karo-tx-uboot.git
3 years agokaro: tx6ul: disable the PMIC for '_noenv' U-Boot KARO-TX6-2016-04-26
Lothar Waßmann [Tue, 26 Apr 2016 13:33:34 +0000 (15:33 +0200)]
karo: tx6ul: disable the PMIC for '_noenv' U-Boot

The I2C access to the PMIC requires the TAMPER pins of the i.MX6UL to
be useable as GPIOs. This is only possible after the TAMPER_PIN_DISABLE
fuses are programmed which is usually done via U-Boot.
Resolve this catch 22 situation by disabling the PMIC in the '_noenv'
U-Boot variant which is usually used in the manufacturing
environment.

3 years agokaro: tx6ul: make board string dependent on cpurev
Lothar Waßmann [Tue, 26 Apr 2016 13:30:56 +0000 (15:30 +0200)]
karo: tx6ul: make board string dependent on cpurev

3 years agomx6: clock: use setup_gpmi_io_clk() to change nfc clk divider for CONFIG_NAND_MXS
Lothar Waßmann [Tue, 26 Apr 2016 13:29:48 +0000 (15:29 +0200)]
mx6: clock: use setup_gpmi_io_clk() to change nfc clk divider for CONFIG_NAND_MXS

3 years agomx6: clock: fix integer overflow in calculation of relative error in set_nfc_clk()
Lothar Waßmann [Tue, 26 Apr 2016 13:20:19 +0000 (15:20 +0200)]
mx6: clock: fix integer overflow in calculation of relative error in set_nfc_clk()

3 years agomx6: ocotp: add timeout to busy wait loop
Lothar Waßmann [Tue, 26 Apr 2016 13:19:20 +0000 (15:19 +0200)]
mx6: ocotp: add timeout to busy wait loop

3 years agokaro: tx6: pmic: print PMIC name in boot messages
Lothar Waßmann [Tue, 26 Apr 2016 13:16:57 +0000 (15:16 +0200)]
karo: tx6: pmic: print PMIC name in boot messages

3 years agoarm: mx6: fix NFC clock get/set routines for i.MX6QP,i.MX6UL tx6qp-devel
Lothar Waßmann [Tue, 19 Apr 2016 14:07:37 +0000 (16:07 +0200)]
arm: mx6: fix NFC clock get/set routines for i.MX6QP,i.MX6UL

3 years agokaro: tx6: add support for TX6Q-8037 (i.MX6QP)
Lothar Waßmann [Mon, 18 Apr 2016 12:45:01 +0000 (14:45 +0200)]
karo: tx6: add support for TX6Q-8037 (i.MX6QP)

3 years agokaro: tx6: add support for boards with >= 2GiB memory
Lothar Waßmann [Mon, 18 Apr 2016 12:43:29 +0000 (14:43 +0200)]
karo: tx6: add support for boards with >= 2GiB memory

3 years agokaro: tx6: disable gpmi clk before changing podf and clk_sel
Lothar Waßmann [Mon, 18 Apr 2016 12:42:17 +0000 (14:42 +0200)]
karo: tx6: disable gpmi clk before changing podf and clk_sel

3 years agokaro: tx6: replace open coded interpretation of cpurev by calls to is_cpu_type()
Lothar Waßmann [Mon, 18 Apr 2016 07:43:23 +0000 (09:43 +0200)]
karo: tx6: replace open coded interpretation of cpurev by calls to is_cpu_type()

3 years agokaro: tx6: set LCD x, y dimensions to 0 when disabling LCD
Lothar Waßmann [Mon, 18 Apr 2016 07:33:43 +0000 (09:33 +0200)]
karo: tx6: set LCD x, y dimensions to 0 when disabling LCD

Even when the LCD is disabled, the LCD framework will still clear the
video memory. This can take a cosiderable amount of time for the
maximum resolution of 16MiB that the i.MX6 supports.

Setting vl_row and vl_col to 0 results in a zero sized framebuffer
to avoid this unnecessary delay.

