]> git.kernelconcepts.de Git - karo-tx-uboot.git/history - arch
usb: kconfig: usb keyboard kconfig
[karo-tx-uboot.git] / arch /
2015-09-09 Nikita Kiryanovarm: mx6: kconfig: don't select CPU_V7 per board
2015-09-09 Nikita Kiryanovarm: mx6: cm-fx6: move cm-fx6 target under ARCH_MX6
2015-09-09 Peng Fanimx: mx6qp Enable PRG clock for IPU
2015-09-09 Ye.Liimx: mx6: hab : Remove the cache issue workaroud in...
2015-09-09 Peng Fanimx: mx6: ccm: Change the clock settings for i.MX6QP
2015-09-09 Peng Fanimx: add cpu type for i.MX6QP/DP
2015-09-09 Shaohui Xiepowerpc/t4240: update serdes table
2015-09-09 Aneesh Bansalpowerpc/mpc85xx: SECURE BOOT-Copy Boot Script on RAM
2015-09-09 Aneesh Bansalpowerpc/mpc85xx: SECURE BOOT- NAND secure boot target...
2015-09-09 Siva Durga Prasad... armv8: caches: Added routine to set non cacheable region
2015-09-09 Nikhil Badolapowerpc/mpc85xx: Correct CONFIG_USB_MAX_CONTROLLER_COUN...
2015-09-09 Shengzhou Liupowerpc/t1024: update fman liodn for mac1
2015-09-09 gaurav ranapowerpc/T104xD4: Add Secure boot support for T104xD4RDB...
2015-09-09 Tom WarrenT210: Add support for 64-bit T210-based P2571 board
2015-09-09 Tom WarrenP2571: dts: Add DT file for Tegra210 P2571 board
2015-09-09 Tom WarrenARM: Tegra210: Add support to common Tegra source/confi...
2015-09-09 Tom WarrenARM: Tegra210: Add SoC code/include files for T210
2015-09-09 Tom WarrenTegra: Rework KConfig options to allow 64-bit builds...
2015-09-09 Tom WarrenTegra210: Fix 64-bit build warning about save_boot_para...
2015-09-09 Thierry RedingARM: tegra: Initialize timer earlier
2015-09-09 Thierry RedingARM: tegra: Use standard cache enable for 64-bit
2015-09-09 Thierry RedingARM: tegra: Restrict usable RAM to 32-bit on 64-bit...
2015-09-09 Thierry Redingarmv8/cache: Fix page table creation
2015-09-09 Bin Mengx86: Reserve PCIe ECAM address range in the E820 table
2015-09-09 Bin Mengx86: qemu: Turn on PCIe ECAM address range decoding...
2015-09-09 Bin Mengx86: qemu: Enable writing MP table
2015-09-09 Bin Mengx86: Allow cpu-x86 driver to be probed for UP
2015-09-09 Bin Mengx86: qemu: Enable I/O APIC chip select on PIIX3
2015-09-09 Bin Mengx86: mpspec: Move writing ISA interrupt entry after PCI
2015-09-09 Bin Mengx86: mpspec: Allow platform to determine how PIRQ is...
2015-09-09 Bin Mengx86: Convert to use driver model pci on queensbay/crownbay
2015-09-09 Bin Mengx86: pci: Do not assign irq 0 to pci device
2015-09-09 Bin Mengx86: pci: Assign pci irqs to all functions
2015-09-09 Bin Mengx86: Enable DM RTC support for all x86 boards
2015-09-09 Bin Mengx86: Change pci option rom area MTRR setting to cacheable
2015-09-09 Bin Mengx86: Simplify architecture defined exception handling...
2015-09-09 Bin Mengx86: Display correct CS/EIP/EFLAGS when there is an...
2015-09-09 Michal SimekARM: zynqmp: Wire up SATA for the board
2015-09-09 Michal SimekARM: zynqmp: Wire up ethernet controllers
2015-09-09 Michal SimekARM: zynq: Add support for zc770-xm011
2015-09-09 Michal SimekARM: zynq: DT: Update zc770 dtses
2015-09-09 Michal SimekARM: zynq: DT: Add zc702 pushbuttons to DT as gpio...
