]> git.kernelconcepts.de Git - karo-tx-uboot.git/commitdiff
tsec: Wait for auto-negotiation to complete without link
authorPeter Tyser <ptyser@xes-inc.com>
Wed, 4 Feb 2009 21:14:05 +0000 (15:14 -0600)
committerBen Warren <biggerbadderben@gmail.com>
Fri, 21 Aug 2009 17:35:30 +0000 (10:35 -0700)
Previously, waiting for auto-negotiation would only occur if a valid
link had been detected.  Problems arose when attempting to use a
tsec immediately after bootup but before link was achieved, eg:
=> dhcp
Auto-neg error, defaulting to 10BT/HD
eTSEC1: No link.
Auto-neg error, defaulting to 10BT/HD
eTSEC2: No link.
=>

With this patch applied the same operation as above resulted in:
=> dhcp
Waiting for PHY auto negotiation to complete. done
Enet starting in 1000BT/FD
Speed: 1000, full duplex

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
drivers/net/tsec.c

index a9ba68399a1545a583543d6a48515a99f051a1e4..9c9fd377c94798624b46d7b74c5c47db95848835 100644 (file)
@@ -356,8 +356,8 @@ uint mii_cr_init(uint mii_reg, struct tsec_private * priv)
                return MIIM_CR_INIT;
 }
 
-/* Parse the status register for link, and then do
- * auto-negotiation
+/*
+ * Wait for auto-negotiation to complete, then determine link
  */
 uint mii_parse_sr(uint mii_reg, struct tsec_private * priv)
 {
@@ -366,8 +366,7 @@ uint mii_parse_sr(uint mii_reg, struct tsec_private * priv)
         * (ie - we're capable and it's not done)
         */
        mii_reg = read_phy_reg(priv, MIIM_STATUS);
-       if ((mii_reg & MIIM_STATUS_LINK) && (mii_reg & PHY_BMSR_AUTN_ABLE)
-           && !(mii_reg & PHY_BMSR_AUTN_COMP)) {
+       if ((mii_reg & PHY_BMSR_AUTN_ABLE) && !(mii_reg & PHY_BMSR_AUTN_COMP)) {
                int i = 0;
 
                puts("Waiting for PHY auto negotiation to complete");
@@ -388,15 +387,15 @@ uint mii_parse_sr(uint mii_reg, struct tsec_private * priv)
                        mii_reg = read_phy_reg(priv, MIIM_STATUS);
                }
                puts(" done\n");
-               priv->link = 1;
+
+               /* Link status bit is latched low, read it again */
+               mii_reg = read_phy_reg(priv, MIIM_STATUS);
+
                udelay(500000); /* another 500 ms (results in faster booting) */
-       } else {
-               if (mii_reg & MIIM_STATUS_LINK)
-                       priv->link = 1;
-               else
-                       priv->link = 0;
        }
 
+       priv->link = mii_reg & MIIM_STATUS_LINK ? 1 : 0;
+
        return 0;
 }