_mtd_info.writesize = 1;
+       sf_mtd_info.writebufsize = flash->page_size;
+
+       sf_mtd_info._erase = spi_flash_mtd_erase;
+       sf_mtd_info._read = spi_flash_mtd_read;
+       sf_mtd_info._write = spi_flash_mtd_write;
+       sf_mtd_info._sync = spi_flash_mtd_sync;
+
+       sf_mtd_info.size = flash->size;
+       sf_mtd_info.priv = flash;
+
+       /* Only uniform flash devices for now */
+       sf_mtd_info.numeraseregions = 0;
+       sf_mtd_info.erasesize = flash->sector_size;
+
+       return add_mtd_device(&sf_mtd_info);
+}
+
+void spi_flash_mtd_unregister(void)
+{
+       del_mtd_device(&sf_mtd_info);
+}
index 201471c392c60897afc403d098898851e5bf5e38..e0283dc82cd87a07dbd0707fa21c593eaad4c71c 100644 (file)
@@ -372,11 +372,9 @@ int spi_flash_probe_slave(struct spi_slave *spi, struct spi_flash *flash)
                puts(" Full access #define CONFIG_SPI_FLASH_BAR\n");
        }
 #endif
-
-       /* Release spi bus */
-       spi_release_bus(spi);
-
-       return 0;
+#ifdef CONFIG_SPI_FLASH_MTD
+       ret = spi_flash_mtd_register(flash);
+#endif
 
 err_read_id:
        spi_release_bus(spi);
@@ -430,6 +428,9 @@ struct spi_flash *spi_flash_probe_fdt(const void *blob, int slave_node,
 
 void spi_flash_free(struct spi_flash *flash)
 {
+#ifdef CONFIG_SPI_FLASH_MTD
+       spi_flash_mtd_unregister();
+#endif
        spi_free_slave(flash->spi);
        free(flash);
 }