]> git.kernelconcepts.de Git - karo-tx-uboot.git/commitdiff
* Patch by Stefan Roese, 03 May 2005:
authorstroese <stroese>
Tue, 3 May 2005 06:06:41 +0000 (06:06 +0000)
committerstroese <stroese>
Tue, 3 May 2005 06:06:41 +0000 (06:06 +0000)
  Update for P3G4
  Fix problems in cmd_universe.c

board/evb64260/pci.c
common/cmd_universe.c
include/configs/P3G4.h

index 9cd9722eec5e3d72e1f95612eb4bc5369c71fd67..59b9acb2f7d62518aa0cbd9a7db24ffa1da19407 100644 (file)
@@ -629,6 +629,7 @@ static void gt_setup_ide (struct pci_controller *hose,
        }
 }
 
+#ifndef CONFIG_P3G4
 static void gt_fixup_irq (struct pci_controller *hose, pci_dev_t dev)
 {
        unsigned char pin, irq;
@@ -642,6 +643,7 @@ static void gt_fixup_irq (struct pci_controller *hose, pci_dev_t dev)
                        pci_write_config_byte (dev, PCI_INTERRUPT_LINE, irq);
        }
 }
+#endif
 
 struct pci_config_table gt_config_table[] = {
        {PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_IDE,
@@ -651,12 +653,16 @@ struct pci_config_table gt_config_table[] = {
 };
 
 struct pci_controller pci0_hose = {
+#ifndef CONFIG_P3G4
        fixup_irq:gt_fixup_irq,
+#endif
        config_table:gt_config_table,
 };
 
 struct pci_controller pci1_hose = {
+#ifndef CONFIG_P3G4
        fixup_irq:gt_fixup_irq,
+#endif
        config_table:gt_config_table,
 };
 
@@ -692,8 +698,10 @@ void pci_init_board (void)
 
        pci_register_hose (&pci0_hose);
 
+#ifndef CONFIG_P3G4
        pciArbiterEnable (PCI_HOST0);
        pciParkingDisable (PCI_HOST0, 1, 1, 1, 1, 1, 1, 1);
+#endif
 
        command = pciReadConfigReg (PCI_HOST0, PCI_COMMAND, SELF);
        command |= PCI_COMMAND_MASTER;
@@ -735,8 +743,10 @@ void pci_init_board (void)
 
        pci_register_hose (&pci1_hose);
 
+#ifndef CONFIG_P3G4
        pciArbiterEnable (PCI_HOST1);
        pciParkingDisable (PCI_HOST1, 1, 1, 1, 1, 1, 1, 1);
+#endif
 
        command = pciReadConfigReg (PCI_HOST1, PCI_COMMAND, SELF);
        command |= PCI_COMMAND_MASTER;
index a8febff02aad29ae0ebaaf39282e609ab7faf13b..8d7b6fee125f52fbf8c9c23adbc0a0e159cd128e 100644 (file)
@@ -72,6 +72,9 @@ int universe_init(void)
        dev->busdevfn = busdevfn;
 
        pci_read_config_dword(busdevfn, PCI_BASE_ADDRESS_1, &val);
+       if (val & 1) {
+               pci_read_config_dword(busdevfn, PCI_BASE_ADDRESS_0, &val);
+       }
        val &= ~0xf;
        dev->uregs = (UNIVERSE *)val;
 
@@ -102,7 +105,13 @@ int universe_init(void)
         *   Arbitration Mode
         *   DTACK Enable
         */
-       writel(0x15060000, &dev->uregs->misc_ctl);
+       writel(0x15040000 | (readl(&dev->uregs->misc_ctl) & 0x00020000), &dev->uregs->misc_ctl);
+
+       if (readl(&dev->uregs->misc_ctl) & 0x00020000) {
+               debug ("System Controller!\n"); /* test-only */
+       } else {
+               debug ("Not System Controller!\n"); /* test-only */
+       }
 
        /*
         * Lets turn off interrupts
@@ -114,12 +123,14 @@ int universe_init(void)
        writel(0x0000, &dev->uregs->lint_map1);  /* Map all ints to 0 */
        eieio();
 
+       return 0;
+
  break_30:
        free(dev);
  break_20:
        lastError = result;
 
-       return 0;
+       return result;
 }
 
 
@@ -193,13 +204,13 @@ int universe_pci_slave_window(unsigned int pciAddr, unsigned int vmeAddr, int si
 
        switch (pms & PCI_MS_Mxx) {
        case PCI_MS_MEM:
-               ctl = 0x00000000;
+               ctl |= 0x00000000;
                break;
        case PCI_MS_IO:
-               ctl = 0x00000001;
+               ctl |= 0x00000001;
                break;
        case PCI_MS_CONFIG:
-               ctl = 0x00000002;
+               ctl |= 0x00000002;
                break;
        }
 
@@ -278,13 +289,13 @@ int universe_vme_slave_window(unsigned int vmeAddr, unsigned int pciAddr, int si
 
        switch (pms & PCI_MS_Mxx) {
        case PCI_MS_MEM:
-               ctl = 0x00000000;
+               ctl |= 0x00000000;
                break;
        case PCI_MS_IO:
-               ctl = 0x00000001;
+               ctl |= 0x00000001;
                break;
        case PCI_MS_CONFIG:
-               ctl = 0x00000002;
+               ctl |= 0x00000002;
                break;
        }
 
index c56ad11b9fe74780c8f7327a8391ee137912443a..7d6bbf51d26c7e059396fcc75601aa6b6dcef77c 100644 (file)
@@ -28,8 +28,6 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#include <asm/processor.h>
-
 #ifndef __ASSEMBLY__
 #include <galileo/core.h>
 #endif
@@ -66,7 +64,7 @@
  * mpsc channel, change CONFIG_MPSC_PORT to the desired value.
  */
 #define        CONFIG_MPSC
-#define CONFIG_MPSC_PORT       1
+#define CONFIG_MPSC_PORT       0
 
