my @ignore = ();
my $help = 0;
my $configuration_file = ".checkpatch.conf";
+my $max_line_length = 80;
sub help {
my ($exitcode) = @_;
-f, --file treat FILE as regular source file
--subjective, --strict enable more subjective tests
--ignore TYPE(,TYPE2...) ignore various comma separated message types
+ --max-line-length=n set the maximum line length, if exceeded, warn
--show-types show the message "types" in the output
--root=PATH PATH to the kernel tree root
--no-summary suppress the per-file summary
'strict!' => \$check,
'ignore=s' => \@ignore,
'show-types!' => \$show_types,
+ 'max-line-length=i' => \$max_line_length,
'root=s' => \$root,
'summary!' => \$summary,
'mailback!' => \$mailback,
our $Member = qr{->$Ident|\.$Ident|\[[^]]*\]};
our $Lval = qr{$Ident(?:$Member)*};
-our $Constant = qr{(?:[0-9]+|0x[0-9a-fA-F]+)[UL]*};
-our $Assignment = qr{(?:\*\=|/=|%=|\+=|-=|<<=|>>=|&=|\^=|\|=|=)};
+our $Float_hex = qr{(?i)0x[0-9a-f]+p-?[0-9]+[fl]?};
+our $Float_dec = qr{(?i)(?:[0-9]+\.[0-9]*|[0-9]*\.[0-9]+)(?:e-?[0-9]+)?[fl]?};
+our $Float_int = qr{(?i)[0-9]+e-?[0-9]+[fl]?};
+our $Float = qr{$Float_hex|$Float_dec|$Float_int};
+our $Constant = qr{$Float|(?i)(?:0x[0-9a-f]+|[0-9]+)[ul]*};
+our $Assignment = qr{\*\=|/=|%=|\+=|-=|<<=|>>=|&=|\^=|\|=|=};
our $Compare = qr{<=|>=|==|!=|<|>};
our $Operators = qr{
<=|>=|==|!=|
our $Type;
our $Declare;
-our $UTF8 = qr {
- [\x09\x0A\x0D\x20-\x7E] # ASCII
- | [\xC2-\xDF][\x80-\xBF] # non-overlong 2-byte
+our $NON_ASCII_UTF8 = qr{
+ [\xC2-\xDF][\x80-\xBF] # non-overlong 2-byte
| \xE0[\xA0-\xBF][\x80-\xBF] # excluding overlongs
| [\xE1-\xEC\xEE\xEF][\x80-\xBF]{2} # straight 3-byte
| \xED[\x80-\x9F][\x80-\xBF] # excluding surrogates
| \xF4[\x80-\x8F][\x80-\xBF]{2} # plane 16
}x;
+our $UTF8 = qr{
+ [\x09\x0A\x0D\x20-\x7E] # ASCII
+ | $NON_ASCII_UTF8
+}x;
+
our $typeTypedefs = qr{(?x:
(?:__)?(?:u|s|be|le)(?:8|16|32|64)|
atomic_t
$NonptrType = qr{
(?:$Modifier\s+|const\s+)*
(?:
- (?:typeof|__typeof__)\s*\(\s*\**\s*$Ident\s*\)|
+ (?:typeof|__typeof__)\s*\([^\)]*\)|
(?:$typeTypedefs\b)|
(?:${all}\b)
)
}x;
$Type = qr{
$NonptrType
- (?:[\s\*]+\s*const|[\s\*]+|(?:\s*\[\s*\])+)?
+ (?:(?:\s|\*|\[\])+\s*const|(?:\s|\*|\[\])+|(?:\s*\[\s*\])+)?
(?:\s+$Inline|\s+$Modifier)*
}x;
$Declare = qr{(?:$Storage\s+)?$Type};
}
build_types();
-our $match_balanced_parentheses = qr/(\((?:[^\(\)]+|(-1))*\))/;
our $Typecast = qr{\s*(\(\s*$NonptrType\s*\)){0,1}\s*};
-our $LvalOrFunc = qr{($Lval)\s*($match_balanced_parentheses{0,1})\s*};
+
+# Using $balanced_parens, $LvalOrFunc, or $FuncArg
+# requires at least perl version v5.10.0
+# Any use must be runtime checked with $^V
+
+our $balanced_parens = qr/(\((?:[^\(\)]++|(?-1))*\))/;
+our $LvalOrFunc = qr{($Lval)\s*($balanced_parens{0,1})\s*};
+our $FuncArg = qr{$Typecast{0,1}($LvalOrFunc|$Constant)};
sub deparenthesize {
my ($string) = @_;
$chk_signoff = 0 if ($file);
-my @dep_includes = ();
-my @dep_functions = ();
-my $removal = "Documentation/feature-removal-schedule.txt";
-if ($tree && -f "$root/$removal") {
- open(my $REMOVE, '<', "$root/$removal") ||
- die "$P: $removal: open failed - $!\n";
- while (<$REMOVE>) {
- if (/^Check:\s+(.*\S)/) {
- for my $entry (split(/[, ]+/, $1)) {
- if ($entry =~ m@include/(.*)@) {
- push(@dep_includes, $1);
-
- } elsif ($entry !~ m@/@) {
- push(@dep_functions, $entry);
- }
- }
- }
- }
- close($REMOVE);
-}
-
my @rawlines = ();
my @lines = ();
my $vname;
}
}
return 1;
- }
+}
sub parse_email {
my ($formatted_email) = @_;
if ($off >= $len) {
last;
}
+ if ($level == 0 && substr($blk, $off) =~ /^.\s*#\s*define/) {
+ $level++;
+ $type = '#';
+ }
}
$p = $c;
$c = substr($blk, $off, 1);
last;
}
}
+ # Preprocessor commands end at the newline unless escaped.
