+commit 53cc18c71b2b920cca171874c6663e274fa80556
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Aug 10 10:38:34 2009 +0200
+
+ Minor coding style cleanup.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit d371708a1beda0f529756e614af785b30461379e
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Aug 10 09:59:10 2009 +0200
+
+ net/tftp.c: fix warning: pointer targets differ in signedness
+
+ tftp.c:294: warning: pointer targets in passing argument 1 of 'strlen'
+ differ in signedness
+
+ This was only visible for the utx8245 board which seems to have DEBUG
+ enabled.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 3ed9e943fdfe51174b23989d48563b8c1b7d2ea8
+Author: Dirk Behme <dirk.behme@googlemail.com>
+Date: Sat Aug 8 16:06:47 2009 +0200
+
+ ARM Cortex A8: Remove bogus config.mk entries
+
+ Remove bogus config.mk entry, fix newline and remove redundant
+ omap3/config.mk
+
+ Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
+
+commit cd3dcba1422d3441503251fbc69cf2437c440781
+Author: Dirk Behme <dirk.behme@googlemail.com>
+Date: Sat Aug 8 12:46:09 2009 +0200
+
+ OMAP3: Fix missing GPMC_CONFIG_CS0_BASE
+
+ Applying two indepenent OMAP3 patches resulted in missing
+ GPMC_CONFIG_CS0_BASE. Patch "omap3: embedd gpmc_cs into gpmc
+ config struct" removes GPMC_CONFIG_CS0_BASE, independent patch
+ "omap3: bug fix for NOR boot support" introduces it's usage.
+ Re-introduce GPMC_CONFIG_CS0_BASE.
+
+ Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
+
+commit ba3dbaf281130029ecb970a922551902c1d80b50
+Author: Ilya Yanok <yanok@emcraft.com>
+Date: Mon Jun 8 04:12:49 2009 +0400
+
+ mxc-mmc: sdhc host driver for MX2 and MX3 proccessor
+
+ This is a port of Linux driver for SDHC host controller hardware
+ found on Freescale's MX2 and MX3 processors. Uses new generic MMC
+ framework (CONFIG_GENERIC_MMC) and it looks like there are some
+ problems with a framework (at least on LE cpus). Some of these
+ problems are addressed in the following patches.
+
+ Signed-off-by: Ilya Yanok <yanok@emcraft.com>
+
+commit 642d7b63c343633dcafc4e23a20e32604a05ff13
+Author: Alessandro Rubini <rubini-list@gnudd.com>
+Date: Fri Aug 7 12:35:47 2009 +0200
+
+ kirkwood/gpio.h: remove duplicate definition
+
+ Signed-off-by: Alessandro Rubini <rubini@gnudd.com>
+
+commit 3ac374c0f0b7d856f1a43317a286f2079106bd6a
+Author: Albin Tonnerre <albin.tonnerre@free-electrons.com>
+Date: Fri Aug 7 12:37:36 2009 +0200
+
+ Add driver for the ST M95xxx SPI EEPROM
+
+ This chip is used in a number of boards manufactured by Calao-Systems
+ which should be supported soon. This driver provides the necessary
+ spi_read and spi_write functions necessary to communicate with the chip.
+
+ Signed-off-by: Albin Tonnerre <albin.tonnerre@free-electrons.com>
+
+commit 30951960bae9a2c33e324a7165962a082e913f9e
+Author: Prafulla Wadaskar <prafulla@marvell.com>
+Date: Fri Aug 7 22:27:32 2009 +0530
+
+ arm: Sheevaplug: Fixed NAND specific warning
+
+ It is recommended to define the macro CONFIG_SYS_64BIT_VSPRINTF
+ for NAND specific warning removal, same is done in this patch
+
+ Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
+
+commit 317734966e763fdee183898c0ed940c9bada2541
+Author: Josh Boyer <jwboyer@linux.vnet.ibm.com>
+Date: Fri Aug 7 13:53:20 2009 -0400
+
+ Dual-license IBM code contributions
+
+ It was brought to our attention that U-Boot contains code derived from the
+ IBM OpenBIOS source code originally provided with some of the older PowerPC
+ 4xx development boards. As a result, the original license of this code has
+ been carried in the various files for a number of years in the U-Boot project.
+
+ IBM is dual-licensing the IBM code contributions already present in U-Boot
+ under either the terms of the GNU General Public License version 2, or the
+ original code license already present.
+
+ Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
+
+commit cfd700be9f5ed289fd57a9bd61e266319badcb0d
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Aug 5 09:03:54 2009 -0500
+
+ fdt: Fix fdt_pci_dma_ranges handling of 64-bit ranges
+
+ If the size of a region equal to 4G it can't be represnted in a 32-bit
+ BAR so we should have marked that case as MEM64.
