--- /dev/null
+/*
+ * Copyright (C) 2014 Gateworks Corporation
+ * Author: Tim Harvey <tharvey@gateworks.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <linux/types.h>
+#include <asm/arch/mx6-ddr.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/io.h>
+#include <asm/types.h>
+
+#if defined(CONFIG_MX6QDL) || defined(CONFIG_MX6Q) || defined(CONFIG_MX6D)
+/* Configure MX6DQ mmdc iomux */
+void mx6dq_dram_iocfg(unsigned width,
+ const struct mx6dq_iomux_ddr_regs *ddr,
+ const struct mx6dq_iomux_grp_regs *grp)
+{
+ volatile struct mx6dq_iomux_ddr_regs *mx6_ddr_iomux;
+ volatile struct mx6dq_iomux_grp_regs *mx6_grp_iomux;
+
+ mx6_ddr_iomux = (struct mx6dq_iomux_ddr_regs *)MX6DQ_IOM_DDR_BASE;
+ mx6_grp_iomux = (struct mx6dq_iomux_grp_regs *)MX6DQ_IOM_GRP_BASE;
+
+ /* DDR IO Type */
+ mx6_grp_iomux->grp_ddr_type = grp->grp_ddr_type;
+ mx6_grp_iomux->grp_ddrpke = grp->grp_ddrpke;
+
+ /* Clock */
+ mx6_ddr_iomux->dram_sdclk_0 = ddr->dram_sdclk_0;
+ mx6_ddr_iomux->dram_sdclk_1 = ddr->dram_sdclk_1;
+
+ /* Address */
+ mx6_ddr_iomux->dram_cas = ddr->dram_cas;
+ mx6_ddr_iomux->dram_ras = ddr->dram_ras;
+ mx6_grp_iomux->grp_addds = grp->grp_addds;
+
+ /* Control */
+ mx6_ddr_iomux->dram_reset = ddr->dram_reset;
+ mx6_ddr_iomux->dram_sdcke0 = ddr->dram_sdcke0;
+ mx6_ddr_iomux->dram_sdcke1 = ddr->dram_sdcke1;
+ mx6_ddr_iomux->dram_sdba2 = ddr->dram_sdba2;
+ mx6_ddr_iomux->dram_sdodt0 = ddr->dram_sdodt0;
+ mx6_ddr_iomux->dram_sdodt1 = ddr->dram_sdodt1;
+ mx6_grp_iomux->grp_ctlds = grp->grp_ctlds;
+
+ /* Data Strobes */
+ mx6_grp_iomux->grp_ddrmode_ctl = grp->grp_ddrmode_ctl;
+ mx6_ddr_iomux->dram_sdqs0 = ddr->dram_sdqs0;
+ mx6_ddr_iomux->dram_sdqs1 = ddr->dram_sdqs1;
+ if (width >= 32) {
+ mx6_ddr_iomux->dram_sdqs2 = ddr->dram_sdqs2;
+ mx6_ddr_iomux->dram_sdqs3 = ddr->dram_sdqs3;
+ }
+ if (width >= 64) {
+ mx6_ddr_iomux->dram_sdqs4 = ddr->dram_sdqs4;
+ mx6_ddr_iomux->dram_sdqs5 = ddr->dram_sdqs5;
+ mx6_ddr_iomux->dram_sdqs6 = ddr->dram_sdqs6;
+ mx6_ddr_iomux->dram_sdqs7 = ddr->dram_sdqs7;