+ if ($type eq '#' && $c eq "\n" && $p ne "\\") {
+ $level--;
+ $type = '';
+ $off++;
+ last;
+ }
$off++;
}
# We are truly at the end, so shuffle to the next line.
} elsif ($cur =~ /^(\(\s*$Type\s*)\)/ && $av_pending eq '_') {
print "CAST($1)\n" if ($dbg_values > 1);
push(@av_paren_type, $type);
- $type = 'C';
+ $type = 'c';
} elsif ($cur =~ /^($Type)\s*(?:$Ident|,|\)|\(|\s*$)/) {
print "DECLARE($1)\n" if ($dbg_values > 1);
case|
else|
asm|__asm__|
- do
+ do|
+ \#|
+ \#\#|
)(?:\s|$)|
^(?:typedef|struct|enum)\b
)}x;
}
}
+sub pos_last_openparen {
+ my ($line) = @_;
+
+ my $pos = 0;
+
+ my $opens = $line =~ tr/\(/\(/;
+ my $closes = $line =~ tr/\)/\)/;
+
+ my $last_openparen = 0;
+
+ if (($opens == 0) || ($closes >= $opens)) {
+ return -1;
+ }
+
+ my $len = length($line);
+
+ for ($pos = 0; $pos < $len; $pos++) {
+ my $string = substr($line, $pos);
+ if ($string =~ /^($FuncArg|$balanced_parens)/) {
+ $pos += length($1) - 1;
+ } elsif (substr($line, $pos, 1) eq '(') {
+ $last_openparen = $pos;
+ } elsif (index($string, '(') == -1) {
+ last;
+ }
+ }
+
+ return $last_openparen + 1;
+}
+
sub process {
my $filename = shift;
my $signoff = 0;
my $is_patch = 0;
+ my $in_header_lines = 1;
+ my $in_commit_log = 0; #Scanning lines before patch
+
+ my $non_utf8_charset = 0;
+
our @report = ();
our $cnt_lines = 0;
our $cnt_error = 0;
my %suppress_ifbraces;
my %suppress_whiletrailers;
my %suppress_export;
+ my $suppress_statement = 0;
+
+ my %camelcase = ();
# Pre-scan the patch sanitizing the lines.
# Pre-scan the patch looking for any __setup documentation.
%suppress_ifbraces = ();
%suppress_whiletrailers = ();
%suppress_export = ();
+ $suppress_statement = 0;
next;
# track the line number as we move through the hunk, note that
if ($line =~ /^diff --git.*?(\S+)$/) {
$realfile = $1;
$realfile =~ s@^([^/]*)/@@;
-
+ $in_commit_log = 0;
} elsif ($line =~ /^\+\+\+\s+(\S+)/) {
$realfile = $1;
$realfile =~ s@^([^/]*)/@@;
+ $in_commit_log = 0;
$p1_prefix = $1;
if (!$file && $tree && $p1_prefix ne '' &&
# Check the patch for a signoff:
if ($line =~ /^\s*signed-off-by:/i) {
$signoff++;
+ $in_commit_log = 0;
}
# Check signature styles
- if ($line =~ /^(\s*)($signature_tags)(\s*)(.*)/) {
+ if (!$in_header_lines &&
+ $line =~ /^(\s*)([a-z0-9_-]+by:|$signature_tags)(\s*)(.*)/i) {
my $space_before = $1;
my $sign_off = $2;
my $space_after = $3;
my $email = $4;
my $ucfirst_sign_off = ucfirst(lc($sign_off));
+ if ($sign_off !~ /$signature_tags/) {
+ WARN("BAD_SIGN_OFF",
+ "Non-standard signature: $sign_off\n" . $herecurr);
+ }
if (defined $space_before && $space_before ne "") {
WARN("BAD_SIGN_OFF",
"Do not use whitespace before $ucfirst_sign_off\n" . $herecurr);
"Invalid UTF-8, patch and commit message should be encoded in UTF-8\n" . $hereptr);
}
+# Check if it's the start of a commit log
+# (not a header line and we haven't seen the patch filename)
+ if ($in_header_lines && $realfile =~ /^$/ &&
+ $rawline !~ /^(commit\b|from\b|[\w-]+:).+$/i) {
+ $in_header_lines = 0;
+ $in_commit_log = 1;
+ }
+
+# Check if there is UTF-8 in a commit log when a mail header has explicitly
+# declined it, i.e defined some charset where it is missing.
+ if ($in_header_lines &&
+ $rawline =~ /^Content-Type:.+charset="(.+)".*$/ &&
+ $1 !~ /utf-8/i) {
+ $non_utf8_charset = 1;
+ }
+
+ if ($in_commit_log && $non_utf8_charset && $realfile =~ /^$/ &&
+ $rawline =~ /$NON_ASCII_UTF8/) {
+ WARN("UTF8_BEFORE_PATCH",
+ "8-bit UTF-8 used in possible commit log\n" . $herecurr);
+ }
+
# ignore non-hunk lines and lines being removed
next if (!$hunk_line || $line =~ /^-/);
# Only applies when adding the entry originally, after that we do not have
# sufficient context to determine whether it is indeed long enough.
if ($realfile =~ /Kconfig/ &&
- $line =~ /\+\s*(?:---)?help(?:---)?$/) {
+ $line =~ /.\s*config\s+/) {
my $length = 0;
my $cnt = $realcnt;
my $ln = $linenr + 1;
my $f;
+ my $is_start = 0;
my $is_end = 0;
- while ($cnt > 0 && defined $lines[$ln - 1]) {
+ for (; $cnt > 0 && defined $lines[$ln - 1]; $ln++) {
$f = $lines[$ln - 1];
$cnt-- if ($lines[$ln - 1] !~ /^-/);
$is_end = $lines[$ln - 1] =~ /^\+/;
- $ln++;
next if ($f =~ /^-/);
+
+ if ($lines[$ln - 1] =~ /.\s*(?:bool|tristate)\s*\"/) {
+ $is_start = 1;
+ } elsif ($lines[$ln - 1] =~ /.\s*(?:---)?help(?:---)?$/) {
+ $length = -1;
+ }
+
$f =~ s/^.//;
$f =~ s/#.*//;
$f =~ s/^\s+//;
$length++;
}
WARN("CONFIG_DESCRIPTION",
- "please write a paragraph that describes the config symbol fully\n" . $herecurr) if ($is_end && $length < 4);
- #print "is_end<$is_end> length<$length>\n";
+ "please write a paragraph that describes the config symbol fully\n" . $herecurr) if ($is_start && $is_end && $length < 4);
+ #print "is_start<$is_start> is_end<$is_end> length<$length>\n";
+ }
+
+# discourage the addition of CONFIG_EXPERIMENTAL in Kconfig.