3 years agokaro: tx6: rename CONFIG_SYS_BOOT_CMD_NAND to FDTSAVE_CMD_STR
Lothar Waßmann [Mon, 18 Apr 2016 07:30:59 +0000 (09:30 +0200)]
karo: tx6: rename CONFIG_SYS_BOOT_CMD_NAND to FDTSAVE_CMD_STR

This macro in not actually a configurable setting as the original
naming suggests.

3 years agomx6: clock: take 'num' and 'denom' regs into account when calculating audio/video...
Lothar Waßmann [Wed, 13 Apr 2016 10:03:10 +0000 (12:03 +0200)]
mx6: clock: take 'num' and 'denom' regs into account when calculating audio/video PLL frequency

3 years agonet: fec: use correct sizes to clear and flush descriptors
Lothar Waßmann [Wed, 13 Apr 2016 10:00:52 +0000 (12:00 +0200)]
net: fec: use correct sizes to clear and flush descriptors

3 years agorename TX6Q-1033 to TX6Q-1036
Lothar Waßmann [Wed, 13 Apr 2016 09:17:12 +0000 (11:17 +0200)]
rename TX6Q-1033 to TX6Q-1036

3 years agoMerge branch 'tx53-update-2016-02-03' into karo-tx6 KARO-TX6-2016-03-10
Lothar Waßmann [Thu, 18 Feb 2016 17:38:00 +0000 (18:38 +0100)]
Merge branch 'tx53-update-2016-02-03' into karo-tx6

3 years agoMerge branch 'tx28-update-2016-02-03' into karo-tx6
Lothar Waßmann [Thu, 18 Feb 2016 17:37:47 +0000 (18:37 +0100)]
Merge branch 'tx28-update-2016-02-03' into karo-tx6

3 years agoMerge branch 'tx6-update-2016-02-03' into karo-tx6
Lothar Waßmann [Thu, 18 Feb 2016 17:37:33 +0000 (18:37 +0100)]
Merge branch 'tx6-update-2016-02-03' into karo-tx6

3 years agokaro: tx6ul: fix bogus GPIO numbers
Lothar Waßmann [Thu, 18 Feb 2016 17:36:01 +0000 (18:36 +0100)]
karo: tx6ul: fix bogus GPIO numbers

3 years agokaro: tx6ul: add pad settings for FT5x06 and USB pads on STK5
Lothar Waßmann [Thu, 18 Feb 2016 17:35:38 +0000 (18:35 +0100)]
karo: tx6ul: add pad settings for FT5x06 and USB pads on STK5

3 years agokaro: tx6ul: add support for TX6UL Mainboard (v1)
Lothar Waßmann [Thu, 18 Feb 2016 17:34:32 +0000 (18:34 +0100)]
karo: tx6ul: add support for TX6UL Mainboard (v1)

3 years agokaro: tx6ul: defer mmc probing until environment has been loaded
Lothar Waßmann [Thu, 18 Feb 2016 17:30:19 +0000 (18:30 +0100)]
karo: tx6ul: defer mmc probing until environment has been loaded

Check the 'baseboard' environment variable before initializing the MMC
interface to prevent error messages on TX6UL-Mainboard which doesn't
support MMC mass storage.

3 years agokaro: tx6ul: proper initialize second FEC if available
Lothar Waßmann [Thu, 18 Feb 2016 17:29:21 +0000 (18:29 +0100)]
karo: tx6ul: proper initialize second FEC if available

3 years agokaro: tx6ul: reorder functions to better follow which ones are called with the defaul...
Lothar Waßmann [Thu, 18 Feb 2016 17:27:36 +0000 (18:27 +0100)]
karo: tx6ul: reorder functions to better follow which ones are called with the default resp. loaded environment

3 years agokaro: tx6: check ctrlc before returning error code for unsupported baseboard
Lothar Waßmann [Thu, 18 Feb 2016 17:18:43 +0000 (18:18 +0100)]
karo: tx6: check ctrlc before returning error code for unsupported baseboard

3 years agokaro: tx53: check ctrlc before returning error code for unsupported baseboard
Lothar Waßmann [Thu, 18 Feb 2016 17:17:01 +0000 (18:17 +0100)]
karo: tx53: check ctrlc before returning error code for unsupported baseboard