+
+ Additionally bump the number of inbound windows up to 4 to handle the
+ fact that Freescale PPCs that have an implicit window for CCSRBAR.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 59b4d7471c42e955bd9846892a0cc7478171778d
+Author: Wolfgang Denk <wd@denx.de>
+Date: Thu Aug 6 21:29:59 2009 +0200
+
+ ARM EABI: add new helper functions resp. function names
+
+ The ARM EABI defines new names for GCC helper functions,
+ and GCC seems to need some new functions as well.
+
+ This patch is a minimal-invasive approach to fix problems with EABI
+ conformant tool chains (to be used with "USE_PRIVATE_LIBGCC=yes").
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+ Tested-by: Dirk Behme <dirk.behme@googlemail.com>
+
+commit 197324d7d998a791e5137b8176981b4af25220ae
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Wed Aug 5 16:18:44 2009 -0500
+
+ hush: Fix bogus free() call
+
+ An off-by-one error in hush.c resulted in an unintentional free() call
+ every time a command was executed
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit ff27650bb255e2275a212357b78c3b77cbf1d2e9
+Author: Detlev Zundel <dzu@denx.de>
+Date: Wed Aug 5 18:37:45 2009 +0200
+
+ digsy_mtc: Update default environment
+
+ Signed-off-by: Detlev Zundel <dzu@denx.de>
+
+commit 0b40bd439a33bde9e3cccf1acb5744225d0c6103
+Author: Detlev Zundel <dzu@denx.de>
+Date: Wed Aug 5 18:37:44 2009 +0200
+
+ digsy_mtc: Add delay in SPI transfers to the companion controller.
+
+ While at it, remove initialization of variables which will be set
+ before usage in all cases.
+
+ Signed-off-by: Detlev Zundel <dzu@denx.de>
+
+commit 0bf00750e082a004e5fb058925622ae72890cc56
+Author: Anatolij Gustschin <agust@denx.de>
+Date: Wed Aug 5 18:37:43 2009 +0200
+
+ digsy_mtc: minor fixes for mtc command help
+
+ Add mtc state subcommand description to the
+ help of mtc command.
+
+ Remove some newlines in description of commands
+ for proper help formating.
+
+ Signed-off-by: Anatolij Gustschin <agust@denx.de>
+
+commit 5cc69084189bf49aa99d13d57515be72d1844bdf
+Author: Grzegorz Bernacki <gjb@semihalf.com>
+Date: Wed Aug 5 18:37:42 2009 +0200
+
+ digsy_mtc: Add mtc state command.
+
+ Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
+
+commit 716655288a53c95fad203ebf21d0b8ffdc2f7525
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Jul 28 22:35:39 2009 +0200
+
+ Partition support: remove newline from partition name
+
+ Remove bogus newline character that got added to the .name field of
+ the disk_partition_t structure.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 3f1649fb0dfb1e5c8890de154c332c394db5cdb5
+Author: Luigi 'Comio' Mantellini <luigi.mantellini@idf-hit.com>
+Date: Tue Jul 28 09:33:17 2009 +0200
+
+ Fix LZMA string.h header inclusion issue and remove unused variables.
+
+ Signed-off-by: Luigi 'Comio' Mantellini <luigi.mantellini@idf-hit.com>
+
+commit 1c6232f1e2eae87e0e36d489611eb6891dff21e1
+Author: Jens Scharsig <esw@bus-elektronik.de>
+Date: Mon Jul 27 15:28:42 2009 +0200
+
+ bus_vcxk.c: fix warning: unused variable 'lineptr'
+
+ Signed-off-by: Jens Scharsig <esw@bus-elektronik.de>
+
+commit 18304f7675e84252965b4e24cba279071f1da472
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Fri Jul 24 17:51:27 2009 -0400
+
+ env: kill off default_environment_size
+
+ The only environment type that uses this variable is spi flash, and that is
+ only because it is reimplementing the common set_default_env() function.
+ So fix the spi flash code and kill off the default_environment_size in the
+ process.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit bedd8403f77f790e9876578885eab1200ba2f8d8
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Thu Jul 23 16:37:48 2009 -0400
+
+ export SPI functions to standalone apps
+
+ While we're here, fix the broken #ifdef handling in _exports.h.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 3b9043a7c03290c9bdbef03848307263f5f3472c
+Author: Penda Naveen Kumar <pnaveen@ti.com>
+Date: Fri Jul 31 00:06:36 2009 +0530
+
+ omap3: bug fix for NOR boot support
+
+ This patch provides bug fix, when omap3 uses nor boot.
+
+ Signed-off-by: Penda Naveen Kumar<pnaveen@ti.com>
+ Acked-by: Dirk Behme <dirk.behme@googlemail.com>
+
+commit 61c68ae0b43bb5d6ab32958c45289aa197b1a2d1
+Author: Michael Evans <horse_dung@hotmail.com>
+Date: Mon Jul 13 20:13:45 2009 +0100
+
+ Fix examples for OMAP3 boards...
+
+ The attached patch corrects an error in the examples/Makefile which
+ causes the applications in the examples directory to hang on OMAP3
+ based boards. The current Makefile sets -Ttext during linking to
+ 0x0c100000 which is outside of addressable SDRAM memory. The script
+ corrects the existing ifeq...else...endif logic to look at the VENDOR
+ tag rather than the CPU tag.
