net: fec: use correct sizes to clear and flush descriptors
[karo-tx-uboot.git] / drivers /
2016-04-13 Lothar Waßmannnet: fec: use correct sizes to clear and flush descriptors
2016-02-18 Lothar WaßmannMerge branch 'tx53-update-2016-02-03' into karo-tx6 KARO-TX6-2016-03-10
2016-02-18 Lothar WaßmannMerge branch 'tx28-update-2016-02-03' into karo-tx6
2016-02-18 Lothar WaßmannMerge branch 'tx6-update-2016-02-03' into karo-tx6
2016-02-04 Lothar Waßmannnet: fec_mxc: exempt already found PHYs from being...
2016-02-04 Lothar Waßmannnet: fec_mxc: make base_mii configurable
2015-11-26 Lothar WaßmannARM: imx6ul: add support for mxsfb on i.MX6UL
2015-10-26 Lothar WaßmannMerge branch 'tx28-bugfix' into karo-devel
2015-10-26 Lothar WaßmannMerge branch 'tx51-bugfix' into karo-devel
2015-10-23 Lothar Waßmannvideo: ipu: initialize g_ipu_clk, g_ldb_clk statically KARO-TX6UL-2015-10-23
2015-10-22 Lothar Waßmannnand: mxs: convey return code from failed function...
2015-10-22 Lothar Waßmannnand: mxs: make fake_ecc_layout static
2015-10-22 Lothar Waßmannnand: mxs: use CONFIG_ARCH_MX6 instead of CONFIG_SOC_MX6Q
2015-10-19 Lothar Waßmannarm: mx6: use imx6_thermal driver
2015-10-12 Lothar Waßmannarm: mxs: ocotp: disable OCOTP clock after access is...
2015-10-12 Lothar Waßmannkconfig: arm: move ARCH_MX? out of choice which selects...
2015-10-12 Lothar Waßmanndma: apbh: let APBH_DMA be selected, instead of enablin...
2015-10-12 Lothar Waßmannnet: fec_mxc: move CONFIG_FEC_MXC_PHYADDR from Kconfig...
2015-10-09 Lothar Waßmannkconfig: remove redundant 'default n'
2015-10-09 Lothar Waßmannnet: fec_mxc: use some more appropriate return values
2015-10-09 Lothar Waßmannnet: fec_mxc: consolidate data types and remove useless...
2015-10-09 Lothar Waßmannnet: fec_mxc: don't write to reserved register on i...
2015-10-09 Lothar Waßmannnet: fec_mxc: don't try to clear read-only registers
2015-10-09 Lothar Waßmannnet: fec_mxc: use a definite delay when waiting for...
2015-10-09 Lothar Waßmannnet: fec_mxc: autodetect PHY address if phy_id < 0
2015-10-09 Lothar WaßmannRevert "video: ipu_disp: Fix clock polarity logic"
2015-09-22 Lothar Waßmannkaro: use lldiv() for 64bit division
2015-09-17 Lothar Waßmannkaro: cleanup after merge of v2015.10-rc2
2015-09-10 Masahiro Yamadapinctrl: sandbox: add sandbox pinctrl driver
2015-09-10 Masahiro Yamadapinctrl: add pin control uclass support
2015-09-10 Masahiro Yamadadm: core: allow device_bind() to not return a device...
2015-09-10 Simon Glassdm: tpm: Convert LPC driver to driver model
2015-09-10 Simon Glassdm: tpm: Convert I2C driver to driver model
2015-09-10 Simon Glassdm: tpm: sandbox: Convert TPM driver to driver model
2015-09-10 Simon Glassdm: tpm: Add a uclass for Trusted Platform Modules
2015-09-10 Simon Glasstpm: tpm_tis_i2c: Tidy up delays
2015-09-10 Simon Glasstpm: tpm_tis_i2c: Use a consistent tpm_tis_i2c_ prefix
2015-09-10 Simon Glasstpm: tpm_tis_i2c: Simplify init code
2015-09-10 Simon Glasstpm: tpm_tis_i2c: Move definitions into the header...
2015-09-10 Simon Glasstpm: tpm_tis_i2c: Merge struct tpm into tpm_chip
2015-09-10 Simon Glasstpm: tpm_tis_i2c: Merge struct tpm_dev into tpm_chip
2015-09-10 Simon Glasstpm: tpm_tis_i2c: Drop struct tpm_vendor_specific
2015-09-10 Simon Glasstpm: tpm_tis_i2c: Drop unnecessary methods
2015-09-10 Simon Glasstpm: Move the I2C TPM code into one file
2015-09-10 Simon Glasstpm: Convert drivers to use SPDX
2015-09-10 Simon Glasstpm: Add Kconfig options for TPMs
2015-09-10 Simon Glasstpm: Remove old pre-driver-model I2C code
2015-09-10 Bin Mengdrivers: kconfig: Sort driver menu in alphabetical...
2015-09-10 Bin Mengdrivers: kconfig: Move PHYS_TO_BUS to "Device Drivers...