+ if ($realfile =~ /Kconfig/ &&
+ $line =~ /.\s*depends on\s+.*\bEXPERIMENTAL\b/) {
+ WARN("CONFIG_EXPERIMENTAL",
+ "Use of CONFIG_EXPERIMENTAL is deprecated. For alternatives, see https://lkml.org/lkml/2012/10/23/580\n");
+ }
+
+ if (($realfile =~ /Makefile.*/ || $realfile =~ /Kbuild.*/) &&
+ ($line =~ /\+(EXTRA_[A-Z]+FLAGS).*/)) {
+ my $flag = $1;
+ my $replacement = {
+ 'EXTRA_AFLAGS' => 'asflags-y',
+ 'EXTRA_CFLAGS' => 'ccflags-y',
+ 'EXTRA_CPPFLAGS' => 'cppflags-y',
+ 'EXTRA_LDFLAGS' => 'ldflags-y',
+ };
+
+ WARN("DEPRECATED_VARIABLE",
+ "Use of $flag is deprecated, please use \`$replacement->{$flag} instead.\n" . $herecurr) if ($replacement->{$flag});
}
# check we are in a valid source file if not then ignore this hunk
next if ($realfile !~ /\.(h|c|s|S|pl|sh)$/);
-#80 column limit
+#line length limit
if ($line =~ /^\+/ && $prevrawline !~ /\/\*\*/ &&
$rawline !~ /^.\s*\*\s*\@$Ident\s/ &&
!($line =~ /^\+\s*$logFunctions\s*\(\s*(?:(KERN_\S+\s*|[^"]*))?"[X\t]*"\s*(?:|,|\)\s*;)\s*$/ ||
$line =~ /^\+\s*"[^"]*"\s*(?:\s*|,|\)\s*;)\s*$/) &&
- $length > 80)
+ $length > $max_line_length)
{
WARN("LONG_LINE",
- "line over 80 characters\n" . $herecurr);
+ "line over $max_line_length characters\n" . $herecurr);
+ }
+
+# Check for user-visible strings broken across lines, which breaks the ability
+# to grep for the string. Limited to strings used as parameters (those
+# following an open parenthesis), which almost completely eliminates false
+# positives, as well as warning only once per parameter rather than once per
+# line of the string. Make an exception when the previous string ends in a
+# newline (multiple lines in one string constant) or \n\t (common in inline
+# assembly to indent the instruction on the following line).
+ if ($line =~ /^\+\s*"/ &&
+ $prevline =~ /"\s*$/ &&
+ $prevline =~ /\(/ &&
+ $prevrawline !~ /\\n(?:\\t)*"\s*$/) {
+ WARN("SPLIT_STRING",
+ "quoted string split across lines\n" . $hereprev);
}
# check for spaces before a quoted newline
"please, no space before tabs\n" . $herevet);
}
+# check for && or || at the start of a line
+ if ($rawline =~ /^\+\s*(&&|\|\|)/) {
+ CHK("LOGICAL_CONTINUATIONS",
+ "Logical continuations should be on the previous line\n" . $hereprev);
+ }
+
+# check multi-line statement indentation matches previous line
+ if ($^V && $^V ge 5.10.0 &&
+ $prevline =~ /^\+(\t*)(if \(|$Ident\().*(\&\&|\|\||,)\s*$/) {
+ $prevline =~ /^\+(\t*)(.*)$/;
+ my $oldindent = $1;
+ my $rest = $2;
+
+ my $pos = pos_last_openparen($rest);
+ if ($pos >= 0) {
+ $line =~ /^(\+| )([ \t]*)/;
+ my $newindent = $2;
+
+ my $goodtabindent = $oldindent .
+ "\t" x ($pos / 8) .
+ " " x ($pos % 8);
+ my $goodspaceindent = $oldindent . " " x $pos;
+
+ if ($newindent ne $goodtabindent &&
+ $newindent ne $goodspaceindent) {
+ CHK("PARENTHESIS_ALIGNMENT",
+ "Alignment should match open parenthesis\n" . $hereprev);
+ }
+ }
+ }
+
+ if ($line =~ /^\+.*\*[ \t]*\)[ \t]+/) {
+ CHK("SPACING",
+ "No space is necessary after a cast\n" . $hereprev);
+ }
+
+ if ($realfile =~ m@^(drivers/net/|net/)@ &&
+ $rawline =~ /^\+[ \t]*\/\*[ \t]*$/ &&
+ $prevrawline =~ /^\+[ \t]*$/) {
+ WARN("NETWORKING_BLOCK_COMMENT_STYLE",
+ "networking block comments don't use an empty /* line, use /* Comment...\n" . $hereprev);
+ }
+
+ if ($realfile =~ m@^(drivers/net/|net/)@ &&
+ $rawline !~ m@^\+[ \t]*\*/[ \t]*$@ && #trailing */
+ $rawline !~ m@^\+.*/\*.*\*/[ \t]*$@ && #inline /*...*/
+ $rawline !~ m@^\+.*\*{2,}/[ \t]*$@ && #trailing **/
+ $rawline =~ m@^\+[ \t]*.+\*\/[ \t]*$@) { #non blank */
+ WARN("NETWORKING_BLOCK_COMMENT_STYLE",
+ "networking block comments put the trailing */ on a separate line\n" . $herecurr);
+ }
+
# check for spaces at the beginning of a line.
# Exceptions:
# 1) within comments
# check we are in a valid C source file if not then ignore this hunk
next if ($realfile !~ /\.(h|c)$/);
+# discourage the addition of CONFIG_EXPERIMENTAL in #if(def).
+ if ($line =~ /^\+\s*\#\s*if.*\bCONFIG_EXPERIMENTAL\b/) {
+ WARN("CONFIG_EXPERIMENTAL",
+ "Use of CONFIG_EXPERIMENTAL is deprecated. For alternatives, see https://lkml.org/lkml/2012/10/23/580\n");
+ }
+
# check for RCS/CVS revision markers
if ($rawline =~ /^\+.*\$(Revision|Log|Id)(?:\$|)/) {
WARN("CVS_KEYWORD",
"use the SSYNC() macro in asm/blackfin.h\n" . $herevet);
}
+# check for old HOTPLUG __dev<foo> section markings
+ if ($line =~ /\b(__dev(init|exit)(data|const|))\b/) {
+ WARN("HOTPLUG_SECTION",
+ "Using $1 is unnecessary\n" . $herecurr);
+ }
+
# Check for potential 'bare' types
my ($stat, $cond, $line_nr_next, $remain_next, $off_next,
$realline_next);
- if ($realcnt && $line =~ /.\s*\S/) {
+#print "LINE<$line>\n";
+ if ($linenr >= $suppress_statement &&
+ $realcnt && $line =~ /.\s*\S/) {
($stat, $cond, $line_nr_next, $remain_next, $off_next) =
ctx_statement_block($linenr, $realcnt, 0);
$stat =~ s/\n./\n /g;
$cond =~ s/\n./\n /g;
+#print "linenr<$linenr> <$stat>\n";
+ # If this statement has no statement boundaries within
+ # it there is no point in retrying a statement scan
+ # until we hit end of it.