+
+ The patch affects the following configs: omap3_beagle_config,
+ omap3_overo_config, omap3_evm_config, omap3_pandora_config,
+ omap3_zoom1_config and omap3_zoom2_config.
+
+ Signed-off-by: Michael Evans <horse_dung@hotmail.com>
+
+ Edited commit message.
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit a3d1421dfd0bb1a729e171f8a093ac837f92cec6
+Author: Dirk Behme <dirk.behme@googlemail.com>
+Date: Sat Aug 8 09:30:23 2009 +0200
+
+ omap3: use only fixed-size types inside ctrl_structs
+
+ replace variable types in ctrl_structs for omap3 by those with
+ fixed size (u8, u16, u32).
+ Additional ifndef-protection is needed by examples which do not
+ compile when including asm/types.h
+
+ Signed-off-by: Matthias Ludwig <mludwig@ultratronik.de>
+ Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
+
+commit 894113529e3a04871544dde977d6d7adee05d3bf
+Author: Dirk Behme <dirk.behme@googlemail.com>
+Date: Sat Aug 8 09:30:22 2009 +0200
+
+ omap3: replace all instances of gpmc config struct by one global
+
+ Signed-off-by: Matthias Ludwig <mludwig@ultratronik.de>
+ Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
+
+commit 97a099eaa48d5c762c4f73c52c3090c513b8b877
+Author: Dirk Behme <dirk.behme@googlemail.com>
+Date: Sat Aug 8 09:30:21 2009 +0200
+
+ omap3: remove typedefs for configuration structs
+
+ Signed-off-by: Matthias Ludwig <mludwig@ultratronik.de>
+ Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
+
+commit aa0707897c49c330b7d6b8d8362e44f60f224732
+Author: Roy Zang <tie-fei.zang@freescale.com>
+Date: Fri Jul 31 13:34:02 2009 +0800
+
+ Add Intel E1000 PCIE card support
+
+ Based on Intel PRO/1000 Network Driver 7.3.20-k2
+ Add Intel E1000 PCIE card support. The following cards are added:
+ INTEL_82571EB_COPPER
+ INTEL_82571EB_FIBER,
+ INTEL_82571EB_SERDES
+ INTEL_82571EB_QUAD_COPPER
+ INTEL_82571PT_QUAD_COPPER
+ INTEL_82571EB_QUAD_FIBER
+ INTEL_82571EB_QUAD_COPPER_LOWPROFILE
+ INTEL_82571EB_SERDES_DUAL
+ INTEL_82571EB_SERDES_QUAD
+ INTEL_82572EI_COPPER
+ INTEL_82572EI_FIBER
+ INTEL_82572EI_SERDES
+ INTEL_82572EI
+ INTEL_82573E
+ INTEL_82573E_IAMT
+ INTEL_82573L
+ INTEL_82546GB_QUAD_COPPER_KSP3
+ INTEL_80003ES2LAN_COPPER_DPT
+ INTEL_80003ES2LAN_SERDES_DPT
+ INTEL_80003ES2LAN_COPPER_SPT
+ INTEL_80003ES2LAN_SERDES_SPT
+
+ 82571EB_COPPER dual ports,
+ 82572EI single port,
+ 82572EI_COPPER single port PCIE cards
+ and
+ 82545EM_COPPER,
+ 82541GI_LF
+ pci cards are tested on both P2020 board
+ and MPC8544DS board.
+
+ Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 86848a74c3c8eb2f8dd179d039ee604dc45288cf
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Wed Jul 15 21:31:28 2009 -0400
+
+ net: sync env ethaddr to device enetaddr in eth_init()
+
+ In the previous enetaddr refactoring, the assumption with commit 56b555a644
+ was that the eth layer would handle the env -> device enetaddr syncing.
+ This was not the case as eth_initialize() is called only once and the sync
+ occurs there. So make sure the eth_init() function does the env -> device
+ sync with every network init.
+
+ Reported-by: Andrzej Wolski <awolski@poczta.fm>
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 0ebf04c607b54a352629dcf7e76b76f1785dae54
+Author: Robin Getz <rgetz@blackfin.uclinux.org>
+Date: Thu Jul 23 03:01:03 2009 -0400
+
+ minor debug cleanups in ./net
+
+ Minor ./net cleanups - no functional changes
+ - change #ifdef DEBUG printf(); #endif to just debug()
+ - changed __FUNCTION__ to __func__
+ - got rid of extra whitespace between function and opening brace
+ - removed unnecessary braces on if statements
+
+ gcc dead code elimination should make this functionally/size equivalent
+ when DEBUG is not defined. (confirmed on Blackfin, with gcc 4.3.3).
