From: Wolfgang Denk Date: Sun, 26 Jul 2009 22:24:55 +0000 (+0200) Subject: Prepare 2009.08-rc1 X-Git-Tag: v2009.08-rc1~6 X-Git-Url: https://git.kernelconcepts.de/?p=karo-tx-uboot.git;a=commitdiff_plain;h=10c7604d021949464b1e4ba903df95e6b2f0d2ff Prepare 2009.08-rc1 Update CHANGELOG, minor coding style fix. Signed-off-by: Wolfgang Denk --- diff --git a/CHANGELOG b/CHANGELOG index b9676604e3..9e42786bfb 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -1,3 +1,641 @@ +commit fafbb2c3e4b35b60ca303ed2ad1c6cf400cd9a22 +Author: rhabarber1848@web.de +Date: Fri Jul 24 08:16:30 2009 +0200 + + add WATCHDOG_RESET to allow LZMA kernel decompression on slow machines + + Signed-off-by: rhabarber1848@web.de + +commit 3c972849f2becbf19c13a24f090d293f37ecf616 +Author: Niklaus Giger +Date: Thu Jul 23 23:31:58 2009 +0200 + + Less verbose output when loading vxworks 6.x images + + Loading vxWorks 5.x images resulted just into 3 or 4 lines of output. + With vxWorks 6.x and the new GCC it emits about 30 lines, which is + far too noisy in my opinion. + + Signed-off-by: Niklaus Giger + +commit fcd3c87e495f3c48b70c919869fb1e0b93d4880b +Author: Wolfgang Denk +Date: Fri Jul 24 00:17:48 2009 +0200 + + Make include/common.h usable by assembler code + + Commit 70ebf316 factored out the ROUND() macro into include/common.h, + not realizing that the primary use of this macro on AT91 systems was + in start.S where common.h was not included, and could not be included + because it contains a lot of C code which the assembler doesn't + understand. + + This patch wraps such code in common.h in a "#ifndef __ASSEMBLY__" + construct, and then adds an include to cpu/arm926ejs/start.S thus + solving the problem. + + Signed-off-by: Wolfgang Denk + +commit deec15b3064d3bb0189aede3c2921fd7ee401a0f +Author: Heiko Schocher +Date: Thu Jul 23 13:27:04 2009 +0200 + + arm: add _lshrdi3.S + + Signed-off-by: Heiko Schocher + +commit 52b1bf2c5cd2f8af880dab503d0039b35570665b +Author: Wolfgang Denk +Date: Thu Jul 23 13:15:59 2009 +0200 + + Make linking against libgcc configurable + + Many (especially ARM) tool chains seem to come with broken or + otherwise unusable (for the purposes of builing U-Boot) run-time + support libraries `libgcc.a'. By using the "USE_PRIVATE_LIBGCC" + setting we allow to use alternative libraries instead. + + "USE_PRIVATE_LIBGCC" can either be set as an environment variable in + the shell, or as a command line argument when running "make", i. e. + $ make USE_PRIVATE_LIBGCC=yes + or + $ USE_PRIVATE_LIBGCC=yes + $ export USE_PRIVATE_LIBGCC + $ make + + The value of "USE_PRIVATE_LIBGCC" is the name of the directory which + contains the alternative run-time support library `libgcc.a'. The + special value "yes" selects the directory $(OBJTREE)/lib_$(ARCH) . + + Note that not all architectures provide an alternative `libgcc.a' in + their lib_$(ARCH) directories - so far, only ARM does. + + Signed-off-by: Wolfgang Denk + Cc: Jean-Christophe PLAGNIOL-VILLARD + Cc: Prafulla Wadaskar + cc: Stefan Roese + +commit 479105065d965121f57b55dcfe83a940cba46ac1 +Author: Dirk Behme +Date: Wed Jul 22 17:51:56 2009 +0200 + + Use do_div from div64.h for vsprintf + + Use do_div from div64.h for vsprintf in case of 64bit division. + For 32bit division, do_div from div64.h can't be used as it + needs a 64bit parameter. + + Signed-off-by: Dirk Behme + Acked-by: Stefan Roese + CC: Simon Kagstrom + +commit 48287792384a93d77d43aaaa1c06cac275bbe1bb +Author: Kyungmin Park +Date: Mon Jul 20 09:47:47 2009 +0900 + + Fix compiler warnings after loff_t change + + Now 'env_addr' type is loff_t so use correct field type. + + Signed-off-by: Kyungmin Park + +commit 9c67352f727a5b5eff531c852f9cff59fcb17f7f +Author: Wolfgang Denk +Date: Sun Jul 26 23:28:02 2009 +0200 + + Revert "ppc: Unlock cache-as-ram in a consistent manner" + + This reverts commit 982adfc610669482a32127282fe489857a92cfe3. + + This patch causes problems on MPC83xx boards - flash recognition stops + working. + + Signed-off-by: Wolfgang Denk + +commit 35cf3b57eafe3ee1f693e24267e0ecfefab60251 +Author: Jens Scharsig +Date: Fri Jul 24 10:31:48 2009 +0200 + + update the EB+MCF-EV123 board support + + This patch updates the support for EB+MCF-EV123 board and needs + the [PATCH 1/2 V3] new video driver for bus vcxk framebuffers + + * remove the board framebuffer driver + * use the common bus_vcxk framebuffer driver + * adds bmp support + * adds splashimage support + * fix serveral cosmetical errors + + Signed-off-by: Jens Scharsig + [agust@denx.de: fixed some style issues before applying] + Signed-off-by: Anatolij Gustschin + +commit 04538cdb752eeea8fd23cf7ac3394439f189fb77 +Author: Anatolij Gustschin +Date: Sun Jul 26 12:05:25 2009 +0200 + + video: bus_vcxk.c: fix style issues added by 50217dee + + Signed-off-by: Anatolij Gustschin + +commit 50217deeb07911d686790d34d468eb9a5245f68d +Author: Jens Scharsig +Date: Fri Jul 24 10:09:02 2009 +0200 + + new video driver for bus vcxk framebuffers + + This patch adds a new video driver + + * adds common bus_vcxk framebuffer driver + + Signed-off-by: Jens Scharsig + [agust@denx.de: fixed lots of style issues before applying] + Signed-off-by: Anatolij Gustschin + +commit 60e97419246d0a3615758ad6af40680aefb5f7f1 +Author: Alessandro Rubini +Date: Tue Jul 21 14:09:45 2009 +0200 + + lcd.h: define extern vidinfo_t for all cases + + include/lcd.h has different vidinfo for different platforms, + and several extern declaration, but one for the default case was + missing. This makes them a single extern declaration for everyone. + + Signed-off-by: Alessandro Rubini + +commit bcf0b5248952c6b03081dc5cc4ff9e0b2299c5fa +Author: Anatolij Gustschin +Date: Sun Jul 26 11:04:59 2009 +0200 + + mimc200.c: fix too long lines added by f68378d6 + + Signed-off-by: Anatolij Gustschin + +commit f68378d60a905d43155f2e89bf81999d3c93a90a +Author: Mark Jackson +Date: Tue Jul 21 11:35:22 2009 +0100 + + Add LCD support to MIMC200 board + + This patch updates the MIMC200 files to enable the LCD. + + Signed-off-by: Mark Jackson + +commit 69f32e6c24d41fcdf347ff64e9c13b25059ace58 +Author: Mark Jackson +Date: Tue Jul 21 11:18:44 2009 +0100 + + Add 16bit colour support in lcd.h + + This patch adds support for LCD_COLOR16 in include/lcd.h. + + Signed-off-by: Mark Jackson + +commit bdc873ea063b8cc6d44c6ab748b7723a97d8d7b3 +Author: Anatolij Gustschin +Date: Sun Jul 26 10:34:58 2009 +0200 + + lib_avr32/board.c: fix too long line added by 716ece1d + + Signed-off-by: Anatolij Gustschin + +commit 716ece1de9a7d43a61d8698ac41b71b64f66f9e9 +Author: Mark Jackson +Date: Tue Jul 21 11:11:37 2009 +0100 + + Add AVR32 LCD support + + This patch adds support for the AVR32 LCD controller. This patch is + based off the latest u-boot-video. + + A quick summary of what's going