+ my $frag = $stat; $frag =~ s/;+\s*$//;
+ if ($frag !~ /(?:{|;)/) {
+#print "skip<$line_nr_next>\n";
+ $suppress_statement = $line_nr_next;
+ }
+
# Find the real next line.
$realline_next = $line_nr_next;
if (defined $realline_next &&
my $pre_ctx = "$1$2";
my ($level, @ctx) = ctx_statement_level($linenr, $realcnt, 0);
+
+ if ($line =~ /^\+\t{6,}/) {
+ WARN("DEEP_INDENTATION",
+ "Too many leading tabs - consider code refactoring\n" . $herecurr);
+ }
+
my $ctx_cnt = $realcnt - $#ctx - 1;
my $ctx = join("\n", @ctx);
# Check relative indent for conditionals and blocks.
if ($line =~ /\b(?:(?:if|while|for)\s*\(|do\b)/ && $line !~ /^.\s*#/ && $line !~ /\}\s*while\s*/) {
+ ($stat, $cond, $line_nr_next, $remain_next, $off_next) =
+ ctx_statement_block($linenr, $realcnt, 0)
+ if (!defined $stat);
my ($s, $c) = ($stat, $cond);
substr($s, 0, length($c), '');
my $path = $1;
if ($path =~ m{//}) {
ERROR("MALFORMED_INCLUDE",
- "malformed #include filename\n" .
- $herecurr);
+ "malformed #include filename\n" . $herecurr);
+ }
+ if ($path =~ "^uapi/" && $realfile =~ m@\binclude/uapi/@) {
+ ERROR("UAPI_INCLUDE",
+ "No #include in ...include/uapi/... should use a uapi/ path prefix\n" . $herecurr);
}
}
# XXX(foo);
# EXPORT_SYMBOL(something_foo);
my $name = $1;
- if ($stat =~ /^.([A-Z_]+)\s*\(\s*($Ident)/ &&
+ if ($stat =~ /^(?:.\s*}\s*\n)?.([A-Z_]+)\s*\(\s*($Ident)/ &&
$name =~ /^${Ident}_$2/) {
#print "FOO C name<$name>\n";
$suppress_export{$realline_next} = 1;
# * goes on variable not on type
# (char*[ const])
- if ($line =~ m{\($NonptrType(\s*(?:$Modifier\b\s*|\*\s*)+)\)}) {
- my ($from, $to) = ($1, $1);
+ while ($line =~ m{(\($NonptrType(\s*(?:$Modifier\b\s*|\*\s*)+)\))}g) {
+ #print "AA<$1>\n";
+ my ($from, $to) = ($2, $2);
# Should start with a space.
$to =~ s/^(\S)/ $1/;
ERROR("POINTER_LOCATION",
"\"(foo$from)\" should be \"(foo$to)\"\n" . $herecurr);
}
- } elsif ($line =~ m{\b$NonptrType(\s*(?:$Modifier\b\s*|\*\s*)+)($Ident)}) {
- my ($from, $to, $ident) = ($1, $1, $2);
+ }
+ while ($line =~ m{(\b$NonptrType(\s*(?:$Modifier\b\s*|\*\s*)+)($Ident))}g) {
+ #print "BB<$1>\n";
+ my ($from, $to, $ident) = ($2, $2, $3);
# Should start with a space.
$to =~ s/^(\S)/ $1/;
}
}
+ if ($line =~ /\bprintk\s*\(\s*KERN_([A-Z]+)/) {
+ my $orig = $1;
+ my $level = lc($orig);
+ $level = "warn" if ($level eq "warning");
+ my $level2 = $level;
+ $level2 = "dbg" if ($level eq "debug");
+ WARN("PREFER_PR_LEVEL",
+ "Prefer netdev_$level2(netdev, ... then dev_$level2(dev, ... then pr_$level(... to printk(KERN_$orig ...\n" . $herecurr);
+ }
+
+ if ($line =~ /\bpr_warning\s*\(/) {
+ WARN("PREFER_PR_LEVEL",
+ "Prefer pr_warn(... to pr_warning(...\n" . $herecurr);
+ }
+
+ if ($line =~ /\bdev_printk\s*\(\s*KERN_([A-Z]+)/) {
+ my $orig = $1;
+ my $level = lc($orig);
+ $level = "warn" if ($level eq "warning");
+ $level = "dbg" if ($level eq "debug");
+ WARN("PREFER_DEV_LEVEL",
+ "Prefer dev_$level(... to dev_printk(KERN_$orig, ...\n" . $herecurr);
+ }
+
# function brace can't be on same line, except for #defines of do while,
# or if closed on same line
if (($line=~/$Type\s*$Ident\(.*\).*\s{/) and
my ($where, $prefix) = ($-[1], $1);
if ($prefix !~ /$Type\s+$/ &&
($where != 0 || $prefix !~ /^.\s+$/) &&
- $prefix !~ /{\s+$/) {
+ $prefix !~ /[{,]\s+$/) {
ERROR("BRACKET_SPACE",
"space prohibited before open square bracket '['\n" . $herecurr);
}
"space prohibited between function name and open parenthesis '('\n" . $herecurr);
}
}
+
+# check for whitespace before a non-naked semicolon
+ if ($line =~ /^\+.*\S\s+;/) {
+ CHK("SPACING",
+ "space prohibited before semicolon\n" . $herecurr);
