]> git.kernelconcepts.de Git - karo-tx-uboot.git/history - board
karo: tx6: change DGCTRL init values depending on SoC type
[karo-tx-uboot.git] / board /
2015-10-20 Lothar Waßmannkaro: tx6: change DGCTRL init values depending on SoC...
2015-10-20 Lothar Waßmannkaro: tx6: add TXUL support
2015-10-19 Lothar Waßmannkaro: tx6: selectively set individual CCGR bits via DCD
2015-10-19 Lothar Waßmannkaro: tx6: eliminate PHYS_SDRAM_1_WIDTH and use CONFIG_...
2015-10-19 Lothar Waßmannkaro: tx6: config.mk cleanup
2015-10-19 Lothar Waßmannkaro: tx6: further cleanups
2015-09-22 Lothar Waßmannkaro: use lldiv() for 64bit division
2015-09-18 Lothar Waßmannkaro: tx6: don't perform DQS gating calibration KARO-TX6-2015-09-18
2015-09-18 Lothar Waßmannkaro: tx6: don't position CSF at fixed offset
2015-09-18 Lothar Waßmannkaro: tx6: remove usesless symbol _image_binary_end
2015-09-17 Lothar Waßmannkaro: cleanup after merge of v2015.10-rc2
2015-09-10 Misha Komarovskiyexynos: Rise ARM voltage to 1.1V for chained bootloaders
2015-09-10 Hans de Goedesunxi: Fix MAINTAINERS board sorting
2015-09-10 Marcus Coopersunxi: Add support for the Olimex A20 EVB
2015-09-10 Hans de Goedesunxi: Add inet98v_rev2 defconfig and dts file
2015-09-10 Hans de Goedesunxi: Add inet97fv2_defconfig
2015-09-10 Hans de Goedesunxi_nand_spl: Rename SPL_NAND_SUNXI to NAND_SUNXI
2015-09-10 Hans de Goedesunxi_nand_spl: Add support for sun4i and sun5i SoCs
2015-09-10 Hans de Goedesunxi_nand_spl: Make sure the DMA controller is enabled
2015-09-10 Hans de Goedesunxi_nand_spl: Use SYS_NAND_SELF_INIT and only do...
2015-09-10 Hans de Goedesunxi: Drop LCD_MODE from A13-OLinuxIno defconfigs
2015-09-10 Hans de Goedesunxi: Add support for gt90h-v4 tablets
2015-09-10 Hans de Goedesunxi: axp221: Allow specifying dcdc2 voltage via Kconfig
2015-09-10 Kishon Vijay Abraham Iboard: ti: invoke clock API to enable and disable clocks
2015-09-10 Kishon Vijay Abraham Iboard: ti: OMAP5: added USB initializtion code
2015-09-10 Kishon Vijay Abraham Iboard: ti: beagle_x15: added USB initializtion code
2015-09-10 Kishon Vijay Abraham Iboard: ti: remove duplicate initialization of vbus_id_s...
2015-09-10 Andreas Bießmannat91sam9260ek: add missing files to MAINTAINERS
2015-09-10 Andreas Bießmannat91sam9rlek: add missing files to MAINTAINERS
2015-09-10 Stefan Roesearm: spear: Fix booting - relocate vector table to...
2015-09-10 Lokesh VutlaARM: k2l: Fix device speeds
2015-09-10 Lokesh VutlaARM: keystone2: Update README
2015-09-10 Lokesh VutlaARM: keystone2: Rename u-boot-nand.gph to MLO
2015-09-10 Nishanth MenonARM: DRA74-evm: Use SMA_1 spare register to workaround...
2015-09-10 Nishanth MenonARM: DRA74-evm: Add iodelay values for SR2.0
2015-09-10 Kun-Hua HuangNDS32: Generic Board Support and Unsupport
2015-09-10 Kun-Hua HuangNDS32: Generic Board Support and Unsupport
2015-09-10 Bin Mengx86: crownbay: Enable on-board SMSC superio keyboard...
2015-09-10 Marek Vasutarm: socfpga: Fix ArriaV SoCDK PLL config
2015-09-10 Marek Vasutarm: socfpga: Fix MAINTAINERS entry for CV/AV SoCDK
2015-09-10 Marek Vasutarm: socfpga: Make the pinmux table const u8
2015-09-10 Marek Vasutarm: socfpga: Switch to filtered QTS files
2015-09-10 Marek Vasutarm: socfpga: Remove AV-specific parts from CV-SoCDK
2015-09-10 Marek Vasutarm: socfpga: Remove CV-specific parts from AV-SoCDK
2015-09-10 Marek Vasutarm: socfpga: Split Altera socfpga into AV and CV SoCDK
2015-09-10 Marek Vasutarm: socfpga: Move wrappers into platform directory
2015-09-10 Wu, JoshARM: at91: sama5d3xek: use a $dtb_name to load dtb
2015-09-10 Erik van Luijkarm: at91: add support for mini-box picosam9g45 board
2015-09-10 Erik van Luijkarm: at91: pmc: replace the constant with a define...
