karo-tx-uboot.git
3 years agofs/fs.c: correctly interpret the '(max)len' parameter to fs_read()
Lothar Waßmann [Wed, 29 Jun 2016 09:06:58 +0000 (11:06 +0200)]
fs/fs.c: correctly interpret the '(max)len' parameter to fs_read()

The 'len' parameter passed to fs_read() actually denotes the maximum
number of bytes that fit into the callers buffer, not an expected
amount of data to be read.
Rename the parameter accordingly and honor the maxlen requested by the
caller appropriately.
Also remove the bogus warning message printed when the number of bytes
read is smaller than maxlen.

3 years agocmd_gpio.c: adjust help message depending on gpio_status being compiled in or not
Lothar Waßmann [Wed, 29 Jun 2016 08:52:53 +0000 (10:52 +0200)]
cmd_gpio.c: adjust help message depending on gpio_status being compiled in or not

3 years agocommon/cmd_mtdparts.c: print ECC stats along with partition information
Lothar Waßmann [Wed, 29 Jun 2016 08:51:31 +0000 (10:51 +0200)]
common/cmd_mtdparts.c: print ECC stats along with partition information

3 years agocommon/cmd_mtdparts.c: use proper return values for U-Boot command functions
Lothar Waßmann [Wed, 29 Jun 2016 08:50:13 +0000 (10:50 +0200)]
common/cmd_mtdparts.c: use proper return values for U-Boot command functions

3 years agocommon/cmd_misc.c: fix return code of sleep command
Lothar Waßmann [Wed, 29 Jun 2016 08:46:49 +0000 (10:46 +0200)]
common/cmd_misc.c: fix return code of sleep command

-1 is equivalent to CMD_RET_USAGE and makes the sleep command print
its usage information when aborted by <CTRL-C> which is most probably
not intended.

3 years agokaro: tx6ul: disable the PMIC for '_noenv' U-Boot KARO-TX6-2016-04-26
Lothar Waßmann [Tue, 26 Apr 2016 13:33:34 +0000 (15:33 +0200)]
karo: tx6ul: disable the PMIC for '_noenv' U-Boot

The I2C access to the PMIC requires the TAMPER pins of the i.MX6UL to
be useable as GPIOs. This is only possible after the TAMPER_PIN_DISABLE
fuses are programmed which is usually done via U-Boot.
Resolve this catch 22 situation by disabling the PMIC in the '_noenv'
U-Boot variant which is usually used in the manufacturing
environment.

3 years agokaro: tx6ul: make board string dependent on cpurev
Lothar Waßmann [Tue, 26 Apr 2016 13:30:56 +0000 (15:30 +0200)]
karo: tx6ul: make board string dependent on cpurev

3 years agomx6: clock: use setup_gpmi_io_clk() to change nfc clk divider for CONFIG_NAND_MXS
Lothar Waßmann [Tue, 26 Apr 2016 13:29:48 +0000 (15:29 +0200)]
mx6: clock: use setup_gpmi_io_clk() to change nfc clk divider for CONFIG_NAND_MXS

3 years agomx6: clock: fix integer overflow in calculation of relative error in set_nfc_clk()
Lothar Waßmann [Tue, 26 Apr 2016 13:20:19 +0000 (15:20 +0200)]
mx6: clock: fix integer overflow in calculation of relative error in set_nfc_clk()

3 years agomx6: ocotp: add timeout to busy wait loop
Lothar Waßmann [Tue, 26 Apr 2016 13:19:20 +0000 (15:19 +0200)]
mx6: ocotp: add timeout to busy wait loop

3 years agokaro: tx6: pmic: print PMIC name in boot messages
Lothar Waßmann [Tue, 26 Apr 2016 13:16:57 +0000 (15:16 +0200)]
karo: tx6: pmic: print PMIC name in boot messages

3 years agoarm: mx6: fix NFC clock get/set routines for i.MX6QP,i.MX6UL tx6qp-devel
Lothar Waßmann [Tue, 19 Apr 2016 14:07:37 +0000 (16:07 +0200)]
arm: mx6: fix NFC clock get/set routines for i.MX6QP,i.MX6UL

