karo-tx-uboot.git
16 years ago* Header file cleanup for ARM LABEL_2003_06_26_2220
wdenk [Wed, 25 Jun 2003 22:26:29 +0000 (22:26 +0000)]
* Header file cleanup for ARM

* Patch by Murray Jensen, 24 Jun 2003:
  - make sure to use only U-boot provided header files
  - fix problems with ".rodata.str1.4" section as used by GCC-3.x

16 years agoPatch from Stefan Roese.
stroese [Tue, 24 Jun 2003 14:32:24 +0000 (14:32 +0000)]
Patch from Stefan Roese.

16 years ago- Remove EEPROM command.
stroese [Tue, 24 Jun 2003 14:31:16 +0000 (14:31 +0000)]
- Remove EEPROM command.

16 years ago- Add ping support.
stroese [Tue, 24 Jun 2003 14:30:28 +0000 (14:30 +0000)]
- Add ping support.

16 years ago- Update NAND FLASH support.
stroese [Tue, 24 Jun 2003 14:27:27 +0000 (14:27 +0000)]
- Update NAND FLASH support.

16 years ago- Update new fpga file.
stroese [Tue, 24 Jun 2003 14:26:41 +0000 (14:26 +0000)]
- Update new fpga file.

16 years ago* Patch by Yuli Barcohen, 23 Jun 2003:
wdenk [Mon, 23 Jun 2003 18:12:28 +0000 (18:12 +0000)]
* Patch by Yuli Barcohen, 23 Jun 2003:
  Update for MPC8260ADS board

* Patch by Murray Jensen, 23 Jun 2003:
  - cleanup of GCC 3.x compiler warnings

16 years ago* Patch by Rune Torgersen, 4 Jun 2003:
wdenk [Sun, 22 Jun 2003 17:18:28 +0000 (17:18 +0000)]
* Patch by Rune Torgersen, 4 Jun 2003:
  add large memory support for MPC8266ADS board

* Patch by Richard Woodruff, 19 June 03:
  - Enabled standard u-boot device abstraction for ARM
  - Enabled console device for ARM
  - Initilized bi_baudrate for ARM

* Patch by Bill Hargen, 23 Apr 2003:
  fix byte order for 824x I2C addresses (write op)

16 years agoHad to move the RTC area for ATC board to upper addresses LABEL_2003_06_22_1530
wdenk [Sun, 22 Jun 2003 10:30:54 +0000 (10:30 +0000)]
Had to move the RTC area for ATC board to upper addresses
(0xf5000000, to be specific). The reason is that the RTC first gets
accessed before MMU is initialized and, consequently, it needs to be
placed at physical addresses which are later mapped to the same
virtual addresses (like 0xf5000000 physical is mapped to 0xf5000000
virtual).

16 years agoPatch by Murray Jensen, 20 Jun 2003:
wdenk [Sat, 21 Jun 2003 00:17:24 +0000 (00:17 +0000)]
Patch by Murray Jensen, 20 Jun 2003:
- hymod update
- cleanup (especially for gcc-3.x compilers)

16 years agoPatch by Tom Guilliams, 20 Jun 2003:
wdenk [Fri, 20 Jun 2003 23:10:58 +0000 (23:10 +0000)]
Patch by Tom Guilliams, 20 Jun 2003:
added CONFIG_750FX support for IBM 750FX processors

16 years ago* Patch by Devin Crumb, 02 Apr 2003:
wdenk [Fri, 20 Jun 2003 22:36:30 +0000 (22:36 +0000)]
* Patch by Devin Crumb, 02 Apr 2003:
  Fix clock divider rounding problem in drivers/serial.c

* Patch by Ken Chou, 19 June 2003:
  Added support for A3000 SBC board (Artis Microsystems Inc.)

16 years ago* Patch by Richard Woodruff, 19 June 03:
wdenk [Thu, 19 Jun 2003 23:58:30 +0000 (23:58 +0000)]
* Patch by Richard Woodruff, 19 June 03:
- Fixed smc91c111 driver to sync with the u-boot environment (driver/smc91c111.c).
- Added eth_init error return check in NetLoop (net/net.c).

