LIBS-y += $(CPUDIR)/omap-common/libomap-common.o
endif
-ifeq ($(SOC),mx5)
-LIBS-y += $(CPUDIR)/imx-common/libimx-common.o
-endif
-ifeq ($(SOC),mx6)
-LIBS-y += $(CPUDIR)/imx-common/libimx-common.o
+ifneq (,$(filter $(SOC), mx25 mx27 mx5 mx6 mx31 mx35))
+LIBS-y += arch/$(ARCH)/imx-common/libimx-common.o
endif
ifeq ($(SOC),s5pc1xx)
$(obj)tools/gen_eth_addr $(obj)tools/img2srec \
$(obj)tools/mk{env,}image $(obj)tools/mpc86x_clk \
$(obj)tools/mk{smdk5250,}spl \
+ $(obj)tools/mxsboot \
$(obj)tools/ncb $(obj)tools/ubsha1
@rm -f $(obj)board/cray/L1/{bootscript.c,bootscript.image} \
$(obj)board/matrix_vision/*/bootscript.img \
*/
#include <common.h>
+#include <div64.h>
#include <asm/arch/imx-regs.h>
#include <asm/arch/clock.h>
#include <asm/io.h>
static u32 mx31_decode_pll(u32 reg, u32 infreq)
{
u32 mfi = GET_PLL_MFI(reg);
- u32 mfn = GET_PLL_MFN(reg);
+ s32 mfn = GET_PLL_MFN(reg);
u32 mfd = GET_PLL_MFD(reg);
u32 pd = GET_PLL_PD(reg);
mfi = mfi <= 5 ? 5 : mfi;
+ mfn = mfn >= 512 ? mfn - 1024 : mfn;
mfd += 1;
pd += 1;
- return ((2 * (infreq >> 10) * (mfi * mfd + mfn)) /
- (mfd * pd)) << 10;
+ return lldiv(2 * (u64)infreq * (mfi * mfd + mfn),
+ mfd * pd);
}
static u32 mx31_get_mpl_dpdgck_clk(void)
u32 infreq;
if ((readl(CCM_CCMR) & CCMR_PRCS_MASK) == CCMR_FPM)
- infreq = CONFIG_MX31_CLK32 * 1024;
+ infreq = MXC_CLK32 * 1024;
else
- infreq = CONFIG_MX31_HCLK_FREQ;
+ infreq = MXC_HCLK;
return mx31_decode_pll(readl(CCM_MPCTL), infreq);
}
#include <common.h>
#include <asm/arch/imx-regs.h>
+#include <asm/arch/clock.h>
#include <div64.h>
#include <watchdog.h>
#include <asm/io.h>
static inline unsigned long long tick_to_time(unsigned long long tick)
{
tick *= CONFIG_SYS_HZ;
- do_div(tick, CONFIG_MX31_CLK32);
+ do_div(tick, MXC_CLK32);
return tick;
}
static inline unsigned long long time_to_tick(unsigned long long time)
{
- time *= CONFIG_MX31_CLK32;
+ time *= MXC_CLK32;
do_div(time, CONFIG_SYS_HZ);
return time;
}
static inline unsigned long long us_to_tick(unsigned long long us)
{
- us = us * CONFIG_MX31_CLK32 + 999999;
+ us = us * MXC_CLK32 + 999999;
do_div(us, 1000000);
return us;
}
#else
/* ~2% error */
-#define TICK_PER_TIME ((CONFIG_MX31_CLK32 + CONFIG_SYS_HZ / 2) \
- / CONFIG_SYS_HZ)
-#define US_PER_TICK (1000000 / CONFIG_MX31_CLK32)
+#define TICK_PER_TIME ((MXC_CLK32 + CONFIG_SYS_HZ / 2) / CONFIG_SYS_HZ)
+#define US_PER_TICK (1000000 / MXC_CLK32)
static inline unsigned long long tick_to_time(unsigned long long tick)
{
{
/*
* get_ticks() returns a long long (64 bit), it wraps in
- * 2^64 / CONFIG_MX31_CLK32 = 2^64 / 2^15 = 2^49 ~ 5 * 10^14 (s) ~
+ * 2^64 / MXC_CLK32 = 2^64 / 2^15 = 2^49 ~ 5 * 10^14 (s) ~
* 5 * 10^9 days... and get_ticks() * CONFIG_SYS_HZ wraps in
* 5 * 10^6 days - long enough.
*/
*/
ulong get_tbclk(void)
{
- return CONFIG_MX31_CLK32;
+ return MXC_CLK32;
}
void reset_cpu(ulong addr)
*/
#include <common.h>
+#include <div64.h>
#include <asm/io.h>
#include <asm/errno.h>
#include <asm/arch/imx-regs.h>
static u32 decode_pll(u32 reg, u32 infreq)
{
u32 mfi = (reg >> 10) & 0xf;
- u32 mfn = reg & 0x3f;
- u32 mfd = (reg >> 16) & 0x3f;
+ s32 mfn = reg & 0x3ff;
+ u32 mfd = (reg >> 16) & 0x3ff;
u32 pd = (reg >> 26) & 0xf;
mfi = mfi <= 5 ? 5 : mfi;
+ mfn = mfn >= 512 ? mfn - 1024 : mfn;
mfd += 1;
pd += 1;
- return ((2 * (infreq / 1000) * (mfi * mfd + mfn)) / (mfd * pd)) * 1000;
+ return lldiv(2 * (u64)infreq * (mfi * mfd + mfn),
+ mfd * pd);
}
static u32 get_mcu_main_clk(void)
struct ccm_regs *ccm =
(struct ccm_regs *)IMX_CCM_BASE;
arm_div = get_arm_div(readl(&ccm->pdr0), &fi, &fd);
- fi *=
- decode_pll(readl(&ccm->mpctl),
- CONFIG_MX35_HCLK_FREQ);
+ fi *= decode_pll(readl(&ccm->mpctl), MXC_HCLK);
return fi / (arm_div * fd);
}
u32 pdr4 = readl(&ccm->pdr4);
u32 div;
if (pdr0 & MXC_CCM_PDR0_PER_SEL) {
- div = (CCM_GET_DIVIDER(pdr4,
- MXC_CCM_PDR4_PER0_PRDF_MASK,
- MXC_CCM_PDR4_PER0_PODF_OFFSET) + 1) *
- (CCM_GET_DIVIDER(pdr4,
+ div = CCM_GET_DIVIDER(pdr4,
MXC_CCM_PDR4_PER0_PODF_MASK,
- MXC_CCM_PDR4_PER0_PODF_OFFSET) + 1);
+ MXC_CCM_PDR4_PER0_PODF_OFFSET) + 1;
} else {
div = CCM_GET_DIVIDER(pdr0,
MXC_CCM_PDR0_PER_PODF_MASK,
MXC_CCM_PDR0_PER_PODF_OFFSET) + 1;
- freq /= get_ahb_div(pdr0);
+ div *= get_ahb_div(pdr0);
}
return freq / div;
}
(struct ccm_regs *)IMX_CCM_BASE;
u32 pdr4 = readl(&ccm->pdr4);
- if (readl(&ccm->pdr3) & MXC_CCM_PDR3_UART_M_U) {
+ if (readl(&ccm->pdr3) & MXC_CCM_PDR3_UART_M_U)
freq = get_mcu_main_clk();
- } else {
- freq = decode_pll(readl(&ccm->ppctl),
- CONFIG_MX35_HCLK_FREQ);
- }
- freq /= ((CCM_GET_DIVIDER(pdr4,
- MXC_CCM_PDR4_UART_PRDF_MASK,
- MXC_CCM_PDR4_UART_PRDF_OFFSET) + 1) *
- (CCM_GET_DIVIDER(pdr4,
+ else
+ freq = decode_pll(readl(&ccm->ppctl), MXC_HCLK);
+ freq /= CCM_GET_DIVIDER(pdr4,
MXC_CCM_PDR4_UART_PODF_MASK,
- MXC_CCM_PDR4_UART_PODF_OFFSET) + 1));
+ MXC_CCM_PDR4_UART_PODF_OFFSET) + 1;
return freq;
}