3 years agokaro: tx6: add support for TX6Q-8037 (i.MX6QP)
Lothar Waßmann [Mon, 18 Apr 2016 12:45:01 +0000 (14:45 +0200)]
karo: tx6: add support for TX6Q-8037 (i.MX6QP)

3 years agokaro: tx6: add support for boards with >= 2GiB memory
Lothar Waßmann [Mon, 18 Apr 2016 12:43:29 +0000 (14:43 +0200)]
karo: tx6: add support for boards with >= 2GiB memory

3 years agokaro: tx6: disable gpmi clk before changing podf and clk_sel
Lothar Waßmann [Mon, 18 Apr 2016 12:42:17 +0000 (14:42 +0200)]
karo: tx6: disable gpmi clk before changing podf and clk_sel

3 years agokaro: tx6: replace open coded interpretation of cpurev by calls to is_cpu_type()
Lothar Waßmann [Mon, 18 Apr 2016 07:43:23 +0000 (09:43 +0200)]
karo: tx6: replace open coded interpretation of cpurev by calls to is_cpu_type()

3 years agokaro: tx6: set LCD x, y dimensions to 0 when disabling LCD
Lothar Waßmann [Mon, 18 Apr 2016 07:33:43 +0000 (09:33 +0200)]
karo: tx6: set LCD x, y dimensions to 0 when disabling LCD

Even when the LCD is disabled, the LCD framework will still clear the
video memory. This can take a cosiderable amount of time for the
maximum resolution of 16MiB that the i.MX6 supports.

Setting vl_row and vl_col to 0 results in a zero sized framebuffer
to avoid this unnecessary delay.

3 years agokaro: tx6: rename CONFIG_SYS_BOOT_CMD_NAND to FDTSAVE_CMD_STR
Lothar Waßmann [Mon, 18 Apr 2016 07:30:59 +0000 (09:30 +0200)]
karo: tx6: rename CONFIG_SYS_BOOT_CMD_NAND to FDTSAVE_CMD_STR

This macro in not actually a configurable setting as the original
naming suggests.

3 years agomx6: clock: take 'num' and 'denom' regs into account when calculating audio/video...
Lothar Waßmann [Wed, 13 Apr 2016 10:03:10 +0000 (12:03 +0200)]
mx6: clock: take 'num' and 'denom' regs into account when calculating audio/video PLL frequency

3 years agonet: fec: use correct sizes to clear and flush descriptors
Lothar Waßmann [Wed, 13 Apr 2016 10:00:52 +0000 (12:00 +0200)]
net: fec: use correct sizes to clear and flush descriptors

3 years agorename TX6Q-1033 to TX6Q-1036
Lothar Waßmann [Wed, 13 Apr 2016 09:17:12 +0000 (11:17 +0200)]
rename TX6Q-1033 to TX6Q-1036

4 years agoMerge branch 'tx53-update-2016-02-03' into karo-tx6 KARO-TX6-2016-03-10
Lothar Waßmann [Thu, 18 Feb 2016 17:38:00 +0000 (18:38 +0100)]
Merge branch 'tx53-update-2016-02-03' into karo-tx6

4 years agoMerge branch 'tx28-update-2016-02-03' into karo-tx6
Lothar Waßmann [Thu, 18 Feb 2016 17:37:47 +0000 (18:37 +0100)]
Merge branch 'tx28-update-2016-02-03' into karo-tx6

4 years agoMerge branch 'tx6-update-2016-02-03' into karo-tx6
Lothar Waßmann [Thu, 18 Feb 2016 17:37:33 +0000 (18:37 +0100)]
Merge branch 'tx6-update-2016-02-03' into karo-tx6

4 years agokaro: tx6ul: fix bogus GPIO numbers
Lothar Waßmann [Thu, 18 Feb 2016 17:36:01 +0000 (18:36 +0100)]
karo: tx6ul: fix bogus GPIO numbers

4 years agokaro: tx6ul: add pad settings for FT5x06 and USB pads on STK5
Lothar Waßmann [Thu, 18 Feb 2016 17:35:38 +0000 (18:35 +0100)]
karo: tx6ul: add pad settings for FT5x06 and USB pads on STK5