+
+ Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org>
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 187af954cf7958c24efcf0fd62289bbdb4f1f24e
+Author: Matthias Ludwig <mludwig@ultratronik.de>
+Date: Tue May 19 09:09:31 2009 +0200
+
+ omap3: embedd gpmc_cs into gpmc config struct
+
+ Embedd chip select configuration into struct for gpmc config
+ instead of having it completely separated as suggested by
+ Wolfgang Denk on
+ http://lists.denx.de/pipermail/u-boot/2009-May/052247.html
+
+ Signed-off-by: Matthias Ludwig <mludwig@ultratronik.de>
+
+commit 06bffc6ea52d4b390843d295d438b2037d12e5fd
+Author: David Brownell <david-b@pacbell.net>
+Date: Thu Jul 16 18:40:55 2009 -0700
+
+ rm9200 lowevel_init: don't touch reserved/readonly registers
+
+ For some reason the AT91rm9200 lowlevel init writes to a bunch of
+ reserved or read-only addresses. All the boards seem to define the
+ value-to-be-written values as zero ... but they shouldn't actually
+ be writing *anything* there.
+
+ No documented erratum justifies these accesses. It looks like maybe
+ some pre-release BDI-2000 setup code has been carried along by cargo
+ cult programming since at least late 2004 (per GIT history).
+
+ Here's a patch disabling what seems to be bogosity. Tested on a
+ csb337; there were no behavioral changes.
+
+ Signed-off-by: David Brownell <david-b@pacbell.net>
+
+ on RM9200ek
+ Tested-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 301b7db88fbdf7d118efb79b371b2527a2c31868
+Author: David Hunter <hunterd42@gmail.com>
+Date: Thu Jul 30 14:32:49 2009 -0700
+
+ pxa: Fix typo in GCDR(x)
+
+ Fix a typo in the GCDR(x) macro. It's a good thing no one was using it.
+
+ Signed-off-by: David Hunter <hunterd42@gmail.com>
+
+commit 3c448e648221879ae0e030e94508b4f9f63b7ab8
+Author: Eric Benard <eric@eukrea.com>
+Date: Sat Jul 18 23:45:15 2009 +0200
+
+ Add AT91SAM9260 to at91's lowlevel_init.S
+
+ Needed for AT91SAM9260 NOR Boot on Eukrea's CPU9260.
+
+ Signed-off-by: Eric Benard <eric@eukrea.com>
+
+commit 56bdfa961242fc6acaeebc800640a12b28db3899
+Author: Dirk Eibach <eibach@gdsys.de>
+Date: Thu Jul 30 09:36:33 2009 +0200
+
+ ppc4xx: Remove check for PPC460EX from CompactCenter
+
+ Signed-off-by: Dirk Eibach <eibach@gdsys.de>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit c3fa4f0c8684c862ecd3fb622fab1e17e44e82e1
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Jul 29 08:46:10 2009 +0200
+
+ ppc4xx: Add support for PPC460EX/460GT rev B chip to AMCC Canyonlands
+
+ This patch is based on a diff created by Phong Vo from AMCC.
+
+ Signed-off-by: Phong Vo <pvo@amcc.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 89bcc4875007ef6608297dc11e7a0d1fbd9900d2
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Jul 29 08:45:27 2009 +0200
+
+ ppc4xx: Add basic support for AMCC PPC460EX/460GT rev B chips
+
+ This patch is based on a diff created by Phong Vo from AMCC.
+
+ Signed-off-by: Phong Vo <pvo@amcc.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 82a7edc7ea8f5fe55fed4ff7e127469569e539c4
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Jul 28 15:12:04 2009 +0200
+
+ ppc4xx: Canyonlands-NAND-boot: Support 2 Crucial 512MByte SODIMM's
+
+ Some Canyonlands boards are equipped with different SODIMM's. This is no
+ problem with the "normal" NOR booting Canyonlands U-Boot, since it
+ automatically detects the SODIMM's via SPD data and correctly configures
+ them. But the NAND booting version is different. Here we only have 4k
+ of image size to completely setup the hardware, including DDR2 setup.
+ So we need to use a fixed DDR2 setup here. This doesn't work for different
+ SODIMM's right now.
+
+ Currently only this Crucial SODIMM is support:
+ CT6464AC667.8FB (dual ranked)
+
+ Now some boards are shipped with this SODIMM:
+ CT6464AC667.4FE (single ranked)
+
+ This patch now supports both SODIMM's by configuring first for the dual
+ ranked DIMM. A quick shows, if this module is really installed. If this test
+ fails, the DDR2 controller is re-configured for the single
+ ranked SODIMM.
+
+ Tested with those SODIMM's:
+
+ CT6464AC667.8FB (dual ranked)
+ CT6464AC667.4FE (single ranked)
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 27dd5f8e1062684f1ba685760409d9b2ab6691bf
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Jul 28 10:56:03 2009 +0200
+
+ ppc4xx: amcc: Move "kernel_addr_r" etc to higher locations (> 16MB)
+
+ This patch moves the load addresses for kernel, fdt and ramdisk to higher
+ addresses (>= 16MB). This enables booting of bigger kernel images (e.g.