3 years agokaro: tx53: don't return non-zero return value in board_init() upon CTRL-C detection
Lothar Waßmann [Thu, 18 Feb 2016 17:16:23 +0000 (18:16 +0100)]
karo: tx53: don't return non-zero return value in board_init() upon CTRL-C detection

3 years agokaro: tx6ul: make show_activity() bail out on GPIO error
Lothar Waßmann [Thu, 18 Feb 2016 16:58:57 +0000 (17:58 +0100)]
karo: tx6ul: make show_activity() bail out on GPIO error

3 years agokaro: tx6ul: indentation fixes
Lothar Waßmann [Thu, 18 Feb 2016 16:57:57 +0000 (17:57 +0100)]
karo: tx6ul: indentation fixes

3 years agokaro: tx6: don't write u-boot image with WITH_DROP_FFS
Lothar Waßmann [Thu, 18 Feb 2016 16:23:58 +0000 (17:23 +0100)]
karo: tx6: don't write u-boot image with WITH_DROP_FFS

3 years agokaro: tx53: don't write u-boot image with WITH_DROP_FFS
Lothar Waßmann [Thu, 18 Feb 2016 15:22:15 +0000 (16:22 +0100)]
karo: tx53: don't write u-boot image with WITH_DROP_FFS

3 years agokaro: tx28: set CONFIG_ENV_OVERWRITE also for NAND environment
Lothar Waßmann [Thu, 11 Feb 2016 12:02:36 +0000 (13:02 +0100)]
karo: tx28: set CONFIG_ENV_OVERWRITE also for NAND environment

3 years agokaro: tx28: fix prototype of video_hw_init()
Lothar Waßmann [Thu, 11 Feb 2016 12:02:28 +0000 (13:02 +0100)]
karo: tx28: fix prototype of video_hw_init()

3 years agokaro: tx28: check ctrlc before returning error code for unsupported baseboard
Lothar Waßmann [Thu, 11 Feb 2016 12:02:21 +0000 (13:02 +0100)]
karo: tx28: check ctrlc before returning error code for unsupported baseboard

3 years agokaro: tx28: don't return non-zero return value in board_init() upon CTRL-C detection
Lothar Waßmann [Thu, 11 Feb 2016 12:02:04 +0000 (13:02 +0100)]
karo: tx28: don't return non-zero return value in board_init() upon CTRL-C detection

3 years agokaro: tx28: don't write u-boot image with WITH_DROP_FFS
Lothar Waßmann [Thu, 11 Feb 2016 11:26:02 +0000 (12:26 +0100)]
karo: tx28: don't write u-boot image with WITH_DROP_FFS

3 years agokaro: tx6ul: fix ENET2_TX_CLK pad settings
Lothar Waßmann [Thu, 4 Feb 2016 12:48:54 +0000 (13:48 +0100)]
karo: tx6ul: fix ENET2_TX_CLK pad settings

3 years agokaro: remove redundant cmap entry in panel_info
Lothar Waßmann [Thu, 4 Feb 2016 11:13:35 +0000 (12:13 +0100)]
karo: remove redundant cmap entry in panel_info

3 years agonet: fec_mxc: exempt already found PHYs from being probed again
Lothar Waßmann [Thu, 4 Feb 2016 11:12:19 +0000 (12:12 +0100)]
net: fec_mxc: exempt already found PHYs from being probed again

3 years agonet: fec_mxc: make base_mii configurable
Lothar Waßmann [Thu, 4 Feb 2016 11:11:38 +0000 (12:11 +0100)]
net: fec_mxc: make base_mii configurable

3 years agolcd: properly display bitmaps > 8bpp
Lothar Waßmann [Thu, 4 Feb 2016 11:01:35 +0000 (12:01 +0100)]
lcd: properly display bitmaps > 8bpp

3 years agolcd: support corner cases for splashpos
Lothar Waßmann [Thu, 4 Feb 2016 11:00:58 +0000 (12:00 +0100)]
lcd: support corner cases for splashpos