4 years agokaro: tx6ul: add support for TX6UL Mainboard (v1)
Lothar Waßmann [Thu, 18 Feb 2016 17:34:32 +0000 (18:34 +0100)]
karo: tx6ul: add support for TX6UL Mainboard (v1)

4 years agokaro: tx6ul: defer mmc probing until environment has been loaded
Lothar Waßmann [Thu, 18 Feb 2016 17:30:19 +0000 (18:30 +0100)]
karo: tx6ul: defer mmc probing until environment has been loaded

Check the 'baseboard' environment variable before initializing the MMC
interface to prevent error messages on TX6UL-Mainboard which doesn't
support MMC mass storage.

4 years agokaro: tx6ul: proper initialize second FEC if available
Lothar Waßmann [Thu, 18 Feb 2016 17:29:21 +0000 (18:29 +0100)]
karo: tx6ul: proper initialize second FEC if available

4 years agokaro: tx6ul: reorder functions to better follow which ones are called with the defaul...
Lothar Waßmann [Thu, 18 Feb 2016 17:27:36 +0000 (18:27 +0100)]
karo: tx6ul: reorder functions to better follow which ones are called with the default resp. loaded environment

4 years agokaro: tx6: check ctrlc before returning error code for unsupported baseboard
Lothar Waßmann [Thu, 18 Feb 2016 17:18:43 +0000 (18:18 +0100)]
karo: tx6: check ctrlc before returning error code for unsupported baseboard

4 years agokaro: tx53: check ctrlc before returning error code for unsupported baseboard
Lothar Waßmann [Thu, 18 Feb 2016 17:17:01 +0000 (18:17 +0100)]
karo: tx53: check ctrlc before returning error code for unsupported baseboard

4 years agokaro: tx53: don't return non-zero return value in board_init() upon CTRL-C detection
Lothar Waßmann [Thu, 18 Feb 2016 17:16:23 +0000 (18:16 +0100)]
karo: tx53: don't return non-zero return value in board_init() upon CTRL-C detection

4 years agokaro: tx6ul: make show_activity() bail out on GPIO error
Lothar Waßmann [Thu, 18 Feb 2016 16:58:57 +0000 (17:58 +0100)]
karo: tx6ul: make show_activity() bail out on GPIO error

4 years agokaro: tx6ul: indentation fixes
Lothar Waßmann [Thu, 18 Feb 2016 16:57:57 +0000 (17:57 +0100)]
karo: tx6ul: indentation fixes

4 years agokaro: tx6: don't write u-boot image with WITH_DROP_FFS
Lothar Waßmann [Thu, 18 Feb 2016 16:23:58 +0000 (17:23 +0100)]
karo: tx6: don't write u-boot image with WITH_DROP_FFS

4 years agokaro: tx53: don't write u-boot image with WITH_DROP_FFS
Lothar Waßmann [Thu, 18 Feb 2016 15:22:15 +0000 (16:22 +0100)]
karo: tx53: don't write u-boot image with WITH_DROP_FFS

4 years agokaro: tx28: set CONFIG_ENV_OVERWRITE also for NAND environment
Lothar Waßmann [Thu, 11 Feb 2016 12:02:36 +0000 (13:02 +0100)]
karo: tx28: set CONFIG_ENV_OVERWRITE also for NAND environment

4 years agokaro: tx28: fix prototype of video_hw_init()
Lothar Waßmann [Thu, 11 Feb 2016 12:02:28 +0000 (13:02 +0100)]
karo: tx28: fix prototype of video_hw_init()

4 years agokaro: tx28: check ctrlc before returning error code for unsupported baseboard
Lothar Waßmann [Thu, 11 Feb 2016 12:02:21 +0000 (13:02 +0100)]
karo: tx28: check ctrlc before returning error code for unsupported baseboard

4 years agokaro: tx28: don't return non-zero return value in board_init() upon CTRL-C detection
Lothar Waßmann [Thu, 11 Feb 2016 12:02:04 +0000 (13:02 +0100)]
karo: tx28: don't return non-zero return value in board_init() upon CTRL-C detection