unsigned int mxc_get_main_clock(enum mxc_main_clock clk)
{
u32 nfc_pdf, hsp_podf;
- u32 pll, ret_val = 0, usb_prdf, usb_podf;
+ u32 pll, ret_val = 0, usb_podf;
struct ccm_regs *ccm =
(struct ccm_regs *)IMX_CCM_BASE;
ret_val = pll / (nfc_pdf + 1);
break;
case USB_CLK:
- usb_prdf = (reg4 >> 25) & 0x7;
- usb_podf = (reg4 >> 22) & 0x7;
- if (reg4 & 0x200) {
+ usb_podf = (reg4 >> 22) & 0x3F;
+ if (reg4 & 0x200)
pll = get_mcu_main_clk();
- } else {
- pll = decode_pll(readl(&ccm->ppctl),
- CONFIG_MX35_HCLK_FREQ);
- }
+ else
+ pll = decode_pll(readl(&ccm->ppctl), MXC_HCLK);
- ret_val = pll / ((usb_prdf + 1) * (usb_podf + 1));
+ ret_val = pll / (usb_podf + 1);
break;
default:
printf("Unknown clock: %d\n", clk);
case UART2_BAUD:
case UART3_BAUD:
clk_sel = mpdr3 & (1 << 14);
- pre_pdf = (mpdr4 >> 13) & 0x7;
- pdf = (mpdr4 >> 10) & 0x7;
+ pdf = (mpdr4 >> 10) & 0x3F;
ret_val = ((clk_sel != 0) ? mxc_get_main_clock(CPU_CLK) :
- decode_pll(readl(&ccm->ppctl), CONFIG_MX35_HCLK_FREQ)) /
- ((pre_pdf + 1) * (pdf + 1));
+ decode_pll(readl(&ccm->ppctl), MXC_HCLK)) / (pdf + 1);
break;
case SSI1_BAUD:
pre_pdf = (mpdr2 >> 24) & 0x7;
pdf = mpdr2 & 0x3F;
clk_sel = mpdr2 & (1 << 6);
ret_val = ((clk_sel != 0) ? mxc_get_main_clock(CPU_CLK) :
- decode_pll(readl(&ccm->ppctl), CONFIG_MX35_HCLK_FREQ)) /
+ decode_pll(readl(&ccm->ppctl), MXC_HCLK)) /
((pre_pdf + 1) * (pdf + 1));
break;
case SSI2_BAUD:
pdf = (mpdr2 >> 8) & 0x3F;
clk_sel = mpdr2 & (1 << 6);
ret_val = ((clk_sel != 0) ? mxc_get_main_clock(CPU_CLK) :
- decode_pll(readl(&ccm->ppctl), CONFIG_MX35_HCLK_FREQ)) /
+ decode_pll(readl(&ccm->ppctl), MXC_HCLK)) /
((pre_pdf + 1) * (pdf + 1));
break;
case CSI_BAUD:
clk_sel = mpdr2 & (1 << 7);
- pre_pdf = (mpdr2 >> 16) & 0x7;
- pdf = (mpdr2 >> 19) & 0x7;
+ pdf = (mpdr2 >> 16) & 0x3F;
ret_val = ((clk_sel != 0) ? mxc_get_main_clock(CPU_CLK) :
- decode_pll(readl(&ccm->ppctl), CONFIG_MX35_HCLK_FREQ)) /
- ((pre_pdf + 1) * (pdf + 1));
+ decode_pll(readl(&ccm->ppctl), MXC_HCLK)) / (pdf + 1);
break;
case MSHC_CLK:
pre_pdf = readl(&ccm->pdr1);
pdf = (pre_pdf >> 22) & 0x3F;
pre_pdf = (pre_pdf >> 28) & 0x7;
ret_val = ((clk_sel != 0) ? mxc_get_main_clock(CPU_CLK) :
- decode_pll(readl(&ccm->ppctl), CONFIG_MX35_HCLK_FREQ)) /
+ decode_pll(readl(&ccm->ppctl), MXC_HCLK)) /
((pre_pdf + 1) * (pdf + 1));
break;
case ESDHC1_CLK:
clk_sel = mpdr3 & 0x40;
- pre_pdf = mpdr3 & 0x7;
- pdf = (mpdr3>>3) & 0x7;
+ pdf = mpdr3 & 0x3F;
ret_val = ((clk_sel != 0) ? mxc_get_main_clock(CPU_CLK) :
- decode_pll(readl(&ccm->ppctl), CONFIG_MX35_HCLK_FREQ)) /
- ((pre_pdf + 1) * (pdf + 1));
+ decode_pll(readl(&ccm->ppctl), MXC_HCLK)) / (pdf + 1);
break;
case ESDHC2_CLK:
clk_sel = mpdr3 & 0x40;
- pre_pdf = (mpdr3 >> 8) & 0x7;
- pdf = (mpdr3 >> 11) & 0x7;
+ pdf = (mpdr3 >> 8) & 0x3F;
ret_val = ((clk_sel != 0) ? mxc_get_main_clock(CPU_CLK) :
- decode_pll(readl(&ccm->ppctl), CONFIG_MX35_HCLK_FREQ)) /
- ((pre_pdf + 1) * (pdf + 1));
+ decode_pll(readl(&ccm->ppctl), MXC_HCLK)) / (pdf + 1);
break;
case ESDHC3_CLK:
clk_sel = mpdr3 & 0x40;
- pre_pdf = (mpdr3 >> 16) & 0x7;
- pdf = (mpdr3 >> 19) & 0x7;
+ pdf = (mpdr3 >> 16) & 0x3F;
ret_val = ((clk_sel != 0) ? mxc_get_main_clock(CPU_CLK) :
- decode_pll(readl(&ccm->ppctl), CONFIG_MX35_HCLK_FREQ)) /
- ((pre_pdf + 1) * (pdf + 1));
+ decode_pll(readl(&ccm->ppctl), MXC_HCLK)) / (pdf + 1);
break;
case SPDIF_CLK:
clk_sel = mpdr3 & 0x400000;
pre_pdf = (mpdr3 >> 29) & 0x7;
pdf = (mpdr3 >> 23) & 0x3F;
ret_val = ((clk_sel != 0) ? mxc_get_main_clock(CPU_CLK) :
- decode_pll(readl(&ccm->ppctl), CONFIG_MX35_HCLK_FREQ)) /
+ decode_pll(readl(&ccm->ppctl), MXC_HCLK)) /
((pre_pdf + 1) * (pdf + 1));
break;
default:
#include <asm/io.h>
#include <div64.h>
#include <asm/arch/imx-regs.h>
+#include <asm/arch/crm_regs.h>
#include <asm/arch/clock.h>
DECLARE_GLOBAL_DATA_PTR;
/* General purpose timers bitfields */
#define GPTCR_SWR (1<<15) /* Software reset */
#define GPTCR_FRR (1<<9) /* Freerun / restart */
-#define GPTCR_CLKSOURCE_32 (0x100<<6) /* Clock source */
-#define GPTCR_CLKSOURCE_IPG (0x001<<6) /* Clock source */
+#define GPTCR_CLKSOURCE_32 (4<<6) /* Clock source */
#define GPTCR_TEN (1) /* Timer enable */
-#define TIMER_FREQ_HZ mxc_get_clock(MXC_IPG_CLK)
-
+/*
+ * "time" is measured in 1 / CONFIG_SYS_HZ seconds,
+ * "tick" is internal timer period
+ */
+/* ~0.4% error - measured with stop-watch on 100s boot-delay */
static inline unsigned long long tick_to_time(unsigned long long tick)
{
tick *= CONFIG_SYS_HZ;
- do_div(tick, TIMER_FREQ_HZ);
+ do_div(tick, MXC_CLK32);
return tick;
}
-static inline unsigned long long us_to_tick(unsigned long long usec)
+static inline unsigned long long us_to_tick(unsigned long long us)
{
- usec *= TIMER_FREQ_HZ;
- do_div(usec, 1000000);
+ us = us * MXC_CLK32 + 999999;
+ do_div(us, 1000000);
- return usec;
+ return us;
}
+/*
+ * nothing really to do with interrupts, just starts up a counter.