+ }
+
+ /* Data */
+ mx6_grp_iomux->grp_ddrmode = grp->grp_ddrmode;
+ mx6_grp_iomux->grp_b0ds = grp->grp_b0ds;
+ mx6_grp_iomux->grp_b1ds = grp->grp_b1ds;
+ if (width >= 32) {
+ mx6_grp_iomux->grp_b2ds = grp->grp_b2ds;
+ mx6_grp_iomux->grp_b3ds = grp->grp_b3ds;
+ }
+ if (width >= 64) {
+ mx6_grp_iomux->grp_b4ds = grp->grp_b4ds;
+ mx6_grp_iomux->grp_b5ds = grp->grp_b5ds;
+ mx6_grp_iomux->grp_b6ds = grp->grp_b6ds;
+ mx6_grp_iomux->grp_b7ds = grp->grp_b7ds;
+ }
+ mx6_ddr_iomux->dram_dqm0 = ddr->dram_dqm0;
+ mx6_ddr_iomux->dram_dqm1 = ddr->dram_dqm1;
+ if (width >= 32) {
+ mx6_ddr_iomux->dram_dqm2 = ddr->dram_dqm2;
+ mx6_ddr_iomux->dram_dqm3 = ddr->dram_dqm3;
+ }
+ if (width >= 64) {
+ mx6_ddr_iomux->dram_dqm4 = ddr->dram_dqm4;
+ mx6_ddr_iomux->dram_dqm5 = ddr->dram_dqm5;
+ mx6_ddr_iomux->dram_dqm6 = ddr->dram_dqm6;
+ mx6_ddr_iomux->dram_dqm7 = ddr->dram_dqm7;
+ }
+}
+#endif
+
+#if defined(CONFIG_MX6QDL) || defined(CONFIG_MX6DL) || defined(CONFIG_MX6S)
+/* Configure MX6SDL mmdc iomux */
+void mx6sdl_dram_iocfg(unsigned width,
+ const struct mx6sdl_iomux_ddr_regs *ddr,
+ const struct mx6sdl_iomux_grp_regs *grp)
+{
+ volatile struct mx6sdl_iomux_ddr_regs *mx6_ddr_iomux;
+ volatile struct mx6sdl_iomux_grp_regs *mx6_grp_iomux;
+
+ mx6_ddr_iomux = (struct mx6sdl_iomux_ddr_regs *)MX6SDL_IOM_DDR_BASE;
+ mx6_grp_iomux = (struct mx6sdl_iomux_grp_regs *)MX6SDL_IOM_GRP_BASE;
+
+ /* DDR IO Type */
+ mx6_grp_iomux->grp_ddr_type = grp->grp_ddr_type;
+ mx6_grp_iomux->grp_ddrpke = grp->grp_ddrpke;
+
+ /* Clock */
+ mx6_ddr_iomux->dram_sdclk_0 = ddr->dram_sdclk_0;
+ mx6_ddr_iomux->dram_sdclk_1 = ddr->dram_sdclk_1;
+
+ /* Address */
+ mx6_ddr_iomux->dram_cas = ddr->dram_cas;
+ mx6_ddr_iomux->dram_ras = ddr->dram_ras;
+ mx6_grp_iomux->grp_addds = grp->grp_addds;
+
+ /* Control */
+ mx6_ddr_iomux->dram_reset = ddr->dram_reset;
+ mx6_ddr_iomux->dram_sdcke0 = ddr->dram_sdcke0;
+ mx6_ddr_iomux->dram_sdcke1 = ddr->dram_sdcke1;
+ mx6_ddr_iomux->dram_sdba2 = ddr->dram_sdba2;