on:- + + Enable LCDC pixel clock + Enable LCDC port pins + Add framebuffer pointer to global_data struct + Allocate framebuffer + + To use the new code, update your board config to include something like + this:- + + #define CONFIG_LCD 1 + + #if defined(CONFIG_LCD) + #define CONFIG_CMD_BMP + #define CONFIG_ATMEL_LCD 1 + #define LCD_BPP LCD_COLOR16 + #define CONFIG_BMP_16BPP 1 + #define CONFIG_FB_ADDR 0x10600000 + #define CONFIG_WHITE_ON_BLACK 1 + #define CONFIG_VIDEO_BMP_GZIP 1 + #define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE 262144 + #define CONFIG_ATMEL_LCD_BGR555 1 + #define CONFIG_SYS_CONSOLE_IS_IN_ENV 1 + #define CONFIG_SPLASH_SCREEN 1 + #endif + + The standard U-Boot BMP and Splash-screen features should just work. + + Signed-off-by: Mark Jackson + [agust@denx.de: fixed some style issues] + Signed-off-by: Anatolij Gustschin + +commit 6111722a9281c6e04a7304d502556afff6a5a1f8 +Author: Alessandro Rubini +Date: Sun Jul 19 17:52:27 2009 +0200 + + video: move extern declarations from C to headers + + This moves some extern declaration from lcd.c to lcd.h, removing + unneeded ifdef around a pair of them. Additionally, since + gunzip_bmp() was declared static in cmd_bmp.c but extern in lcd.c, I + removed the static. The extra "#include " in cmd_bmp.c is + added to ensure the header is consistent with the source. + + This has been compile-tested on both ARM (at91 boards) and PowerPC + (HH405_config, TQM823L_LCD_config, mcc200_config), to test all use + combinations. + + Signed-off-by: Alessandro Rubini + [agust@denx.de: removed gunzip_bmp() fixes as commit c01171ea did it] + Signed-off-by: Anatolij Gustschin + +commit f51e001143c58447eb50e7aefa2b09eb4cc1410c +Author: Mike Frysinger +Date: Thu Jul 23 16:26:58 2009 -0400 + + Blackfin: restore EVT1 handling in linker script + + Sadly, the Blackfin linker script unification lost a small #ifdef logic + needed on older parts. Restore that CONFIG_BFIN_BOOTROM_USES_EVT1 logic. + + Signed-off-by: Mike Frysinger + +commit f33b325af666b12eafa9ab235b2cd59832d6e51c +Author: Wolfgang Denk +Date: Fri Jul 24 14:24:07 2009 +0200 + + Revert "zlib: updated to v.1.2.3" + + This reverts commit b201171f2b4d509f3ad510b214bee70ff902e3d6. + + The commit caused problems for example when unpacking kernel images: + + Uncompressing Kernel Image ... Error: inflate() returned -2 + GUNZIP: uncompress, out-of-mem or overwrite error - must + RESET board to recover + + Conflicts: + + include/u-boot/zlib.h + lib_generic/zlib.c + + Signed-off-by: Wolfgang Denk + +commit 4b1389e0ceb19e9b50b96fd3908483a6c2274fb0 +Author: Stefan Roese +Date: Tue Jul 21 14:06:29 2009 +0200 + + ppc4xx: Add chip_config command to AMCC Kilauea eval board + + This patch removes the "alterpll" command and replaces it with the now + ppc4xx standard "chip_config" command to configure the I2C bootstrap + EEPROM. + + Signed-off-by: Stefan Roese + +commit f6af8ce0c80327cb6aaa347642026ad838335c23 +Author: Stefan Roese +Date: Tue Jul 21 14:33:52 2009 +0200 + + ppc4xx: Fix EEPROM configuration on Kilauea + + Kilauea has an AT24C02 EEPROM which has an 8 byte page. Without defining + CONFIG_SYS_EEPROM_PAGE_WRITE_BITS to 3 the "eeprom" command doesn't + work correctly. + + Additionally the page write delay (CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS) + is set to a more defensive value of 10ms. + + Signed-off-by: Stefan Roese + +commit 99d8b23bc7e2be04fcbf49c5cec9f5ae76df290c +Author: Matthias Fuchs +Date: Wed Jul 22 13:56:21 2009 +0200 + + ppc4xx: Add 405EP based PMC405DE board + + Signed-off-by: Matthias Fuchs + Signed-off-by: Stefan Roese + +commit da799f66ad1d4fc36dd20cc2d7e584493fda8546 +Author: Matthias Fuchs +Date: Mon Jul 20 12:15:38 2009 +0200 + + ppc4xx: Add struct for 4xx GPIO controller registers + + Signed-off-by: Matthias Fuchs + Signed-off-by: Stefan Roese + +commit 58ea142fb2e969f32306c8da1dabfaebd6fa141a +Author: Matthias Fuchs +Date: Wed Jul 22 17:27:56 2009 +0200 + + ppc4xx: Replace 4xx lowercase SPR references + + Signed-off-by: Matthias Fuchs + Signed-off-by: Stefan Roese + +commit 87c0b72908e05662b8b415e26e1042f4779629da +Author: Stefan Roese +Date: Mon Jul 20 06:57:27 2009 +0200 + + Add "chip_config" command for PPC4xx bootstrap configuration + + This patch adds a generic command for programming I2C bootstrap + eeproms on PPC4xx. An implementation for Canyonlands board is + included. + + The command name is intentionally chosen not to be PPC4xx specific. + This way other CPU's/SoC's can implement a similar command under + the same name, perhaps with a different syntax. + + Usage on Canyonlands: + + => chip_config + Available configurations (I2C address 0x52): + 600-nor - NOR CPU: 600 PLB: 200 OPB: 100 EBC: 100 + 600-nand - NAND CPU: 600 PLB: 200 OPB: 100 EBC: 100 + 800-nor - NOR CPU: 800 PLB: 200 OPB: 100 EBC: 100 + 800-nand - NAND CPU: 800 PLB: 200 OPB: 100 EBC: 100 + 1000-nor - NOR CPU:1000 PLB: 200 OPB: 100 EBC: 100 + 1000-nand - NAND CPU:1000 PLB: 200 OPB: 100 EBC: 100 + 1066-nor - NOR CPU:1066 PLB: 266 OPB: 88 EBC: 88 *** + 1066-nand - NAND CPU:1066 PLB: 266 OPB: 88 EBC: 88 + => chip_config 600-nor + Using configuration: + 600-nor - NOR CPU: 600 PLB: 200 OPB: 100 EBC: 100 + done (dump via 'i2c md 52 0.1 10') + Reset the board for the changes to take effect + + Other 4xx boards will be migrated to use this command soon + as well. + + Signed-off-by: Stefan Roese + Signed-off-by: Dirk Eibach + Acked-by: Matthias Fuchs + +commit 10c1b218556ed9871f36bc0c407f4f2f6196353b +Author: Peter Tyser +Date: Fri Jul 17 19:01:16 2009 -0500 + + xpedite1k: Move to X-ES vendor directory + + The XPedite1000 is an X-ES product thus it can be put in board/xes along + with other X-ES boards. Along with the move, the board was renamed to + XPedite1000 from XPedite1K to fit X-ES's standard naming convention. + Maintainership was also transfered to Peter Tyser. + + Signed-off-by: Peter Tyser + Signed-off-by: Stefan Roese + +commit 54381b79d268e1bead5d78ed8423df31a3cb0e2c +Author: Peter Tyser +Date: Fri Jul 17 19:01:15 2009 -0500 + + xpedite1k: Sync checkboard() with other X-ES boards + + Signed-off-by: Peter Tyser + Signed-off-by: Stefan Roese + +commit 9b4ef1f5dc0daab64f46249a32e67279c4d44fd2 +Author: Peter Tyser +Date: Fri Jul 17 19:01:14 2009 -0500 + + xpedite1k: Sync up board config options with other X-ES boards + + Signed-off-by: Peter Tyser + Signed-off-by: Stefan Roese + +commit 4cdad5f43ae67e4ceeac69ef4af4392bd2f7381f +Author: Peter Tyser +Date: Fri Jul 17 19:01:13 2009 -0500 + + xpedite1k: Sync organization of board config with other X-ES boards + + This change should have no functional effect + + Signed-off-by: Peter Tyser + Signed-off-by: Stefan Roese + +commit c4ae1a0257a0f5008ee2686e8aa92fba3992f279 +Author: Peter Tyser +Date: Fri