+ * The 32KHz 32-bit timer overruns in 134217 seconds
+ */
int timer_init(void)
{
int i;
struct gpt_regs *gpt = (struct gpt_regs *)GPT1_BASE_ADDR;
+ struct ccm_regs *ccm = (struct ccm_regs *)CCM_BASE_ADDR;
/* setup GP Timer 1 */
writel(GPTCR_SWR, &gpt->ctrl);
- for (i = 0; i < 100; i++)
- writel(0, &gpt->ctrl); /* We have no udelay by now */
- writel(0, &gpt->pre);
- /* Freerun Mode, PERCLK1 input */
- writel(readl(&gpt->ctrl) |
- GPTCR_CLKSOURCE_IPG | GPTCR_TEN,
- &gpt->ctrl);
+ writel(readl(&ccm->cgr1) | 3 << MXC_CCM_CGR1_GPT_OFFSET, &ccm->cgr1);
+
+ for (i = 0; i < 100; i++)
+ writel(0, &gpt->ctrl); /* We have no udelay by now */
+ writel(0, &gpt->pre); /* prescaler = 1 */
+ /* Freerun Mode, 32KHz input */
+ writel(readl(&gpt->ctrl) | GPTCR_CLKSOURCE_32 | GPTCR_FRR,
+ &gpt->ctrl);
+ writel(readl(&gpt->ctrl) | GPTCR_TEN, &gpt->ctrl);
return 0;
}
{
/*
* get_ticks() returns a long long (64 bit), it wraps in
- * 2^64 / CONFIG_MX25_CLK32 = 2^64 / 2^15 = 2^49 ~ 5 * 10^14 (s) ~
+ * 2^64 / MXC_CLK32 = 2^64 / 2^15 = 2^49 ~ 5 * 10^14 (s) ~
* 5 * 10^9 days... and get_ticks() * CONFIG_SYS_HZ wraps in
* 5 * 10^6 days - long enough.
*/
*/
ulong get_tbclk(void)
{
- return TIMER_FREQ_HZ;
+ return MXC_CLK32;
}
static ulong imx_get_mpllclk(void)
{
struct ccm_regs *ccm = (struct ccm_regs *)IMX_CCM_BASE;
- ulong fref = 24000000;
+ ulong fref = MXC_HCLK;
return imx_decode_pll(readl(&ccm->mpctl), fref);
}
#include <div64.h>
#include <asm/io.h>
#include <asm/arch/imx-regs.h>
+#include <asm/arch/clock.h>
DECLARE_GLOBAL_DATA_PTR;
static inline unsigned long long tick_to_time(unsigned long long tick)
{
tick *= CONFIG_SYS_HZ;
- do_div(tick, CONFIG_MX25_CLK32);
+ do_div(tick, MXC_CLK32);
return tick;
}
static inline unsigned long long time_to_tick(unsigned long long time)
{
- time *= CONFIG_MX25_CLK32;
+ time *= MXC_CLK32;
do_div(time, CONFIG_SYS_HZ);
return time;
}
static inline unsigned long long us_to_tick(unsigned long long us)
{
- us = us * CONFIG_MX25_CLK32 + 999999;
+ us = us * MXC_CLK32 + 999999;
do_div(us, 1000000);
return us;
}
#else
/* ~2% error */
-#define TICK_PER_TIME ((CONFIG_MX25_CLK32 + CONFIG_SYS_HZ / 2) / \
- CONFIG_SYS_HZ)
-#define US_PER_TICK (1000000 / CONFIG_MX25_CLK32)
+#define TICK_PER_TIME ((MXC_CLK32 + CONFIG_SYS_HZ / 2) / CONFIG_SYS_HZ)
+#define US_PER_TICK (1000000 / MXC_CLK32)
static inline unsigned long long tick_to_time(unsigned long long tick)
{
{
/*
* get_ticks() returns a long long (64 bit), it wraps in
- * 2^64 / CONFIG_MX25_CLK32 = 2^64 / 2^15 = 2^49 ~ 5 * 10^14 (s) ~
+ * 2^64 / MXC_CLK32 = 2^64 / 2^15 = 2^49 ~ 5 * 10^14 (s) ~
* 5 * 10^9 days... and get_ticks() * CONFIG_SYS_HZ wraps in
* 5 * 10^6 days - long enough.
*/
{
ulong tbclk;
- tbclk = CONFIG_MX25_CLK32;
+ tbclk = MXC_CLK32;
return tbclk;
}
* takes a few seconds to roll. The boot doesn't take that long, so to keep the
* code simple, it doesn't take rolling into consideration.
*/
-#define HW_DIGCTRL_MICROSECONDS 0x8001c0c0
void early_delay(int delay)
{
- uint32_t st = readl(HW_DIGCTRL_MICROSECONDS);
+ struct mxs_digctl_regs *digctl_regs =
+ (struct mxs_digctl_regs *)MXS_DIGCTL_BASE;
+
+ uint32_t st = readl(&digctl_regs->hw_digctl_microseconds);
st += delay;
- while (st > readl(HW_DIGCTRL_MICROSECONDS))
+ while (st > readl(&digctl_regs->hw_digctl_microseconds))
;
}
LIB = $(obj)libimx-common.o
+ifeq ($(SOC),$(filter $(SOC),mx5 mx6))
COBJS-y = iomux-v3.o timer.o cpu.o speed.o
-COBJS-$(CONFIG_I2C_MXC) += i2c.o
+COBJS-$(CONFIG_I2C_MXC) += i2c-mxv7.o
+endif
COBJS-$(CONFIG_CMD_BMODE) += cmd_bmode.o
COBJS := $(sort $(COBJS-y))
#ifndef __ASM_ARCH_CLOCK_H
#define __ASM_ARCH_CLOCK_H
+#include <common.h>
+
+#ifdef CONFIG_MX25_HCLK_FREQ
+#define MXC_HCLK CONFIG_MX25_HCLK_FREQ
+#else
+#define MXC_HCLK 24000000
+#endif
+
+#ifdef CONFIG_MX25_CLK32
+#define MXC_CLK32 CONFIG_MX25_CLK32
+#else
+#define MXC_CLK32 32768
+#endif
+
enum mxc_clock {
MXC_CSI_CLK,
MXC_EPIT_CLK,
#ifndef __ASM_ARCH_CLOCK_H
#define __ASM_ARCH_CLOCK_H
+#include <common.h>
+
+#ifdef CONFIG_MX31_HCLK_FREQ
+#define MXC_HCLK CONFIG_MX31_HCLK_FREQ
+#else
+#define MXC_HCLK 26000000
+#endif
+
+#ifdef CONFIG_MX31_CLK32
+#define MXC_CLK32 CONFIG_MX31_CLK32
+#else
+#define MXC_CLK32 32768
+#endif
+
enum mxc_clock {
MXC_ARM_CLK,
MXC_IPG_CLK,
#ifndef __ASM_ARCH_CLOCK_H
#define __ASM_ARCH_CLOCK_H
+#include <common.h>
+
+#ifdef CONFIG_MX35_HCLK_FREQ
+#define MXC_HCLK CONFIG_MX35_HCLK_FREQ
+#else
+#define MXC_HCLK 24000000
+#endif
+
+#ifdef CONFIG_MX35_CLK32
+#define MXC_CLK32 CONFIG_MX35_CLK32
+#else
+#define MXC_CLK32 32768
+#endif
+
enum mxc_clock {
MXC_ARM_CLK,
MXC_AHB_CLK,
#define MXC_CCM_CCMR_VOL_RDY_CNT_MASK (0xF << 20)
#define MXC_CCM_CCMR_ROMW_OFFSET 18
#define MXC_CCM_CCMR_ROMW_MASK (0x3 << 18)
-#define MXC_CCM_CCMR_RAMW_OFFSET 21
-#define MXC_CCM_CCMR_RAMW_MASK (0x3 << 21)
+#define MXC_CCM_CCMR_RAMW_OFFSET 16
+#define MXC_CCM_CCMR_RAMW_MASK (0x3 << 16)
#define MXC_CCM_CCMR_LPM_OFFSET 14
#define MXC_CCM_CCMR_LPM_MASK (0x3 << 14)
#define MXC_CCM_CCMR_UPE (1 << 9)
#define MXC_CCM_PDR0_CON_MUX_DIV_MASK (0xF << 16)
#define MXC_CCM_PDR0_CKIL_SEL (1 << 15)
#define MXC_CCM_PDR0_PER_PODF_OFFSET 12
-#define MXC_CCM_PDR0_PER_PODF_MASK (0xF << 12)
+#define MXC_CCM_PDR0_PER_PODF_MASK (0x7 << 12)
#define MXC_CCM_PDR0_AUTO_MUX_DIV_OFFSET 9
#define MXC_CCM_PDR0_AUTO_MUX_DIV_MASK (0x7 << 9)
#define MXC_CCM_PDR0_AUTO_CON 0x1
#define MXC_CCM_PDR2_SSI2_PRDF_MASK (0x7 << 27)
#define MXC_CCM_PDR2_SSI1_PRDF_OFFSET 24
#define MXC_CCM_PDR2_SSI1_PRDF_MASK (0x7 << 24)
-#define MXC_CCM_PDR2_CSI_PRDF_OFFSET 19
-#define MXC_CCM_PDR2_CSI_PRDF_MASK (0x7 << 19)
#define MXC_CCM_PDR2_CSI_PODF_OFFSET 16
-#define MXC_CCM_PDR2_CSI_PODF_MASK (0x7 << 16)
+#define MXC_CCM_PDR2_CSI_PODF_MASK (0x3F << 16)