+ }
+
# Check operator spacing.
if (!($line=~/\#\s*include/)) {
my $ops = qr{
# Flatten any parentheses
$value =~ s/\(/ \(/g;
$value =~ s/\)/\) /g;
- while ($value =~ s/\[[^\{\}]*\]/1/ ||
+ while ($value =~ s/\[[^\[\]]*\]/1/ ||
$value !~ /(?:$Ident|-?$Constant)\s*
$Compare\s*
(?:$Ident|-?$Constant)/x &&
}
}
-# typecasts on min/max could be min_t/max_t
- if ($line =~ /^\+(?:.*?)\b(min|max)\s*\($Typecast{0,1}($LvalOrFunc)\s*,\s*$Typecast{0,1}($LvalOrFunc)\s*\)/) {
- if (defined $2 || defined $8) {
- my $call = $1;
- my $cast1 = deparenthesize($2);
- my $arg1 = $3;
- my $cast2 = deparenthesize($8);
- my $arg2 = $9;
- my $cast;
-
- if ($cast1 ne "" && $cast2 ne "") {
- $cast = "$cast1 or $cast2";
- } elsif ($cast1 ne "") {
- $cast = $cast1;
- } else {
- $cast = $cast2;
- }
- WARN("MINMAX",
- "$call() should probably be ${call}_t($cast, $arg1, $arg2)\n" . $herecurr);
- }
- }
-
# Need a space before open parenthesis after if, while etc
if ($line=~/\b(if|while|for|switch)\(/) {
ERROR("SPACING", "space required before the open parenthesis '('\n" . $herecurr);
# Check for illegal assignment in if conditional -- and check for trailing
# statements after the conditional.
if ($line =~ /do\s*(?!{)/) {
+ ($stat, $cond, $line_nr_next, $remain_next, $off_next) =
+ ctx_statement_block($linenr, $realcnt, 0)
+ if (!defined $stat);
my ($stat_next) = ctx_statement_block($line_nr_next,
$remain_next, $off_next);
$stat_next =~ s/\n./\n /g;
}
}
-#studly caps, commented out until figure out how to distinguish between use of existing and adding new
-# if (($line=~/[\w_][a-z\d]+[A-Z]/) and !($line=~/print/)) {
-# print "No studly caps, use _\n";
-# print "$herecurr";
-# $clean = 0;
-# }
+#CamelCase
+ while ($line =~ m{($Constant|$Lval)}g) {
+ my $var = $1;
+ if ($var !~ /$Constant/ &&
+ $var =~ /[A-Z]\w*[a-z]|[a-z]\w*[A-Z]/ &&
+ $var !~ /"^(?:Clear|Set|TestClear|TestSet|)Page[A-Z]/ &&
+ !defined $camelcase{$var}) {
+ $camelcase{$var} = 1;
+ WARN("CAMELCASE",
+ "Avoid CamelCase: <$var>\n" . $herecurr);
+ }
+ }
#no spaces allowed after \ in define
if ($line=~/\#\s*define.*\\\s$/) {
my $cnt = $realcnt;
my ($off, $dstat, $dcond, $rest);
my $ctx = '';
-
- my $args = defined($1);
-
- # Find the end of the macro and limit our statement
- # search to that.
- while ($cnt > 0 && defined $lines[$ln - 1] &&
- $lines[$ln - 1] =~ /^(?:-|..*\\$)/)
- {
- $ctx .= $rawlines[$ln - 1] . "\n";
- $cnt-- if ($lines[$ln - 1] !~ /^-/);
- $ln++;
- }
- $ctx .= $rawlines[$ln - 1];
-
($dstat, $dcond, $ln, $cnt, $off) =
- ctx_statement_block($linenr, $ln - $linenr + 1, 0);
+ ctx_statement_block($linenr, $realcnt, 0);
+ $ctx = $dstat;
#print "dstat<$dstat> dcond<$dcond> cnt<$cnt> off<$off>\n";
#print "LINE<$lines[$ln-1]> len<" . length($lines[$ln-1]) . "\n";
- # Extract the remainder of the define (if any) and
- # rip off surrounding spaces, and trailing \'s.
- $rest = '';
- while ($off != 0 || ($cnt > 0 && $rest =~ /\\\s*$/)) {
- #print "ADDING cnt<$cnt> $off <" . substr($lines[$ln - 1], $off) . "> rest<$rest>\n";
- if ($off != 0 || $lines[$ln - 1] !~ /^-/) {
- $rest .= substr($lines[$ln - 1], $off) . "\n";
- $cnt--;
- }
- $ln++;
- $off = 0;
- }
- $rest =~ s/\\\n.//g;
- $rest =~ s/^\s*//s;
- $rest =~ s/\s*$//s;
-
- # Clean up the original statement.
- if ($args) {
- substr($dstat, 0, length($dcond), '');
- } else {
- $dstat =~ s/^.\s*\#\s*define\s+$Ident\s*//;
- }
+ $dstat =~ s/^.\s*\#\s*define\s+$Ident(?:\([^\)]*\))?\s*//;
$dstat =~ s/$;//g;
$dstat =~ s/\\\n.//g;
$dstat =~ s/^\s*//s;
# Flatten any parentheses and braces
while ($dstat =~ s/\([^\(\)]*\)/1/ ||
$dstat =~ s/\{[^\{\}]*\}/1/ ||
- $dstat =~ s/\[[^\{\}]*\]/1/)
+ $dstat =~ s/\[[^\[\]]*\]/1/)
+ {
+ }
+
+ # Flatten any obvious string concatentation.
+ while ($dstat =~ s/("X*")\s*$Ident/$1/ ||
+ $dstat =~ s/$Ident\s*("X*")/$1/)
{
}
my $exceptions = qr{
$Declare|
module_param_named|
- MODULE_PARAM_DESC|
+ MODULE_PARM_DESC|
DECLARE_PER_CPU|
DEFINE_PER_CPU|
__typeof__\(|
^\"|\"$
}x;
#print "REST<$rest> dstat<$dstat> ctx<$ctx>\n";
- if ($rest ne '' && $rest ne ',') {
- if ($rest !~ /while\s*\(/ &&
- $dstat !~ /$exceptions/)
- {
- ERROR("MULTISTATEMENT_MACRO_USE_DO_WHILE",
- "Macros with multiple statements should be enclosed in a do - while loop\n" . "$here\n$ctx\n");
+ if ($dstat ne '' &&
+ $dstat !~ /^(?:$Ident|-?$Constant),$/ && # 10, // foo(),
+ $dstat !~ /^(?:$Ident|-?$Constant);$/ && # foo();
+ $dstat !~ /^[!~-]?(?:$Ident|$Constant)$/ && # 10 // foo() // !foo // ~foo // -foo
+ $dstat !~ /^'X'$/ && # character constants
+ $dstat !~ /$exceptions/ &&
+ $dstat !~ /^\.$Ident\s*=/ && # .foo =
+ $dstat !~ /^do\s*$Constant\s*while\s*$Constant;?$/ && # do {...} while (...); // do {...} while (...)
+ $dstat !~ /^for\s*$Constant$/ && # for (...)
+ $dstat !~ /^for\s*$Constant\s+(?:$Ident|-?$Constant)$/ && # for (...) bar()
+ $dstat !~ /^do\s*{/ && # do {...
+ $dstat !~ /^\({/) # ({...
+ {
+ $ctx =~ s/\n*$//;
+ my $herectx = $here . "\n";
+ my $cnt = statement_rawlines($ctx);
+
+ for (my $n = 0; $n < $cnt; $n++) {
+ $herectx .= raw_line($linenr, $n) . "\n";
}
- } elsif ($ctx !~ /;/) {
- if ($dstat ne '' &&
- $dstat !~ /^(?:$Ident|-?$Constant)$/ &&
- $dstat !~ /$exceptions/ &&
- $dstat !~ /^\.$Ident\s*=/ &&
- $dstat =~ /$Operators/)
- {
+ if ($dstat =~ /;/) {
+ ERROR("MULTISTATEMENT_MACRO_USE_DO_WHILE",
+ "Macros with multiple statements should be enclosed in a do - while loop\n" . "$herectx");
+ } else {
ERROR("COMPLEX_MACRO",
- "Macros with complex values should be enclosed in parenthesis\n" . "$here\n$ctx\n");
+ "Macros with complex values should be enclosed in parenthesis\n" . "$herectx");
+ }
+ }
+
+# check for line continuations outside of #defines, preprocessor #, and asm
+
+ } else {
+ if ($prevline !~ /^..*\\$/ &&
+ $line !~ /^\+\s*\#.*\\$/ && # preprocessor
+ $line !~ /^\+.*\b(__asm__|asm)\b.*\\$/ && # asm
+ $line =~ /^\+.*\\$/) {
+ WARN("LINE_CONTINUATIONS",
+ "Avoid unnecessary line continuations\n" . $herecurr);
+ }
+ }
+
+# do {} while (0) macro tests:
+# single-statement macros do not need to be enclosed in do while (0) loop,
+# macro should not end with a semicolon
+ if ($^V && $^V ge 5.10.0 &&
+ $realfile !~ m@/vmlinux.lds.h$@ &&
+ $line =~ /^.\s*\#\s*define\s+$Ident(\()?/) {
+ my $ln = $linenr;
+ my $cnt = $realcnt;
+ my ($off, $dstat, $dcond, $rest);
+ my $ctx = '';
+ ($dstat, $dcond, $ln, $cnt, $off) =
+ ctx_statement_block($linenr, $realcnt, 0);
+ $ctx = $dstat;
+
+ $dstat =~ s/\\\n.//g;
+
+ if ($dstat =~ /^\+\s*#\s*define\s+$Ident\s*${balanced_parens}\s*do\s*{(.*)\s*}\s*while\s*\(\s*0\s*\)\s*([;\s]*)\s*$/) {
+ my $stmts = $2;
+ my $semis = $3;
+
+ $ctx =~ s/\n*$//;
+ my $cnt = statement_rawlines($ctx);
+ my $herectx = $here . "\n";
+
+ for (my $n = 0; $n < $cnt; $n++) {
+ $herectx .= raw_line($linenr, $n) . "\n";
+ }
+
+ if (($stmts =~ tr/;/;/) == 1 &&
+ $stmts !~ /^\s*(if|while|for|switch)\b/) {
+ WARN("SINGLE_STATEMENT_DO_WHILE_MACRO",
+ "Single statement macros should not use a do {} while (0) loop\n" . "$herectx");
+ }
+ if (defined $semis && $semis ne "") {
+ WARN("DO_WHILE_MACRO_WITH_TRAILING_SEMICOLON",
+ "do {} while (0) macros should not be semicolon terminated\n" . "$herectx");
}
}
}
#print "chunks<$#chunks> linenr<$linenr> endln<$endln> level<$level>\n";
#print "APW: <<$chunks[1][0]>><<$chunks[1][1]>>\n";
if ($#chunks > 0 && $level == 0) {
- my $allowed = 0;
+ my @allowed = ();
+ my $allow = 0;
my $seen = 0;
my $herectx = $here . "\n";
my $ln = $linenr - 1;
my ($whitespace) = ($cond =~ /^((?:\s*\n[+-])*\s*)/s);
my $offset = statement_rawlines($whitespace) - 1;
+ $allowed[$allow] = 0;
#print "COND<$cond> whitespace<$whitespace> offset<$offset>\n";
# We have looked at and allowed this specific line.
$seen++ if ($block =~ /^\s*{/);
- #print "cond<$cond> block<$block> allowed<$allowed>\n";
+ #print "cond<$cond> block<$block> allowed<$allowed[$allow]>\n";
if (statement_lines($cond) > 1) {
#print "APW: ALLOWED: cond<$cond>\n";
- $allowed = 1;
+ $allowed[$allow] = 1;
}
if ($block =~/\b(?:if|for|while)\b/) {
#print "APW: ALLOWED: block<$block>\n";
- $allowed = 1;
+ $allowed[$allow] = 1;
}
if (statement_block_size($block) > 1) {
#print "APW: ALLOWED: lines block<$block>\n";
- $allowed = 1;
+ $allowed[$allow] = 1;
}
+ $allow++;
}
- if ($seen && !$allowed) {
- WARN("BRACES",
- "braces {} are not necessary for any arm of this statement\n" . $herectx);
+ if ($seen) {
+ my $sum_allowed = 0;
+ foreach (@allowed) {
+ $sum_allowed += $_;
+ }
+ if ($sum_allowed == 0) {
+ WARN("BRACES",
+ "braces {} are not necessary for any arm of this statement\n" . $herectx);
+ } elsif ($sum_allowed != $allow &&
+ $seen != $allow) {
+ CHK("BRACES",
+ "braces {} should be used on all arms of this statement\n" . $herectx);
+ }
}
}
}
}
}
if ($level == 0 && $block =~ /^\s*\{/ && !$allowed) {
- my $herectx = $here . "\n";;
+ my $herectx = $here . "\n";
my $cnt = statement_rawlines($block);
for (my $n = 0; $n < $cnt; $n++) {
- $herectx .= raw_line($linenr, $n) . "\n";;
+ $herectx .= raw_line($linenr, $n) . "\n";
}
WARN("BRACES",
}
}
-# don't include deprecated include files (uses RAW line)
- for my $inc (@dep_includes) {
- if ($rawline =~ m@^.\s*\#\s*include\s*\<$inc>@) {
- ERROR("DEPRECATED_INCLUDE",
- "Don't use <$inc>: see Documentation/feature-removal-schedule.txt\n" . $herecurr);
- }
+# check for unnecessary blank lines around braces
+ if (($line =~ /^..*}\s*$/ && $prevline =~ /^.\s*$/)) {
+ CHK("BRACES",
+ "Blank lines aren't necessary before a close brace '}'\n" . $hereprev);
}
-
-# don't use deprecated functions
- for my $func (@dep_functions) {
- if ($line =~ /\b$func\b/) {
- ERROR("DEPRECATED_FUNCTION",
- "Don't use $func(): see Documentation/feature-removal-schedule.txt\n" . $herecurr);
- }
+ if (($line =~ /^.\s*$/ && $prevline =~ /^..*{\s*$/)) {
+ CHK("BRACES",
+ "Blank lines aren't necessary after an open brace '{'\n" . $hereprev);
}
# no volatiles please
$herecurr);
}
-# check for needless kfree() checks
- if ($prevline =~ /\bif\s*\(([^\)]*)\)/) {
- my $expr = $1;
- if ($line =~ /\bkfree\(\Q$expr\E\);/) {
- WARN("NEEDLESS_KFREE",
- "kfree(NULL) is safe this check is probably not required\n" . $hereprev);
- }
- }
-# check for needless usb_free_urb() checks
- if ($prevline =~ /\bif\s*\(([^\)]*)\)/) {
- my $expr = $1;
- if ($line =~ /\busb_free_urb\(\Q$expr\E\);/) {
- WARN("NEEDLESS_USB_FREE_URB",
- "usb_free_urb(NULL) is safe this check is probably not required\n" . $hereprev);
+# check for needless "if (<foo>) fn(<foo>)" uses
+ if ($prevline =~ /\bif\s*\(\s*($Lval)\s*\)/) {
+ my $expr = '\s*\(\s*' . quotemeta($1) . '\s*\)\s*;';
+ if ($line =~ /\b(kfree|usb_free_urb|debugfs_remove(?:_recursive)?)$expr/) {
+ WARN('NEEDLESS_IF',
+ "$1(NULL) is safe this check is probably not required\n" . $hereprev);
}
}
# prefer usleep_range over udelay
- if ($line =~ /\budelay\s*\(\s*(\w+)\s*\)/) {
+ if ($line =~ /\budelay\s*\(\s*(\d+)\s*\)/) {
# ignore udelay's < 10, however
- if (! (($1 =~ /(\d+)/) && ($1 < 10)) ) {
+ if (! ($1 < 10) ) {
CHK("USLEEP_RANGE",
"usleep_range is preferred over udelay; see Documentation/timers/timers-howto.txt\n" . $line);
}
"__aligned(size) is preferred over __attribute__((aligned(size)))\n" . $herecurr);
}
+# Check for __attribute__ format(printf, prefer __printf
+ if ($line =~ /\b__attribute__\s*\(\s*\(\s*format\s*\(\s*printf/) {
+ WARN("PREFER_PRINTF",
+ "__printf(string-index, first-to-check) is preferred over __attribute__((format(printf, string-index, first-to-check)))\n" . $herecurr);
+ }
+
+# Check for __attribute__ format(scanf, prefer __scanf
+ if ($line =~ /\b__attribute__\s*\(\s*\(\s*format\s*\(\s*scanf\b/) {
+ WARN("PREFER_SCANF",
+ "__scanf(string-index, first-to-check) is preferred over __attribute__((format(scanf, string-index, first-to-check)))\n" . $herecurr);
+ }
+
# check for sizeof(&)
if ($line =~ /\bsizeof\s*\(\s*\&/) {
WARN("SIZEOF_ADDRESS",
"sizeof(& should be avoided\n" . $herecurr);
}
+# check for sizeof without parenthesis
+ if ($line =~ /\bsizeof\s+((?:\*\s*|)$Lval|$Type(?:\s+$Lval|))/) {
+ WARN("SIZEOF_PARENTHESIS",
+ "sizeof $1 should be sizeof($1)\n" . $herecurr);
+ }
+
# check for line continuations in quoted strings with odd counts of "
if ($rawline =~ /\\$/ && $rawline =~ tr/"/"/ % 2) {
WARN("LINE_CONTINUATIONS",
"Avoid line continuations in quoted strings\n" . $herecurr);
}
+# check for struct spinlock declarations
+ if ($line =~ /^.\s*\bstruct\s+spinlock\s+\w+\s*;/) {
+ WARN("USE_SPINLOCK_T",
+ "struct spinlock should be spinlock_t\n" . $herecurr);
+ }
+
+# Check for misused memsets
+ if ($^V && $^V ge 5.10.0 &&
+ defined $stat &&
+ $stat =~ /^\+(?:.*?)\bmemset\s*\(\s*$FuncArg\s*,\s*$FuncArg\s*\,\s*$FuncArg\s*\)/s) {
+
+ my $ms_addr = $2;
+ my $ms_val = $7;
+ my $ms_size = $12;
+
+ if ($ms_size =~ /^(0x|)0$/i) {
+ ERROR("MEMSET",
+ "memset to 0's uses 0 as the 2nd argument, not the 3rd\n" . "$here\n$stat\n");
+ } elsif ($ms_size =~ /^(0x|)1$/i) {
+ WARN("MEMSET",
+ "single byte memset is suspicious. Swapped 2nd/3rd argument?\n" . "$here\n$stat\n");
+ }
+ }
+
+# typecasts on min/max could be min_t/max_t
+ if ($^V && $^V ge 5.10.0 &&
+ defined $stat &&
+ $stat =~ /^\+(?:.*?)\b(min|max)\s*\(\s*$FuncArg\s*,\s*$FuncArg\s*\)/) {
+ if (defined $2 || defined $7) {
+ my $call = $1;
+ my $cast1 = deparenthesize($2);
+ my $arg1 = $3;
+ my $cast2 = deparenthesize($7);
+ my $arg2 = $8;
+ my $cast;
+
+ if ($cast1 ne "" && $cast2 ne "" && $cast1 ne $cast2) {
+ $cast = "$cast1 or $cast2";
+ } elsif ($cast1 ne "") {
+ $cast = $cast1;
+ } else {
+ $cast = $cast2;
+ }
+ WARN("MINMAX",
+ "$call() should probably be ${call}_t($cast, $arg1, $arg2)\n" . "$here\n$stat\n");
+ }
+ }
+
+# check usleep_range arguments
+ if ($^V && $^V ge 5.10.0 &&
+ defined $stat &&
+ $stat =~ /^\+(?:.*?)\busleep_range\s*\(\s*($FuncArg)\s*,\s*($FuncArg)\s*\)/) {
+ my $min = $1;
+ my $max = $7;
+ if ($min eq $max) {
+ WARN("USLEEP_RANGE",
+ "usleep_range should not use min == max args; see Documentation/timers/timers-howto.txt\n" . "$here\n$stat\n");
+ } elsif ($min =~ /^\d+$/ && $max =~ /^\d+$/ &&
+ $min > $max) {
+ WARN("USLEEP_RANGE",
+ "usleep_range args reversed, use min then max; see Documentation/timers/timers-howto.txt\n" . "$here\n$stat\n");