16 years agoPatches by Murray Jensen, 17 Jun 2003:
wdenk [Thu, 19 Jun 2003 23:40:20 +0000 (23:40 +0000)]
Patches by Murray Jensen, 17 Jun 2003:
- Hymod board database mods: add "who" field and new xilinx chip types
- provide new "init_cmd_timeout()" function so code external to
  "common/main.c" can use the "reset_cmd_timeout()" function before
  entering the main loop
- add DTT support for adm1021 (new file dtt/adm1021.c; config
  slightly different. see include/configs/hymod.h for an example
  (requires CONFIG_DTT_ADM1021, CONFIG_DTT_SENSORS, and
  CFG_DTT_ADM1021 defined)
- add new "eeprom_probe()" function which has similar args and
  behaves in a similar way to "eeprom_read()" etc.
- add 8260 FCC ethernet loopback code (new "eth_loopback_test()"
  function which is enabled by defining CONFIG_ETHER_LOOPBACK_TEST)
- gdbtools copyright update
- ensure that set_msr() executes the "sync" and "isync" instructions
  after the "mtmsr" instruction in cpu/mpc8260/interrupts.c
- 8260 I/O ports fix: Open Drain should be set last when configuring
- add SIU IRQ defines for 8260
- allow LDSCRIPT override and OBJCFLAGS initialization: change to
  config.mk to allow board configurations to override the GNU
  linker script, selected via the LDSCRIPT, make variable, and to
  give an initial value to the OBJCFLAGS make variable
- 8260 i2c enhancement:
  o correctly extends the timeout depending on the size of all
    queued messages for both transmit and receive
  o will not continue with receive if transmit times out
  o ensures that the error callback is done for all queued tx
    and rx messages
  o correctly detects both tx and rx timeouts, only delivers one to
    the callback, and does not overwrite an earlier error
  o logic in i2c_probe now correct
- add "vprintf()" function so that "panic()" function can be
  technically correct
- many Hymod board changes

16 years agoPatches by Robert Schwebel, 14 Jun 2003:
wdenk [Thu, 19 Jun 2003 23:04:19 +0000 (23:04 +0000)]
Patches by Robert Schwebel, 14 Jun 2003:
- add support for Logotronic DL datalogger board
- cleanup serial line after kermit binary download
- add debugX macro (debug level support)
- update mach-types.h to latest arm.linux.org.uk master list.

16 years ago* Patches by David Müller, 12 Jun 2003:
wdenk [Thu, 19 Jun 2003 23:01:32 +0000 (23:01 +0000)]
* Patches by David Müller, 12 Jun 2003:
  - rewrite of the S3C24X0 register definitions stuff
  - "driver" for the built-in S3C24X0 RTC

* Patches by Yuli Barcohen, 12 Jun 2003:
  - Add MII support and Ethernet PHY initialization for MPC8260ADS board
  - Fix incorrect SIUMCR initialisation caused by wrong Hard Reset
    configuration word supplied by FPGA on some MPC8260ADS boards

* Patch by Pantelis Antoniou, 10 Jun 2003:
  Unify status LED interface

16 years agoAdd support for DS12887 RTC; add RTC support for ATC board
wdenk [Wed, 18 Jun 2003 20:22:24 +0000 (20:22 +0000)]
Add support for DS12887 RTC; add RTC support for ATC board

16 years ago* Patch by Nicolas Lacressonniere, 11 Jun 2003:
wdenk [Mon, 16 Jun 2003 23:50:08 +0000 (23:50 +0000)]
* Patch by Nicolas Lacressonniere, 11 Jun 2003:
  Modifications for Atmel AT91RM9200DK ARM920T based development kit
  - Add Atmel DataFlash support for reading and writing.
  - Add possibility to boot a Linux from DataFlash with BOOTM command.
  - Add Flash detection on Atmel AT91RM9200DK
    (between Atmel AT49BV1614 and AT49BV1614A flashes)
  - Replace old Ethernet PHY layer functions
  - Change link address

* Patch by Frank Smith, 9 Jun 2003:
  use CRIT_EXCEPTION for machine check on 4xx

* Patch by Detlev Zundel, 13 Jun 2003:
  added implementation of the "carinfo" command in cmd_immap.c

16 years ago* Fix CONFIG_NET_MULTI support in include/net.h LABEL_2003_06_16_0055
wdenk [Sun, 15 Jun 2003 22:40:42 +0000 (22:40 +0000)]
* Fix CONFIG_NET_MULTI support in include/net.h

* Patches by Kyle Harris, 13 Mar 2003:
  - Add FAT partition support
  - Add command support for FAT
  - Add command support for MMC
  ----
  - Add Intel PXA support for video
  - Add Intel PXA support for MMC
  ----
  - Enable MMC and FAT for lubbock board
  - Other misc changes for lubbock board

16 years agoPatch by Robert Schwebel, April 02, 2003:
wdenk [Fri, 6 Jun 2003 11:20:01 +0000 (11:20 +0000)]
Patch by Robert Schwebel, April 02, 2003:
fix for SMSC91111 driver

16 years ago- Update new fpga file.
stroese [Fri, 6 Jun 2003 09:44:40 +0000 (09:44 +0000)]
- Update new fpga file.