+ lockdep enabled).
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 6942efc2be1b90054fa4afa5cda7023469fe08b9
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Jul 28 10:50:32 2009 +0200
+
+ ppc4xx: amcc: Set CONFIG_SYS_BOOTMAPSZ to 16MB for big kernels
+
+ This patch changes CONFIG_SYS_BOOTMAPSZ from 8MB to 16MB which is the
+ initial TLB on 40x PPC's in the Linux kernel. With this change even bigger
+ Linux kernels (> 8MB) can be booted.
+
+ This patch also sets CONFIG_SYS_BOOTM_LEN to 16MB (default 8MB) to enable
+ decompression of bigger images.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 4c2e3da82dc2b7f8b39b7f1d57f570e4bc5caa6d
+Author: Kumar Gala <kumar.gala@freescale.com>
+Date: Tue Jul 28 21:49:52 2009 -0500
+
+ Update Freescale copyrights to remove "All Rights Reserved"
+
+ "All Rights Reserved" conflicts with the GPL.
+
+ Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
+
+commit bb4291e62579dbc611e84eaaf973631e0bf129c7
+Author: Alessandro Rubini <rubini@unipv.it>
+Date: Fri Jul 24 11:27:14 2009 +0200
+
+ arm nomadik: add i2c
+
+ Signed-off-by: Alessandro Rubini <rubini@unipv.it>
+ Acked-by: Andrea Gallo <andrea.gallo@stericsson.com>
+ Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 60cbfbfd0fbebb4682f10ba96f622bfe17317598
+Author: Alessandro Rubini <rubini@unipv.it>
+Date: Fri Jul 24 11:27:03 2009 +0200
+
+ arm nomadik: add gpio support
+
+ Signed-off-by: Alessandro Rubini <rubini@unipv.it>
+ Acked-by: Andrea Gallo <andrea.gallo@stericsson.com>
+ Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 549b98306d897ae5991362d6096a36df50efe686
+Author: Tom Rix <Tom.Rix@windriver.com>
+Date: Sun Jun 28 12:52:32 2009 -0500
+
+ OMAP3 Remove twl4030 defines
+
+ These defines have been subplanted by the equivelent defines in
+ include/twl4030.h
+
+ Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
+ Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Acked-by: Heiko Schocher <hs@denx.de>
+
+commit fccc0fcaaae5154612f8259365d26d04f204859f
+Author: Tom Rix <Tom.Rix@windriver.com>
+Date: Sun Jun 28 12:52:31 2009 -0500
+
+ OMAP3 Move twl4030 mmc function
+
+ Because twl4030 now has its own device files, move and rename
+ twl4030_mmc_config.
+
+ twl4030_mmc_config initializes the twl4030 power setting to
+ the mmc device. Because it is in the twl4030 power domain, move
+ it out of drivers/mmc/omap3_mmc.c and into drivers/power/twl4030.c.
+
+ The function was renamed to twl4030_power_mmc_init because all
+ the functions in this file are to have the format
+
+ twl4030_power_<device>_<action>
+
+ In this case the suffix is mmc_init so
+ device : mmc
+ action : init
+
+ Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
+ Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Acked-by: Heiko Schocher <hs@denx.de>
+
+commit 2c15513010493435c78f83202940ac3be11de2c3
+Author: Tom Rix <Tom.Rix@windriver.com>
+Date: Sun Jun 28 12:52:30 2009 -0500
+
+ OMAP3 Move twl4030 power and led functions
+
+ Because twl4030 now has its own device files, move exiting
+ omap3 power_init_r to a new location.
+
+ power_init_r is the only function in board/omap3/common.
+ It initializes the twl4030 power for the board and enables
+ the led.
+
+ The power part of the the function is moved to twl4030_power_init in
+ drivers/power/twl4030.c The power compilation is conditional on the
+ existing config variable CONFIG_TWL4030_POWER.
+
+ The led part is moved to twl4030_led_init in the new file
+ drivers/misc/twl4030_led.c The led compilation is conditional on
+ the new config variable CONFIG_TWL4030_LED
+
+ The directory board/omap3/common was removed because power_init_r
+ was the only function in it.
+
+ Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
+ Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Acked-by: Heiko Schocher <hs@denx.de>
+
+commit 3cb7a4805fc8fb4c09e4801e1c7d531186f20190
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Jul 28 22:13:52 2009 +0200
+
+ TQM8xx* boards: set larger SMC Rx buffer len
+
+ Commit 2b3f12c2 added support for configurable SMC Rx buffer length on
+ 8xx systems. Enable this feature on TQM8xx* based boards.
+
+ This fixes the problem that pasting text in the middle of a line
+ (i. e. inserting in edit mode) did not work - only the first two
+ characters got inserted, the rest was lost.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 4b7511478b62a539e5b066d19a986b75e5d9a527
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Jul 28 22:07:37 2009 +0200
+
+ Fix ext2load return code
+
+ Make the ext2load command return 0 on success (instead of the file
+ length).
+
+ Also fix output format (get rid of random newlines) and some coding
+ style issues (long lines etc.).
