From: Stefan Roese Date: Wed, 9 Jan 2008 09:28:20 +0000 (+0100) Subject: ppc4xx: Change LWMON5 to not use OCM for init-ram and POST anymore X-Git-Tag: v1.3.2-rc1~102^2~49^2~27^2~1 X-Git-Url: https://git.kernelconcepts.de/?p=karo-tx-uboot.git;a=commitdiff_plain;h=8f24e0637ae113500d8bd60d80d57afcc0aa8bde ppc4xx: Change LWMON5 to not use OCM for init-ram and POST anymore This patch configures the LWMON5 port to use d-cache as init-ram and the unused GPT0_COMP6 as POST WORD storage. Signed-off-by: Stefan Roese --- diff --git a/board/lwmon5/init.S b/board/lwmon5/init.S index 6798e80985..5aade72b52 100644 --- a/board/lwmon5/init.S +++ b/board/lwmon5/init.S @@ -57,7 +57,7 @@ tlbtab: #ifdef CFG_INIT_RAM_DCACHE /* TLB-entry for init-ram in dcache (SA_I must be turned off!) */ - tlbentry(CFG_INIT_RAM_ADDR, SZ_64K, CFG_INIT_RAM_ADDR, 0, AC_R|AC_W|AC_X|SA_G) + tlbentry(CFG_INIT_RAM_ADDR, SZ_4K, CFG_INIT_RAM_ADDR, 0, AC_R|AC_W|AC_X|SA_G) #endif /* TLB-entry for PCI Memory */ diff --git a/include/configs/lwmon5.h b/include/configs/lwmon5.h index 5210024d8f..0bf536b6b5 100644 --- a/include/configs/lwmon5.h +++ b/include/configs/lwmon5.h @@ -71,15 +71,20 @@ /*----------------------------------------------------------------------- * Initial RAM & stack pointer *----------------------------------------------------------------------*/ -/* 440EPx/440GRx have 16KB of internal SRAM, so no need for D-Cache */ -#define CFG_INIT_RAM_ADDR CFG_OCM_BASE /* OCM */ -#define CFG_OCM_DATA_ADDR CFG_OCM_BASE - +/* + * On LWMON5 we use D-cache as init-ram and stack pointer. We also move + * the POST_WORD from OCM to a 440EPx register that preserves it's + * content during reset (GPT0_COM6). This way we reserve the OCM (16k) + * for logbuffer only. + */ +#define CFG_INIT_RAM_DCACHE 1 /* d-cache as init ram */ +#define CFG_INIT_RAM_ADDR 0x70000000 /* DCache */ #define CFG_INIT_RAM_END (4 << 10) -#define CFG_GBL_DATA_SIZE 256 /* num bytes initial data */ +#define CFG_GBL_DATA_SIZE 256 /* num bytes initial data*/ #define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) -#define CFG_POST_WORD_ADDR (CFG_GBL_DATA_OFFSET - 0x4) -#define CFG_INIT_SP_OFFSET CFG_POST_WORD_ADDR +#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET +#define CFG_POST_ALT_WORD_ADDR (CFG_PERIPHERAL_BASE + GPT0_COMP6) + /* unused GPT0 COMP reg */ /*----------------------------------------------------------------------- * Serial Port diff --git a/include/ppc440.h b/include/ppc440.h index 90e56b0989..b0d16fb4a7 100644 --- a/include/ppc440.h +++ b/include/ppc440.h @@ -1354,8 +1354,6 @@ #define plb1_bearl (PLB_ARBITER_BASE+ 0x0C) #define plb1_bearh (PLB_ARBITER_BASE+ 0x0D) -#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \ - defined(CONFIG_440EPX) || defined(CONFIG_440GRX) /* Pin Function Control Register 1 */ #define SDR0_PFC1 0x4101 #define SDR0_PFC1_U1ME_MASK 0x02000000 /* UART1 Mode Enable */ @@ -1421,7 +1419,7 @@ #define SDR0_MFR_PKT_REJ_EN1 0x00080000 /* Pkt Rej. Enable on EMAC3(1) */ #define SDR0_MFR_PKT_REJ_POL 0x00200000 /* Packet Reject Polarity */ -#endif /* defined(CONFIG_440EP) || defined(CONFIG_440GR) */ +#define GPT0_COMP6 0x00000098 #if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) #define SDR0_USB2D0CR 0x0320