imx31_phycore_eet \
mx31ads \
mx31pdk \
+ mx31pdk_nand \
qong \
smdk6400 \
"
mx31ads_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm1136 mx31ads freescale mx31
-mx31pdk_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm1136 mx31pdk freescale mx31
+mx31pdk_config \
+mx31pdk_nand_config : unconfig
+ @mkdir -p $(obj)include
+ @if [ -n "$(findstring _nand_,$@)" ]; then \
+ echo "#define CONFIG_NAND_U_BOOT" >> $(obj)include/config.h; \
+ else \
+ echo "#define CONFIG_SKIP_LOWLEVEL_INIT" >> $(obj)include/config.h; \
+ echo "#define CONFIG_SKIP_RELOCATE_UBOOT" >> $(obj)include/config.h; \
+ fi
+ @$(MKCONFIG) -a mx31pdk arm arm1136 mx31pdk freescale mx31
omap2420h4_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm1136 omap2420h4 NULL omap24xx
+ifdef CONFIG_NAND_SPL
+TEXT_BASE = 0x87ec0000
+else
TEXT_BASE = 0x87f00000
+endif
--- /dev/null
+/*
+ * (C) Copyright 2009 Magnus Lilja <lilja.magnus@gmail.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <asm/arch/mx31-regs.h>
+#include <asm/macro.h>
+
+.globl lowlevel_init
+lowlevel_init:
+ /* Also setup the Peripheral Port Remap register inside the core */
+ ldr r0, =ARM_PPMRR /* start from AIPS 2GB region */
+ mcr p15, 0, r0, c15, c2, 4
+
+ write32 IPU_CONF, IPU_CONF_DI_EN
+ write32 CCM_CCMR, CCM_CCMR_SETUP
+
+ wait_timer 0x40000
+
+ write32 CCM_CCMR, CCM_CCMR_SETUP | CCMR_MPE
+ write32 CCM_CCMR, (CCM_CCMR_SETUP | CCMR_MPE) & ~CCMR_MDS
+
+ /* Set up clock to 532MHz */
+ write32 CCM_PDR0, CCM_PDR0_SETUP_532MHZ
+ write32 CCM_MPCTL, CCM_MPCTL_SETUP_532MHZ
+
+ write32 CCM_SPCTL, PLL_PD(1) | PLL_MFD(4) | PLL_MFI(12) | PLL_MFN(1)
+
+ /* Set up MX31 DDR pins */
+ write32 IOMUXC_SW_PAD_CTL_SDCKE1_SDCLK_SDCLK_B, 0
+ write32 IOMUXC_SW_PAD_CTL_CAS_SDWE_SDCKE0, 0
+ write32 IOMUXC_SW_PAD_CTL_BCLK_RW_RAS, 0
+ write32 IOMUXC_SW_PAD_CTL_CS2_CS3_CS4, 0x1000
+ write32 IOMUXC_SW_PAD_CTL_DQM3_EB0_EB1, 0
+ write32 IOMUXC_SW_PAD_CTL_DQM0_DQM1_DQM2, 0
+ write32 IOMUXC_SW_PAD_CTL_SD29_SD30_SD31, 0
+ write32 IOMUXC_SW_PAD_CTL_SD26_SD27_SD28, 0
+ write32 IOMUXC_SW_PAD_CTL_SD23_SD24_SD25, 0
+ write32 IOMUXC_SW_PAD_CTL_SD20_SD21_SD22, 0
+ write32 IOMUXC_SW_PAD_CTL_SD17_SD18_SD19, 0
+ write32 IOMUXC_SW_PAD_CTL_SD14_SD15_SD16, 0
+ write32 IOMUXC_SW_PAD_CTL_SD11_SD12_SD13, 0
+ write32 IOMUXC_SW_PAD_CTL_SD8_SD9_SD10, 0
+ write32 IOMUXC_SW_PAD_CTL_SD5_SD6_SD7, 0
+ write32 IOMUXC_SW_PAD_CTL_SD2_SD3_SD4, 0
+ write32 IOMUXC_SW_PAD_CTL_SDBA0_SD0_SD1, 0
+ write32 IOMUXC_SW_PAD_CTL_A24_A25_SDBA1, 0
+ write32 IOMUXC_SW_PAD_CTL_A21_A22_A23, 0
+ write32 IOMUXC_SW_PAD_CTL_A18_A19_A20, 0
+ write32 IOMUXC_SW_PAD_CTL_A15_A16_A17, 0