16 years ago- Fix compile bug (PPC4xx).
stroese [Fri, 6 Jun 2003 09:43:42 +0000 (09:43 +0000)]
- Fix compile bug (PPC4xx).

16 years ago* Patch by Vladimir Gurevich, 04 Jun 2003: LABEL_2003_06_05_2140
wdenk [Thu, 5 Jun 2003 19:37:36 +0000 (19:37 +0000)]
* Patch by Vladimir Gurevich, 04 Jun 2003:
  make ppc405 ethernet driver compatible with CONFIG_NET_MULTI option

16 years ago* Add support for RMU board
wdenk [Thu, 5 Jun 2003 19:27:42 +0000 (19:27 +0000)]
* Add support for RMU board

* Add support for TQM862L at 100/50 MHz

* Patch by Pantelis Antoniou, 02 Jun 2003:
  major reconstruction of networking code;
  add "ping" support (outgoing only!)

16 years agoPatch from Stefan Roese.
stroese [Thu, 5 Jun 2003 15:44:37 +0000 (15:44 +0000)]
Patch from Stefan Roese.

16 years ago- CFG_RX_ETH_BUFFER added.
stroese [Thu, 5 Jun 2003 15:39:44 +0000 (15:39 +0000)]
- CFG_RX_ETH_BUFFER added.

16 years ago- CFG_ETH_RX_BUFFER added.
stroese [Thu, 5 Jun 2003 15:38:29 +0000 (15:38 +0000)]
- CFG_ETH_RX_BUFFER added.

16 years ago- Fix bug for initial stack in data cache as pointed out by Thomas Schaefer (tschaefe...
stroese [Thu, 5 Jun 2003 15:35:20 +0000 (15:35 +0000)]
- Fix bug for initial stack in data cache as pointed out by Thomas Schaefer (tschaefer@giga-stream.de). Now inital stack in data cache can be used even if the chip select is in use.

16 years ago* Patch by Denis Peter, 04 June 2003:
wdenk [Wed, 4 Jun 2003 15:05:30 +0000 (15:05 +0000)]
* Patch by Denis Peter, 04 June 2003:
  add support for the MIP405T board

16 years ago* Patches by Udi Finkelstein, 2 June 2003: LABEL_2003_06_04_0200
wdenk [Tue, 3 Jun 2003 23:54:09 +0000 (23:54 +0000)]
* Patches by Udi Finkelstein, 2 June 2003:
  - Added support for custom keyboards, initialized by defining a
    board-specific drv_keyboard_init as well as defining CONFIG_KEYBOARD .
  - Added support for the RBC823 board.
  - cpu/mpc8xx/lcd.c now automatically calculates the
    Horizontal Pixel Count field.

* Fix alignment problem in BOOTP (dhcp_leasetime option)
  [pointed out by Nicolas Lacressonnière, 2 Jun 2003]

* Patch by Mark Rakes, 14 May 2003:
  add support for Intel e1000 gig cards.

* Patch by Nye Liu, 3 Jun 2003:
  fix critical typo in MAMR definition (include/mpc8xx.h)

* Fix requirement to align U-Boot image on 16 kB boundaries on PPC.

* Patch by Klaus Heydeck, 2 Jun 2003
  Minor changes for KUP4K configuration

16 years ago* Patch by Marc Singer, 29 May 2003: LABEL_2003_05_31_2115
wdenk [Sat, 31 May 2003 18:35:21 +0000 (18:35 +0000)]
* Patch by Marc Singer, 29 May 2003:
  Fixed rarp boot method for IA32 and other little-endian CPUs.

* Patch by Marc Singer, 28 May 2003:
  Added port I/O commands.