+ mx6_ddr_iomux->dram_sdodt0 = ddr->dram_sdodt0;
+ mx6_ddr_iomux->dram_sdodt1 = ddr->dram_sdodt1;
+ mx6_grp_iomux->grp_ctlds = grp->grp_ctlds;
+
+ /* Data Strobes */
+ mx6_grp_iomux->grp_ddrmode_ctl = grp->grp_ddrmode_ctl;
+ mx6_ddr_iomux->dram_sdqs0 = ddr->dram_sdqs0;
+ mx6_ddr_iomux->dram_sdqs1 = ddr->dram_sdqs1;
+ if (width >= 32) {
+ mx6_ddr_iomux->dram_sdqs2 = ddr->dram_sdqs2;
+ mx6_ddr_iomux->dram_sdqs3 = ddr->dram_sdqs3;
+ }
+ if (width >= 64) {
+ mx6_ddr_iomux->dram_sdqs4 = ddr->dram_sdqs4;
+ mx6_ddr_iomux->dram_sdqs5 = ddr->dram_sdqs5;
+ mx6_ddr_iomux->dram_sdqs6 = ddr->dram_sdqs6;
+ mx6_ddr_iomux->dram_sdqs7 = ddr->dram_sdqs7;
+ }
+
+ /* Data */
+ mx6_grp_iomux->grp_ddrmode = grp->grp_ddrmode;
+ mx6_grp_iomux->grp_b0ds = grp->grp_b0ds;
+ mx6_grp_iomux->grp_b1ds = grp->grp_b1ds;
+ if (width >= 32) {
+ mx6_grp_iomux->grp_b2ds = grp->grp_b2ds;
+ mx6_grp_iomux->grp_b3ds = grp->grp_b3ds;
+ }
+ if (width >= 64) {
+ mx6_grp_iomux->grp_b4ds = grp->grp_b4ds;
+ mx6_grp_iomux->grp_b5ds = grp->grp_b5ds;
+ mx6_grp_iomux->grp_b6ds = grp->grp_b6ds;
+ mx6_grp_iomux->grp_b7ds = grp->grp_b7ds;
+ }
+ mx6_ddr_iomux->dram_dqm0 = ddr->dram_dqm0;
+ mx6_ddr_iomux->dram_dqm1 = ddr->dram_dqm1;
+ if (width >= 32) {
+ mx6_ddr_iomux->dram_dqm2 = ddr->dram_dqm2;
+ mx6_ddr_iomux->dram_dqm3 = ddr->dram_dqm3;
+ }
+ if (width >= 64) {
+ mx6_ddr_iomux->dram_dqm4 = ddr->dram_dqm4;
+ mx6_ddr_iomux->dram_dqm5 = ddr->dram_dqm5;
+ mx6_ddr_iomux->dram_dqm6 = ddr->dram_dqm6;
+ mx6_ddr_iomux->dram_dqm7 = ddr->dram_dqm7;
+ }
+}
+#endif
+
+/*
+ * Configure mx6 mmdc registers based on:
+ * - board-specific memory configuration
+ * - board-specific calibration data
+ * - ddr3 chip details
+ *
+ * The various calculations here are derived from the Freescale
+ * i.Mx6DQSDL DDR3 Script Aid spreadsheet (DOC-94917) designed to generate MMDC
+ * configuration registers based on memory system and memory chip parameters.
+ *
+ * The defaults here are those which were specified in the spreadsheet.