#define MXC_CCM_PDR2_SSI2_PODF_OFFSET 8
#define MXC_CCM_PDR2_SSI2_PODF_MASK (0x3F << 8)
#define MXC_CCM_PDR2_CSI_M_U (1 << 7)
#define MXC_CCM_PDR3_SPDIF_PODF_OFFSET 23
#define MXC_CCM_PDR3_SPDIF_PODF_MASK (0x3F << 23)
#define MXC_CCM_PDR3_SPDIF_M_U (1 << 22)
-#define MXC_CCM_PDR3_ESDHC3_PRDF_OFFSET 19
-#define MXC_CCM_PDR3_ESDHC3_PRDF_MASK (0x7 << 19)
#define MXC_CCM_PDR3_ESDHC3_PODF_OFFSET 16
-#define MXC_CCM_PDR3_ESDHC3_PODF_MASK (0x7 << 16)
-#define MXC_CCM_PDR3_UART_M_U (1 << 15)
-#define MXC_CCM_PDR3_ESDHC2_PRDF_OFFSET 11
-#define MXC_CCM_PDR3_ESDHC2_PRDF_MASK (0x7 << 11)
+#define MXC_CCM_PDR3_ESDHC3_PODF_MASK (0x3F << 16)
+#define MXC_CCM_PDR3_UART_M_U (1 << 14)
#define MXC_CCM_PDR3_ESDHC2_PODF_OFFSET 8
-#define MXC_CCM_PDR3_ESDHC2_PODF_MASK (0x7 << 8)
+#define MXC_CCM_PDR3_ESDHC2_PODF_MASK (0x3F << 8)
#define MXC_CCM_PDR3_ESDHC_M_U (1 << 6)
-#define MXC_CCM_PDR3_ESDHC1_PRDF_OFFSET 3
-#define MXC_CCM_PDR3_ESDHC1_PRDF_MASK (0x7 << 3)
#define MXC_CCM_PDR3_ESDHC1_PODF_OFFSET 0
-#define MXC_CCM_PDR3_ESDHC1_PODF_MASK (0x7)
+#define MXC_CCM_PDR3_ESDHC1_PODF_MASK (0x3F)
#define MXC_CCM_PDR4_NFC_PODF_OFFSET 28
#define MXC_CCM_PDR4_NFC_PODF_MASK (0xF << 28)
-#define MXC_CCM_PDR4_USB_PRDF_OFFSET 25
-#define MXC_CCM_PDR4_USB_PRDF_MASK (0x7 << 25)
#define MXC_CCM_PDR4_USB_PODF_OFFSET 22
-#define MXC_CCM_PDR4_USB_PODF_MASK (0x7 << 22)
-#define MXC_CCM_PDR4_PER0_PRDF_OFFSET 19
-#define MXC_CCM_PDR4_PER0_PRDF_MASK (0x7 << 19)
+#define MXC_CCM_PDR4_USB_PODF_MASK (0x3F << 22)
#define MXC_CCM_PDR4_PER0_PODF_OFFSET 16
-#define MXC_CCM_PDR4_PER0_PODF_MASK (0x7 << 16)
-#define MXC_CCM_PDR4_UART_PRDF_OFFSET 13
-#define MXC_CCM_PDR4_UART_PRDF_MASK (0x7 << 13)
+#define MXC_CCM_PDR4_PER0_PODF_MASK (0x3F << 16)
#define MXC_CCM_PDR4_UART_PODF_OFFSET 10
-#define MXC_CCM_PDR4_UART_PODF_MASK (0x7 << 10)
+#define MXC_CCM_PDR4_UART_PODF_MASK (0x3F << 10)
#define MXC_CCM_PDR4_USB_M_U (1 << 9)
/* Bit definitions for RCSR */
#define MXC_CCM_ACMR_SSI2_CLK_SEL_MASK (0xF << 0)
/* Bit definitions for Clock gating Register*/
+#define MXC_CCM_CGR_CG_MASK 0x3
+#define MXC_CCM_CGR_CG_OFF 0x0
+#define MXC_CCM_CGR_CG_RUN_ON 0x1
+#define MXC_CCM_CGR_CG_RUN_WAIT_ON 0x2
+#define MXC_CCM_CGR_CG_ON 0x3
+
#define MXC_CCM_CGR0_ASRC_OFFSET 0
#define MXC_CCM_CGR0_ASRC_MASK (0x3 << 0)
#define MXC_CCM_CGR0_ATA_OFFSET 2
#define MXC_CCM_COSR_CLKOSEL_OFFSET 0
#define MXC_CCM_COSR_CLKOEN (1 << 5)
#define MXC_CCM_COSR_CLKOUTDIV_1 (1 << 6)
-#define MXC_CCM_COSR_CLKOUT_PREDIV_MASK (0x7 << 10)
-#define MXC_CCM_COSR_CLKOUT_PREDIV_OFFSET 10
-#define MXC_CCM_COSR_CLKOUT_PRODIV_MASK (0x7 << 13)
-#define MXC_CCM_COSR_CLKOUT_PRODIV_OFFSET 13
+#define MXC_CCM_COSR_CLKOUT_DIV_MASK (0x3F << 10)
+#define MXC_CCM_COSR_CLKOUT_DIV_OFFSET 10
#define MXC_CCM_COSR_SSI1_RX_SRC_SEL_MASK (0x3 << 16)
#define MXC_CCM_COSR_SSI1_RX_SRC_SEL_OFFSET 16
#define MXC_CCM_COSR_SSI1_TX_SRC_SEL_MASK (0x3 << 18)
#define IOMUXC_GPR13_SATA_PHY_2_MASK (0x1f<<2)
#define IOMUXC_GPR13_SATA_PHY_1_MASK (3<<0)
-#define IOMUXC_GPR13_SATA_PHY_8_RXEQ_0P5DB (0b000<<24)
-#define IOMUXC_GPR13_SATA_PHY_8_RXEQ_1P0DB (0b001<<24)
-#define IOMUXC_GPR13_SATA_PHY_8_RXEQ_1P5DB (0b010<<24)
-#define IOMUXC_GPR13_SATA_PHY_8_RXEQ_2P0DB (0b011<<24)
-#define IOMUXC_GPR13_SATA_PHY_8_RXEQ_2P5DB (0b100<<24)
-#define IOMUXC_GPR13_SATA_PHY_8_RXEQ_3P0DB (0b101<<24)
-#define IOMUXC_GPR13_SATA_PHY_8_RXEQ_3P5DB (0b110<<24)
-#define IOMUXC_GPR13_SATA_PHY_8_RXEQ_4P0DB (0b111<<24)
+#define IOMUXC_GPR13_SATA_PHY_8_RXEQ_0P5DB (0<<24)
+#define IOMUXC_GPR13_SATA_PHY_8_RXEQ_1P0DB (1<<24)
+#define IOMUXC_GPR13_SATA_PHY_8_RXEQ_1P5DB (2<<24)
+#define IOMUXC_GPR13_SATA_PHY_8_RXEQ_2P0DB (3<<24)
+#define IOMUXC_GPR13_SATA_PHY_8_RXEQ_2P5DB (4<<24)
+#define IOMUXC_GPR13_SATA_PHY_8_RXEQ_3P0DB (5<<24)
+#define IOMUXC_GPR13_SATA_PHY_8_RXEQ_3P5DB (6<<24)
+#define IOMUXC_GPR13_SATA_PHY_8_RXEQ_4P0DB (7<<24)
-#define IOMUXC_GPR13_SATA_PHY_7_SATA1I (0b10000<<19)
-#define IOMUXC_GPR13_SATA_PHY_7_SATA1M (0b10000<<19)
-#define IOMUXC_GPR13_SATA_PHY_7_SATA1X (0b11010<<19)
-#define IOMUXC_GPR13_SATA_PHY_7_SATA2I (0b10010<<19)
-#define IOMUXC_GPR13_SATA_PHY_7_SATA2M (0b10010<<19)
-#define IOMUXC_GPR13_SATA_PHY_7_SATA2X (0b11010<<19)
+#define IOMUXC_GPR13_SATA_PHY_7_SATA1I (0x10<<19)
+#define IOMUXC_GPR13_SATA_PHY_7_SATA1M (0x10<<19)
+#define IOMUXC_GPR13_SATA_PHY_7_SATA1X (0x1A<<19)
+#define IOMUXC_GPR13_SATA_PHY_7_SATA2I (0x12<<19)
+#define IOMUXC_GPR13_SATA_PHY_7_SATA2M (0x12<<19)
+#define IOMUXC_GPR13_SATA_PHY_7_SATA2X (0x1A<<19)
#define IOMUXC_GPR13_SATA_SPEED_1P5G (0<<15)
#define IOMUXC_GPR13_SATA_SPEED_3G (1<<15)
#define IOMUXC_GPR13_SATA_SATA_PHY_4_ATTEN_9_16 (4<<11)
#define IOMUXC_GPR13_SATA_SATA_PHY_4_ATTEN_8_16 (5<<11)
-#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_0P00_DB (0b0000<<7)
-#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_0P37_DB (0b0001<<7)
-#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_0P74_DB (0b0010<<7)
-#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_1P11_DB (0b0011<<7)
-#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_1P48_DB (0b0100<<7)
-#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_1P85_DB (0b0101<<7)
-#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_2P22_DB (0b0110<<7)
-#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_2P59_DB (0b0111<<7)
-#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_2P96_DB (0b1000<<7)
-#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_3P33_DB (0b1001<<7)
-#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_3P70_DB (0b1010<<7)
-#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_4P07_DB (0b1011<<7)
-#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_4P44_DB (0b1100<<7)
