From: Fabio Estevam Date: Mon, 18 Jun 2012 05:51:49 +0000 (+0000) Subject: doc: README.mx28_common: Add missing entry into Contents X-Git-Tag: v2012.07-rc2~4^2~3 X-Git-Url: https://git.kernelconcepts.de/?p=karo-tx-uboot.git;a=commitdiff_plain;h=e9fd0a00a478f7de7f2998fa6259285cb5f41a22 doc: README.mx28_common: Add missing entry into Contents commit 419ea2d84 (mx28: Split the README into a common part and a m28 specific part) missed an entry in the Contents section that was part of the original file. Add the missing entry for completeness. Signed-off-by: Fabio Estevam Acked-by: Marek Vasut --- diff --git a/doc/README.mx28_common b/doc/README.mx28_common index 448d221162..f73978de1f 100644 --- a/doc/README.mx28_common +++ b/doc/README.mx28_common @@ -19,6 +19,7 @@ Contents 1) Prerequisites 2) Compiling U-Boot for a MX28 based board 3) Installation of U-Boot for a MX28 based board to SD card +4) Installation of U-Boot into NAND flash 1) Prerequisites ---------------- @@ -146,8 +147,8 @@ NOTE: If the user needs to adjust the start sector, the "mxsboot" tool contains a "-p" switch for that purpose. The "-p" switch takes the sector number as an argument. -4) Installation of U-Boot for NAND flash ------------------------------------------------ +4) Installation of U-Boot into NAND flash +----------------------------------------- To boot a MX28 based board from NAND, set the boot mode DIP switches according to i.MX28 manual chapter 12.2.1 (Table 12-2), PORT=GPMI, NAND 1.8 V.