* Patch by Matthew McClintock, 28 May 2003
  - cpu/mpc824x/start.S: fix relocation code when booting from RAM
  - minor patches for utx8245

* Patch by Daniel Engström, 28 May 2003:
  x86 update

* Patch by Dave Ellis, 9 May 2003 + 27 May 2003:
  add nand flash support to SXNI855T configuration
  fix/extend nand flash support:
  - fix 'nand erase' command so does not erase bad blocks
  - fix 'nand write' command so does not write to bad blocks
  - fix nand_probe() so handles no flash detected properly
  - add doc/README.nand
  - add .jffs2 and .oob options to nand read/write
  - add 'nand bad' command to list bad blocks
  - add 'clean' option to 'nand erase' to write JFFS2 clean markers
  - make NAND read/write faster

* Patch by Rune Torgersen, 23 May 2003:
  Update for MPC8266ADS board

16 years ago* Get (mostly) rid of CFG_MONITOR_LEN definition; compute real length LABEL_2003_05_30_1450
wdenk [Fri, 30 May 2003 12:48:29 +0000 (12:48 +0000)]
* Get (mostly) rid of CFG_MONITOR_LEN definition; compute real length
  instead CFG_MONITOR_LEN is now only used to determine  _at_compile_
  _time_  (!) if the environment is embedded within the U-Boot image,
  or in a separate flash sector.

* Cleanup CFG_DER #defines in config files (wd maintained only)

16 years ago* Fix data abort exception handling for arm920t CPU
wdenk [Wed, 28 May 2003 08:06:31 +0000 (08:06 +0000)]
* Fix data abort exception handling for arm920t CPU

* Fix alignment problems with flash driver for TRAB board

* Patch by Donald White, 21 May 2003:
  fix calculation of base address in pci_hose_config_device()

* Fix bug in command line parsing: "cmd1;cmd2" is supposed to always
  execute "cmd2", even if "cmd1" fails. Note that this is different
  to "run var1 var2" where the contents of "var2" will NOT be
  executed when a command in "var1" fails.

16 years agoAdd zero-copy ramdisk support (requires corresponding kernel support!)
wdenk [Fri, 23 May 2003 23:18:21 +0000 (23:18 +0000)]
Add zero-copy ramdisk support (requires corresponding kernel support!)

16 years agoPatch by Kyle Harris, 20 May 2003: LABEL_2003_05_23_1450
wdenk [Fri, 23 May 2003 12:36:20 +0000 (12:36 +0000)]
Patch by Kyle Harris, 20 May 2003:
In preparation for an ixp port, rename cpu/xscale and arch-xscale
into cpu/pxa and arch-pxa.

16 years agoPatch from Stefan Roese.
stroese [Fri, 23 May 2003 11:49:24 +0000 (11:49 +0000)]
Patch from Stefan Roese.

16 years ago- ASH405 board added (PPC405EP based).
stroese [Fri, 23 May 2003 11:43:00 +0000 (11:43 +0000)]
- ASH405 board added (PPC405EP based).
- CPCI4052 added (PPC405GP based).
- CPCI405AB added (PPC405GP based).
- PCI405 added (PPC405GP based).
- PMC405 added (PPC405GP based).

16 years ago- ASH405 board added (PPC405EP based).
stroese [Fri, 23 May 2003 11:41:44 +0000 (11:41 +0000)]
- ASH405 board added (PPC405EP based).
- BUBINGA405EP added (PPC405EP based).
- CPCI405AB added (PPC405GP based).
- PMC405 added (PPC405GP based).

16 years agoCONFIG_UART1_CONSOLE added.
stroese [Fri, 23 May 2003 11:39:05 +0000 (11:39 +0000)]
CONFIG_UART1_CONSOLE added.

16 years agoPatch by Denis Peter, 19 Mai 2003:
wdenk [Fri, 23 May 2003 11:38:58 +0000 (11:38 +0000)]
Patch by Denis Peter, 19 Mai 2003:
add support for the MIP405-3 board

16 years agoDHCP support added.
stroese [Fri, 23 May 2003 11:38:22 +0000 (11:38 +0000)]
DHCP support added.

16 years agoPMC405 board added.
stroese [Fri, 23 May 2003 11:35:47 +0000 (11:35 +0000)]
PMC405 board added.

16 years agoCode cleanup.
stroese [Fri, 23 May 2003 11:35:09 +0000 (11:35 +0000)]
Code cleanup.

16 years agoNew FPGA image with 527 support.
stroese [Fri, 23 May 2003 11:34:40 +0000 (11:34 +0000)]
New FPGA image with 527 support.

16 years agoLocal Bus Timeout increased.
stroese [Fri, 23 May 2003 11:33:57 +0000 (11:33 +0000)]
Local Bus Timeout increased.