+ * For details on each register, refer to the IMX6DQRM and/or IMX6SDLRM
+ * section titled MMDC initialization
+ */
+#define MR(val, ba, cmd, cs1) \
+ ((val << 16) | (1 << 15) | (cmd << 4) | (cs1 << 3) | ba)
+void mx6_dram_cfg(const struct mx6_ddr_sysinfo *i,
+ const struct mx6_mmdc_calibration *c,
+ const struct mx6_ddr3_cfg *m)
+{
+ volatile struct mmdc_p_regs *mmdc0;
+ volatile struct mmdc_p_regs *mmdc1;
+ u32 reg;
+ u8 tcke, tcksrx, tcksre, txpdll, taofpd, taonpd, trrd;
+ u8 todtlon, taxpd, tanpd, tcwl, txp, tfaw, tcl;
+ u8 todt_idle_off = 0x4; /* from DDR3 Script Aid spreadsheet */
+ u16 trcd, trc, tras, twr, tmrd, trtp, trp, twtr, trfc, txs, txpr;
+ u16 CS0_END;
+ u16 tdllk = 0x1ff; /* DLL locking time: 512 cycles (JEDEC DDR3) */
+ int clkper; /* clock period in picoseconds */
+ int clock; /* clock freq in mHz */
+ int cs;
+
+ mmdc0 = (struct mmdc_p_regs *)MMDC_P0_BASE_ADDR;
+ mmdc1 = (struct mmdc_p_regs *)MMDC_P1_BASE_ADDR;
+
+ /* MX6D/MX6Q: 1066 MHz memory clock, clkper = 1.894ns = 1894ps */
+ if (is_cpu_type(MXC_CPU_MX6Q) || is_cpu_type(MXC_CPU_MX6D)) {
+ clock = 528;
+ tcwl = 4;
+ }
+ /* MX6S/MX6DL: 800 MHz memory clock, clkper = 2.5ns = 2500ps */
+ else {
+ clock = 400;
+ tcwl = 3;
+ }
+ clkper = (1000*1000)/clock; /* ps */
+ todtlon = tcwl;
+ taxpd = tcwl;
+ tanpd = tcwl;
+ tcwl = tcwl;
+
+ switch (m->density) {
+ case 1: /* 1Gb per chip */
+ trfc = DIV_ROUND_UP(110000, clkper) - 1;
+ txs = DIV_ROUND_UP(120000, clkper) - 1;
+ break;
+ case 2: /* 2Gb per chip */
+ trfc = DIV_ROUND_UP(160000, clkper) - 1;
+ txs = DIV_ROUND_UP(170000, clkper) - 1;
+ break;
+ case 4: /* 4Gb per chip */
+ trfc = DIV_ROUND_UP(260000, clkper) - 1;
+ txs = DIV_ROUND_UP(270000, clkper) - 1;
+ break;
+ case 8: /* 8Gb per chip */
+ trfc = DIV_ROUND_UP(350000, clkper) - 1;
+ txs = DIV_ROUND_UP(360000, clkper) - 1;
+ break;
+ default:
+ /* invalid density */
+ printf("invalid chip density\n");
+ hang();
+ break;
+ }
+ txpr = txs;
+
+ switch (m->mem_speed) {
+ case 800:
+ txp = DIV_ROUND_UP(MAX(3*clkper, 7500), clkper) - 1;
+ tcke = DIV_ROUND_UP(MAX(3*clkper, 7500), clkper) - 1;
+ if (m->pagesz == 1) {
+ tfaw = DIV_ROUND_UP(40000, clkper) - 1;
+ trrd = DIV_ROUND_UP(MAX(4*clkper, 10000), clkper) - 1;
+ } else {
+ tfaw = DIV_ROUND_UP(50000, clkper) - 1;
+ trrd = DIV_ROUND_UP(MAX(4*clkper, 10000), clkper) - 1;
+ }
+ break;
+ case 1066:
+ txp = DIV_ROUND_UP(MAX(3*clkper, 7500), clkper) - 1;
+ tcke = DIV_ROUND_UP(MAX(3*clkper, 5625), clkper) - 1;