-#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_4P81_DB (0b1101<<7)
-#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_5P28_DB (0b1110<<7)
-#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_5P75_DB (0b1111<<7)
+#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_0P00_DB (0<<7)
+#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_0P37_DB (1<<7)
+#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_0P74_DB (2<<7)
+#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_1P11_DB (3<<7)
+#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_1P48_DB (4<<7)
+#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_1P85_DB (5<<7)
+#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_2P22_DB (6<<7)
+#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_2P59_DB (7<<7)
+#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_2P96_DB (8<<7)
+#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_3P33_DB (9<<7)
+#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_3P70_DB (0xA<<7)
+#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_4P07_DB (0xB<<7)
+#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_4P44_DB (0xC<<7)
+#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_4P81_DB (0xD<<7)
+#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_5P28_DB (0xE<<7)
+#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_5P75_DB (0xF<<7)
-#define IOMUXC_GPR13_SATA_PHY_2_TX_0P937V (0b00000<<2)
-#define IOMUXC_GPR13_SATA_PHY_2_TX_0P947V (0b00001<<2)
-#define IOMUXC_GPR13_SATA_PHY_2_TX_0P957V (0b00010<<2)
-#define IOMUXC_GPR13_SATA_PHY_2_TX_0P966V (0b00011<<2)
-#define IOMUXC_GPR13_SATA_PHY_2_TX_0P976V (0b00100<<2)
-#define IOMUXC_GPR13_SATA_PHY_2_TX_0P986V (0b00101<<2)
-#define IOMUXC_GPR13_SATA_PHY_2_TX_0P996V (0b00110<<2)
-#define IOMUXC_GPR13_SATA_PHY_2_TX_1P005V (0b00111<<2)
-#define IOMUXC_GPR13_SATA_PHY_2_TX_1P015V (0b01000<<2)
-#define IOMUXC_GPR13_SATA_PHY_2_TX_1P025V (0b01001<<2)
-#define IOMUXC_GPR13_SATA_PHY_2_TX_1P035V (0b01010<<2)
-#define IOMUXC_GPR13_SATA_PHY_2_TX_1P045V (0b01011<<2)
-#define IOMUXC_GPR13_SATA_PHY_2_TX_1P054V (0b01100<<2)
-#define IOMUXC_GPR13_SATA_PHY_2_TX_1P064V (0b01101<<2)
-#define IOMUXC_GPR13_SATA_PHY_2_TX_1P074V (0b01110<<2)
-#define IOMUXC_GPR13_SATA_PHY_2_TX_1P084V (0b01111<<2)
-#define IOMUXC_GPR13_SATA_PHY_2_TX_1P094V (0b10000<<2)
-#define IOMUXC_GPR13_SATA_PHY_2_TX_1P104V (0b10001<<2)
-#define IOMUXC_GPR13_SATA_PHY_2_TX_1P113V (0b10010<<2)
-#define IOMUXC_GPR13_SATA_PHY_2_TX_1P123V (0b10011<<2)
-#define IOMUXC_GPR13_SATA_PHY_2_TX_1P133V (0b10100<<2)
-#define IOMUXC_GPR13_SATA_PHY_2_TX_1P143V (0b10101<<2)
-#define IOMUXC_GPR13_SATA_PHY_2_TX_1P152V (0b10110<<2)
-#define IOMUXC_GPR13_SATA_PHY_2_TX_1P162V (0b10111<<2)
-#define IOMUXC_GPR13_SATA_PHY_2_TX_1P172V (0b11000<<2)
-#define IOMUXC_GPR13_SATA_PHY_2_TX_1P182V (0b11001<<2)
-#define IOMUXC_GPR13_SATA_PHY_2_TX_1P191V (0b11010<<2)
-#define IOMUXC_GPR13_SATA_PHY_2_TX_1P201V (0b11011<<2)
-#define IOMUXC_GPR13_SATA_PHY_2_TX_1P211V (0b11100<<2)
-#define IOMUXC_GPR13_SATA_PHY_2_TX_1P221V (0b11101<<2)
-#define IOMUXC_GPR13_SATA_PHY_2_TX_1P230V (0b11110<<2)
-#define IOMUXC_GPR13_SATA_PHY_2_TX_1P240V (0b11111<<2)
+#define IOMUXC_GPR13_SATA_PHY_2_TX_0P937V (0<<2)
+#define IOMUXC_GPR13_SATA_PHY_2_TX_0P947V (1<<2)
+#define IOMUXC_GPR13_SATA_PHY_2_TX_0P957V (2<<2)
+#define IOMUXC_GPR13_SATA_PHY_2_TX_0P966V (3<<2)
+#define IOMUXC_GPR13_SATA_PHY_2_TX_0P976V (4<<2)
+#define IOMUXC_GPR13_SATA_PHY_2_TX_0P986V (5<<2)
+#define IOMUXC_GPR13_SATA_PHY_2_TX_0P996V (6<<2)
+#define IOMUXC_GPR13_SATA_PHY_2_TX_1P005V (7<<2)
+#define IOMUXC_GPR13_SATA_PHY_2_TX_1P015V (8<<2)
+#define IOMUXC_GPR13_SATA_PHY_2_TX_1P025V (9<<2)
+#define IOMUXC_GPR13_SATA_PHY_2_TX_1P035V (0xA<<2)
+#define IOMUXC_GPR13_SATA_PHY_2_TX_1P045V (0xB<<2)
+#define IOMUXC_GPR13_SATA_PHY_2_TX_1P054V (0xC<<2)
+#define IOMUXC_GPR13_SATA_PHY_2_TX_1P064V (0xD<<2)
+#define IOMUXC_GPR13_SATA_PHY_2_TX_1P074V (0xE<<2)
+#define IOMUXC_GPR13_SATA_PHY_2_TX_1P084V (0xF<<2)
+#define IOMUXC_GPR13_SATA_PHY_2_TX_1P094V (0x10<<2)
+#define IOMUXC_GPR13_SATA_PHY_2_TX_1P104V (0x11<<2)
+#define IOMUXC_GPR13_SATA_PHY_2_TX_1P113V (0x12<<2)
+#define IOMUXC_GPR13_SATA_PHY_2_TX_1P123V (0x13<<2)
+#define IOMUXC_GPR13_SATA_PHY_2_TX_1P133V (0x14<<2)
+#define IOMUXC_GPR13_SATA_PHY_2_TX_1P143V (0x15<<2)
+#define IOMUXC_GPR13_SATA_PHY_2_TX_1P152V (0x16<<2)
+#define IOMUXC_GPR13_SATA_PHY_2_TX_1P162V (0x17<<2)
+#define IOMUXC_GPR13_SATA_PHY_2_TX_1P172V (0x18<<2)
+#define IOMUXC_GPR13_SATA_PHY_2_TX_1P182V (0x19<<2)
+#define IOMUXC_GPR13_SATA_PHY_2_TX_1P191V (0x1A<<2)
+#define IOMUXC_GPR13_SATA_PHY_2_TX_1P201V (0x1B<<2)
+#define IOMUXC_GPR13_SATA_PHY_2_TX_1P211V (0x1C<<2)
+#define IOMUXC_GPR13_SATA_PHY_2_TX_1P221V (0x1D<<2)
+#define IOMUXC_GPR13_SATA_PHY_2_TX_1P230V (0x1E<<2)
+#define IOMUXC_GPR13_SATA_PHY_2_TX_1P240V (0x1F<<2)
#define IOMUXC_GPR13_SATA_PHY_1_FAST 0
#define IOMUXC_GPR13_SATA_PHY_1_MEDIUM 1
#define HW_DRAM_CTL29_CONFIG (CS_MAP << 24 | COLUMN_SIZE << 16 | \
ADDR_PINS << 8 | APREBIT)
-void mx28_adjust_memory_params(uint32_t *dram_vals)
+void mxs_adjust_memory_params(uint32_t *dram_vals)
{
dram_vals[HW_DRAM_CTL29] = HW_DRAM_CTL29_CONFIG;
}
/* SSP0 clock at 96MHz */
mx28_set_sspclk(MXC_SSPCLK0, 96000, 0);
- /* SSP2 clock at 96MHz */
- mx28_set_sspclk(MXC_SSPCLK2, 96000, 0);
+ /* SSP2 clock at 160MHz */
+ mx28_set_sspclk(MXC_SSPCLK2, 160000, 0);
#ifdef CONFIG_CMD_USB
mxs_iomux_setup_pad(MX28_PAD_SSP2_SS1__USB1_OVERCURRENT);
Flashing U-Boot
--------------------------------
-There are two options: the original bootloader in NAND can be replaced with
-u-boot, or u-boot can be stored on the NOR flash without erasing
-the delivered bootloader.