3 years agolcd: fix integer overflow in calculation of number of colors
Lothar Waßmann [Wed, 3 Feb 2016 06:16:20 +0000 (07:16 +0100)]
lcd: fix integer overflow in calculation of number of colors

3 years agolcd: fix typo CONFIG_BMP_24BMP -> CONFIG_BMP_24BPP
Lothar Waßmann [Wed, 3 Feb 2016 06:05:48 +0000 (07:05 +0100)]
lcd: fix typo CONFIG_BMP_24BMP -> CONFIG_BMP_24BPP

3 years agokaro: tx6ul: set VIDEO_PLL to 648MHz by default karo-tx6 KARO-TX6UL-2015-11-30
Lothar Waßmann [Thu, 26 Nov 2015 14:37:48 +0000 (15:37 +0100)]
karo: tx6ul: set VIDEO_PLL to 648MHz by default

3 years agokaro: tx6ul: fix ENFC_CLK_SEL bitmask
Lothar Waßmann [Thu, 26 Nov 2015 14:34:30 +0000 (15:34 +0100)]
karo: tx6ul: fix ENFC_CLK_SEL bitmask

On i.MX6UL the bitmask for ENFC_CLK_SEL in CS2CDR is different from the other
i.MX6 variants.

3 years agoARM: imx6ul: add support for mxsfb on i.MX6UL
Lothar Waßmann [Thu, 26 Nov 2015 14:33:58 +0000 (15:33 +0100)]
ARM: imx6ul: add support for mxsfb on i.MX6UL

3 years agoARM: imx6: clocks: add support for eLCDIF clock on i.MX6UL
Lothar Waßmann [Thu, 26 Nov 2015 14:31:34 +0000 (15:31 +0100)]
ARM: imx6: clocks: add support for eLCDIF clock on i.MX6UL

3 years agoARM: imx6: clocks: remove function local definitions of mxc_ccm_reg and anatop_regs
Lothar Waßmann [Thu, 26 Nov 2015 14:31:02 +0000 (15:31 +0100)]
ARM: imx6: clocks: remove function local definitions of mxc_ccm_reg and anatop_regs

3 years agoimx6: rename ANADIG_PLL_AUDIO_TEST_DIV to ANADIG_PLL_AUDIO_POST_DIV
Lothar Waßmann [Thu, 26 Nov 2015 14:30:00 +0000 (15:30 +0100)]
imx6: rename ANADIG_PLL_AUDIO_TEST_DIV to ANADIG_PLL_AUDIO_POST_DIV

3 years agokaro: tx6: enable CONFIG_BMP_*BPP to make splashscreen functional again
Lothar Waßmann [Thu, 26 Nov 2015 13:07:39 +0000 (14:07 +0100)]
karo: tx6: enable CONFIG_BMP_*BPP to make splashscreen functional again

3 years agokaro: tx6: rework PMIC code to allow for different configs for same chip
Lothar Waßmann [Thu, 26 Nov 2015 13:06:28 +0000 (14:06 +0100)]
karo: tx6: rework PMIC code to allow for different configs for same chip

3 years agokaro: tx6ul: enable soft_i2c for PMIC access
Lothar Waßmann [Thu, 26 Nov 2015 13:05:17 +0000 (14:05 +0100)]
karo: tx6ul: enable soft_i2c for PMIC access

3 years agokaro: tx6: set TX6_REV=0x1 where appropriate to eliminate code for unused PMIC chips
Lothar Waßmann [Thu, 26 Nov 2015 13:00:18 +0000 (14:00 +0100)]
karo: tx6: set TX6_REV=0x1 where appropriate to eliminate code for unused PMIC chips

3 years agokaro: tx6ul: fix max. dimensions of framebuffer
Lothar Waßmann [Thu, 26 Nov 2015 12:59:22 +0000 (13:59 +0100)]
karo: tx6ul: fix max. dimensions of framebuffer

4 years agokaro: tx6: disable LCD in '_noenv' config
Lothar Waßmann [Mon, 16 Nov 2015 07:57:32 +0000 (08:57 +0100)]
karo: tx6: disable LCD in '_noenv' config

