From: Ladislav Michl Date: Tue, 21 Apr 2009 23:12:04 +0000 (+0200) Subject: arm925t: Fix CONFIG_SYS_HZ to 1000 X-Git-Tag: v2009.06-rc1~7^2~1 X-Git-Url: https://git.kernelconcepts.de/?p=karo-tx-uboot.git;a=commitdiff_plain;h=3791a1187c1401c33c9512595e6e89dbb46230c5 arm925t: Fix CONFIG_SYS_HZ to 1000 Let CONFIG_SYS_HZ to have value of 1000 effectively fixing all users of get_timer. Changes since original version: * Set PTV=2 (divisor 8) for boards using 12MHz timer clock source to improve timer resolution. Signed-off-by: Ladislav Michl --- diff --git a/cpu/arm925t/interrupts.c b/cpu/arm925t/interrupts.c index e5c77f7a0f..ec2a9789d3 100644 --- a/cpu/arm925t/interrupts.c +++ b/cpu/arm925t/interrupts.c @@ -1,4 +1,7 @@ /* + * (C) Copyright 2009 + * 2N Telekomunikace, + * * (C) Copyright 2003 * Texas Instruments, * @@ -37,7 +40,8 @@ #include #include -#define TIMER_LOAD_VAL 0xffffffff +#define TIMER_LOAD_VAL 0xffffffff +#define TIMER_CLOCK (CONFIG_SYS_CLK_FREQ / (2 << CONFIG_SYS_PTV)) static uint32_t timestamp; static uint32_t lastdec; @@ -79,85 +83,41 @@ void set_timer (ulong t) /* delay x useconds AND preserve advance timestamp value */ void udelay (unsigned long usec) { - ulong tmo, tmp; - - if (usec >= 1000) { /* if "big" number, spread normalization to seconds */ - tmo = usec / 1000; /* start to normalize for usec to ticks per sec */ - tmo *= CONFIG_SYS_HZ; /* find number of "ticks" to wait to achieve target */ - tmo /= 1000; /* finish normalize. */ - } else { /* else small number, don't kill it prior to HZ multiply */ - tmo = usec * CONFIG_SYS_HZ; - tmo /= (1000*1000); + int32_t tmo = usec * (TIMER_CLOCK / 1000) / 1000; + uint32_t now, last = __raw_readl(CONFIG_SYS_TIMERBASE + READ_TIM); + + while (tmo > 0) { + now = __raw_readl(CONFIG_SYS_TIMERBASE + READ_TIM); + if (last < now) /* count down timer underflow */ + tmo -= TIMER_LOAD_VAL - now + last; + else + tmo -= last - now; + last = now; } - - tmp = get_timer (0); /* get current timestamp */ - if ((tmo + tmp + 1) < tmp) /* if setting this fordward will roll time stamp */ - reset_timer_masked (); /* reset "advancing" timestamp to 0, set lastdec value */ - else - tmo += tmp; /* else, set advancing stamp wake up time */ - - while (get_timer_masked () < tmo) /* loop till event */ - /*NOP*/; } void reset_timer_masked (void) { /* reset time */ - lastdec = __raw_readl(CONFIG_SYS_TIMERBASE + READ_TIM); + lastdec = __raw_readl(CONFIG_SYS_TIMERBASE + READ_TIM) / + (TIMER_CLOCK / CONFIG_SYS_HZ); timestamp = 0; /* start "advancing" time stamp from 0 */ } ulong get_timer_masked (void) { - uint32_t now = __raw_readl(CONFIG_SYS_TIMERBASE + READ_TIM); - - if (lastdec >= now) { /* normal mode (non roll) */ - /* normal mode */ - timestamp += lastdec - now; /* move stamp fordward with absoulte diff ticks */ - } else { /* we have overflow of the count down timer */ - /* nts = ts + ld + (TLV - now) - * ts=old stamp, ld=time that passed before passing through -1 - * (TLV-now) amount of time after passing though -1 - * nts = new "advancing time stamp"...it could also roll and cause problems. - */ - timestamp += lastdec + TIMER_LOAD_VAL - now; - } + uint32_t now = __raw_readl(CONFIG_SYS_TIMERBASE + READ_TIM) / + (TIMER_CLOCK / CONFIG_SYS_HZ); + if (lastdec < now) /* count down timer underflow */ + timestamp += TIMER_LOAD_VAL / (TIMER_CLOCK / CONFIG_SYS_HZ) - + now + lastdec; + else + timestamp += lastdec - now; lastdec = now; return timestamp; } -/* waits specified delay value and resets timestamp */ -void udelay_masked (unsigned long usec) -{ -#ifdef CONFIG_INNOVATOROMAP1510 - #define LOOPS_PER_MSEC 60 /* tuned on omap1510 */ - volatile int i, time_remaining = LOOPS_PER_MSEC*usec; - for (i=time_remaining; i>0; i--) { } -#else - - ulong tmo; - ulong endtime; - signed long diff; - - if (usec >= 1000) { /* if "big" number, spread normalization to seconds */ - tmo = usec / 