]> git.kernelconcepts.de Git - karo-tx-uboot.git/commitdiff
Add (some) definitions for the MPC85xx local bus controller
authorWolfgang Denk <wd@pollux.denx.de>
Sun, 12 Mar 2006 21:45:47 +0000 (22:45 +0100)
committerWolfgang Denk <wd@pollux.denx.de>
Sun, 12 Mar 2006 21:45:47 +0000 (22:45 +0100)
Patch by Murray Jensen, 08 Jul 2005

CHANGELOG
include/mpc85xx.h

index 48d30f69d696be9849494ae9a92a62c289e8fcfa..27ce62c891d764695bb8eb79291693a41f88a572 100644 (file)
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -2,6 +2,9 @@
 Changes since U-Boot 1.1.4:
 ======================================================================
 
+* Add (some) definitions for the MPC85xx local bus controller
+  Patch by Murray Jensen, 08 Jul 2005
+
 * Add CPM2 I/O pin functions for MPC85xx processors
   Patch by Murray Jensen, 08 Jul 2005
 
index 60b6c61fb0bbd81409d377199a13c1c578892db3..a4d99b2a165074d1f654fa32c9dff63a891ddd3b 100644 (file)
 #define SCCR_DFBRG10    0x00000002      /* BRGCLK division by 64 */
 #define SCCR_DFBRG11    0x00000003      /* BRGCLK division by 256 */
 
+/*
+ * Local Bus Controller - memory controller registers
+ */
+#define BRx_V          0x00000001      /* Bank Valid                   */
+#define BRx_MS_GPCM    0x00000000      /* G.P.C.M. Machine Select      */
+#define BRx_MS_SDRAM   0x00000000      /* SDRAM Machine Select         */
+#define BRx_MS_UPMA    0x00000080      /* U.P.M.A Machine Select       */
+#define BRx_MS_UPMB    0x000000a0      /* U.P.M.B Machine Select       */
+#define BRx_MS_UPMC    0x000000c0      /* U.P.M.C Machine Select       */
+#define BRx_PS_8       0x00000800      /*  8 bit port size             */
+#define BRx_PS_32      0x00001800      /* 32 bit port size             */
+#define BRx_BA_MSK     0xffff8000      /* Base Address Mask            */
+
+#define ORxG_EAD       0x00000001      /* External addr latch delay    */
+#define ORxG_EHTR      0x00000002      /* Extended hold time on read   */
+#define ORxG_TRLX      0x00000004      /* Timing relaxed               */
+#define ORxG_SETA      0x00000008      /* External address termination */
+#define ORxG_SCY_10_CLK        0x000000a0      /* 10 clock cycles wait states  */
+#define ORxG_SCY_15_CLK        0x000000f0      /* 15 clock cycles wait states  */
+#define ORxG_XACS      0x00000100      /* Extra addr to CS setup       */
+#define ORxG_ACS_DIV2  0x00000600      /* CS is output 1/2 a clock later*/
+#define ORxG_CSNT      0x00000800      /* Chip Select Negation Time    */
+
+#define ORxU_BI                0x00000100      /* Burst Inhibit                */
+#define ORxU_AM_MSK    0xffff8000      /* Address Mask Mask            */
+
+#define MxMR_OP_NORM   0x00000000      /* Normal Operation             */
+#define MxMR_DSx_2_CYCL 0x00400000     /* 2 cycle Disable Period       */
+#define MxMR_OP_WARR   0x10000000      /* Write to Array               */
+#define MxMR_BSEL      0x80000000      /* Bus Select                   */
+
+/* helpers to convert values into an OR address mask (GPCM mode) */
+#define P2SZ_TO_AM(s)  ((~((s) - 1)) & 0xffff8000)     /* must be pow of 2 */
+#define MEG_TO_AM(m)   P2SZ_TO_AM((m) << 20)
+
 #endif /* __MPC85xx_H__ */