4 years agokaro: tx6: remove secure_boot fuse override which is a leftover from secure boot...
Lothar Waßmann [Mon, 16 Nov 2015 07:56:32 +0000 (08:56 +0100)]
karo: tx6: remove secure_boot fuse override which is a leftover from secure boot tests

4 years agoMerge branch 'tx48-devel' into karo-devel
Lothar Waßmann [Mon, 26 Oct 2015 13:46:20 +0000 (14:46 +0100)]
Merge branch 'tx48-devel' into karo-devel

4 years agoMerge branch 'tx28-devel' into karo-devel
Lothar Waßmann [Mon, 26 Oct 2015 13:44:47 +0000 (14:44 +0100)]
Merge branch 'tx28-devel' into karo-devel

4 years agokaro: tx28: Kconfig: select CMD_ROMUPDATE for TX28 modules
Lothar Waßmann [Mon, 26 Oct 2015 13:19:48 +0000 (14:19 +0100)]
karo: tx28: Kconfig: select CMD_ROMUPDATE for TX28 modules

4 years agoMerge branch 'tx28-bugfix' into karo-devel
Lothar Waßmann [Mon, 26 Oct 2015 13:14:47 +0000 (14:14 +0100)]
Merge branch 'tx28-bugfix' into karo-devel

4 years agoMerge branch 'tx51-bugfix' into karo-devel
Lothar Waßmann [Mon, 26 Oct 2015 13:14:36 +0000 (14:14 +0100)]
Merge branch 'tx51-bugfix' into karo-devel

4 years agotools: elftosb: use g++ to compile elftosb to prevent link error due to missing libm
Lothar Waßmann [Mon, 26 Oct 2015 11:41:39 +0000 (12:41 +0100)]
tools: elftosb: use g++ to compile elftosb to prevent link error due to missing libm

4 years agotools: elftosb: makefile indentation and whitespace cleanup
Lothar Waßmann [Mon, 26 Oct 2015 11:40:59 +0000 (12:40 +0100)]
tools: elftosb: makefile indentation and whitespace cleanup

4 years agokaro: tx48: fix build error "undefined reference to `mmc_legacy_init'"
Lothar Waßmann [Mon, 26 Oct 2015 11:23:28 +0000 (12:23 +0100)]
karo: tx48: fix build error "undefined reference to `mmc_legacy_init'"

4 years agokaro: fdt: prevent duplicate call of fdt_fixup_ethernet()
Lothar Waßmann [Mon, 26 Oct 2015 11:15:08 +0000 (12:15 +0100)]
karo: fdt: prevent duplicate call of fdt_fixup_ethernet()

fdt_fixup_ethernet() is already called internally
by boot_prep_linux(). Remove the calls to it in ft_board_setup().

4 years agovideo: ipu: initialize g_ipu_clk, g_ldb_clk statically KARO-TX6UL-2015-10-23
Lothar Waßmann [Fri, 23 Oct 2015 10:46:03 +0000 (12:46 +0200)]
video: ipu: initialize g_ipu_clk, g_ldb_clk statically

When the FB driver has not been initialized, booting Linux will hang
the system when ipuv3_fb_shutdown() is called from arch_preboot_os()
because clk_enable(g_ipu_clk) is a NOP with g_ipu_clk == NULL.
There is no need to initialize these variables at runtime, so use
static initialization to prevent this problem.

4 years agoarm: mx6: fix the AIPS?_BASE_ADDR fsckup introduced by commit f5def95698f6
Lothar Waßmann [Thu, 22 Oct 2015 13:04:44 +0000 (15:04 +0200)]
arm: mx6: fix the AIPS?_BASE_ADDR fsckup introduced by commit f5def95698f6

commit f5def95698f6f3d8923f0e38706e3e5ebed81a10 ("imx: mx6: Fixed AIPS3 base address issue")
claimed to fix an AIPS3 base address issue, while it in fact messed up
the AIPS1 and AIPS2 base addresses too.

