ARM: AM43xx: Add config file

Add config file

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>

diff --git a/boards.cfg b/boards.cfg
index 211ed589c642a4cd06000ceb4721eb762a226afc..8d86a1baed4b2943d6632e13330ffbba43c5eb99 100644 (file)
--- a/boards.cfg
+++ b/boards.cfg
@@ -252,6 +252,7 @@ am335x_evm_uart4             arm         armv7       am335x              ti
 am335x_evm_uart5             arm         armv7       am335x              ti             am33xx      am335x_evm:SERIAL6,CONS_INDEX=1,NAND
 am335x_evm_usbspl            arm         armv7       am335x              ti             am33xx      am335x_evm:SERIAL1,CONS_INDEX=1,NAND,SPL_USBETH_SUPPORT
 am335x_boneblack             arm         armv7       am335x              ti             am33xx      am335x_evm:SERIAL1,CONS_INDEX=1,EMMC_BOOT
+am43xx_evm                   arm         armv7       am43xx              ti             am33xx      am43xx_evm:SERIAL1,CONS_INDEX=1
 ti814x_evm                   arm         armv7       ti814x              ti             am33xx
 pcm051                       arm         armv7       pcm051              phytec         am33xx      pcm051
 sama5d3xek_mmc               arm         armv7       sama5d3xek          atmel          at91        sama5d3xek:SAMA5D3,SYS_USE_MMC

diff --git a/include/configs/am43xx_evm.h b/include/configs/am43xx_evm.h
new file mode 100644 (file)
index 0000000..5c802a1
--- /dev/null
+++ b/include/configs/am43xx_evm.h
@@ -0,0 +1,135 @@
+/*
+ * am43xx_evm.h
+ *
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ */
+
+#ifndef __CONFIG_AM43XX_EVM_H
+#define __CONFIG_AM43XX_EVM_H
+
+#define CONFIG_AM43XX
+#define CONFIG_OMAP
+#define CONFIG_OMAP_COMMON
+
+#include <asm/arch/omap.h>
+
+#define CONFIG_DMA_COHERENT
+#define CONFIG_DMA_COHERENT_SIZE       (1 << 20)
+
+#define CONFIG_ENV_SIZE                        (128 << 10)     /* 128 KiB */
+#define CONFIG_SYS_MALLOC_LEN          (1024 << 10)
+#define CONFIG_SYS_LONGHELP            /* undef to save memory */
+#define CONFIG_SYS_HUSH_PARSER         /* use "hush" command parser */
+#define CONFIG_SYS_PROMPT              "U-Boot# "
+#define CONFIG_SYS_NO_FLASH
+
+#define CONFIG_OF_LIBFDT
+#define CONFIG_CMD_BOOTZ
+#define CONFIG_CMDLINE_TAG             /* enable passing of ATAGs */
+#define CONFIG_CMDLINE_EDITING
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_INITRD_TAG
+
+/* commands to include */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_VERSION_VARIABLE
+
+/* set to negative value for no autoboot */
+#define CONFIG_BOOTDELAY               1
+#define CONFIG_ENV_VARS_UBOOT_CONFIG
+#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
+
+/* Clock Defines */
+#define V_OSCK                         24000000  /* Clock output from T2 */
+#define V_SCLK                         (V_OSCK)
+
+#define CONFIG_CMD_ECHO
+
+/* max number of command args */
+#define CONFIG_SYS_MAXARGS             64
+
+/* Console I/O Buffer Size */
+#define CONFIG_SYS_CBSIZE              512
+
+/* Print Buffer Size */
+#define CONFIG_SYS_PBSIZE              (CONFIG_SYS_CBSIZE \
+                                       + sizeof(CONFIG_SYS_PROMPT) + 16)
+
+/* Boot Argument Buffer Size */
+#define CONFIG_SYS_BARGSIZE            CONFIG_SYS_CBSIZE
+
+ /* Physical Memory Map */
+#define CONFIG_NR_DRAM_BANKS           1               /*  1 bank of DRAM */
+#define PHYS_DRAM_1                    0x80000000      /* DRAM Bank #1 */
+#define CONFIG_MAX_RAM_BANK_SIZE       (1024 << 20)    /* 1GB */
+
+#define CONFIG_SYS_SDRAM_BASE          PHYS_DRAM_1
+#define CONFIG_SYS_INIT_SP_ADDR         (NON_SECURE_SRAM_END - \
+                                               GENERATED_GBL_DATA_SIZE)
+/* Platform/Board specific defs */
+#define CONFIG_SYS_LOAD_ADDR           0x81000000 /* Default load address */
+
+#define CONFIG_SYS_TIMERBASE           0x48040000      /* Use Timer2 */
+#define CONFIG_SYS_PTV                 2       /* Divisor: 2^(PTV+1) => 8 */
+#define CONFIG_SYS_HZ                  1000
+
+/* NS16550 Configuration */
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE    (-4)
+#define CONFIG_SYS_NS16550_CLK         (48000000)
+#define CONFIG_SYS_NS16550_COM1                0x44e09000      /* Base EVM has UART0 */
+
+#define CONFIG_BAUDRATE                115200
+#define CONFIG_SYS_BAUDRATE_TABLE      { 110, 300, 600, 1200, 2400, \
+4800, 9600, 14400, 19200, 28800, 38400, 56000, 57600, 115200 }
+
+/* CPU */
+#define CONFIG_ARCH_CPU_INIT
+
+#define CONFIG_ENV_OVERWRITE           1
+#define CONFIG_SYS_CONSOLE_INFO_QUIET
+
+#define CONFIG_ENV_IS_NOWHERE
+
+/*
+ * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM
+ * 64 bytes before this address should be set aside for u-boot.img's
+ * header. That is 0x800FFFC0--0x80100000 should not be used for any
+ * other needs.
+ */
+#define CONFIG_SYS_TEXT_BASE           0x80800000
+
+#ifndef        CONFIG_SPL_BUILD
+#define CONFIG_SKIP_LOWLEVEL_INIT
+#endif
+
+/* Defines for SPL */
+#define CONFIG_SPL
+#define CONFIG_SPL_FRAMEWORK
+#define CONFIG_SPL_TEXT_BASE           0x402F0400
+#define CONFIG_SPL_MAX_SIZE            (101 * 1024)
+#define CONFIG_SPL_STACK               CONFIG_SYS_INIT_SP_ADDR
+
+#define CONFIG_SPL_BSS_START_ADDR      0x80a00000
+#define CONFIG_SPL_BSS_MAX_SIZE                0x80000         /* 512 KB */
+
+#define CONFIG_SPL_LIBCOMMON_SUPPORT
+#define CONFIG_SPL_LIBDISK_SUPPORT
+#define CONFIG_SPL_LIBGENERIC_SUPPORT
+#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_YMODEM_SUPPORT
+#define CONFIG_SPL_LDSCRIPT            "$(CPUDIR)/omap-common/u-boot-spl.lds"
+
+#define CONFIG_SPL_BOARD_INIT
+#define CONFIG_SYS_SPL_MALLOC_START    0x80a08000
+#define CONFIG_SYS_SPL_MALLOC_SIZE     0x100000
+
+/* Unsupported features */
+#undef CONFIG_USE_IRQ
+
+#endif /* __CONFIG_AM43XX_EVM_H */