2015-09-10 Erik van Luijkarm: at91: at91sam9m10g45ek/corvus remove useless chip...
2015-09-10 Erik van Luijkarm: at91: mpddr: allow multiple DDR controllers
2015-09-10 Masahiro YamadaARM: davinci: remove support for cam_enc_4xx
2015-09-10 Siva Durga Prasad... zynqmp: usb: Add usb dwc3 driver support for zynqmp
2015-09-10 Siva Durga Prasad... board: Xilinx: zynqmp: Define checkboard() function
2015-09-10 Masahiro Yamadaof: clean up OF_CONTROL ifdef conditionals
2015-09-10 Masahiro Yamadaspl: move SPL driver entries to driver/Makefile
2015-09-10 Stefan Roesearm: mvebu: db-88f6820-gp: Enable PCI support
2015-09-10 Stefan Roesearm: mvebu: db-mv784mp-gp: Enable PCI support
2015-09-10 Stefan Roesearm: mvebu: Enable NAND controller on MVEBU SoC's
2015-09-10 Anatolij Gustschinpowerpc: ipek01: convert to generic board
2015-09-10 Anatolij Gustschinpowerpc: inka4x0: convert to generic board
2015-09-10 Simon Glassx86: Convert minnowmax to use CONFIG_DM_NET
2015-09-10 Stephen Warrencm5200: fix FAT function prototypes
2015-09-10 Hans de Goedesunxi: Display: Add support for eDP panels connected...
2015-09-10 Hans de Goedesunxi: Add support for the Auxtek-T003 HDMI stick
2015-09-10 Marcel Ziswilercolibri_t20: fix reset out pin
2015-09-10 Marcel Ziswilerapalis/colibri_t20/30: clean-up
2015-09-10 Marcel Ziswilercolibri_t20: disable PMIC sleep mode on low supply...
2015-09-10 Marcel Ziswilercolibri_t20: add lcd display support
2015-09-10 Marcel Ziswilerapalis/colibri_t20/t30: integrate recovery mode detection
2015-09-10 Tom Rinidra7xx: Move CONS_INDEX to Kconfig and enable CONFIG_SP...
2015-09-10 Nikita Kiryanovarm: am437x: Introduce new board cm-t43
2015-09-10 Peter GriffinARM64: hikey: Add a README for this board.
2015-09-10 Peter GriffinARM64: hikey: hi6220: Add u-boot support for the 96boar...
2015-09-10 Lokesh VutlaARM: keystone2: Remove unsed external clocks
2015-09-10 Lokesh VutlaARM: keystone2: Cleanup init_pll definition
2015-09-10 Lokesh VutlaARM: keystone2: Fix dev and arm speed detection
2015-09-10 Lokesh VutlaARM: keystone2: Cleanup PLL init code
2015-09-10 Linus Walleijintegrator: switch to DM serial port
2015-09-10 Alexander SteinARM: bcm283x: Allocate all mailbox buffers cacheline...
2015-09-10 Paul Kocialkowskisniper: Keypad support, with recovery and fastboot...
2015-09-10 Paul Kocialkowskisniper: Power off when the power on reason is not a...
2015-09-10 Paul Kocialkowskisniper: Power button reset support
2015-09-10 Paul Kocialkowskisniper: Fastboot support
2015-09-10 Paul Kocialkowskisniper: Pass serial number through ATAG
2015-09-10 Paul Kocialkowskisniper: Serial number support, obtained from die ID
2015-09-10 Paul Kocialkowskisniper: OMAP3 reboot mode support
2015-09-10 Paul KocialkowskiLG Optimus Black (P970) codename sniper support
2015-09-10 Vladimir Zapolskiylpc32xx: devkit3250: add spl build support
2015-09-10 Vladimir Zapolskiylpc32xx: devkit3250: update of board configuration
2015-09-10 Jiandong Zhengarm: bcmcygnus: Enable Ethernet support
2015-09-10 Heiko Schocherarm, at91: support for sam9260 based smartweb board
2015-09-10 Rob HerringARM: highbank: remove DRAM bank setup
2015-09-10 Peng Fanfsl: common: pfuze: no use original pfuze code if DM_PMIC
2015-09-10 Hans de Goedesunxi: display: Add composite video out support
2015-09-10 Karol Gugalasunxi: nand: Add pinmux and clock settings for NAND...
2015-09-10 Dinh Nguyenddr: altera: sequencer: add RW_MGR_MEM_NUMBER_OF_RANKS
2015-09-10 Marek Vasutddr: altera: sequencer: Wrap misc remaining macros
2015-09-10 Marek Vasutddr: altera: sequencer: Wrap IO_* macros
2015-09-10 Marek Vasutddr: altera: sequencer: Wrap RW_MGR_* macros
next