4 years agokaro: tx28: don't write u-boot image with WITH_DROP_FFS
Lothar Waßmann [Thu, 11 Feb 2016 11:26:02 +0000 (12:26 +0100)]
karo: tx28: don't write u-boot image with WITH_DROP_FFS

4 years agokaro: tx6ul: fix ENET2_TX_CLK pad settings
Lothar Waßmann [Thu, 4 Feb 2016 12:48:54 +0000 (13:48 +0100)]
karo: tx6ul: fix ENET2_TX_CLK pad settings

4 years agokaro: remove redundant cmap entry in panel_info
Lothar Waßmann [Thu, 4 Feb 2016 11:13:35 +0000 (12:13 +0100)]
karo: remove redundant cmap entry in panel_info

4 years agonet: fec_mxc: exempt already found PHYs from being probed again
Lothar Waßmann [Thu, 4 Feb 2016 11:12:19 +0000 (12:12 +0100)]
net: fec_mxc: exempt already found PHYs from being probed again

4 years agonet: fec_mxc: make base_mii configurable
Lothar Waßmann [Thu, 4 Feb 2016 11:11:38 +0000 (12:11 +0100)]
net: fec_mxc: make base_mii configurable

4 years agolcd: properly display bitmaps > 8bpp
Lothar Waßmann [Thu, 4 Feb 2016 11:01:35 +0000 (12:01 +0100)]
lcd: properly display bitmaps > 8bpp

4 years agolcd: support corner cases for splashpos
Lothar Waßmann [Thu, 4 Feb 2016 11:00:58 +0000 (12:00 +0100)]
lcd: support corner cases for splashpos

4 years agolcd: fix integer overflow in calculation of number of colors
Lothar Waßmann [Wed, 3 Feb 2016 06:16:20 +0000 (07:16 +0100)]
lcd: fix integer overflow in calculation of number of colors

4 years agolcd: fix typo CONFIG_BMP_24BMP -> CONFIG_BMP_24BPP
Lothar Waßmann [Wed, 3 Feb 2016 06:05:48 +0000 (07:05 +0100)]
lcd: fix typo CONFIG_BMP_24BMP -> CONFIG_BMP_24BPP

4 years agokaro: tx6ul: set VIDEO_PLL to 648MHz by default karo-tx6 KARO-TX6UL-2015-11-30
Lothar Waßmann [Thu, 26 Nov 2015 14:37:48 +0000 (15:37 +0100)]
karo: tx6ul: set VIDEO_PLL to 648MHz by default

4 years agokaro: tx6ul: fix ENFC_CLK_SEL bitmask
Lothar Waßmann [Thu, 26 Nov 2015 14:34:30 +0000 (15:34 +0100)]
karo: tx6ul: fix ENFC_CLK_SEL bitmask

On i.MX6UL the bitmask for ENFC_CLK_SEL in CS2CDR is different from the other
i.MX6 variants.

4 years agoARM: imx6ul: add support for mxsfb on i.MX6UL
Lothar Waßmann [Thu, 26 Nov 2015 14:33:58 +0000 (15:33 +0100)]
ARM: imx6ul: add support for mxsfb on i.MX6UL

4 years agoARM: imx6: clocks: add support for eLCDIF clock on i.MX6UL
Lothar Waßmann [Thu, 26 Nov 2015 14:31:34 +0000 (15:31 +0100)]
ARM: imx6: clocks: add support for eLCDIF clock on i.MX6UL

4 years agoARM: imx6: clocks: remove function local definitions of mxc_ccm_reg and anatop_regs
Lothar Waßmann [Thu, 26 Nov 2015 14:31:02 +0000 (15:31 +0100)]
ARM: imx6: clocks: remove function local definitions of mxc_ccm_reg and anatop_regs

4 years agoimx6: rename ANADIG_PLL_AUDIO_TEST_DIV to ANADIG_PLL_AUDIO_POST_DIV
Lothar Waßmann [Thu, 26 Nov 2015 14:30:00 +0000 (15:30 +0100)]
imx6: rename ANADIG_PLL_AUDIO_TEST_DIV to ANADIG_PLL_AUDIO_POST_DIV