16 years agoCode reworked for PPC405EP support.
stroese [Fri, 23 May 2003 11:32:53 +0000 (11:32 +0000)]
Code reworked for PPC405EP support.

16 years agoCPCI405AB (special version of esd CPCI405) board added.
stroese [Fri, 23 May 2003 11:30:39 +0000 (11:30 +0000)]
CPCI405AB (special version of esd CPCI405) board added.

16 years agoBUBINGA405EP board added (IBM PPC405EP Eval Board).
stroese [Fri, 23 May 2003 11:28:55 +0000 (11:28 +0000)]
BUBINGA405EP board added (IBM PPC405EP Eval Board).

16 years agoASH405 board added (PPC405EP based).
stroese [Fri, 23 May 2003 11:27:18 +0000 (11:27 +0000)]
ASH405 board added (PPC405EP based).

16 years ago- PPC405EP support added.
stroese [Fri, 23 May 2003 11:25:57 +0000 (11:25 +0000)]
- PPC405EP support added.
- CONFIG_UART1_CONSOLE added (see README).

16 years agoPPC405EP support added.
stroese [Fri, 23 May 2003 11:18:02 +0000 (11:18 +0000)]
PPC405EP support added.

16 years ago- PPC405EP support added.
stroese [Fri, 23 May 2003 11:16:49 +0000 (11:16 +0000)]
- PPC405EP support added.
- "nand_init" (NAND FLASH) added.

16 years ago* Patch by Dave Ellis, 22 May 2003: LABEL_2003_05_23_0055
wdenk [Thu, 22 May 2003 22:52:13 +0000 (22:52 +0000)]
* Patch by Dave Ellis, 22 May 2003:
  Fix problem with only partially cleared .bss segment

* Patch by Rune Torgersen, 12 May 2003:
  get PCI to work on a MPC8266ADS board; incorporate change to
  cpu/mpc8260/pci.c to enable overrides of PCI memory parameters

16 years agoAdd support for arbitrary bitmaps for TRAB's VFD command; LABEL_2003_05_22_2230
wdenk [Wed, 21 May 2003 20:26:20 +0000 (20:26 +0000)]
Add support for arbitrary bitmaps for TRAB's  VFD command;
allow to pass boot bitmap addresses in environment variables;
allow for zero boot delay

16 years ago* Add support for arbitrary bitmaps for TRAB's VFD command LABEL_2003_05_20_2250
wdenk [Tue, 20 May 2003 20:49:01 +0000 (20:49 +0000)]
* Add support for arbitrary bitmaps for TRAB's  VFD command
* Patch by Christian Geißinger, 19 May 2002:
  On TRAB: wait until the dummy byte has been completely sent

16 years ago* Patch by David Updegraff, 22 Apr 2003: LABEL_2003_05_20_1630
wdenk [Tue, 20 May 2003 14:25:27 +0000 (14:25 +0000)]
* Patch by David Updegraff, 22 Apr 2003:
  update for CrayL1 board

* Patch by Pantelis Antoniou, 21 Apr 2003:
  add boot support for ARTOS (a proprietary OS)

* Patch by Steven Scholz, 11 Apr 2003:
  Add support for RTC DS1338

* Patch by Rod Boyce, 24 Jan 2003:
  Fix counting of extended partitions in diskboot command

16 years agoPatch by Christophe Lindheimer, 20 May 2003:
wdenk [Tue, 20 May 2003 10:58:04 +0000 (10:58 +0000)]
Patch by Christophe Lindheimer, 20 May 2003:
allow the use of CFG_LOADS when CFG_NO_FLASH is set

16 years agoFix SDRAM timing on Purple board
wdenk [Tue, 20 May 2003 10:39:44 +0000 (10:39 +0000)]
Fix SDRAM timing on Purple board

16 years agoAdd support for CompactFlash on ATC board
wdenk [Sun, 18 May 2003 11:30:09 +0000 (11:30 +0000)]
Add support for CompactFlash on ATC board
(includes support for Intel 82365 and compatible PC Card controllers,
and Yenta-compatible PCI-to-CardBus controllers)

16 years agoPatch by Mathijs Haarman, 08 May 2003: LABEL_2003_05_12_2355
wdenk [Mon, 12 May 2003 21:50:16 +0000 (21:50 +0000)]
Patch by Mathijs Haarman, 08 May 2003:
Add lan91c96 driver (tested on Lubbock and custom PXA250 board only)

16 years agoFix SDRAM initialization
wdenk [Mon, 12 May 2003 09:51:52 +0000 (09:51 +0000)]
Fix SDRAM initialization

16 years agoAdd default switch settings.
wdenk [Mon, 12 May 2003 09:51:00 +0000 (09:51 +0000)]
Add default switch settings.