+U-boot should be stored on the NOR flash.
+
The boot storage can be select using the switches on the personality board
(SW1-SW2) and on the DEBUG board (SW4-SW10).
-The second option is to be preferred if you have not a JTAG debugger.
If something goes wrong flashing the bootloader, it is always possible to
recover the board booting from the other device.
-Replacing the bootloader on the NAND
---------------------------------------
-To replace RedBoot with U-Boot, the easy way is to do this in linux.
-Start the kernel with the suggested options. Make sure to have set the
-mtdparts exactly as described, because this matches the layout on the
-mx35pdk.
-
-You should see in your boot log the following entries for the NAND
-flash:
-
-5 cmdlinepart partitions found on MTD device mxc_nand
-Creating 5 MTD partitions on "mxc_nand":
-0x000000000000-0x000000100000 : "boot"
-0x000000100000-0x000000600000 : "linux"
-0x000000600000-0x000006600000 : "root"
-0x000006600000-0x000006e00000 : "cfg"
-0x000006e00000-0x000080000000 : "user"
-
-You can use the utilities flash_eraseall and nandwrite to put
-u-boot on the NAND. The bootloader is marked as "boot", and 1MB is
-reserved. If everything is correct, this partition is accessed as
-/dev/mtd4. However, check if it is correct with "cat /proc/mtd" and
-get the device node from the partition name:
-
-$ cat /proc/mtd | grep boot
-
-I suggest you try the utilities on a different partition to be sure
-if everything works correctly. If not, and you remove RedBoot, you have to
-reinstall it using the ATK tool as suggested by Freescale, or using a
-JTAG debugger.
-
-I report the versions of the utilities I used (they are provided with ELDK):
-
--bash-3.2# nandwrite --version
-nandwrite $Revision: 1.32 $
-
-flash_eraseall --version
-flash_eraseall $Revision: 1.22 $
-
-nandwrite reports a warning if the file to be saved is not sector aligned.
-This should have no consequences, but I preferred to pad u-boot.bin
-to get no problem at all.
-$ dd if=/dev/zero of=zeros bs=1 count=74800
-$ cat u-boot.bin zeros > u-boot-padded.bin
-
-To erase the partition:
-$ flash_eraseall /dev/mtd4
-
-Writing u-boot:
-
-$ nandwrite /dev/mtd4 u-boot-padded.bin
-
-Now U-Boot is stored on the booting partition.
-
-To boot from NAND, you have to select the switches as follows:
-
-Personality board
- SW2 1, 4, 5 on
- 2, 3, 6, 7, 8 off
- SW1 all off
-
-Debug Board:
- SW5 0
- SW6 0
- SW7 0
- SW8 1
- SW9 1
- SW10 0
-
-
Saving U-Boot in the NOR flash
---------------------------------
-The procedure to save in the NOR flash is quite the same as to write into the NAND.
-
Check the partition for boot in the NOR flash. Setting the mtdparts as reported,
the boot partition should be /dev/mtd0.
#include <i2c.h>
#include <pmic.h>
#include <fsl_pmic.h>
+#include <mmc.h>
+#include <fsl_esdhc.h>
#include <mc9sdz60.h>
#include <mc13892.h>
#include <linux/types.h>
return rc;
}
+
+#if defined(CONFIG_FSL_ESDHC)
+
+struct fsl_esdhc_cfg esdhc_cfg = {MMC_SDHC1_BASE_ADDR};
+
+int board_mmc_init(bd_t *bis)
+{
+ /* configure pins for SDHC1 only */
+ mxc_request_iomux(MX35_PIN_SD1_CMD, MUX_CONFIG_FUNC);
+ mxc_request_iomux(MX35_PIN_SD1_CLK, MUX_CONFIG_FUNC);
+ mxc_request_iomux(MX35_PIN_SD1_DATA0, MUX_CONFIG_FUNC);
+ mxc_request_iomux(MX35_PIN_SD1_DATA1, MUX_CONFIG_FUNC);
+ mxc_request_iomux(MX35_PIN_SD1_DATA2, MUX_CONFIG_FUNC);
+ mxc_request_iomux(MX35_PIN_SD1_DATA3, MUX_CONFIG_FUNC);
+
+ return fsl_esdhc_initialize(bis, &esdhc_cfg);
+}
+
+int board_mmc_getcd(struct mmc *mmc)
+{
+ return !(mc9sdz60_reg_read(MC9SDZ60_REG_DES_FLAG) & 0x4);
+}
+#endif
static void setup_iomux_enet(void)
{
- gpio_direction_output(87, 0); /* GPIO 3-23 */
- gpio_direction_output(190, 1); /* GPIO 6-30 */
- gpio_direction_output(185, 1); /* GPIO 6-25 */
- gpio_direction_output(187, 1); /* GPIO 6-27 */
- gpio_direction_output(188, 1); /* GPIO 6-28*/
- gpio_direction_output(189, 1); /* GPIO 6-29 */
+ gpio_direction_output(IMX_GPIO_NR(3, 23), 0);
+ gpio_direction_output(IMX_GPIO_NR(6, 30), 1);
+ gpio_direction_output(IMX_GPIO_NR(6, 25), 1);
+ gpio_direction_output(IMX_GPIO_NR(6, 27), 1);
+ gpio_direction_output(IMX_GPIO_NR(6, 28), 1);
+ gpio_direction_output(IMX_GPIO_NR(6, 29), 1);
imx_iomux_v3_setup_multiple_pads(enet_pads1, ARRAY_SIZE(enet_pads1));
- gpio_direction_output(184, 1); /* GPIO 6-24 */
+ gpio_direction_output(IMX_GPIO_NR(6, 24), 1);
/* Need delay 10ms according to KSZ9021 spec */
udelay(1000 * 10);
- gpio_set_value(87, 1); /* GPIO 3-23 */
+ gpio_set_value(IMX_GPIO_NR(3, 23), 1);
imx_iomux_v3_setup_multiple_pads(enet_pads2, ARRAY_SIZE(enet_pads2));
}
int ret;
if (cfg->esdhc_base == USDHC3_BASE_ADDR) {
- gpio_direction_input(192); /*GPIO7_0*/
- ret = !gpio_get_value(192);
+ gpio_direction_input(IMX_GPIO_NR(7, 0));
+ ret = !gpio_get_value(IMX_GPIO_NR(7, 0));
} else {
- gpio_direction_input(38); /*GPIO2_6*/
- ret = !gpio_get_value(38);
+ gpio_direction_input(IMX_GPIO_NR(2, 6));
+ ret = !gpio_get_value(IMX_GPIO_NR(2, 6));
}
return ret;
LIB = $(obj)lib$(BOARD).o
-COBJS := efikamx.o
-
-ifdef CONFIG_CMD_USB
-COBJS += efikamx-usb.o
-endif
+COBJS := efikamx.o efikamx-usb.o
SRCS := $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
if (port)
mdelay(10);
}
+
+/*
+ * Ethernet on the Smarttop is on the USB bus. Rather than give an error about
+ * "CPU Net Initialization Failed", just pass this test since no other settings
+ * are required. Smartbook doesn't have built-in Ethernet but we will let it
+ * pass anyway considering someone may have plugged in a USB stick and all
+ * they need to do is run "usb start".
