]> git.kernelconcepts.de Git - karo-tx-uboot.git/commitdiff
imx: mx6dlarm2: Add support for i.MX6DL arm2 DDR3 board
authorYe.Li <B37916@freescale.com>
Mon, 29 Sep 2014 15:26:28 +0000 (23:26 +0800)
committerStefano Babic <sbabic@denx.de>
Tue, 30 Sep 2014 10:21:14 +0000 (12:21 +0200)
This patch adds the i.MX6DL arm2 board support. The i.MX6DL ARM2
shared the same board with i.MX6Q ARM2 board since the i.MX6DL is
pin-pin compatible with i.MX6Q.

The patch also support the DDR 32-BIT mode option. Please define
CONFIG_DDR_32BIT in the board configure file to enable DDR 32-BIT
mode.But due to the board design, it's 64bit DDR buswidth physically,
so, if you CONFIG_DDR_32BIT, the DDR memory size will be half of it.

Signed-off-by: Ye.Li <B37916@freescale.com>
board/freescale/mx6qarm2/MAINTAINERS
board/freescale/mx6qarm2/imximage_mx6dl.cfg [new file with mode: 0644]
board/freescale/mx6qarm2/mx6qarm2.c
configs/mx6dlarm2_defconfig [new file with mode: 0644]
configs/mx6qarm2_defconfig
include/configs/mx6qarm2.h

index 42c19d13ec1a24259feed45f6b7245f118c32178..c8d594b17ffe4a82c5fdbd8c4e9f0066428ed7e0 100644 (file)
@@ -1,6 +1,8 @@
 MX6QARM2 BOARD
 M:     Jason Liu <r64343@freescale.com>
+M:     Ye Li <b37916@freescale.com>
 S:     Maintained
 F:     board/freescale/mx6qarm2/
 F:     include/configs/mx6qarm2.h
 F:     configs/mx6qarm2_defconfig
+F:     configs/mx6dlarm2_defconfig
diff --git a/board/freescale/mx6qarm2/imximage_mx6dl.cfg b/board/freescale/mx6qarm2/imximage_mx6dl.cfg
new file mode 100644 (file)
index 0000000..eef723c
--- /dev/null
@@ -0,0 +1,143 @@
+/*
+ * Copyright (C) 2014 Freescale Semiconductor, Inc.
+ * Jason Liu <r64343@freescale.com>
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ *
+ * Refer doc/README.imximage for more details about how-to configure
+ * and create imximage boot image
+ *
+ * The syntax is taken as close as possible with the kwbimage
+ */
+
+/* image version */
+IMAGE_VERSION 2
+
+/*
+ * Boot Device : one of
+ * spi, sd (the board has no nand neither onenand)
+ */
+BOOT_FROM      sd
+
+/*
+ * Device Configuration Data (DCD)
+ *
+ * Each entry must have the format:
+ * Addr-type           Address        Value
+ *
+ * where:
+ *     Addr-type register length (1,2 or 4 bytes)
+ *     Address   absolute address of the register
+ *     value     value to be stored in the register
+ */
+DATA 4 0x020e0798 0x000c0000
+DATA 4 0x020e0758 0x00000000
+DATA 4 0x020e0588 0x00000030
+DATA 4 0x020e0594 0x00000030
+DATA 4 0x020e056c 0x00000030
+DATA 4 0x020e0578 0x00000030
+DATA 4 0x020e074c 0x00000030
+DATA 4 0x020e057c 0x00000030
+DATA 4 0x020e0590 0x00003000
+DATA 4 0x020e0598 0x00003000
+DATA 4 0x020e058c 0x00000000
+DATA 4 0x020e059c 0x00003030
+DATA 4 0x020e05a0 0x00003030
+DATA 4 0x020e078c 0x00000030
+DATA 4 0x020e0750 0x00020000
+DATA 4 0x020e05a8 0x00000030
+DATA 4 0x020e05b0 0x00000030
+DATA 4 0x020e0524 0x00000030
+DATA 4 0x020e051c 0x00000030
+DATA 4 0x020e0518 0x00000030
+DATA 4 0x020e050c 0x00000030
+DATA 4 0x020e05b8 0x00000030
+DATA 4 0x020e05c0 0x00000030
+DATA 4 0x020e0774 0x00020000
+DATA 4 0x020e0784 0x00000030
+DATA 4 0x020e0788 0x00000030
+DATA 4 0x020e0794 0x00000030
+DATA 4 0x020e079c 0x00000030
+DATA 4 0x020e07a0 0x00000030
+DATA 4 0x020e07a4 0x00000030
+DATA 4 0x020e07a8 0x00000030
+DATA 4 0x020e0748 0x00000030
+DATA 4 0x020e05ac 0x00000030
+DATA 4 0x020e05b4 0x00000030
+DATA 4 0x020e0528 0x00000030
+DATA 4 0x020e0520 0x00000030
+DATA 4 0x020e0514 0x00000030
+DATA 4 0x020e0510 0x00000030
+DATA 4 0x020e05bc 0x00000030
+DATA 4 0x020e05c4 0x00000030
+
+DATA 4 0x021b0800 0xa1390003
+DATA 4 0x021b4800 0xa1390003
+DATA 4 0x021b080c 0x001F001F
+DATA 4 0x021b0810 0x001F001F
+DATA 4 0x021b480c 0x00370037
+DATA 4 0x021b4810 0x00370037
+DATA 4 0x021b083c 0x422f0220
+DATA 4 0x021b0840 0x021f0219
+DATA 4 0x021b483C 0x422f0220
+DATA 4 0x021b4840 0x022d022f
+DATA 4 0x021b0848 0x47494b49
+DATA 4 0x021b4848 0x48484c47
+DATA 4 0x021b0850 0x39382b2f
+DATA 4 0x021b4850 0x2f35312c
+DATA 4 0x021b081c 0x33333333
+DATA 4 0x021b0820 0x33333333
+DATA 4 0x021b0824 0x33333333
+DATA 4 0x021b0828 0x33333333
+DATA 4 0x021b481c 0x33333333
+DATA 4 0x021b4820 0x33333333
+DATA 4 0x021b4824 0x33333333
+DATA 4 0x021b4828 0x33333333
+DATA 4 0x021b08b8 0x00000800
+DATA 4 0x021b48b8 0x00000800
+DATA 4 0x021b0004 0x0002002d
+DATA 4 0x021b0008 0x00333030
+
+DATA 4 0x021b000c 0x40445323
+DATA 4 0x021b0010 0xb66e8c63
+
+DATA 4 0x021b0014 0x01ff00db
+DATA 4 0x021b0018 0x00081740
+DATA 4 0x021b001c 0x00008000
+DATA 4 0x021b002c 0x000026d2
+DATA 4 0x021b0030 0x00440e21
+#ifdef CONFIG_DDR_32BIT
+DATA 4 0x021b0040 0x00000017
+DATA 4 0x021b0000 0xc3190000
+#else
+DATA 4 0x021b0040 0x00000027
+DATA 4 0x021b0000 0xc31a0000
+#endif
+DATA 4 0x021b001c 0x04008032
+DATA 4 0x021b001c 0x0400803a
+DATA 4 0x021b001c 0x00008033
+DATA 4 0x021b001c 0x0000803b
+DATA 4 0x021b001c 0x00428031
+DATA 4 0x021b001c 0x00428039
+DATA 4 0x021b001c 0x07208030
+DATA 4 0x021b001c 0x07208038
+DATA 4 0x021b001c 0x04008040
+DATA 4 0x021b001c 0x04008048
+DATA 4 0x021b0020 0x00005800
+DATA 4 0x021b0818 0x00000007
+DATA 4 0x021b4818 0x00000007
+DATA 4 0x021b0004 0x0002556d
+DATA 4 0x021b4004 0x00011006
+DATA 4 0x021b001c 0x00000000
+
+DATA 4 0x020c4068 0x00C03F3F
+DATA 4 0x020c406c 0x0030FC03
+DATA 4 0x020c4070 0x0FFFC000
+DATA 4 0x020c4074 0x3FF00000
+DATA 4 0x020c4078 0x00FFF300
+DATA 4 0x020c407c 0x0F0000C3
+DATA 4 0x020c4080 0x000003FF
+
+DATA 4 0x020e0010 0xF00000CF
+DATA 4 0x020e0018 0x007F007F
+DATA 4 0x020e001c 0x007F007F
index 6c51f3a1825937d98ea6c2b40f54a095eaafb70f..f2e577d514426b3b1d115b92a16557a0f7acd411 100644 (file)
@@ -224,7 +224,11 @@ int board_init(void)
 