2015-09-10 Bin Mengdrivers: kconfig: Move "Generic Driver Options" menu...
2015-09-10 Marek Vasutdm: core: Add Kconfig for simple bus driver
2015-09-10 Simon Glassdm: Use dev_get_addr() where possible
2015-09-10 Yousong Zhousunxi: mmc: set transfer timeout according to byte_cnt.
2015-09-10 Hans de Goedemtd: nand: Make CONFIG_SYS_NAND_U_BOOT_OFFS configurabl...
2015-09-10 Boris Brezillonsunxi_nand_spl: clear status flags in SPL implementation
2015-09-10 Hans de Goedesunxi_nand_spl: Remove NAND_SUNXI_SPL_SYNDROME_PARTITIO...
2015-09-10 Hans de Goedesunxi_nand_spl: Rename SPL_NAND_SUNXI to NAND_SUNXI
2015-09-10 Hans de Goedesunxi_nand_spl: Add support for backup boot partitions
2015-09-10 Hans de Goedesunxi_nand_spl: Auto detect nand configuration parameters
2015-09-10 Hans de Goedesunxi_nand_spl: Parametrize lowlevel read functions
2015-09-10 Hans de Goedesunxi_nand_spl: Properly config page-size in the nand...
2015-09-10 Hans de Goedesunxi_nand_spl: Add support for sun4i and sun5i SoCs
2015-09-10 Hans de Goedesunxi_nand_spl: Use kernel driver algorithm for determi...
2015-09-10 Hans de Goedesunxi_nand_spl: Add proper cache flusing
2015-09-10 Hans de Goedesunxi_nand_spl: Turn off clocks when we're done with...
2015-09-10 Hans de Goedesunxi_nand_spl: Use SYS_NAND_SELF_INIT and only do...
2015-09-10 Hans de Goedesunxi_nand_spl: Do not bother writing the spare-area...
2015-09-10 Hans de Goedesunxi_nand_spl: We only need to reset the nand chip...
2015-09-10 Hans de Goedesunxi_nand_spl: Drop unnecessary temp buf
2015-09-10 Hans de Goedesunxi: musb: Drop no longer accurate comment in Kconfig...
2015-09-10 Hans de Goedesunxi: axp221: Allow specifying dcdc2 voltage via Kconfig
2015-09-10 Peng Fanvideo: discard empty video_set_lut implementation
2015-09-10 Masahiro Yamadaserial: uniphier: drop platform data support
2015-09-10 Masahiro Yamadamtd: denali_spl: do not allocate page_buffer in .bss...
2015-09-10 Kishon Vijay Abraham ITI PHY: Add support to control 2nd USB PHY in DRA7xx...
2015-09-10 Kishon Vijay Abraham Iusb: dwc3: dwc3-omap: Use the clear register inorder...
2015-09-10 Marcel Ziswilermtd/nand/ubi: assortment of alignment fixes
2015-09-10 Bin Mengdm: core: Fix code reentrancy issue in device_probe_child()
2015-09-10 Bin Mengdm: pci: Optimize pci_uclass_post_bind()
2015-09-10 Bin Mengvideo: ct69000: Remove unused codes
2015-09-10 Bin Mengvideo: cfb_console: Allow VGA device to work without...
2015-09-10 Bin Mengx86: i8042: Correctly initialize the controller
2015-09-10 Bin Mengx86: i8042: Clean up the driver per coding convention
2015-09-10 Bin Mengx86: i8042: Reorder static functions
2015-09-10 Bin Mengx86: i8042: Remove unused codes
2015-09-10 Simon Glassx86: gpio: Tidy up gpio_ich6_get_base() and callers
2015-09-10 Simon Glassx86: gpio: Correct calls to _ich6_gpio_set_direction()
2015-09-10 Bin Mengdm: pci: Save devfn without bus number in pci_uclass_ch...
2015-09-10 Bin Mengx86: superio: Add keyboard controller support to smsc_l...
2015-09-10 Bin Mengx86: fsp: Call fsp_init_phase_pci() in pci_uclass_post_...
2015-09-10 Bin Mengdm: pci: Support selected device/driver binding before...
2015-09-10 Bin Mengx86: Set up video framebuffer for coreboot before loadi...
2015-09-10 Bin Mengvideo: coreboot: Save VESA mode for future use
2015-09-10 Bin Mengnet: e1000: Fix build warnings for 32-bit
2015-09-10 Peng Fanmtd: nand: mxs invalidate dcache before DMA read
2015-09-10 Peng Fanmtd: nand: mxs support oobsize bigger than 512
2015-09-10 Stefan Roesemtd: nand: Add mvebu (PXA / AXP / A38x) NAND device...
2015-09-10 Scott Woodnand: Sync with Linux v4.1
2015-09-10 Ezequiel Garciamtd: Introduce mtd_block_isreserved()
2015-09-10 Scott Woodnand: Remove __UBOOT__ ifdefs
next