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 56fdaadc124a8ef9ec0fd8ff578233ec3b1137be
+Author: Weirich, Bernhard <Bernhard.Weirich@riedel.net>
+Date: Wed Jun 10 14:00:37 2009 +0200
+
+ ext2: fix inode size and calculations
+
+ Signed-off-by: unsik Kim <donari75@gmail.com>
+ Signed-off-by: Bernhard Weirich <bernhard.weirich@riedel.net>
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+ Tested-by: Wolfgang Denk <wd@denx.de>
+
+commit cd7826359ee71e8f6f3d68331930ab9cbe1c990e
+Author: Tom Rix <Tom.Rix@windriver.com>
+Date: Sun Jun 28 12:52:29 2009 -0500
+
+ TWL4030 Add power reset button
+
+ The Zoom2 power reset button is on the top right side of the
+ main board. Press and hold for about to 8 seconds to completely
+ reset the board.
+
+ Some of the beta boards have a hardware problem that prevents
+ using this feature. If is difficult to further characterize the
+ boards that fail. So disable resetting for all beta boards.
+
+ The Zoom1 reset button is the red circle on the top right,
+ front of the board. Press and hold the button for 8 seconds to
+ completely reset the board.
+
+ After analyzing beagle, it was determined that other boards
+ that use the twl4030 for power managment can also make use
+ this function.
+
+ The resetting is done by the power management part of the twl4030.
+ Since there is no existing drivers/power, add one.
+
+ The compilation of power/twl4030.h is controlled by the config
+ variable CONFIG_TWL4030_POWER
+
+ Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
+ Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Acked-by: Heiko Schocher <hs@denx.de>
+
+commit 8966eb4c1c2d894b2a76174ba904c26c5af815b8
+Author: Tom Rix <Tom.Rix@windriver.com>
+Date: Sun Jun 28 12:52:28 2009 -0500
+
+ TWL4030 Add initial support
+
+ The TWL4030 supplies many peripherals for OMAP3 boards. These include
+ power management, usb and, keyboard.
+
+ The product description is found here:
+
+ http://focus.ti.com/docs/prod/folders/print/tps65950.html
+
+ Product reference document, tps65950.pdf, is found here:
+
+ http://www.ti.com/lit/gpn/tps65950
+
+ Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
+ Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Acked-by: Heiko Schocher <hs@denx.de>
+
+commit 7f79dfb48b7419d5caa1cf932fcff4e2fb7040af
+Author: Tom Rix <Tom.Rix@windriver.com>
+Date: Sun Jun 28 12:52:27 2009 -0500
+
+ OMAP I2C Fix the sampling clock.
+
+ This problem is seen on Zoom1 and Zoom2 in the startup and
+ when i2c probe is used
+
+ Before :
+
+ In: serial
+ Out: serial
+ Err: serial
+ timed out in wait_for_bb: I2C_STAT=1000
+ timed out in wait_for_bb: I2C_STAT=1000
+ timed out in wait_for_bb: I2C_STAT=1000
+ timed out in wait_for_pin: I2C_STAT=1000
+ I2C read: I/O error
+ timed out in wait_for_bb: I2C_STAT=1000
+ timed out in wait_for_bb: I2C_STAT=1000
+ Die ID #327c00020000000004013ddd05026013
+ Hit any key to stop autoboot: 0
+ OMAP3 Zoom1# i2c probe
+ Valid chip addresses:timed out in wait_for_bb: I2C_STAT=1000
+ 02 03 04 05 06 07 08 09 0A 0B 0C 0D <snip>
+
+ After :
+
+ In: serial
+ Out: serial
+ Err: serial
+ Die ID #327c00020000000004013ddd05026013
+ Hit any key to stop autoboot: 0
+ OMAP3 Zoom1# i2c probe
+ Valid chip addresses: 48 49 4A 4B
+
+ The addresses are for the twl4030.
+
+ The prescalar that converts the function clock to the sampling
+ clock is hardcoded to 0. The reference manual recommends 7
+ if the function clock is 96MHz.
+
+ Instead of just changing the hardcoded values, the prescalar
+ is calculated from the value I2C_IP_CLK.
+
+ The i2c #defines are in kHz. The speed passed into the
+ i2c init routine is in Hz. To be consistent, change the
+ defines to be in Hz.
+
+ The timing calculations are based on what is done in the
+ linux 2.6.30 kernel in drivers/i2c/buses/i2c_omap.c as
+ apposed to what is done in TRM.
+
+ The major variables in the timing caculations are
+ specified as #defines that can be overriden as required.