4 years agokaro: tx6: adapt romupdate command for i.MX6UL
Lothar Waßmann [Thu, 22 Oct 2015 09:28:29 +0000 (11:28 +0200)]
karo: tx6: adapt romupdate command for i.MX6UL

4 years agokaro: tx6: remove unused code from flash.c
Lothar Waßmann [Thu, 22 Oct 2015 09:28:05 +0000 (11:28 +0200)]
karo: tx6: remove unused code from flash.c

4 years agonand: mxs: convey return code from failed function rather than '0' in mxs_nand_ecc_wr...
Lothar Waßmann [Thu, 22 Oct 2015 09:27:22 +0000 (11:27 +0200)]
nand: mxs: convey return code from failed function rather than '0' in mxs_nand_ecc_write_page()

4 years agonand: mxs: make fake_ecc_layout static
Lothar Waßmann [Thu, 22 Oct 2015 09:26:36 +0000 (11:26 +0200)]
nand: mxs: make fake_ecc_layout static

4 years agonand: mxs: use CONFIG_ARCH_MX6 instead of CONFIG_SOC_MX6Q
Lothar Waßmann [Thu, 22 Oct 2015 09:26:22 +0000 (11:26 +0200)]
nand: mxs: use CONFIG_ARCH_MX6 instead of CONFIG_SOC_MX6Q

4 years agokaro: tx6ul: disable PMIC init
Lothar Waßmann [Tue, 20 Oct 2015 11:35:50 +0000 (13:35 +0200)]
karo: tx6ul: disable PMIC init

The I2C-GPIO driver requires configuration via DTB which is not
currently supported for Ka-Ro modules. So, disable the PMIC access for
now.

4 years agokaro: tx6: change DGCTRL init values depending on SoC type
Lothar Waßmann [Tue, 20 Oct 2015 11:28:03 +0000 (13:28 +0200)]
karo: tx6: change DGCTRL init values depending on SoC type

4 years agokaro: tx6: add TXUL support
Lothar Waßmann [Tue, 20 Oct 2015 11:27:51 +0000 (13:27 +0200)]
karo: tx6: add TXUL support

4 years agokaro: tx6: selectively set individual CCGR bits via DCD
Lothar Waßmann [Mon, 19 Oct 2015 11:49:04 +0000 (13:49 +0200)]
karo: tx6: selectively set individual CCGR bits via DCD

4 years agokaro: tx6: eliminate PHYS_SDRAM_1_WIDTH and use CONFIG_SYS_SDRAM_BUS_WIDTH instead
Lothar Waßmann [Mon, 19 Oct 2015 10:42:42 +0000 (12:42 +0200)]
karo: tx6: eliminate PHYS_SDRAM_1_WIDTH and use CONFIG_SYS_SDRAM_BUS_WIDTH instead

4 years agokaro: tx6: config.mk cleanup
Lothar Waßmann [Mon, 19 Oct 2015 10:37:29 +0000 (12:37 +0200)]
karo: tx6: config.mk cleanup

4 years agokaro: tx6: further cleanups
Lothar Waßmann [Mon, 19 Oct 2015 10:36:46 +0000 (12:36 +0200)]
karo: tx6: further cleanups

4 years agoarm: mx6: use imx6_thermal driver
Lothar Waßmann [Mon, 19 Oct 2015 10:28:12 +0000 (12:28 +0200)]
arm: mx6: use imx6_thermal driver

4 years agoarm: mx6: use fuse_read() for OCOTP fuse access
Lothar Waßmann [Mon, 19 Oct 2015 10:27:05 +0000 (12:27 +0200)]
arm: mx6: use fuse_read() for OCOTP fuse access

4 years agoarm: mxs: ocotp: disable OCOTP clock after access is finished
Lothar Waßmann [Mon, 12 Oct 2015 12:04:28 +0000 (14:04 +0200)]
arm: mxs: ocotp: disable OCOTP clock after access is finished

4 years agoremove obsolete functions ocotp_clk_{en,dis}able
Lothar Waßmann [Mon, 12 Oct 2015 09:28:33 +0000 (11:28 +0200)]
remove obsolete functions ocotp_clk_{en,dis}able