2015-09-09 Michal SimekARM: zynq: DT: Add missing interrupt for L2 pl310
2015-09-09 Michal SimekARM: zynq: DT: Get rid of ps-clk-frequency
2015-09-09 Michal SimekARM: zynq: DT: Update years in copyright
2015-09-09 Michal SimekARM: zynq: DT: Sync zc702/zc706/zed/zybo DT with kernel
2015-09-09 Michal SimekARM: zynq: DT: Add reference to bus node
2015-09-09 Michal SimekARM: zynq: DT: Add pinctrl node
2015-09-09 Michal SimekARM: zynq: DT: Cleanup address-cells and size-cells
2015-09-09 Michal SimekARM: zynq: DT: Clean up timer device tree nodes
2015-09-09 Michal SimekARM: zynq: DT: Use the zynq binding with macb
2015-09-09 Michal SimekARM: zynq: DT: Fix GEM register area size
2015-09-09 Michal Simekspi: Fix zynq SPI binding
2015-09-09 Michal SimekARM: zynq: DT: Remove 222 MHz OPP
2015-09-09 Michal SimekARM: zynq: DT: Migrate UART to Cadence binding
2015-09-09 Michal SimekARM: zynq: DT: Add a fixed regulator for CPU voltage
2015-09-09 Michal SimekARM: zynq: DT: Add missing nodes to DTSI
2015-09-09 Michal SimekARM: zynq: DT: Use the right names for nodes
2015-09-09 Michal Simekzynqmp: Add support for IP detection via SLCR
2015-09-09 Michal Simekzynqmp: mp: Simplify set_r5_start handling
2015-09-09 Siva Durga Prasad... zynqmp: Define ep config for ZynqMP
2015-09-09 Siva Durga Prasad... zynqmp: Kconfig: Move zynqmp Kconfig
2015-09-09 Thierry Redingarm64: Handle arbitrary CONFIG_SYS_MALLOC_F_LEN values
2015-09-09 Thierry RedingARM: tegra: Build warning fixes for 64-bit
2015-09-09 Simon Glasstegra124: Implement spl_was_boot_source()
2015-09-09 Antonio Borneostm32f4: add cpu clock option for 180 MHz
2015-09-09 Antonio Borneostm32f429: pass the device unique ID in DTB
2015-09-09 Masahiro YamadaKill unneeded #include <linux/kconfig.h>
2015-09-09 Paul Kocialkowskiam33xx: Unused get_board_rev function removal
2015-09-09 Paul Kocialkowskiomap3: CONFIG_REVISION_TAG ifdef check for get_board_rev
2015-09-09 Paul Kocialkowskiomap5: Definitions for SYS_BOOT-based fallback boot...
2015-09-09 Paul Kocialkowskiomap4: Definitions for SYS_BOOT-based fallback boot...
2015-09-09 Paul Kocialkowskiomap3: Definitions for SYS_BOOT-based fallback boot...
2015-09-09 Paul Kocialkowskiomap-common: SYS_BOOT-based fallback boot device select...
2015-09-09 Paul Kocialkowskiomap-common: Boot device define instead of hardcoded...
2015-09-09 Paul Kocialkowskiomap: SPL boot devices cleanup and completion
2015-09-09 Paul Kocialkowskiomap-common: Common boot code OMAP3 support and cleanup
2015-09-09 Masahiro Yamadakbuild: create symbolic link only for ARM, AVR32, SPARC...
2015-09-09 Vitaly Andrianovkeystone2: add wfi in to the core_spin loop
2015-09-09 Hans de Goedesunxi: ga10h: Enable both otg and regular usb host...
2015-09-09 Hans de Goedesunxi: musb: Stop treating not having a vbus-det gpio...
2015-09-09 Hans de Goedesunxi: musb: Use device-model for musb host mode
2015-09-09 Hans de Goedesunxi: musb: Move musb config and platdata to the sunxi...
2015-09-09 Hans de Goedesunxi: usb-phy: Add support for reading otg id pin...
2015-09-09 Hans de Goedesunxi: Enable CMD_USB and USB_STORAGE by default on...
2015-09-09 Tom Rinisunxi: Update selects in arch/arm/Kconfig for DM conver...
2015-09-09 Hans de Goedesunxi: Remove bogus uart entry from utoo-p66 dts file
2015-09-09 Daniel Kochmańskisunxi: spl: Detect at runtime where SPL was read from
2015-09-09 Daniel Kochmańskisunxi: Create helper function veryfing valid boot signa...
2015-09-09 Stefan Roesearm: mvebu: Add SPL SDIO/MMC boot support
2015-09-09 Masahiro YamadaARM: dts: UniPhier: add I2C ch4 device node for PH1...
2015-09-09 Masahiro YamadaARM: UniPhier: add PH1-sLD3 SoC support
2015-09-09 Masahiro YamadaARM: dts: UniPhier: add device-specific compatible...
2015-09-09 Stefan Roesearm: mvebu: a38x: Use correct PEX register access macros
2015-09-09 Stefan Roesearm: mvebu: drivers/ddr: Move Armada XP DDR init code...
2015-09-09 Stefan Roesearm: mvebu: Add Armada 38x SERDES / PHY init code from...
2015-09-09 Stefan Roesearm: mvebu: serdes: Move Armada XP SERDES / PHY init...
2015-09-09 Stefan Roesearm: mvebu: Disable MMU before changing register base...
2015-09-09 Stefan Roesearm: mvebu: spl.c: Add call to board_early_init_f()
2015-09-09 Stefan Roesearm: mvebu: Use default reg base address for SPL on...
next