+
+ The variables and their defaults are
+
+ I2C_IP_CLK SYSTEM_CLOCK_96
+ I2C_INTERNAL_SAMPLING_CLK 19200000
+ I2C_FASTSPEED_SCLL_TRIM 6
+ I2C_FASTSPEED_SCLH_TRIM 6
+ I2C_HIGHSPEED_PHASE_ONE_SCLL_TRIM I2C_FASTSPEED_SCLL_TRIM
+ I2C_HIGHSPEED_PHASE_ONE_SCLH_TRIM I2C_FASTSPEED_SCLH_TRIM
+ I2C_HIGHSPEED_PHASE_TWO_SCLL_TRIM I2C_FASTSPEED_SCLL_TRIM
+ I2C_HIGHSPEED_PHASE_TWO_SCLH I2C_FASTSPEED_SCLH_TRIM
+
+ This was runtime verified on Zoom1, Zoom2, Beagle and Overo.
+ The 400kHz and 3.4M cases were verifed on test Zoom1,
+ Zoom2, Beagle and Overo configurations.
+
+ Testing for omap2 will be done in a second step as Nishanth
+ and Jean-Christophe commented.
+
+ Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
+ Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Acked-by: Heiko Schocher <hs@denx.de>
+
+commit 4ce5a72851ff2960543b125866c6132e0094e1ee
+Author: Heiko Schocher <hs@denx.de>
+Date: Mon Jul 20 09:59:37 2009 +0200
+
+ arm, i2c: added support for the TWSI I2C Interface
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 042d01c72e0ea95731708dd24bb8b6cf42e75c80
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Jul 27 09:13:38 2009 +0200
+
+ ppc4xx: Fix problem with NOR range assignment in Canyonlands ft_board_setup
+
+ This patch fixes the problem, that the current fdt board fixup code only
+ set's one range, the one for NOR. By this it's overwriting the already
+ correctly configured values done in __ft_board_setup(). Just remove this
+ now unneeded NOR fixup and all the ranges are correctly defined.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ Cc: Dirk Eibach <eibach@gdsys.de>
+ Cc: Felix Radensky <felix@embedded-sol.com>
+
+commit 11a1604f8d0a8d936b42f6435d004b4aa33a5d87
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Jul 27 07:42:48 2009 +0200
+
+ ppc4xx: Add some NAND-booting bootstrap entries to Kilauea chip_config cmd
+
+ This patch adds some I2C bootstrap setting for NAND booting to the Kilauea
+ chip_config command ("533-nand" and "600-nand").
+
+ Additionally some incorrectly indented lines are fixed.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 5b34691ff87821891375b28ec5bcf5154575a735
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Jul 27 07:42:37 2009 +0200
+
+ ppc4xx: Kilauea: Fix SDRAM init in NAND booting version
+
+ DDR2 Auto-calibration needs to be disabled on the NAND booting PPC4xx
+ targets. Otherwise the configured fixed init values for some DDR2
+ controller registers (e.g. RQDC) are not initialized at all resulting
+ in a non working SDRAM.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit f3ed3c9b7441cde936d06a1ff7b1490ff0d600e6
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Jul 27 10:53:43 2009 +0200
+
+ ppc4xx: Fix Arches DDR2 initialization
+
+ Testing on AMCC Arches with the latest U-Boot version yielded that DDR2
+ initialization is currently broken. U-Boot hangs upon relocation to SDRAM
+ or crashes with random traps. This patch fixes this problem. Arches now
+ uses a different WRDTR and CLKTR default setting than Canyonlands/Glacier.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit ab4c62c1ba788bf7f673a985d99a76d9c2fd7eca
+Author: Dirk Eibach <eibach@gdsys.de>
+Date: Mon Jul 27 08:49:48 2009 +0200
+
+ ppc4xx: Add GDsys CompactCenter board support.
+
+ Board support for the Guntermann & Drunck CompactCenter and
+ DevCon-Center.
+ Based on the AMCC Canyonlands board support by Stefan Roese.
+
+ Signed-off-by: Dirk Eibach <eibach@gdsys.de>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit c2e49f706ba13213f3c8da3a33e88010214e1997
+Author: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
+Date: Sat Jul 25 06:19:12 2009 +0200
+
+ mpc83xx: Add esd VME8349 board support
+
+ This patch adds support for the esd VME8349 board equipped with the
+ MPC8349. It's a VME PMC carrier board equipped with the Tundra
+ TSI148 VME-bridge.
+
+ Signed-off-by: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit fe613cdd4eb2c5b257a60d8dfb7759742318c28a
+Author: Paul Gortmaker <paul.gortmaker@windriver.com>
+Date: Thu Jul 23 17:10:55 2009 -0400
+
+ sbc8349: combine HRCW flash and u-boot image flash
+
+ Up to this point in time, the sbc8349 board was storing the u-boot
+ image in flash 2x. One for the HRCW value at the beginning of
+ flash (0xff80_0000), and once close to the end of flash (0xfff8_0000)
+ for the actual image that got executed.
+
+ This moves the TEXT_BASE to be the beginning of flash, which makes
+ the second copy of the image redundant, and frees up the flash
+ from the end of the environment storage to the end of the flash
+ device itself.