+ */
+int board_eth_init(bd_t *bis)
+{
+ return 0;
+}
ARRAY_SIZE(efikamx_pata_pads));
setup_iomux_usb();
- if (machine_is_efikasb())
- setenv("preboot", "usb reset ; setenv stdin usbkbd\0");
-
return 0;
}
(uint32_t)(priv->desc->cmd.address + cache_data_count));
}
+ /* Invalidate the area, so no writeback into the RAM races with DMA */
+ invalidate_dcache_range((uint32_t)priv->desc->cmd.address,
+ (uint32_t)(priv->desc->cmd.address + cache_data_count));
+
priv->desc->cmd.data |= MXS_DMA_DESC_IRQ | MXS_DMA_DESC_DEC_SEM |
(data_count << MXS_DMA_DESC_BYTES_OFFSET);
struct mxs_dma_desc *dp;
uint32_t ctrl0;
uint32_t cache_data_count;
+ const uint32_t dstart = (uint32_t)data;
int dmach;
int tl;
+ int ret = 0;
ALLOC_CACHE_ALIGN_BUFFER(struct mxs_dma_desc, desc, desc_count);
if (!write)
ctrl0 |= SSP_CTRL0_READ;
- writel(length, &ssp_regs->hw_ssp_xfer_size);
-
if (length % ARCH_DMA_MINALIGN)
cache_data_count = roundup(length, ARCH_DMA_MINALIGN);
else
cache_data_count = length;
+ /* Flush data to DRAM so DMA can pick them up */
if (write)
- /* Flush data to DRAM so DMA can pick them up */
- flush_dcache_range((uint32_t)data,
- (uint32_t)(data + cache_data_count));
+ flush_dcache_range(dstart, dstart + cache_data_count);
+
+ /* Invalidate the area, so no writeback into the RAM races with DMA */
+ invalidate_dcache_range(dstart, dstart + cache_data_count);
dmach = MXS_DMA_CHANNEL_AHB_APBH_SSP0 + slave->slave.bus;
tl = min(length, xfer_max_sz);
dp->cmd.data |=
- (tl << MXS_DMA_DESC_BYTES_OFFSET) |
- (1 << MXS_DMA_DESC_PIO_WORDS_OFFSET) |
+ ((tl & 0xffff) << MXS_DMA_DESC_BYTES_OFFSET) |
+ (4 << MXS_DMA_DESC_PIO_WORDS_OFFSET) |
MXS_DMA_DESC_HALT_ON_TERMINATE |
MXS_DMA_DESC_TERMINATE_FLUSH;
- dp->cmd.pio_words[0] = ctrl0;
data += tl;
length -= tl;
+ if (!length) {
+ dp->cmd.data |= MXS_DMA_DESC_IRQ | MXS_DMA_DESC_DEC_SEM;
+
+ if (flags & SPI_XFER_END) {
+ ctrl0 &= ~SSP_CTRL0_LOCK_CS;
+ ctrl0 |= SSP_CTRL0_IGNORE_CRC;
+ }
+ }
+
+ /*
+ * Write CTRL0, CMD0, CMD1, XFER_SIZE registers. It is
+ * essential that the XFER_SIZE register is written on
+ * a per-descriptor basis with the same size as is the
+ * descriptor!
+ */
+ dp->cmd.pio_words[0] = ctrl0;
+ dp->cmd.pio_words[1] = 0;
+ dp->cmd.pio_words[2] = 0;
+ dp->cmd.pio_words[3] = tl;
+
mxs_dma_desc_append(dmach, dp);
dp++;
}
- dp->address = (dma_addr_t)dp;
- dp->cmd.address = (dma_addr_t)0;
- dp->cmd.data = MXS_DMA_DESC_COMMAND_NO_DMAXFER |
- (1 << MXS_DMA_DESC_PIO_WORDS_OFFSET) |
- MXS_DMA_DESC_IRQ | MXS_DMA_DESC_DEC_SEM;
- if (flags & SPI_XFER_END) {
- ctrl0 &= ~SSP_CTRL0_LOCK_CS;
- dp->cmd.pio_words[0] = ctrl0 | SSP_CTRL0_IGNORE_CRC;
- }
- mxs_dma_desc_append(dmach, dp);
-
if (mxs_dma_go(dmach))
- return -EINVAL;
+ ret = -EINVAL;
/* The data arrived into DRAM, invalidate cache over them */
- if (!write) {
- invalidate_dcache_range((uint32_t)data,
- (uint32_t)(data + cache_data_count));
- }
+ if (!write)
+ invalidate_dcache_range(dstart, dstart + cache_data_count);
- return 0;
+ return ret;
}
int spi_xfer(struct spi_slave *slave, unsigned int bitlen,
/* High Level Configuration Options */
#define CONFIG_ARM1136 /* This is an arm1136 CPU core */
#define CONFIG_MX35
-#define CONFIG_MX35_HCLK_FREQ 24000000
#define CONFIG_SYS_DCACHE_OFF
#define CONFIG_SYS_CACHELINE_SIZE 32
/* Ethernet on FEC */
#define CONFIG_NET_MULTI
#define CONFIG_MII
-#define CONFIG_DISCOVER_PHY
#define CONFIG_FEC_MXC
#define IMX_FEC_BASE FEC_BASE_ADDR
#define CONFIG_PHY_ADDR CONFIG_FEC_MXC_PHYADDR
#define CONFIG_RESET_PHY_R
#define CONFIG_FEC_MXC_NO_ANEG
-#define CONFIG_PRIME "FEC0"
+#define CONFIG_ETHPRIME "FEC0"
/* SPI */
#define CONFIG_HARD_SPI
/* High Level Configuration Options */
#define CONFIG_ARM1136 1 /* This is an arm1136 CPU core */
#define CONFIG_MX31 1 /* in a mx31 */
-#define CONFIG_MX31_HCLK_FREQ 26000000
#define CONFIG_MX31_CLK32 32000
#define CONFIG_DISPLAY_CPUINFO
/* High Level Configuration Options */
#define CONFIG_ARM1136 /* This is an arm1136 CPU core */
#define CONFIG_MX31 /* in a mx31 */
-#define CONFIG_MX31_HCLK_FREQ 26000000
#define CONFIG_MX31_CLK32 32000
#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_LZO
#define CONFIG_MTD_DEVICE
#define CONFIG_MTD_PARTITIONS
-#define MTDIDS_DEFAULT "nand0=gpmi-nand.0"
+#define MTDIDS_DEFAULT "nand0=gpmi-nand"
#define MTDPARTS_DEFAULT \
- "mtdparts=gpmi-nand.0:" \
+ "mtdparts=gpmi-nand:" \
"3m(bootloader)ro," \
"512k(environment)," \
"512k(redundant-environment)," \
/* High Level Configuration Options */
-#define CONFIG_MX25_CLK32 32768 /* OSC32K frequency */
#define CONFIG_SYS_HZ 1000
#define CONFIG_SYS_TEXT_BASE 0x81200000
#define CONFIG_EHCI_MXS_PORT 1
#define CONFIG_EHCI_IS_TDI
#define CONFIG_USB_STORAGE
+#define CONFIG_USB_HOST_ETHER
+#define CONFIG_USB_ETHER_ASIX
+#define CONFIG_USB_ETHER_SMSC95XX
#endif
/* I2C */
#ifdef CONFIG_CMD_SPI
#define CONFIG_HARD_SPI
#define CONFIG_MXS_SPI
+#define CONFIG_MXS_SPI_DMA_ENABLE
#define CONFIG_SPI_HALF_DUPLEX
#define CONFIG_DEFAULT_SPI_BUS 2
#define CONFIG_DEFAULT_SPI_MODE SPI_MODE_0
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_BOOTDELAY 3
#define CONFIG_BOOTFILE "uImage"
-#define CONFIG_BOOTCOMMAND "run bootcmd_net"
#define CONFIG_LOADADDR 0x42000000
#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
#define CONFIG_OF_LIBFDT
* Extra Environments
*/
#define CONFIG_EXTRA_ENV_SETTINGS \
- "console_fsl=console=ttyAM0" \
- "console_mainline=console=ttyAMA0" \
- "netargs=setenv bootargs console=${console_mainline}" \
+ "update_nand_full_filename=u-boot.nand\0" \
+ "update_nand_firmware_filename=u-boot.sb\0" \
+ "update_sd_firmware_filename=u-boot.sd\0" \
+ "update_nand_firmware_maxsz=0x100000\0" \