+ write32 IOMUXC_SW_PAD_CTL_A12_A13_A14, 0
+ write32 IOMUXC_SW_PAD_CTL_A10_MA10_A11, 0
+ write32 IOMUXC_SW_PAD_CTL_A7_A8_A9, 0
+ write32 IOMUXC_SW_PAD_CTL_A4_A5_A6, 0
+ write32 IOMUXC_SW_PAD_CTL_A1_A2_A3, 0
+ write32 IOMUXC_SW_PAD_CTL_VPG0_VPG1_A0, 0
+
+ /* Set up MX31 DDR Memory Controller */
+ write32 WEIM_ESDMISC, ESDMISC_MDDR_SETUP
+ write32 WEIM_ESDCFG0, ESDCFG0_MDDR_SETUP
+
+ /* Perform DDR init sequence */
+ write32 WEIM_ESDCTL0, ESDCTL_PRECHARGE
+ write32 CSD0_BASE | 0x0f00, 0x12344321
+ write32 WEIM_ESDCTL0, ESDCTL_AUTOREFRESH
+ write32 CSD0_BASE, 0x12344321
+ write32 CSD0_BASE, 0x12344321
+ write32 WEIM_ESDCTL0, ESDCTL_LOADMODEREG
+ write8 CSD0_BASE | 0x00000033, 0xda
+ write8 CSD0_BASE | 0x01000000, 0xff
+ write32 WEIM_ESDCTL0, ESDCTL_RW
+ write32 CSD0_BASE, 0xDEADBEEF
+ write32 WEIM_ESDMISC, ESDMISC_MDDR_RESET_DL
+
+ mov pc, lr
#define PLL_MFI(x) (((x) & 0xf) << 10)
#define PLL_MFN(x) (((x) & 0x3ff) << 0)
+#define WEIM_ESDCTL0 0xB8001000
+#define WEIM_ESDCFG0 0xB8001004
+#define WEIM_ESDCTL1 0xB8001008
+#define WEIM_ESDCFG1 0xB800100C
+#define WEIM_ESDMISC 0xB8001010
+
+#define ESDCTL_SDE (1 << 31)
+#define ESDCTL_CMD_RW (0 << 28)
+#define ESDCTL_CMD_PRECHARGE (1 << 28)
+#define ESDCTL_CMD_AUTOREFRESH (2 << 28)
+#define ESDCTL_CMD_LOADMODEREG (3 << 28)
+#define ESDCTL_CMD_MANUALREFRESH (4 << 28)
+#define ESDCTL_ROW_13 (2 << 24)
+#define ESDCTL_ROW(x) ((x) << 24)
+#define ESDCTL_COL_9 (1 << 20)
+#define ESDCTL_COL(x) ((x) << 20)
+#define ESDCTL_DSIZ(x) ((x) << 16)
+#define ESDCTL_SREFR(x) ((x) << 13)
+#define ESDCTL_PWDT(x) ((x) << 10)
+#define ESDCTL_FP(x) ((x) << 8)
+#define ESDCTL_BL(x) ((x) << 7)
+#define ESDCTL_PRCT(x) ((x) << 0)
+
#define WEIM_BASE 0xb8002000
#define CSCR_U(x) (WEIM_BASE + (x) * 0x10)
#define CSCR_L(x) (WEIM_BASE + 4 + (x) * 0x10)
#define MUX_CSPI2_MOSI__I2C2_SCL IOMUX_MODE(MUX_CTL_CSPI2_MOSI, MUX_CTL_ALT1)
#define MUX_CSPI2_MISO__I2C2_SDA IOMUX_MODE(MUX_CTL_CSPI2_MISO, MUX_CTL_ALT1)
+/* PAD control registers for SDR/DDR */
+#define IOMUXC_SW_PAD_CTL_SDCKE1_SDCLK_SDCLK_B (IOMUXC_BASE + 0x26C)
+#define IOMUXC_SW_PAD_CTL_CAS_SDWE_SDCKE0 (IOMUXC_BASE + 0x270)
+#define IOMUXC_SW_PAD_CTL_BCLK_RW_RAS (IOMUXC_BASE + 0x274)
+#define IOMUXC_SW_PAD_CTL_CS5_ECB_LBA (IOMUXC_BASE + 0x278)
+#define IOMUXC_SW_PAD_CTL_CS2_CS3_CS4 (IOMUXC_BASE + 0x27C)
+#define IOMUXC_SW_PAD_CTL_OE_CS0_CS1 (IOMUXC_BASE + 0x280)
+#define IOMUXC_SW_PAD_CTL_DQM3_EB0_EB1 (IOMUXC_BASE + 0x284)
+#define IOMUXC_SW_PAD_CTL_DQM0_DQM1_DQM2 (IOMUXC_BASE + 0x288)
+#define IOMUXC_SW_PAD_CTL_SD29_SD30_SD31 (IOMUXC_BASE + 0x28C)
+#define IOMUXC_SW_PAD_CTL_SD26_SD27_SD28 (IOMUXC_BASE + 0x290)