+
+ Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit be9b56df02168ca97562d6b9ec791136e4cd925a
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Thu Jul 23 14:09:38 2009 -0500
+
+ mpc83xx: CONFIG_83XX_GENERIC_PCI is now synonymous with CONFIG_PCI; remove the former
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 94978e19f31d225b4f7d97c4acbac1ecfaeb8f69
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Jul 27 10:37:37 2009 +0200
+
+ Prepare 2009.08-rc1 (again, after fixing last minute issues).
+
+ Update CHANGELOG
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
commit 9689ddcca6e01f3637b4442fa8575f29ef4d7aa3
Author: Wolfgang Denk <wd@denx.de>
Date: Mon Jul 27 10:06:39 2009 +0200
Cc: Ron Madrid <ron_madrid@sbcglobal.net>
Cc: Anton Vorontsov <avorontsov@ru.mvista.com>
+commit 052c08916532d1d9c2f69eb9229709c7b2fc1f02
+Author: TsiChung Liew <tsicliew@gmail.com>
+Date: Wed Jul 8 07:41:24 2009 +0000
+
+ ColdFire: Update bootargs
+
+ Add a bootargs for M53017EVB and update bootargs
+ for M54451EVB
+
+ Signed-off-by: TsiChung Liew <tsicliew@gmail.com>
+
+commit 6e8d58d36691520f8da74cd948661d28d5a5dc66
+Author: TsiChung Liew <tsicliew@gmail.com>
+Date: Tue Jun 30 14:30:19 2009 +0000
+
+ Command for accessing serial flash update
+
+ Change strtoul number base of argv 3 from 0 to 16
+
+ Signed-off-by: TsiChung Liew <tsicliew@gmail.com>
+
+commit ee0a8462466dd284968536eb57c6eef4be0d6aad
+Author: TsiChung Liew <tsicliew@gmail.com>
+Date: Tue Jun 30 14:18:29 2009 +0000
+
+ ColdFire: Add DSPI support for MCF5227x and MCF5445x
+
+ Remove individual CPU specific DSPI driver.
+ Add required feature for the common DSPI driver in cpu_init and
+ in platform configuration file.
+
+ Signed-off-by: TsiChung Liew <tsicliew@gmail.com>
+
+commit dec61c7851baa72151ef1d3657e7bb3b68907d48
+Author: TsiChung Liew <tsicliew@gmail.com>
+Date: Tue Jun 30 14:09:47 2009 +0000
+
+ Coldfire: Consolidate DSPI driver
+
+ Unify both MCF5227x and MCF5445x DSPI driver in CPU to
+ driver/spi folder for common use.
+
+ Signed-off-by: TsiChung Liew <tsicliew@gmail.com>
+
+commit 11d88b26a68bd4bf98b1c962fde6257a50978231
+Author: TsiChung Liew <tsicliew@gmail.com>
+Date: Fri Jun 12 13:03:34 2009 +0000
+
+ ColdFire: Remove compiler warning messages
+
+ Remove unused variables and printf type mismatch in
+ lib_m68k/board.c
+
+ Signed-off-by: TsiChung Liew <tsicliew@gmail.com>
+
+commit 4567c7bff2503fb1a7c738ff9b9f0bd00d274d9a
+Author: TsiChung Liew <tsicliew@gmail.com>
+Date: Fri Jun 12 11:31:31 2009 +0000
+
+ ColdFire: Fix M53017EVB flash size
+
+ Increase the flash size from 8MB to 16MB
+
+ Signed-off-by: TsiChung Liew <tsicliew@gmail.com>
+
+commit bf9a521529e484b15e8fdb583a607cf7945d2f6b
+Author: TsiChung Liew <tsicliew@gmail.com>
+Date: Fri Jun 12 11:29:00 2009 +0000
+
+ ColdFire: Add M5208EVB and MCF520x CPU support
+
+ Signed-off-by: TsiChung Liew <tsicliew@gmail.com>
+
+commit 709b384b6493d9726dce20663ebe31bf7cab2925
+Author: TsiChung Liew <tsicliew@gmail.com>
+Date: Thu Jun 11 15:39:57 2009 +0000
+
+ ColdFire: Update for M54451EVB
+
+ Update serial boot DRAM's Internal RAM, vector table and DRAM in
+ start.S, serial flash's read status command over SPI and NOR
+ flash.
+
+ Signed-off-by: TsiChung Liew <tsicliew@gmail.com>
+
+commit bbf6bbffcaf694c03504c661e58fbd1aefe5bf64
+Author: TsiChung Liew <tsicliew@gmail.com>
+Date: Thu Jun 11 12:50:05 2009 +0000
+
+ ColdFire: Update configuration file to use flash buffer write
+
+ Update M52277EVB, M53017EVB and M54455EVB platform configuration
+ file to use flash buffer write
+
+ Signed-off-by: TsiChung Liew <tsicliew@gmail.com>
+
commit 7d4450a9773673052fcd7fdf0a4a88c089126ac1
Author: Wolfgang Denk <wd@denx.de>
Date: Sun Jun 14 20:58:53 2009 +0200
projects / karo-tx-uboot.git / commitdiff