1000; /* start to normalize for usec to ticks per sec */ - tmo *= CONFIG_SYS_HZ; /* find number of "ticks" to wait to achieve target */ - tmo /= 1000; /* finish normalize. */ - } else { /* else small number, don't kill it prior to HZ multiply */ - tmo = usec * CONFIG_SYS_HZ; - tmo /= (1000*1000); - } - - endtime = get_timer_masked () + tmo; - - do { - ulong now = get_timer_masked (); - diff = endtime - now; - } while (diff >= 0); -#endif -} - /* * This function is derived from PowerPC code (read timebase as long long). * On ARM it just returns the timer value. diff --git a/include/configs/SX1.h b/include/configs/SX1.h index caa6592f7a..61492766f6 100644 --- a/include/configs/SX1.h +++ b/include/configs/SX1.h @@ -135,12 +135,12 @@ #define CONFIG_SYS_LOAD_ADDR 0x10000000 /* default load address */ -/* The 1510 has 3 timers, they can be driven by the RefClk (12Mhz) or by DPLL1. +/* The 1510 has 3 timers, they can be driven by the RefClk (12MHz) or by DPLL1. * This time is further subdivided by a local divisor. */ #define CONFIG_SYS_TIMERBASE OMAP1510_TIMER1_BASE /* use timer 1 */ -#define CONFIG_SYS_PTV 7 /* 2^(PTV+1), divide by 256 */ -#define CONFIG_SYS_HZ ((CONFIG_SYS_CLK_FREQ)/(2 << CONFIG_SYS_PTV)) +#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ +#define CONFIG_SYS_HZ 1000 /*----------------------------------------------------------------------- * Stack sizes diff --git a/include/configs/netstar.h b/include/configs/netstar.h index 39560de3c5..5cfee66229 100644 --- a/include/configs/netstar.h +++ b/include/configs/netstar.h @@ -222,12 +222,12 @@ #define CONFIG_SYS_LOAD_ADDR PHYS_SDRAM_1 + 0x400000 /* default load address */ -/* The 1510 has 3 timers, they can be driven by the RefClk (12Mhz) or by DPLL1. +/* The 1510 has 3 timers, they can be driven by the RefClk (12MHz) or by DPLL1. * This time is further subdivided by a local divisor. */ #define CONFIG_SYS_TIMERBASE OMAP1510_TIMER1_BASE -#define CONFIG_SYS_PTV 7 /* 2^(pvt+1), divide by 256 */ -#define CONFIG_SYS_HZ ((CONFIG_SYS_CLK_FREQ)/(2 << CONFIG_SYS_PTV)) +#define CONFIG_SYS_PTV 7 +#define CONFIG_SYS_HZ 1000 #define OMAP5910_DPLL_DIV 1 #define OMAP5910_DPLL_MUL ((CONFIG_SYS_CLK_FREQ * \ diff --git a/include/configs/omap1510inn.h b/include/configs/omap1510inn.h index 6c1c5ec0d7..8408209d6c 100644 --- a/include/configs/omap1510inn.h +++ b/include/configs/omap1510inn.h @@ -132,12 +132,12 @@ #define CONFIG_SYS_LOAD_ADDR 0x10000000 /* default load address */ -/* The 1510 has 3 timers, they can be driven by the RefClk (12Mhz) or by DPLL1. +/* The 1510 has 3 timers, they can be driven by the RefClk (12MHz) or by DPLL1. * This time is further subdivided by a local divisor. */ #define CONFIG_SYS_TIMERBASE OMAP1510_TIMER1_BASE /* use timer 1 */ -#define CONFIG_SYS_PTV 7 /* 2^(PTV+1), divide by 256 */ -#define CONFIG_SYS_HZ ((CONFIG_SYS_CLK_FREQ)/(2 << CONFIG_SYS_PTV)) +#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ +#define CONFIG_SYS_HZ 1000 /*----------------------------------------------------------------------- * Stack sizes diff --git a/include/configs/voiceblue.h b/include/configs/voiceblue.h index 3f97843722..aa8efaad5a 100644 --- a/include/configs/voiceblue.h +++ b/include/configs/voiceblue.h @@ -210,12 +210,12 @@ #define CONFIG_SYS_MEMTEST_START PHYS_SDRAM_1 #define CONFIG_SYS_MEMTEST_END PHYS_SDRAM_1 + PHYS_SDRAM_1_SIZE - PHYS_SDRAM_1_RESERVED -/* The 1510 has 3 timers, they can be driven by the RefClk (12Mhz) or by DPLL1. +/* The 1510 has 3 timers, they can be driven by the RefClk (12MHz) or by DPLL1. * This time is further subdivided by a local divisor. */ #define CONFIG_SYS_TIMERBASE OMAP1510_TIMER1_BASE #define CONFIG_SYS_PTV 7 /* 2^(PTV+1), divide by 256 */ -#define CONFIG_SYS_HZ ((CONFIG_SYS_CLK_FREQ)/(2 << CONFIG_SYS_PTV)) +#define CONFIG_SYS_HZ 1000 #define OMAP5910_DPLL_DIV 1 #define OMAP5910_DPLL_MUL ((CONFIG_SYS_CLK_FREQ * \