+ if (m->pagesz == 1) {
+ tfaw = DIV_ROUND_UP(37500, clkper) - 1;
+ trrd = DIV_ROUND_UP(MAX(4*clkper, 7500), clkper) - 1;
+ } else {
+ tfaw = DIV_ROUND_UP(50000, clkper) - 1;
+ trrd = DIV_ROUND_UP(MAX(4*clkper, 10000), clkper) - 1;
+ }
+ break;
+ case 1333:
+ txp = DIV_ROUND_UP(MAX(3*clkper, 6000), clkper) - 1;
+ tcke = DIV_ROUND_UP(MAX(3*clkper, 5625), clkper) - 1;
+ if (m->pagesz == 1) {
+ tfaw = DIV_ROUND_UP(30000, clkper) - 1;
+ trrd = DIV_ROUND_UP(MAX(4*clkper, 6000), clkper) - 1;
+ } else {
+ tfaw = DIV_ROUND_UP(45000, clkper) - 1;
+ trrd = DIV_ROUND_UP(MAX(4*clkper, 7500), clkper) - 1;
+ }
+ break;
+ case 1600:
+ txp = DIV_ROUND_UP(MAX(3*clkper, 6000), clkper) - 1;
+ tcke = DIV_ROUND_UP(MAX(3*clkper, 5000), clkper) - 1;
+ if (m->pagesz == 1) {
+ tfaw = DIV_ROUND_UP(30000, clkper) - 1;
+ trrd = DIV_ROUND_UP(MAX(4*clkper, 6000), clkper) - 1;
+ } else {
+ tfaw = DIV_ROUND_UP(40000, clkper) - 1;
+ trrd = DIV_ROUND_UP(MAX(4*clkper, 7500), clkper) - 1;
+ }
+ break;
+ default:
+ printf("invalid memory speed\n");
+ hang();
+ break;
+ }
+ txpdll = DIV_ROUND_UP(MAX(10*clkper, 24000), clkper) - 1;
+ tcl = DIV_ROUND_UP(m->trcd, clkper/10) - 3;
+ tcksre = DIV_ROUND_UP(MAX(5*clkper, 10000), clkper);
+ tcksrx = tcksre;
+ taonpd = DIV_ROUND_UP(2000, clkper) - 1;
+ taofpd = taonpd;
+ trp = DIV_ROUND_UP(m->trcd, clkper/10) - 1;
+ trcd = trp;
+ trc = DIV_ROUND_UP(m->trcmin, clkper/10) - 1;
+ tras = DIV_ROUND_UP(m->trasmin, clkper/10) - 1;
+ twr = DIV_ROUND_UP(15000, clkper) - 1;
+ tmrd = DIV_ROUND_UP(MAX(12*clkper, 15000), clkper) - 1;
+ twtr = ROUND(MAX(4*clkper, 7500)/clkper, 1) - 1;
+ trtp = twtr;
+ CS0_END = ((4*i->cs_density) <= 120) ? (4*i->cs_density)+7 : 127;
+ debug("density:%d Gb (%d Gb per chip)\n", i->cs_density, m->density);
+ debug("clock: %dMHz (%d ps)\n", clock, clkper);
+ debug("memspd:%d\n", m->mem_speed);
+ debug("tcke=%d\n", tcke);
+ debug("tcksrx=%d\n", tcksrx);
+ debug("tcksre=%d\n", tcksre);
+ debug("taofpd=%d\n", taofpd);
+ debug("taonpd=%d\n", taonpd);
+ debug("todtlon=%d\n", todtlon);
+ debug("tanpd=%d\n", tanpd);
+ debug("taxpd=%d\n", taxpd);
+ debug("trfc=%d\n", trfc);
+ debug("txs=%d\n", txs);
+ debug("txp=%d\n", txp);
+ debug("txpdll=%d\n", txpdll);
+ debug("tfaw=%d\n", tfaw);
+ debug("tcl=%d\n", tcl);
+ debug("trcd=%d\n", trcd);
+ debug("trp=%d\n", trp);
+ debug("trc=%d\n", trc);
+ debug("tras=%d\n", tras);
+ debug("twr=%d\n", twr);
+ debug("tmrd=%d\n", tmrd);
+ debug("tcwl=%d\n", tcwl);