+#define IOMUXC_SW_PAD_CTL_SD23_SD24_SD25 (IOMUXC_BASE + 0x294)
+#define IOMUXC_SW_PAD_CTL_SD20_SD21_SD22 (IOMUXC_BASE + 0x298)
+#define IOMUXC_SW_PAD_CTL_SD17_SD18_SD19 (IOMUXC_BASE + 0x29C)
+#define IOMUXC_SW_PAD_CTL_SD14_SD15_SD16 (IOMUXC_BASE + 0x2A0)
+#define IOMUXC_SW_PAD_CTL_SD11_SD12_SD13 (IOMUXC_BASE + 0x2A4)
+#define IOMUXC_SW_PAD_CTL_SD8_SD9_SD10 (IOMUXC_BASE + 0x2A8)
+#define IOMUXC_SW_PAD_CTL_SD5_SD6_SD7 (IOMUXC_BASE + 0x2AC)
+#define IOMUXC_SW_PAD_CTL_SD2_SD3_SD4 (IOMUXC_BASE + 0x2B0)
+#define IOMUXC_SW_PAD_CTL_SDBA0_SD0_SD1 (IOMUXC_BASE + 0x2B4)
+#define IOMUXC_SW_PAD_CTL_A24_A25_SDBA1 (IOMUXC_BASE + 0x2B8)
+#define IOMUXC_SW_PAD_CTL_A21_A22_A23 (IOMUXC_BASE + 0x2BC)
+#define IOMUXC_SW_PAD_CTL_A18_A19_A20 (IOMUXC_BASE + 0x2C0)
+#define IOMUXC_SW_PAD_CTL_A15_A16_A17 (IOMUXC_BASE + 0x2C4)
+#define IOMUXC_SW_PAD_CTL_A12_A13_A14 (IOMUXC_BASE + 0x2C8)
+#define IOMUXC_SW_PAD_CTL_A10_MA10_A11 (IOMUXC_BASE + 0x2CC)
+#define IOMUXC_SW_PAD_CTL_A7_A8_A9 (IOMUXC_BASE + 0x2D0)
+#define IOMUXC_SW_PAD_CTL_A4_A5_A6 (IOMUXC_BASE + 0x2D4)
+#define IOMUXC_SW_PAD_CTL_A1_A2_A3 (IOMUXC_BASE + 0x2D8)
+#define IOMUXC_SW_PAD_CTL_VPG0_VPG1_A0 (IOMUXC_BASE + 0x2DC)
+
/*
* Memory regions and CS
*/
#define CONFIG_SETUP_MEMORY_TAGS 1
#define CONFIG_INITRD_TAG 1
-/* No support for NAND boot for i.MX31 PDK yet, so we rely on some other
- * program to initialize the SDRAM.
- */
+#if defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
#define CONFIG_SKIP_LOWLEVEL_INIT
+#define CONFIG_SKIP_RELOCATE_UBOOT
+#endif
/*
* Size of malloc() pool
#define CONFIG_ENV_SIZE (128 * 1024)
+/* NAND configuration for the NAND_SPL */
+
+/* Start copying real U-boot from the second page */
+#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x800
+#define CONFIG_SYS_NAND_U_BOOT_SIZE 0x30000
+/* Load U-Boot to this address */
+#define CONFIG_SYS_NAND_U_BOOT_DST 0x87f00000
+#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_NAND_U_BOOT_DST
+
+#define CONFIG_SYS_NAND_PAGE_SIZE 0x800
+#define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024)
+#define CONFIG_SYS_NAND_PAGE_COUNT 64
+#define CONFIG_SYS_NAND_SIZE (256 * 1024 * 1024)
+#define CONFIG_SYS_NAND_BAD_BLOCK_POS 0
+
+
+/* Configuration of lowlevel_init.S (clocks and SDRAM) */
+#define CCM_CCMR_SETUP 0x074B0BF5
+#define CCM_PDR0_SETUP_532MHZ (PDR0_CSI_PODF(0x1ff) | PDR0_PER_PODF(7) | \
+ PDR0_HSP_PODF(3) | PDR0_NFC_PODF(5) | \
+ PDR0_IPG_PODF(1) | PDR0_MAX_PODF(3) | \
+ PDR0_MCU_PODF(0))
+#define CCM_MPCTL_SETUP_532MHZ (PLL_PD(0) | PLL_MFD(51) | PLL_MFI(10) | \
+ PLL_MFN(12))
+
+#define ESDMISC_MDDR_SETUP 0x00000004