16 years agoFix ATC board configuration and flash driver
wdenk [Mon, 5 May 2003 17:09:41 +0000 (17:09 +0000)]
Fix ATC board configuration and flash driver

16 years agoFix problem with usage of "true" (undefined in current versions of bfd.h)
wdenk [Sat, 3 May 2003 23:33:47 +0000 (23:33 +0000)]
Fix problem with usage of "true" (undefined in current versions of bfd.h)

16 years ago* Add support for Promess ATC board LABEL_2003_05_03_1700
wdenk [Sat, 3 May 2003 15:50:43 +0000 (15:50 +0000)]
* Add support for Promess ATC board

* Patch by Keith Outwater, 28 Apr 2003:
  - Miscellaneous corrections and additions to GEN860T board specific code.
  - Added GEN860_SC variant to GEN860T.
  - Miscellaneous corrections to GEN860T documentation.
  - Correct duplicate entry in U-Boot CREDITS file.
  - Add GEN860T_SC entry in MAINTAINERS file.
  - Update CREDITS file with GEN860T_SC info.

* Update Smiths Aerospace addresses in MAINTAINERS file

* Fix error handling in hush's version of "run" command

16 years ago* LWMON extensions:
wdenk [Sun, 27 Apr 2003 22:52:51 +0000 (22:52 +0000)]
* LWMON extensions:
  - Splashscreen support
  - modem support
  - sysmon support
  - temperature dependend enabling of LCD

* Allow booting from old "PPCBoot" disk partitions

* Add support for TQM8255 Board / MPC8255 CPU

16 years ago*** empty log message *** U-Boot-0_3_1
wdenk [Sun, 20 Apr 2003 17:41:25 +0000 (17:41 +0000)]
*** empty log message ***

16 years agoMake compile clean
wdenk [Sun, 20 Apr 2003 17:26:01 +0000 (17:26 +0000)]
Make compile clean

16 years agoAdd files needed for bitmap load support
wdenk [Sun, 20 Apr 2003 16:52:09 +0000 (16:52 +0000)]
Add files needed for bitmap load support

16 years agoCompile fixes
wdenk [Sun, 20 Apr 2003 16:49:37 +0000 (16:49 +0000)]
Compile fixes

16 years ago* Make sure Block Lock Bits get cleared in R360MPI flash driver
wdenk [Sun, 20 Apr 2003 14:04:18 +0000 (14:04 +0000)]
* Make sure Block Lock Bits get cleared in R360MPI flash driver

* MPC823 LCD driver: Fill color map backwards, to allow for steady
  display when Linux takes over

* Patch by Erwin Rol, 27 Feb 2003:
  Add support for RTEMS (this time for real).

* Add support for "bmp info" and "bmp display" commands to load
  bitmap images; this can be used (for example in a "preboot"
  command) to display a splash screen very quickly after poweron.

* Add support for 133 MHz clock on INCA-IP board

16 years ago* Patch by Lutz Dennig, 10 Apr 2003: LABEL_2003_04_15_1900
wdenk [Sat, 12 Apr 2003 23:38:12 +0000 (23:38 +0000)]
* Patch by Lutz Dennig, 10 Apr 2003:
  Update for R360MPI board

* Add new meaning to "autostart" environment variable:
  If set to "no", a standalone image passed to the
  "bootm" command will be copied to the load address
  (and eventually uncompressed), but NOT be started.
  This can be used to load and uncompress arbitrary
  data.

* Set max brightness for MN11236 displays on TRAB board

16 years agoPatch from Stefan Roese.
stroese [Thu, 10 Apr 2003 13:30:28 +0000 (13:30 +0000)]
Patch from Stefan Roese.

16 years agoChanged DHCP client to use ip address from server option field #54 from the OFFER...
stroese [Thu, 10 Apr 2003 13:26:44 +0000 (13:26 +0000)]
Changed DHCP client to use ip address from server option field #54 from the OFFER-paket in the server option field #54 in the REQUEST-paket. This fixes a problem using a Windows 2000 DHCP server, where the DHCP-server is not the TFTP-server.