Jul 17 19:01:12 2009 -0500 + + xpedite1k: Sync up commands and environment with other X-ES boards + + Signed-off-by: Peter Tyser + Signed-off-by: Stefan Roese + +commit fbc7951ea84c2fe6da0f6007b672ed35bae91acb +Author: Peter Tyser +Date: Fri Jul 17 19:01:11 2009 -0500 + + xpedite1k: Disable unused ethernet port 1 + + The XPedite1000 only has 2 available ethernet ports: + ppc_4xx_eth2 (EMAC2) and ppc_4xx_eth3 (EMAC3) + + Signed-off-by: Peter Tyser + Signed-off-by: Stefan Roese + +commit 767e32ad369d83f55f950e6938e68b6dba7fa65f +Author: Peter Tyser +Date: Fri Jul 17 19:01:10 2009 -0500 + + xpedite1k: Store environment in flash + + Previously an I2C EEPROM was used. The EEPROM had size, reliability, + and access issues which are resolved by storing the environment in + flash. + + Signed-off-by: Peter Tyser + Signed-off-by: Stefan Roese + +commit b88da157f9990cd2cb081e4faea4b9581b5d0e2f +Author: Peter Tyser +Date: Fri Jul 17 19:01:09 2009 -0500 + + xpedite1k: Add support for additional GPIO pins + + Enable GPIO pins for an I2C EEPROM write protect, a system reset pin, + and a PMC #MONARCH pin. These pins are not currently used in U-Boot, + but are used in OSes and may be used in U-Boot in the future. + + Signed-off-by: Peter Tyser + Signed-off-by: Stefan Roese + +commit 42735815dd9ba39efe51203868aebce04053c8de +Author: Peter Tyser +Date: Fri Jul 17 19:01:08 2009 -0500 + + xpedite1k: Add support for optional flashes + + The XPedite1000 can be built with 4 total flashes: + - 512KB AMD socketed + - 16MB Intel soldered + - 2 x 32MB AMD MirrorBit flashes + + Add support for the optional 2 32MB CFI-compliant AMD flashes + + Signed-off-by: Peter Tyser + Signed-off-by: Stefan Roese + +commit e02990764c7415c84668823a0fc8c5b4dd8d8cf0 +Author: Peter Tyser +Date: Fri Jul 17 19:01:07 2009 -0500 + + xpedite1k: Cleanup coding style + + Signed-off-by: Peter Tyser + Signed-off-by: Stefan Roese + +commit 086ff34a3a7e5e595630d658c1c13778399452d1 +Author: Peter Tyser +Date: Fri Jul 17 19:01:06 2009 -0500 + + xpedite1k: Remove support for reading MACs from EEPROM + + By default, the XPedite1000 comes installed with xMon, a proprietary + bootloader. xMon stores its MAC address in an onboard EEPROM. Rather + than requiring a non-standard location in the EEPROM to be reserved for + MAC addresses, store the MAC addresses in U-Boot's standard environment. + A U-Boot application or OS application can be used to migrate xMon MAC + addresses to U-Boot's environment if necessary. + + Signed-off-by: Peter Tyser + Signed-off-by: Stefan Roese + +commit 108d6d0099372f9f6532c3198fbaacabc121c9b3 +Author: Peter Tyser +Date: Fri Jul 17 19:01:05 2009 -0500 + + xpedite1k: Remove support for fixed SDRAM configuration + + All XPedite1000's have SPD EEPROMs present and no fixed configuration + parameters are currently defined or used + + Signed-off-by: Peter Tyser + Signed-off-by: Stefan Roese + +commit c86d00a2ed923002f1ab0bfb0a925522628302e9 +Author: Peter Tyser +Date: Fri Jul 17 19:01:04 2009 -0500 + + xpedite1k: Remove CONFIG_SYS_DRAM_TEST support + + POST or command line tests provide similar functionality + + Signed-off-by: Peter Tyser + Signed-off-by: Stefan Roese + +commit 11ad309c183b176d8866944026a63c0f1c626f56 +Author: Peter Tyser +Date: Fri Jul 17 19:01:03 2009 -0500 + + xpedite1k: Use standard CFI flash driver + + Using the CFI flash driver will allow write