 int checkboard(void)
 {
+#ifdef CONFIG_MX6DL
+       puts("Board: MX6DL-Armadillo2\n");
+#else
        puts("Board: MX6Q-Armadillo2\n");
+#endif
 
        return 0;
 }
diff --git a/configs/mx6dlarm2_defconfig b/configs/mx6dlarm2_defconfig
new file mode 100644 (file)
index 0000000..b4b78e5
--- /dev/null
@@ -0,0 +1,3 @@
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6qarm2/imximage_mx6dl.cfg,MX6DL"
+CONFIG_ARM=y
+CONFIG_TARGET_MX6QARM2=y
index bdcc672b57a46f3117636033a08ecec900d6844e..a251615a381d02dbd02913d9bd54a7d32af94104 100644 (file)
@@ -1,3 +1,3 @@
-CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6qarm2/imximage.cfg"
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6qarm2/imximage.cfg,MX6Q"
 CONFIG_ARM=y
 CONFIG_TARGET_MX6QARM2=y
index aa01647c97e3bd574c8f2914d706ce48f9cda1b4..ed57e4aa87a9fa6207fb8e6f9be07b3a0a98f1c5 100644 (file)
@@ -10,7 +10,6 @@
 #define __CONFIG_H
 
 #define CONFIG_MX6
-#define CONFIG_MX6Q
 
 #include "mx6_common.h"
 
 /* Physical Memory Map */
 #define CONFIG_NR_DRAM_BANKS           1
 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
+#ifdef CONFIG_DDR_32BIT
+#define PHYS_SDRAM_SIZE                        (1u * 1024 * 1024 * 1024)
+#else
 #define PHYS_SDRAM_SIZE                        (2u * 1024 * 1024 * 1024)
+#endif
 
 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR