arm: mx6: use fuse_read() for OCOTP fuse access

diff --git a/arch/arm/cpu/armv7/mx6/soc.c b/arch/arm/cpu/armv7/mx6/soc.c
index c45c2f9d03f09896f8a367c95c4611507eab65c8..2f30d46067fef5d0a61dc26bb0661fe3467f2bee 100644 (file)
--- a/arch/arm/cpu/armv7/mx6/soc.c
+++ b/arch/arm/cpu/armv7/mx6/soc.c
@@ -10,6 +10,7 @@
 #include <common.h>
 #include <div64.h>
 #include <ipu.h>
+#include <fuse.h>
 #include <asm/armv7.h>
 #include <asm/bootm.h>
 #include <asm/pl310.h>
@@ -129,13 +130,12 @@ u32 get_cpu_rev(void)
 
 u32 get_cpu_speed_grade_hz(void)
 {
-       struct ocotp_regs *ocotp = (struct ocotp_regs *)OCOTP_BASE_ADDR;
-       struct fuse_bank *bank = &ocotp->bank[0];
-       struct fuse_bank0_regs *fuse =
-               (struct fuse_bank0_regs *)bank->fuse_regs;
        uint32_t val;
 
-       val = readl(&fuse->cfg3);
+       if (fuse_read(0, 3, &val)) {
+               printf("Failed to read speed_grade fuse\n");
+               return 0;
+       }
        val >>= OCOTP_CFG3_SPEED_SHIFT;
        val &= 0x3;
 
@@ -168,13 +168,12 @@ u32 get_cpu_speed_grade_hz(void)
 
 u32 get_cpu_temp_grade(int *minc, int *maxc)
 {
-       struct ocotp_regs *ocotp = (struct ocotp_regs *)OCOTP_BASE_ADDR;
-       struct fuse_bank *bank = &ocotp->bank[1];
-       struct fuse_bank1_regs *fuse =
-               (struct fuse_bank1_regs *)bank->fuse_regs;
        uint32_t val;
 
-       val = readl(&fuse->mem0);
+       if (fuse_read(1, 0, &val)) {
+               printf("Failed to read temp_grade fuse\n");
+               val = 0;
+       }
        val >>= OCOTP_MEM0_TEMP_SHIFT;
        val &= 0x3;
 
@@ -394,11 +393,10 @@ int read_cpu_temperature(void)
        struct mx6_ocotp_regs *const ocotp_regs = (void *)OCOTP_BASE_ADDR;
 
        if (!thermal_calib) {
-               enable_ocotp_clk(1);
-               writel(1, &ocotp_regs->hw_ocotp_read_ctrl);
-               thermal_calib = readl(&ocotp_regs->hw_ocotp_ana1);
-               writel(0, &ocotp_regs->hw_ocotp_read_ctrl);
-               enable_ocotp_clk(0);
+               if (fuse_read(1, 6, &thermal_calib) != 0) {
+                       printf("Failed to read thermal calibration data\n");
+                       thermal_calib = ~0;
+               }
        }
 
        if (thermal_calib == 0 || thermal_calib == 0xffffffff)
@@ -667,20 +665,31 @@ void enable_caches(void)
 #if defined(CONFIG_FEC_MXC)
 void imx_get_mac_from_fuse(int dev_id, unsigned char *mac)
 {
-       struct ocotp_regs *ocotp = (struct ocotp_regs *)OCOTP_BASE_ADDR;
-       struct fuse_bank *bank = &ocotp->bank[4];
-       struct fuse_bank4_regs *fuse =
-                       (struct fuse_bank4_regs *)bank->fuse_regs;
-
-       u32 value = readl(&fuse->mac_addr_high);
-       mac[0] = (value >> 8);
-       mac[1] = value;
-
-       value = readl(&fuse->mac_addr_low);
-       mac[2] = value >> 24;
-       mac[3] = value >> 16;
-       mac[4] = value >> 8;
-       mac[5] = value;
+       unsigned int mac0, mac1;
+
+       memset(mac, 0, 6);
+       if (dev_id < 0 || dev_id > 2)
+               return;
+
+       if (fuse_read(4, 2, &mac0)) {
+               printf("Failed to read MAC0 fuse\n");
+               return;
+       }
+       if (fuse_read(4, 3, &mac1)) {
+               printf("Failed to read MAC1 fuse\n");
+               return;
+       }
+       mac[0] = mac1 >> 8;
+       mac[1] = mac1;
+       mac[2] = mac0 >> 24;
+       mac[3] = mac0 >> 16;
+       if (dev_id == 0) {
+               mac[4] = mac0 >> 8;
+               mac[5] = mac0;
+       } else {
+               mac[4] = mac1 >> 24;
+               mac[5] = mac1 >> 16;
+       }
 }
 #endif