+ }
+ }
+
# check for new externs in .c files.
if ($realfile =~ /\.c$/ && defined $stat &&
$stat =~ /^.\s*(?:extern\s+)?$Type\s+($Ident)(\s*)\(/s)
"unnecessary cast may hide bugs, see http://c-faq.com/malloc/mallocnocast.html\n" . $herecurr);
}
+# check for alloc argument mismatch
+ if ($line =~ /\b(kcalloc|kmalloc_array)\s*\(\s*sizeof\b/) {
+ WARN("ALLOC_ARRAY_ARGS",
+ "$1 uses number as first arg, sizeof is generally wrong\n" . $herecurr);
+ }
+
# check for multiple semicolons
if ($line =~ /;\s*;\s*$/) {
- WARN("ONE_SEMICOLON",
- "Statements terminations use 1 semicolon\n" . $herecurr);
+ WARN("ONE_SEMICOLON",
+ "Statements terminations use 1 semicolon\n" . $herecurr);
}
-# check for whitespace before semicolon - not allowed at end-of-line
- if ($line =~ /\s+;$/) {
- WARN("SPACEBEFORE_SEMICOLON",
- "Whitespace before semicolon\n" . $herecurr);
+# check for switch/default statements without a break;
+ if ($^V && $^V ge 5.10.0 &&
+ defined $stat &&
+ $stat =~ /^\+[$;\s]*(?:case[$;\s]+\w+[$;\s]*:[$;\s]*|)*[$;\s]*\bdefault[$;\s]*:[$;\s]*;/g) {
+ my $ctx = '';
+ my $herectx = $here . "\n";
+ my $cnt = statement_rawlines($stat);
+ for (my $n = 0; $n < $cnt; $n++) {
+ $herectx .= raw_line($linenr, $n) . "\n";
+ }
+ WARN("DEFAULT_NO_BREAK",
+ "switch default: should use break\n" . $herectx);
}
# check for gcc specific __FUNCTION__
"__func__ should be used instead of gcc specific __FUNCTION__\n" . $herecurr);
}
+# check for use of yield()
+ if ($line =~ /\byield\s*\(\s*\)/) {
+ WARN("YIELD",
+ "Using yield() is generally wrong. See yield() kernel-doc (sched/core.c)\n" . $herecurr);
+ }
+
# check for semaphores initialized locked
if ($line =~ /^.\s*sema_init.+,\W?0\W?\)/) {
WARN("CONSIDER_COMPLETION",
"consider using a completion\n" . $herecurr);
-
}
-# recommend kstrto* over simple_strto*
- if ($line =~ /\bsimple_(strto.*?)\s*\(/) {
+
+# recommend kstrto* over simple_strto* and strict_strto*
+ if ($line =~ /\b((simple|strict)_(strto(l|ll|ul|ull)))\s*\(/) {
WARN("CONSIDER_KSTRTO",
- "consider using kstrto* in preference to simple_$1\n" . $herecurr);
+ "$1 is obsolete, use k$3 instead\n" . $herecurr);
}
+
# check for __initcall(), use device_initcall() explicitly please
if ($line =~ /^.\s*__initcall\s*\(/) {
WARN("USE_DEVICE_INITCALL",
"please use device_initcall() instead of __initcall()\n" . $herecurr);
}
+
# check for various ops structs, ensure they are const.
my $struct_ops = qr{acpi_dock_ops|
address_space_operations|
WARN("EXPORTED_WORLD_WRITABLE",
"Exporting world writable files is usually an error. Consider more restrictive permissions.\n" . $herecurr);
}
-
- # Check for memset with swapped arguments
- if ($line =~ /memset.*\,(\ |)(0x|)0(\ |0|)\);/) {
- ERROR("MEMSET",
- "memset size is 3rd argument, not the second.\n" . $herecurr);
- }
}
# If we have no input at all, then there is nothing to report on
}
if ($quiet == 0) {
+
+ if ($^V lt 5.10.0) {
+ print("NOTE: perl $^V is not modern enough to detect all possible issues.\n");
+ print("An upgrade to at least perl v5.10.0 is suggested.\n\n");
+ }
+
# If there were whitespace errors which cleanpatch can fix
# then suggest that.
if ($rpt_cleaners) {
}
}
- if (keys %ignore_type) {
+ if ($quiet == 0 && keys %ignore_type) {
print "NOTE: Ignored message types:";
foreach my $ignore (sort keys %ignore_type) {
print " $ignore";
}
- print "\n";
- print "\n" if ($quiet == 0);
+ print "\n\n";
}
if ($clean == 1 && $quiet == 0) {
projects / karo-tx-uboot.git / commitdiff