 #define CONFIG_NET_MULTI        /* attempt all available adapters */
 
 
 #undef CONFIG_ETHER_PORT_MII   /* use RMII */
 
-#if 1
+#if 0
 #define CONFIG_BOOTDELAY       -1      /* autoboot disabled            */
 #else
 #define CONFIG_BOOTDELAY       5       /* autoboot after 5 seconds     */
 #endif
 #define CONFIG_ZERO_BOOTDELAY_CHECK
 
+#define CONFIG_PREBOOT "echo;" \
+       "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
+       "echo"
+
 #undef CONFIG_BOOTARGS
-#define CONFIG_BOOTCOMMAND                                                  \
-       "bootp;"                                                     \
-       "setenv bootargs root=/dev/nfs rw nfsroot=$serverip:$rootpath " \
-       "ip=$ipaddr:$serverip:$gatewayip:" \
-       "$netmask:$hostname:eth0:none;" \
-       "bootm"
+
+#define        CONFIG_EXTRA_ENV_SETTINGS                                       \
+       "netdev=eth0\0"                                                 \
+       "hostname=p3g4\0"                                               \
+       "nfsargs=setenv bootargs root=/dev/nfs rw "                     \
+               "nfsroot=$(serverip):$(rootpath)\0"                     \
+       "ramargs=setenv bootargs root=/dev/ram rw\0"                    \
+       "addip=setenv bootargs $(bootargs) "                            \
+               "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)"      \
+               ":$(hostname):$(netdev):off panic=1\0"                  \
+       "addtty=setenv bootargs $(bootargs) console=ttyS0,$(baudrate)\0"\
+       "flash_nfs=run nfsargs addip addtty;"                           \
+               "bootm $(kernel_addr)\0"                                \
+       "flash_self=run ramargs addip addtty;"                          \
+               "bootm $(kernel_addr) $(ramdisk_addr)\0"                \
+       "net_nfs=tftp 200000 $(bootfile);run nfsargs addip addtty;"     \
+               "bootm\0"                                               \
+       "rootpath=/opt/eldk/ppc_74xx\0"                                 \
+       "bootfile=/tftpboot/p3g4/uImage\0"                              \
+       "kernel_addr=ff000000\0"                                        \
+       "ramdisk_addr=ff010000\0"                                       \
+       "load=tftp 100000 /tftpboot/p3g4/u-boot.bin\0"                  \
+       "update=protect off fff00000 fff3ffff;era fff00000 fff3ffff;"   \
+               "cp.b 100000 fff00000 $(filesize);"                     \
+               "setenv filesize;saveenv\0"                             \
+       "upd=run load;run update\0"                                     \
+       ""
+#define CONFIG_BOOTCOMMAND     "run flash_self"
 
 #define CONFIG_LOADS_ECHO      0       /* echo off for serial download */
 #define        CFG_LOADS_BAUD_CHANGE           /* allow baudrate changes       */
 
 #define        CONFIG_TIMESTAMP                /* Print image info with timestamp */
 
-#define CONFIG_COMMANDS        (CONFIG_CMD_DFL | CFG_CMD_ASKENV)
+#define CONFIG_COMMANDS              ( CONFIG_CMD_DFL  | \
+                               CFG_CMD_ASKENV  | \
+                               CFG_CMD_DHCP    | \
+                               CFG_CMD_PCI     | \
+                               CFG_CMD_ELF     | \
+                               CFG_CMD_MII     | \
+                               CFG_CMD_PING    | \
+                               CFG_CMD_UNIVERSE| \
+                               CFG_CMD_BSP     )
 
 /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
 #include <cmd_confdefs.h>
 /* PCI MEMORY MAP section */
 #define CFG_PCI0_MEM_BASE      0x80000000
 #define CFG_PCI0_MEM_SIZE      _128M
+#define CFG_PCI0_0_MEM_SPACE   (CFG_PCI0_MEM_BASE)
+
 #define CFG_PCI1_MEM_BASE      0x88000000
 #define CFG_PCI1_MEM_SIZE      _128M
-
-#define CFG_PCI0_0_MEM_SPACE   (CFG_PCI0_MEM_BASE)
 #define CFG_PCI1_0_MEM_SPACE   (CFG_PCI1_MEM_BASE)
 
-
 /* PCI I/O MAP section */
 #define CFG_PCI0_IO_BASE       0xfa000000
 #define CFG_PCI0_IO_SIZE       _16M
-#define CFG_PCI1_IO_BASE       0xfb000000
-#define CFG_PCI1_IO_SIZE       _16M
-
 #define CFG_PCI0_IO_SPACE      (CFG_PCI0_IO_BASE)
 #define CFG_PCI0_IO_SPACE_PCI  0x00000000
+
+#define CFG_PCI1_IO_BASE       0xfb000000
+#define CFG_PCI1_IO_SIZE       _16M
 #define CFG_PCI1_IO_SPACE      (CFG_PCI1_IO_BASE)
 #define CFG_PCI1_IO_SPACE_PCI  0x00000000