+#define ESDMISC_MDDR_RESET_DL 0x0000000c
+#define ESDCFG0_MDDR_SETUP 0x006ac73a
+
+#define ESDCTL_ROW_COL (ESDCTL_SDE | ESDCTL_ROW(2) | ESDCTL_COL(2))
+#define ESDCTL_SETTINGS (ESDCTL_ROW_COL | ESDCTL_SREFR(3) | \
+ ESDCTL_DSIZ(2) | ESDCTL_BL(1))
+#define ESDCTL_PRECHARGE (ESDCTL_ROW_COL | ESDCTL_CMD_PRECHARGE)
+#define ESDCTL_AUTOREFRESH (ESDCTL_ROW_COL | ESDCTL_CMD_AUTOREFRESH)
+#define ESDCTL_LOADMODEREG (ESDCTL_ROW_COL | ESDCTL_CMD_LOADMODEREG)
+#define ESDCTL_RW ESDCTL_SETTINGS
+
#endif /* __CONFIG_H */
--- /dev/null
+CONFIG_NAND_SPL = y
+
+include $(TOPDIR)/config.mk
+include $(TOPDIR)/nand_spl/board/$(BOARDDIR)/config.mk
+
+LDSCRIPT= $(TOPDIR)/nand_spl/board/$(BOARDDIR)/u-boot.lds
+LDFLAGS = -Bstatic -T $(LDSCRIPT) -Ttext $(TEXT_BASE) $(PLATFORM_LDFLAGS)
+AFLAGS += -DCONFIG_PRELOADER -DCONFIG_NAND_SPL
+CFLAGS += -DCONFIG_PRELOADER -DCONFIG_NAND_SPL
+
+SOBJS = start.o lowlevel_init.o
+COBJS = nand_boot_fsl_nfc.o
+
+SRCS := $(SRCTREE)/nand_spl/nand_boot_fsl_nfc.c
+SRCS += $(SRCTREE)/cpu/arm1136/start.S
+SRCS += $(SRCTREE)/board/freescale/mx31pdk/lowlevel_init.S
+OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
+__OBJS := $(SOBJS) $(COBJS)
+LNDIR := $(OBJTREE)/nand_spl/board/$(BOARDDIR)
+
+nandobj := $(OBJTREE)/nand_spl/
+
+ALL = $(nandobj)u-boot-spl $(nandobj)u-boot-spl.bin $(nandobj)u-boot-spl-16k.bin
+
+all: $(obj).depend $(ALL)
+
+$(nandobj)u-boot-spl-16k.bin: $(nandobj)u-boot-spl
+ $(OBJCOPY) ${OBJCFLAGS} --pad-to=$(PAD_TO) -O binary $< $@
+
+$(nandobj)u-boot-spl.bin: $(nandobj)u-boot-spl
+ $(OBJCOPY) ${OBJCFLAGS} -O binary $< $@
+
+$(nandobj)u-boot-spl: $(OBJS)
+ cd $(LNDIR) && $(LD) $(LDFLAGS) $(__OBJS) \
+ -Map $(nandobj)u-boot-spl.map \
+ -o $@
+
+#########################################################################
+
+$(obj)%.o: $(SRCTREE)/cpu/arm1136/%.S
+ $(CC) $(AFLAGS) -c -o $@ $<
+
+$(obj)%.o: $(SRCTREE)/board/freescale/mx31pdk/%.S
+ $(CC) $(AFLAGS) -c -o $@ $<
+
+$(obj)%.o: $(SRCTREE)/nand_spl/%.c
+ $(CC) $(CFLAGS) -c -o $@ $<
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
--- /dev/null
+PAD_TO := 2048
--- /dev/null
+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SECTIONS
+{
+ . = 0x00000000;
+
+ . = ALIGN(4);
+ .text :
+ {
+ start.o (.text)
+ lowlevel_init.o (.text)
+ nand_boot_fsl_nfc.o (.text)
+ *(.text)
+ . = 2K;
+ }
+
+ . = ALIGN(4);
+ .rodata : { *(.rodata) }
+
+ . = ALIGN(4);
+ .data : { *(.data) }
+
+ . = ALIGN(4);
+ .got : { *(.got) }
+
+ . = .;
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ __bss_start = .;
+ .bss : { *(.bss) }
+ _end = .;
+}
projects / karo-tx-uboot.git / commitdiff