16 years agoAdd support for TQM862L modules
wdenk [Thu, 10 Apr 2003 11:18:18 +0000 (11:18 +0000)]
Add support for TQM862L modules

16 years agoPrepare for 0.3.0 release U-Boot-0_3_0
wdenk [Tue, 8 Apr 2003 23:25:21 +0000 (23:25 +0000)]
Prepare for 0.3.0 release

* Add support for Purple Board (MIPS64 5Kc)

* Add support for MIPS64 5Kc CPUs

16 years ago* Patch by Arun Dharankar, 4 Apr 2003: LABEL_2003_04_05_0300
wdenk [Sat, 5 Apr 2003 00:53:31 +0000 (00:53 +0000)]
* Patch by Arun Dharankar, 4 Apr 2003:
  Add IDMA example code (tested on 8260 only)

* Add support for Purple Board (MIPS64 5Kc)

* Add support for MIPS64 5Kc CPUs

* Fix missing setting of "loadaddr" and "bootfile" on ARM and MIPS

* Patch by Denis Peter, 04 Apr 2003:
  - update MIP405-4 board

* Patches by Denis Peter, 03 April 2003:
  - fix PCI IRQs on MPL boards
  - fix two more un-relocated pointer problems

* Fix behaviour of "run" command:
  - print error message iv variable does not exist
  - terminate processing of arguments in case of error

* Patches by Peter Figuli, 10 Mar 2003
  - Add support for BTUART on PXA platform
  - Add support for WEP EP250 (PXA) board

* Fix flash problems on INCA-IP; add tool to allow bruning images  to
  flash using a BDI2000

* Implement fix for I2C Edge Conditions problem for all boards that
  use the bit-banging driver (common/soft_i2c.c)

* Add patches by Robert Schwebel, 31 Mar 2003:
  - csb226 board: bring in sync with innokom/memsetup.S
  - csb226 board: fix MDREFR handling
  - misc doc fixes / extensions
  - innokom board: cleanup, MDREFR fix in memsetup.S, config update
  - add BOOT_PROGRESS to armlinux.c

16 years agoPatch from Stefan Roese.
stroese [Fri, 4 Apr 2003 16:55:30 +0000 (16:55 +0000)]
Patch from Stefan Roese.

16 years agoChanged CPCI405 to use CTS instead of DSR on PPC405 UART1.
stroese [Fri, 4 Apr 2003 16:52:57 +0000 (16:52 +0000)]
Changed CPCI405 to use CTS instead of DSR on PPC405 UART1.

16 years agoU-Boot version environment variable "ver" added (CONFIG_VERSION_VARIABLE).
stroese [Fri, 4 Apr 2003 16:48:07 +0000 (16:48 +0000)]
U-Boot version environment variable "ver" added (CONFIG_VERSION_VARIABLE).

16 years agoChanged PPC405GPr version from A to B.
stroese [Fri, 4 Apr 2003 16:00:33 +0000 (16:00 +0000)]
Changed PPC405GPr version from A to B.

16 years agoU-Boot version environment variable "ver" added (CONFIG_VERSION_VARIABLE).
stroese [Fri, 4 Apr 2003 15:53:41 +0000 (15:53 +0000)]
U-Boot version environment variable "ver" added (CONFIG_VERSION_VARIABLE).

16 years agoU-Boot version environment variable "ver" added (CONFIG_VERSION_VARIABLE).
stroese [Fri, 4 Apr 2003 15:44:49 +0000 (15:44 +0000)]
U-Boot version environment variable "ver" added (CONFIG_VERSION_VARIABLE).

16 years ago* Patch by Martin Winistoerfer, 23 Mar 2003
wdenk [Mon, 31 Mar 2003 17:27:09 +0000 (17:27 +0000)]
* Patch by Martin Winistoerfer, 23 Mar 2003
  - Add port to MPC555/556 microcontrollers
  - Add support for cmi customer board with
    Intel 28F128J3A, 28F320J3A or 28F640J3A flash.