4 years agokaro: tx6: enable CONFIG_BMP_*BPP to make splashscreen functional again
Lothar Waßmann [Thu, 26 Nov 2015 13:07:39 +0000 (14:07 +0100)]
karo: tx6: enable CONFIG_BMP_*BPP to make splashscreen functional again

4 years agokaro: tx6: rework PMIC code to allow for different configs for same chip
Lothar Waßmann [Thu, 26 Nov 2015 13:06:28 +0000 (14:06 +0100)]
karo: tx6: rework PMIC code to allow for different configs for same chip

4 years agokaro: tx6ul: enable soft_i2c for PMIC access
Lothar Waßmann [Thu, 26 Nov 2015 13:05:17 +0000 (14:05 +0100)]
karo: tx6ul: enable soft_i2c for PMIC access

4 years agokaro: tx6: set TX6_REV=0x1 where appropriate to eliminate code for unused PMIC chips
Lothar Waßmann [Thu, 26 Nov 2015 13:00:18 +0000 (14:00 +0100)]
karo: tx6: set TX6_REV=0x1 where appropriate to eliminate code for unused PMIC chips

4 years agokaro: tx6ul: fix max. dimensions of framebuffer
Lothar Waßmann [Thu, 26 Nov 2015 12:59:22 +0000 (13:59 +0100)]
karo: tx6ul: fix max. dimensions of framebuffer

4 years agokaro: tx6: disable LCD in '_noenv' config
Lothar Waßmann [Mon, 16 Nov 2015 07:57:32 +0000 (08:57 +0100)]
karo: tx6: disable LCD in '_noenv' config

4 years agokaro: tx6: remove secure_boot fuse override which is a leftover from secure boot...
Lothar Waßmann [Mon, 16 Nov 2015 07:56:32 +0000 (08:56 +0100)]
karo: tx6: remove secure_boot fuse override which is a leftover from secure boot tests

4 years agoMerge branch 'tx48-devel' into karo-devel
Lothar Waßmann [Mon, 26 Oct 2015 13:46:20 +0000 (14:46 +0100)]
Merge branch 'tx48-devel' into karo-devel

4 years agoMerge branch 'tx28-devel' into karo-devel
Lothar Waßmann [Mon, 26 Oct 2015 13:44:47 +0000 (14:44 +0100)]
Merge branch 'tx28-devel' into karo-devel

4 years agokaro: tx28: Kconfig: select CMD_ROMUPDATE for TX28 modules
Lothar Waßmann [Mon, 26 Oct 2015 13:19:48 +0000 (14:19 +0100)]
karo: tx28: Kconfig: select CMD_ROMUPDATE for TX28 modules

4 years agoMerge branch 'tx28-bugfix' into karo-devel
Lothar Waßmann [Mon, 26 Oct 2015 13:14:47 +0000 (14:14 +0100)]
Merge branch 'tx28-bugfix' into karo-devel

4 years agoMerge branch 'tx51-bugfix' into karo-devel
Lothar Waßmann [Mon, 26 Oct 2015 13:14:36 +0000 (14:14 +0100)]
Merge branch 'tx51-bugfix' into karo-devel

4 years agotools: elftosb: use g++ to compile elftosb to prevent link error due to missing libm
Lothar Waßmann [Mon, 26 Oct 2015 11:41:39 +0000 (12:41 +0100)]
tools: elftosb: use g++ to compile elftosb to prevent link error due to missing libm

4 years agotools: elftosb: makefile indentation and whitespace cleanup
Lothar Waßmann [Mon, 26 Oct 2015 11:40:59 +0000 (12:40 +0100)]
tools: elftosb: makefile indentation and whitespace cleanup

4 years agokaro: tx48: fix build error "undefined reference to `mmc_legacy_init'"
Lothar Waßmann [Mon, 26 Oct 2015 11:23:28 +0000 (12:23 +0100)]
karo: tx48: fix build error "undefined reference to `mmc_legacy_init'"

4 years agokaro: fdt: prevent duplicate call of fdt_fixup_ethernet()
Lothar Waßmann [Mon, 26 Oct 2015 11:15:08 +0000 (12:15 +0100)]
karo: fdt: prevent duplicate call of fdt_fixup_ethernet()

fdt_fixup_ethernet() is already called internally
by boot_prep_linux(). Remove the calls to it in ft_board_setup().