access to the 16MB Intel + StrataFlash present on the XPedite1000. The 512KB socketed (non + CFI-compliant flash) will no longer be writable. + + The mapping of the 16MB Strata flash was moved to 0xff000000 and the + 512KB AMD socketed flash was moved to 0xfe000000. + + Signed-off-by: Peter Tyser + Signed-off-by: Stefan Roese + +commit d4d2e79bb433fc7ec18c68cc49cc6b7433d1320c +Author: Matthias Fuchs +Date: Thu Jul 16 22:13:57 2009 +0200 + + ppc4xx: Cleanup PLU405 board code + + Some Coding style cleanup (braces, whitespaces, long lines) + + Signed-off-by: Matthias Fuchs + Signed-off-by: Stefan Roese + +commit b209a114829dc8a7a0e39a9335b6e4aebf9742cb +Author: Dirk Eibach +Date: Fri Jul 17 14:16:40 2009 +0200 + + ppc4xx: Add DL-Vision 405EP board support + + Board support for the Guntermann & Drunck DL-Vision. + + Signed-off-by: Dirk Eibach + Signed-off-by: Stefan Roese + +commit 9b1b8c8a1bf52e9b65e1958e5205838576066cbc +Author: Dirk Eibach +Date: Fri Jul 10 14:47:32 2009 +0200 + + ppc4xx: Fix missing freqOPB for 405EP + + In cpu/ppc4xx/speed.c initialization of sysInfo->freqOPB for 405EP was + left out for no obvious reason. + + Signed-off-by: Dirk Eibach + Signed-off-by: Stefan Roese + +commit 0a371ca08908c9b2a58171223a79bffea1f7c6f5 +Author: Stefan Roese +Date: Tue Jul 14 15:53:08 2009 +0200 + + ppc4xx: Fix TLB reset problem with recent 44x images + + Patch d873133f [ppc4xx: Add Sequoia RAM-booting target] broke "normal" + booting on some 44x platforms. This breakage is only noticed in some + cases while powercycling. As it seems, the code in question in start.S + didn't invalidate TLB #0. This makes sense since this TLB is used for + the bootrom mapping. With the patch mentioned above even TLB #0 got + invalidated resulting in an error later on. + + This patch now fixes this issue by only invalidating TLB #0 in the RAM- + booting case. + + Tested succesfully on Sequoia and Canyonlands. + + Signed-off-by: Stefan Roese + Cc: Dirk Eibach + +commit 44259bb9e696d22bf1773181111855a29f00cf33 +Author: Prafulla Wadaskar +Date: Fri Jul 17 19:56:30 2009 +0530 + + usb: bugfix driver/usb/host/ehci-hcd.c function ehci_submit_root + + This change is cheked in Linux source and fix found to be in sync. + This patch is tested for USB host interface on Kirkwood based + Sheevaplug platform (ARM little endian board) + + Risk: the impact of this patch is not validated on big endian board. + This need to be checked... + + Signed-off-by: Prafulla Wadaskar + Signed-off-by: Remy Bohmer + +commit 28958b8bea4c66629c5a22fd3c8b0d49df90383d +Author: Wolfgang Denk +Date: Thu Jul 23 22:23:23 2009 +0200 + + Coding Style cleanup; update CHANGELOG. + + Signed-off-by: Wolfgang Denk + commit 2632c008e2c2cd61fefb622ed671ea3e6bd2e2a6 Author: Mike Frysinger Date: Tue Jul 21 22:59:36 2009 -0400 diff --git a/Makefile b/Makefile index 22bfeebc25..ef535ed881 100644 --- a/Makefile +++ b/Makefile @@ -22,9 +22,9 @@ # VERSION = 2009 -PATCHLEVEL = 06 +PATCHLEVEL = 08 SUBLEVEL = -EXTRAVERSION = +EXTRAVERSION = -rc1 ifneq "$(SUBLEVEL)" "" U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION) else diff --git a/doc/README.bus_vcxk b/doc/README.bus_vcxk index 4eb8fe826e..cbcd8c90cc 100644 --- a/doc/README.bus_vcxk +++ b/doc/README.bus_vcxk @@ -82,4 +82,3 @@ CONFIG_SYS_VCXK__DDR defines the register which configures the direction for valid values for see CONFIG_SYS_VCXK__PIN -