4 years agokconfig: arm: remove duplicate definitions of SOC_MX*
Lothar Waßmann [Mon, 12 Oct 2015 12:02:36 +0000 (14:02 +0200)]
kconfig: arm: remove duplicate definitions of SOC_MX*

4 years agokconfig: arm: move ARCH_MX? out of choice which selects TARGETs that depend on those
Lothar Waßmann [Mon, 12 Oct 2015 12:01:23 +0000 (14:01 +0200)]
kconfig: arm: move ARCH_MX? out of choice which selects TARGETs that depend on those

4 years agokconfig: arm: make cache configurable via Kconfig
Lothar Waßmann [Mon, 12 Oct 2015 08:42:36 +0000 (10:42 +0200)]
kconfig: arm: make cache configurable via Kconfig

4 years agoarm: mx6: remove CONFIG_ macros that are now included in Kconfig from header file
Lothar Waßmann [Mon, 12 Oct 2015 08:41:54 +0000 (10:41 +0200)]
arm: mx6: remove CONFIG_ macros that are now included in Kconfig from header file

4 years agoarm: mx6: rename some missed instances of CONFIG_MX6* to CONFIG_SOC_MX6*
Lothar Waßmann [Mon, 12 Oct 2015 08:40:51 +0000 (10:40 +0200)]
arm: mx6: rename some missed instances of CONFIG_MX6* to CONFIG_SOC_MX6*

4 years agodma: apbh: let APBH_DMA be selected, instead of enabling it by default
Lothar Waßmann [Mon, 12 Oct 2015 08:37:22 +0000 (10:37 +0200)]
dma: apbh: let APBH_DMA be selected, instead of enabling it by default

4 years agonet: fec_mxc: move CONFIG_FEC_MXC_PHYADDR from Kconfig to include/configs/*.h
Lothar Waßmann [Mon, 12 Oct 2015 08:21:52 +0000 (10:21 +0200)]
net: fec_mxc: move CONFIG_FEC_MXC_PHYADDR from Kconfig to include/configs/*.h

4 years agoarm: imx: prevent build error when CONFIG_FEC_MXC_PHYADDR is undefined
Lothar Waßmann [Mon, 12 Oct 2015 08:15:31 +0000 (10:15 +0200)]
arm: imx: prevent build error when CONFIG_FEC_MXC_PHYADDR is undefined

4 years agoimx: remove duplicated prototype for fecmxc_initialize() which is already defined...
Lothar Waßmann [Fri, 9 Oct 2015 10:32:18 +0000 (12:32 +0200)]
imx: remove duplicated prototype for fecmxc_initialize() which is already defined in include/netdev.h

4 years agokconfig: remove redundant 'default n'
Lothar Waßmann [Fri, 9 Oct 2015 09:45:53 +0000 (11:45 +0200)]
kconfig: remove redundant 'default n'

4 years agogpio: use appropriate return values for cmd handler
Lothar Waßmann [Fri, 9 Oct 2015 09:45:21 +0000 (11:45 +0200)]
gpio: use appropriate return values for cmd handler

4 years agonet: fec_mxc: use some more appropriate return values
Lothar Waßmann [Fri, 9 Oct 2015 09:43:47 +0000 (11:43 +0200)]
net: fec_mxc: use some more appropriate return values

4 years agonet: fec_mxc: consolidate data types and remove useless type casts
Lothar Waßmann [Fri, 9 Oct 2015 09:43:17 +0000 (11:43 +0200)]
net: fec_mxc: consolidate data types and remove useless type casts

4 years agonet: fec_mxc: don't write to reserved register on i.MX6UL
Lothar Waßmann [Fri, 9 Oct 2015 09:42:36 +0000 (11:42 +0200)]
net: fec_mxc: don't write to reserved register on i.MX6UL

4 years agonet: fec_mxc: don't try to clear read-only registers
Lothar Waßmann [Fri, 9 Oct 2015 08:53:38 +0000 (10:53 +0200)]
net: fec_mxc: don't try to clear read-only registers

The registers in the affected address range are all read only. There
is no use in trying to clear them.