* Patch by Rick Bronson, 28 Mar 2003:
  - fix common/cmd_nand.c

16 years ago* Patch by Arun Dharankar, 24 Mar 2003:
wdenk [Mon, 31 Mar 2003 16:34:49 +0000 (16:34 +0000)]
* Patch by Arun Dharankar, 24 Mar 2003:
  - add threads / scheduler example code

* Add patches by Robert Schwebel, 31 Mar 2003:
  - add ctrl-c support for kermit download
  - align bdinfo output on ARM

* Add CPU ID, version, and clock speed for INCA-IP

16 years agoPatches by Dave Ellis, 18 Mar 2003 for SXNI855T board:
wdenk [Fri, 28 Mar 2003 14:40:36 +0000 (14:40 +0000)]
Patches by Dave Ellis, 18 Mar 2003 for SXNI855T board:
- fix SRAM and SDRAM memory sizing
- add status LED support
- add MAC address for second (SCC1) ethernet port

Update default environment for TQM8260 board

16 years agoFix MIPS build problem LABEL_2003_03_27_1900
wdenk [Thu, 27 Mar 2003 18:00:16 +0000 (18:00 +0000)]
Fix MIPS build problem

16 years ago* Add support for MIPS32 4Kc CPUs
wdenk [Thu, 27 Mar 2003 12:09:35 +0000 (12:09 +0000)]
* Add support for MIPS32 4Kc CPUs

* Add support for INCA-IP Board

16 years agoMake compile clean, fix the usual small problems. LABEL_2003_03_26_1300
wdenk [Wed, 26 Mar 2003 11:42:53 +0000 (11:42 +0000)]
Make compile clean, fix the usual small problems.

16 years agoesd PCI405 updated.
stroese [Wed, 26 Mar 2003 10:36:12 +0000 (10:36 +0000)]
esd PCI405 updated.

16 years ago* Patch by Rick Bronson, 16 Mar 2003:
wdenk [Wed, 26 Mar 2003 06:55:25 +0000 (06:55 +0000)]
* Patch by Rick Bronson, 16 Mar 2003:
  Add support for Atmel AT91RM9200DK w/NAND

* Patches by Robert Schwebel, 19 Mar 2003:
  - use arm-linux-gcc as default compiler for ARM
  - fix i2c fixup code
  - fix missing baudrate setting
  - added $loadaddr / CFG_LOAD_ADDR support to loadb
  - moved "ignoring trailing characters" _before_ u-boot wants to
    print out diagnostics messages; removes bogus characters at the
    end of transmission

* Patch by John Zhan, 18 Mar 2003:
  Add support for SinoVee Microsystems SC8xx boards

* Patch by Rolf Offermanns, 21 Mar 2003:
  ported the dnp1110 related changes from the current armboot cvs to
  current u-boot cvs. smc91111 does not work. problem marked in
  smc91111.c, grep for "FIXME".

* Patch by Brian Auld, 25 Mar 2003:
  Add support for STM flash chips on ebony board

 * Add PCI support for MPC8250 Boards (PM825 module)

 * Patch by Stefan Roese, 25 Mar 2003:

16 years ago*** empty log message *** LABEL_2003_03_25_1830
wdenk [Tue, 25 Mar 2003 18:06:06 +0000 (18:06 +0000)]
*** empty log message ***

16 years agoAdd PCI support for MPC8250 Boards (PM825 module)
wdenk [Tue, 25 Mar 2003 16:50:56 +0000 (16:50 +0000)]
Add PCI support for MPC8250 Boards (PM825 module)

16 years agoPatch by Stefan Roese , 25 Mar 2003.
stroese [Tue, 25 Mar 2003 14:44:48 +0000 (14:44 +0000)]
Patch by Stefan Roese , 25 Mar 2003.

16 years agoBSP-Command for esd PCI405 added.
stroese [Tue, 25 Mar 2003 14:43:01 +0000 (14:43 +0000)]
BSP-Command for esd PCI405 added.

16 years agoesd PCI405 updated.
stroese [Tue, 25 Mar 2003 14:41:35 +0000 (14:41 +0000)]
esd PCI405 updated.

16 years agoPatch by Stefan Roese , 20 Mar 2003.
stroese [Thu, 20 Mar 2003 15:32:59 +0000 (15:32 +0000)]
Patch by Stefan Roese , 20 Mar 2003.

16 years agoCPCI4052 update (support for revision 3).
stroese [Thu, 20 Mar 2003 15:31:19 +0000 (15:31 +0000)]
CPCI4052 update (support for revision 3).

16 years agoAdded edge conditioning register (ecr) for PPC405GPr.
stroese [Thu, 20 Mar 2003 15:27:41 +0000 (15:27 +0000)]
Added edge conditioning register (ecr) for PPC405GPr.

16 years agoClip udiv to 5 bits on PPC405 (serial.c).
stroese [Thu, 20 Mar 2003 15:25:59 +0000 (15:25 +0000)]
Clip udiv to 5 bits on PPC405 (serial.c).