+ debug("tdllk=%d\n", tdllk);
+ debug("trtp=%d\n", trtp);
+ debug("twtr=%d\n", twtr);
+ debug("trrd=%d\n", trrd);
+ debug("txpr=%d\n", txpr);
+ debug("CS0_END=%d\n", CS0_END);
+ debug("ncs=%d\n", i->ncs);
+ debug("Rtt_wr=%d\n", i->rtt_wr);
+ debug("Rtt_nom=%d\n", i->rtt_nom);
+ debug("SRT=%d\n", m->SRT);
+ debug("tcl=%d\n", tcl);
+ debug("twr=%d\n", twr);
+
+ /*
+ * board-specific configuration:
+ * These values are determined empirically and vary per board layout
+ * see:
+ * appnote, ddr3 spreadsheet
+ */
+ mmdc0->mpwldectrl0 = c->p0_mpwldectrl0;
+ mmdc0->mpwldectrl1 = c->p0_mpwldectrl1;
+ mmdc0->mpdgctrl0 = c->p0_mpdgctrl0;
+ mmdc0->mpdgctrl1 = c->p0_mpdgctrl1;
+ mmdc0->mprddlctl = c->p0_mprddlctl;
+ mmdc0->mpwrdlctl = c->p0_mpwrdlctl;
+ if (i->dsize > 1) {
+ mmdc1->mpwldectrl0 = c->p1_mpwldectrl0;
+ mmdc1->mpwldectrl1 = c->p1_mpwldectrl1;
+ mmdc1->mpdgctrl0 = c->p1_mpdgctrl0;
+ mmdc1->mpdgctrl1 = c->p1_mpdgctrl1;
+ mmdc1->mprddlctl = c->p1_mprddlctl;
+ mmdc1->mpwrdlctl = c->p1_mpwrdlctl;
+ }
+
+ /* Read data DQ Byte0-3 delay */
+ mmdc0->mprddqby0dl = (u32)0x33333333;
+ mmdc0->mprddqby1dl = (u32)0x33333333;
+ if (i->dsize > 0) {
+ mmdc0->mprddqby2dl = (u32)0x33333333;
+ mmdc0->mprddqby3dl = (u32)0x33333333;
+ }
+ if (i->dsize > 1) {
+ mmdc1->mprddqby0dl = (u32)0x33333333;
+ mmdc1->mprddqby1dl = (u32)0x33333333;
+ mmdc1->mprddqby2dl = (u32)0x33333333;
+ mmdc1->mprddqby3dl = (u32)0x33333333;
+ }
+
+ /* MMDC Termination: rtt_nom:2 RZQ/2(120ohm), rtt_nom:1 RZQ/4(60ohm) */
+ reg = (i->rtt_nom == 2) ? 0x00011117 : 0x00022227;
+ mmdc0->mpodtctrl = reg;
+ if (i->dsize > 1)
+ mmdc1->mpodtctrl = reg;
+
+ /* complete calibration */
+ reg = (1 << 11); /* Force measurement on delay-lines */
+ mmdc0->mpmur0 = reg;
+ if (i->dsize > 1)
+ mmdc1->mpmur0 = reg;
+
+ /* Step 1: configuration request */
+ mmdc0->mdscr = (u32)(1 << 15); /* config request */
+
+ /* Step 2: Timing configuration */
+ reg = (trfc << 24) | (txs << 16) | (txp << 13) | (txpdll << 9) |
+ (tfaw << 4) | tcl;
+ mmdc0->mdcfg0 = reg;
+ reg = (trcd << 29) | (trp << 26) | (trc << 21) | (tras << 16) |
+ (1 << 15) | /* trpa */
+ (twr << 9) | (tmrd << 5) | tcwl;
+ mmdc0->mdcfg1 = reg;
+ reg = (tdllk << 16) | (trtp << 6) | (twtr << 3) | trrd;
+ mmdc0->mdcfg2 = reg;
+ reg = (taofpd << 27) | (taonpd << 24) | (tanpd << 20) | (taxpd << 16) |
+ (todtlon << 12) | (todt_idle_off << 4);
+ mmdc0->mdotc = reg;
+ mmdc0->mdasp = CS0_END; /* CS addressing */
+