+ "update_nand_stride=0x40\0" /* MX28 datasheet ch. 12.12 */ \
+ "update_nand_count=0x4\0" /* MX28 datasheet ch. 12.12 */ \
+ "update_nand_get_fcb_size=" /* Get size of FCB blocks */ \
+ "nand device 0 ; " \
+ "nand info ; " \
+ "setexpr fcb_sz ${update_nand_stride} * ${update_nand_count};" \
+ "setexpr update_nand_fcb ${fcb_sz} * ${nand_writesize}\0" \
+ "update_nand_full=" /* Update FCB, DBBT and FW */ \
+ "if tftp ${update_nand_full_filename} ; then " \
+ "run update_nand_get_fcb_size ; " \
+ "nand scrub -y 0x0 ${filesize} ; " \
+ "nand write.raw ${loadaddr} 0x0 ${update_nand_fcb} ; " \
+ "setexpr update_off ${loadaddr} + ${update_nand_fcb} ; " \
+ "setexpr update_sz ${filesize} - ${update_nand_fcb} ; " \
+ "nand write ${update_off} ${update_nand_fcb} ${update_sz} ; " \
+ "fi\0" \
+ "update_nand_firmware=" /* Update only firmware */ \
+ "if tftp ${update_nand_firmware_filename} ; then " \
+ "run update_nand_get_fcb_size ; " \
+ "setexpr fcb_sz ${update_nand_fcb} * 2 ; " /* FCB + DBBT */ \
+ "setexpr fw_sz ${update_nand_firmware_maxsz} * 2 ; " \
+ "setexpr fw_off ${fcb_sz} + ${update_nand_firmware_maxsz};" \
+ "nand erase ${fcb_sz} ${fw_sz} ; " \
+ "nand write ${loadaddr} ${fcb_sz} ${filesize} ; " \
+ "nand write ${loadaddr} ${fw_off} ${filesize} ; " \
+ "fi\0" \
+ "update_sd_firmware=" /* Update the SD firmware partition */ \
+ "if mmc rescan ; then " \
+ "if tftp ${update_sd_firmware_filename} ; then " \
+ "setexpr fw_sz ${filesize} / 0x200 ; " /* SD block size */ \
+ "setexpr fw_sz ${fw_sz} + 1 ; " \
+ "mmc write ${loadaddr} 0x800 ${fw_sz} ; " \
+ "fi ; " \
+ "fi\0" \
+ "script=boot.scr\0" \
+ "uimage=uImage\0" \
+ "console_fsl=ttyAM0\0" \
+ "console_mainline=ttyAMA0\0" \
+ "mmcdev=0\0" \
+ "mmcpart=2\0" \
+ "mmcroot=/dev/mmcblk0p3 rw\0" \
+ "mmcrootfstype=ext3 rootwait\0" \
+ "mmcargs=setenv bootargs console=${console_mainline},${baudrate} " \
+ "root=${mmcroot} " \
+ "rootfstype=${mmcrootfstype}\0" \
+ "loadbootscript=" \
+ "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
+ "bootscript=echo Running bootscript from mmc ...; " \
+ "source\0" \
+ "loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \
+ "mmcboot=echo Booting from mmc ...; " \
+ "run mmcargs; " \
+ "bootm\0" \
+ "netargs=setenv bootargs console=${console_mainline},${baudrate} " \
"root=/dev/nfs " \
- "ip=dhcp nfsroot=${serverip}:${nfsroot}\0" \
- "bootcmd_net=echo Booting from net ...; " \
- "run netargs; " \
- "dhcp ${uimage}; bootm\0" \
+ "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
+ "netboot=echo Booting from net ...; " \
+ "run netargs; " \
+ "dhcp ${uimage}; bootm\0"
+
+#define CONFIG_BOOTCOMMAND \
+ "if mmc rescan ${mmcdev}; then " \
+ "if run loadbootscript; then " \
+ "run bootscript; " \
+ "else " \
+ "if run loaduimage; then " \
+ "run mmcboot; " \
+ "else run netboot; " \
+ "fi; " \
+ "fi; " \
+ "else run netboot; fi"
#endif /* __MX28EVK_CONFIG_H__ */
/* High Level Configuration Options */
#define CONFIG_ARM1136 1 /* This is an arm1136 CPU core */
#define CONFIG_MX31 1 /* in a mx31 */
-#define CONFIG_MX31_HCLK_FREQ 26000000 /* RedBoot says 26MHz */
-#define CONFIG_MX31_CLK32 32768
#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO
/* High Level Configuration Options */
#define CONFIG_ARM1136 /* This is an arm1136 CPU core */
#define CONFIG_MX31 /* in a mx31 */
-#define CONFIG_MX31_HCLK_FREQ 26000000
-#define CONFIG_MX31_CLK32 32768
#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO
/* High Level Configuration Options */
#define CONFIG_ARM1136 /* This is an arm1136 CPU core */
#define CONFIG_MX35
-#define CONFIG_MX35_HCLK_FREQ 24000000
#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_NET_RETRY_COUNT 100
#define CONFIG_CMD_DATE
+#define CONFIG_CMD_MMC
+#define CONFIG_DOS_PARTITION
+#define CONFIG_EFI_PARTITION
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
+
#define CONFIG_BOOTDELAY 3
#define CONFIG_LOADADDR 0x80800000 /* loadaddr env var */
#define CONFIG_MXC_NAND_HWECC
#define CONFIG_SYS_NAND_LARGEPAGE
+/* mmc driver */
+#define CONFIG_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_FSL_ESDHC
+#define CONFIG_SYS_FSL_ESDHC_ADDR 0
+#define CONFIG_SYS_FSL_ESDHC_NUM 1
+
/*
* Default environment and default scripts
* to update uboot and load kernel
"u-boot=" xstr(CONFIG_HOSTNAME) "/u-boot.bin\0" \
"load=tftp ${loadaddr} ${u-boot}\0" \
"uboot_addr=" xstr(CONFIG_SYS_MONITOR_BASE) "\0" \
- "update=protect off ${uboot_addr} +40000;" \
- "erase ${uboot_addr} +40000;" \
+ "update=protect off ${uboot_addr} +80000;" \
+ "erase ${uboot_addr} +80000;" \
"cp.b ${loadaddr} ${uboot_addr} ${filesize}\0" \
"upd=if run load;then echo Updating u-boot;if run update;" \
"then echo U-Boot updated;" \
#define CONFIG_ARM1136 /* This is an arm1136 CPU core */
#define CONFIG_MX31 /* in a mx31 */
#define CONFIG_QONG
-#define CONFIG_MX31_HCLK_FREQ 26000000 /* 26MHz */
-#define CONFIG_MX31_CLK32 32768
#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO
#include <asm/arch/regs-base.h>
#define CONFIG_SYS_NO_FLASH
-#define CONFIG_SYS_ICACHE_OFF
-#define CONFIG_SYS_DCACHE_OFF
#define CONFIG_BOARD_EARLY_INIT_F
#define CONFIG_ARCH_CPU_INIT
#define CONFIG_ARCH_MISC_INIT
/* High Level Configuration Options */
#define CONFIG_ARM1136
#define CONFIG_MX31
-#define CONFIG_MX31_HCLK_FREQ 26000000
-#define CONFIG_MX31_CLK32 32768
#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO
#define CONFIG_ARM926EJS /* arm926ejs CPU core */
#define CONFIG_MX25
-#define CONFIG_MX25_CLK32 32768 /* OSC32K frequency */
#define CONFIG_SYS_HZ 1000
#define CONFIG_SYS_TEXT_BASE 0xA0000000
projects / karo-tx-uboot.git / commitdiff