4 years agovideo: ipu: initialize g_ipu_clk, g_ldb_clk statically KARO-TX6UL-2015-10-23
Lothar Waßmann [Fri, 23 Oct 2015 10:46:03 +0000 (12:46 +0200)]
video: ipu: initialize g_ipu_clk, g_ldb_clk statically

When the FB driver has not been initialized, booting Linux will hang
the system when ipuv3_fb_shutdown() is called from arch_preboot_os()
because clk_enable(g_ipu_clk) is a NOP with g_ipu_clk == NULL.
There is no need to initialize these variables at runtime, so use
static initialization to prevent this problem.

4 years agoarm: mx6: fix the AIPS?_BASE_ADDR fsckup introduced by commit f5def95698f6
Lothar Waßmann [Thu, 22 Oct 2015 13:04:44 +0000 (15:04 +0200)]
arm: mx6: fix the AIPS?_BASE_ADDR fsckup introduced by commit f5def95698f6

commit f5def95698f6f3d8923f0e38706e3e5ebed81a10 ("imx: mx6: Fixed AIPS3 base address issue")
claimed to fix an AIPS3 base address issue, while it in fact messed up
the AIPS1 and AIPS2 base addresses too.

4 years agokaro: tx6: adapt romupdate command for i.MX6UL
Lothar Waßmann [Thu, 22 Oct 2015 09:28:29 +0000 (11:28 +0200)]
karo: tx6: adapt romupdate command for i.MX6UL

4 years agokaro: tx6: remove unused code from flash.c
Lothar Waßmann [Thu, 22 Oct 2015 09:28:05 +0000 (11:28 +0200)]
karo: tx6: remove unused code from flash.c

4 years agonand: mxs: convey return code from failed function rather than '0' in mxs_nand_ecc_wr...
Lothar Waßmann [Thu, 22 Oct 2015 09:27:22 +0000 (11:27 +0200)]
nand: mxs: convey return code from failed function rather than '0' in mxs_nand_ecc_write_page()

4 years agonand: mxs: make fake_ecc_layout static
Lothar Waßmann [Thu, 22 Oct 2015 09:26:36 +0000 (11:26 +0200)]
nand: mxs: make fake_ecc_layout static

4 years agonand: mxs: use CONFIG_ARCH_MX6 instead of CONFIG_SOC_MX6Q
Lothar Waßmann [Thu, 22 Oct 2015 09:26:22 +0000 (11:26 +0200)]
nand: mxs: use CONFIG_ARCH_MX6 instead of CONFIG_SOC_MX6Q

4 years agokaro: tx6ul: disable PMIC init
Lothar Waßmann [Tue, 20 Oct 2015 11:35:50 +0000 (13:35 +0200)]
karo: tx6ul: disable PMIC init

The I2C-GPIO driver requires configuration via DTB which is not
currently supported for Ka-Ro modules. So, disable the PMIC access for
now.

4 years agokaro: tx6: change DGCTRL init values depending on SoC type
Lothar Waßmann [Tue, 20 Oct 2015 11:28:03 +0000 (13:28 +0200)]
karo: tx6: change DGCTRL init values depending on SoC type

4 years agokaro: tx6: add TXUL support
Lothar Waßmann [Tue, 20 Oct 2015 11:27:51 +0000 (13:27 +0200)]
karo: tx6: add TXUL support

4 years agokaro: tx6: selectively set individual CCGR bits via DCD
Lothar Waßmann [Mon, 19 Oct 2015 11:49:04 +0000 (13:49 +0200)]
karo: tx6: selectively set individual CCGR bits via DCD

4 years agokaro: tx6: eliminate PHYS_SDRAM_1_WIDTH and use CONFIG_SYS_SDRAM_BUS_WIDTH instead
Lothar Waßmann [Mon, 19 Oct 2015 10:42:42 +0000 (12:42 +0200)]
karo: tx6: eliminate PHYS_SDRAM_1_WIDTH and use CONFIG_SYS_SDRAM_BUS_WIDTH instead