+ /* Step 3: Configure DDR type */
+ reg = (i->cs1_mirror << 19) | (i->walat << 16) | (i->bi_on << 12) |
+ (i->mif3_mode << 9) | (i->ralat << 6);
+ mmdc0->mdmisc = reg;
+
+ /* Step 4: Configure delay while leaving reset */
+ reg = (txpr << 16) | (i->sde_to_rst << 8) | (i->rst_to_cke << 0);
+ mmdc0->mdor = reg;
+
+ /* Step 5: Configure DDR physical parameters (density and burst len) */
+ reg = (m->rowaddr - 11) << 24 | /* ROW */
+ (m->coladdr - 9) << 20 | /* COL */
+ (1 << 19) | /* Burst Length = 8 for DDR3 */
+ (i->dsize << 16); /* DDR data bus size */
+ mmdc0->mdctl = reg;
+
+ /* Step 6: Perform ZQ calibration */
+ reg = (u32)0xa1390001; /* one-time HW ZQ calib */
+ mmdc0->mpzqhwctrl = reg;
+ if (i->dsize > 1)
+ mmdc1->mpzqhwctrl = reg;
+
+ /* Step 7: Enable MMDC with desired chip select */
+ reg = mmdc0->mdctl |
+ (1 << 31) | /* SDE_0 for CS0 */
+ ((i->ncs == 2) ? 1 : 0) << 30; /* SDE_1 for CS1 */
+ mmdc0->mdctl = reg;
+
+ /* Step 8: Write Mode Registers to Init DDR3 devices */
+ for (cs = 0; cs < i->ncs; cs++) {
+ /* MR2 */
+ reg = (i->rtt_wr & 3) << 9 | (m->SRT & 1) << 7 |
+ ((tcwl - 3) & 3) << 3;
+ mmdc0->mdscr = (u32)MR(reg, 2, 3, cs);
+ /* MR3 */
+ mmdc0->mdscr = (u32)MR(0, 3, 3, cs);
+ /* MR1 */
+ reg = ((i->rtt_nom & 1) ? 1 : 0) << 2 |
+ ((i->rtt_nom & 2) ? 1 : 0) << 6;
+ mmdc0->mdscr = (u32)MR(reg, 1, 3, cs);
+ reg = ((tcl - 1) << 4) | /* CAS */
+ (1 << 8) | /* DLL Reset */
+ ((twr - 3) << 9); /* Write Recovery */
+ /* MR0 */
+ mmdc0->mdscr = (u32)MR(reg, 0, 3, cs);
+ /* ZQ calibration */
+ reg = (1 << 10);
+ mmdc0->mdscr = (u32)MR(reg, 0, 4, cs);
+ }
+
+ /* Step 10: Power down control and self-refresh */
+ reg = (tcke & 0x7) << 16 |
+ 5 << 12 | /* PWDT_1: 256 cycles */
+ 5 << 8 | /* PWDT_0: 256 cycles */
+ 1 << 6 | /* BOTH_CS_PD */
+ (tcksrx & 0x7) << 3 |
+ (tcksre & 0x7);
+ mmdc0->mdpdc = reg;
+ mmdc0->mapsr = (u32)0x00011006; /* ADOPT power down enabled */
+
+ /* Step 11: Configure ZQ calibration: one-time and periodic 1ms */
+ mmdc0->mpzqhwctrl = (u32)0xa1390003;
+ if (i->dsize > 1)
+ mmdc1->mpzqhwctrl = (u32)0xa1390003;
+
+ /* Step 12: Configure and activate periodic refresh */
+ reg = (1 << 14) | /* REF_SEL: Periodic refresh cycles of 32kHz */
+ (7 << 11); /* REFR: Refresh Rate - 8 refreshes */
+ mmdc0->mdref = reg;
+
+ /* Step 13: Deassert config request - init complete */
+ mmdc0->mdscr = (u32)0x00000000;
+
+ /* wait for auto-ZQ calibration to complete */
+ mdelay(1);
+}
projects / karo-tx-uboot.git / commitdiff