4 years agokaro: tx6: config.mk cleanup
Lothar Waßmann [Mon, 19 Oct 2015 10:37:29 +0000 (12:37 +0200)]
karo: tx6: config.mk cleanup

4 years agokaro: tx6: further cleanups
Lothar Waßmann [Mon, 19 Oct 2015 10:36:46 +0000 (12:36 +0200)]
karo: tx6: further cleanups

4 years agoarm: mx6: use imx6_thermal driver
Lothar Waßmann [Mon, 19 Oct 2015 10:28:12 +0000 (12:28 +0200)]
arm: mx6: use imx6_thermal driver

4 years agoarm: mx6: use fuse_read() for OCOTP fuse access
Lothar Waßmann [Mon, 19 Oct 2015 10:27:05 +0000 (12:27 +0200)]
arm: mx6: use fuse_read() for OCOTP fuse access

4 years agoarm: mxs: ocotp: disable OCOTP clock after access is finished
Lothar Waßmann [Mon, 12 Oct 2015 12:04:28 +0000 (14:04 +0200)]
arm: mxs: ocotp: disable OCOTP clock after access is finished

4 years agoremove obsolete functions ocotp_clk_{en,dis}able
Lothar Waßmann [Mon, 12 Oct 2015 09:28:33 +0000 (11:28 +0200)]
remove obsolete functions ocotp_clk_{en,dis}able

4 years agokconfig: arm: remove duplicate definitions of SOC_MX*
Lothar Waßmann [Mon, 12 Oct 2015 12:02:36 +0000 (14:02 +0200)]
kconfig: arm: remove duplicate definitions of SOC_MX*

4 years agokconfig: arm: move ARCH_MX? out of choice which selects TARGETs that depend on those
Lothar Waßmann [Mon, 12 Oct 2015 12:01:23 +0000 (14:01 +0200)]
kconfig: arm: move ARCH_MX? out of choice which selects TARGETs that depend on those

4 years agokconfig: arm: make cache configurable via Kconfig
Lothar Waßmann [Mon, 12 Oct 2015 08:42:36 +0000 (10:42 +0200)]
kconfig: arm: make cache configurable via Kconfig

4 years agoarm: mx6: remove CONFIG_ macros that are now included in Kconfig from header file
Lothar Waßmann [Mon, 12 Oct 2015 08:41:54 +0000 (10:41 +0200)]
arm: mx6: remove CONFIG_ macros that are now included in Kconfig from header file

4 years agoarm: mx6: rename some missed instances of CONFIG_MX6* to CONFIG_SOC_MX6*
Lothar Waßmann [Mon, 12 Oct 2015 08:40:51 +0000 (10:40 +0200)]
arm: mx6: rename some missed instances of CONFIG_MX6* to CONFIG_SOC_MX6*

4 years agodma: apbh: let APBH_DMA be selected, instead of enabling it by default
Lothar Waßmann [Mon, 12 Oct 2015 08:37:22 +0000 (10:37 +0200)]
dma: apbh: let APBH_DMA be selected, instead of enabling it by default

4 years agonet: fec_mxc: move CONFIG_FEC_MXC_PHYADDR from Kconfig to include/configs/*.h
Lothar Waßmann [Mon, 12 Oct 2015 08:21:52 +0000 (10:21 +0200)]
net: fec_mxc: move CONFIG_FEC_MXC_PHYADDR from Kconfig to include/configs/*.h

4 years agoarm: imx: prevent build error when CONFIG_FEC_MXC_PHYADDR is undefined
Lothar Waßmann [Mon, 12 Oct 2015 08:15:31 +0000 (10:15 +0200)]
arm: imx: prevent build error when CONFIG_FEC_MXC_PHYADDR is undefined

4 years agoimx: remove duplicated prototype for fecmxc_initialize() which is already defined...
Lothar Waßmann [Fri, 9 Oct 2015 10:32:18 +0000 (12:32 +0200)]
imx: remove duplicated prototype for fecmxc_initialize() which is already defined in include/netdev.h

4 years agokconfig: remove redundant 'default n'
Lothar Waßmann [Fri, 9 Oct 2015 09:45:53 +0000 (11:45 +0200)]
kconfig: remove redundant 'default n'