karo-tx-uboot.git
15 years agoCleanup LABEL_2004_10_12_0110
wdenk [Mon, 11 Oct 2004 23:10:30 +0000 (23:10 +0000)]
Cleanup

15 years ago* Enable NAND flash support for NC650 board.
wdenk [Mon, 11 Oct 2004 23:03:10 +0000 (23:03 +0000)]
* Enable NAND flash support for NC650 board.

* Patch by Thomas Lange 07 Oct 2004:
  Updated README for DBAu1x00 boards to match current status

15 years ago* Patch by Philippe Robin, 28 Sept 2004:
wdenk [Mon, 11 Oct 2004 22:51:13 +0000 (22:51 +0000)]
* Patch by Philippe Robin, 28 Sept 2004:
  Fix Flash support for Versatile.

* Patch by Roger Blofeld, 16 Sep 2004:
  Fix timeout for DHCP command retry

15 years ago* Patch by Pantelis Antoniou, 14 Sep 2004:
wdenk [Mon, 11 Oct 2004 22:43:02 +0000 (22:43 +0000)]
* Patch by Pantelis Antoniou, 14 Sep 2004:
  Fix early serial hang when CONFIG_SERIAL_MULTI is defined.

* Patch by Pantelis Antoniou, 14 Sep 2004:
  Kick watchdog when bz-decompressing

15 years agoFix CFG_HZ problems on AT91RM9200 systems
wdenk [Mon, 11 Oct 2004 22:25:49 +0000 (22:25 +0000)]
Fix CFG_HZ problems on AT91RM9200 systems
[Remember: CFG_HZ should be 1000 on ALL systems!]

15 years ago* Patch by Gridish Shlomi, 30 Aug 2004:
wdenk [Sun, 10 Oct 2004 23:27:33 +0000 (23:27 +0000)]
* Patch by Gridish Shlomi, 30 Aug 2004:
  - Add support to revA version of PQ27 and PQ27E.
  - Reverted MPC8260ADS baudrate back to original 115200

* Patch by Hojin, 17 Sep 2004:
  Fix typo in cfi_flash.c

* Patch by Mark Jonas, 09 September 2004:
  mtest's data line test (with CFG_ALT_MEMTEST set) returned a wrong
  error message

* Patch by Mark Jonas, 31 August 2004:
  Added option CFG_XLB_PIPELINING to enable XLB pipelining. This
  improves FTP performance for MPC5200 systems. Enabled for IceCube
  by default.

15 years ago* Patch by Michael Bendzick, 30 Aug 2004:
wdenk [Sun, 10 Oct 2004 22:44:24 +0000 (22:44 +0000)]
* Patch by Michael Bendzick, 30 Aug 2004:
  - Improve platform.S code for omap1510inn that detects whether code
    is running from SDRAM or not. Patch allows SDRAM to be configured
    if code is running out of SRAM at 0x20000000.

* Patch by Frederick Klatt, 30 Aug 2004:
  Add support for the Wind River SBC8540/SBC8560 boards

15 years ago* Configure SX1 board to use drivers/cfi_flash.c
wdenk [Sun, 10 Oct 2004 22:16:06 +0000 (22:16 +0000)]
* Configure SX1 board to use drivers/cfi_flash.c

* Patches by Michael Bendzick, 30 Aug 2004:
  - Configure omap1510inn board to use drivers/cfi_flash.c
  - Make drivers/cfi_flash.c protect environment and redundant
    environment.

* Patch by Steven Scholz, 23 Jun 2004:
  - Add script (tools/img2brec.sh) to programm U-Boot into
    (Synch)Flash using the Bootstrap Mode of the MC9328MX1/L

15 years agoPatches by Scott McNutt, 24 Aug 2004:
wdenk [Sun, 10 Oct 2004 21:27:30 +0000 (21:27 +0000)]
Patches by Scott McNutt, 24 Aug 2004:
- Add support for Altera Nios-II processors.
- Add support for Psyent PCI-5441 board.
- Add support for Psyent PK1C20 board.

15 years agoPatches by Jon Loeliger, 24 Aug 2004:
wdenk [Sun, 10 Oct 2004 21:21:55 +0000 (21:21 +0000)]
Patches by Jon Loeliger, 24 Aug 2004:
- Add support for the MPC8541 and MPC8555 CDS boards
- Cleanup eth?addr handling: make dependent on CONFIG_ETH?ADDR

15 years ago* Patch by Jon Loeliger, 24 Aug 2004:
wdenk [Sun, 10 Oct 2004 20:23:57 +0000 (20:23 +0000)]
* Patch by Jon Loeliger, 24 Aug 2004:
  - Fix PCI window on MPC85xx; remove unneeded PCI initialization
    from board_early_init_f()
  - Provide SW workaround for PCI initialization on 85xx CDS
  - Convert MPC85xxADS to use common CFI flash driver

* Cleanup: avoid compiler warnings

* Add CMC PU2 board to MAKEALL script

15 years agoPatches by George G. Davis, 24 Aug 2004:
wdenk [Sun, 10 Oct 2004 18:49:14 +0000 (18:49 +0000)]
Patches by George G. Davis, 24 Aug 2004:
- Enable ramdisk/initrd tagged param support for omap1610h2_config
- Remove static network setup defaults from mx1ads_config

15 years agoPatch by George G. Davis, 24 Aug 2004:
wdenk [Sun, 10 Oct 2004 18:41:04 +0000 (18:41 +0000)]
Patch by George G. Davis, 24 Aug 2004:
- update ARM boards to use constants from mach-types.h

15 years agoCode Cleanup
wdenk [Sun, 10 Oct 2004 18:03:33 +0000 (18:03 +0000)]
Code Cleanup

Patch by Gary Jennejohn, 04 Oct 2004:
- fix I2C on at91rm9200
- add support for Ricoh RS5C372A RTC

15 years ago* Patch by Gary Jennejohn, 01 Oct 2004:
wdenk [Sun, 10 Oct 2004 17:05:18 +0000 (17:05 +0000)]
* Patch by Gary Jennejohn, 01 Oct 2004:
  - add support for CMC PU2 board
  - add support for I2C on at91rm9200

* Patch by Gary Jennejohn, 28 Sep 2004:
  fix baudrate handling on at91rm9200

15 years agoPatch by Yuli Barcohen, 22 Aug 2004:
wdenk [Sat, 9 Oct 2004 23:33:42 +0000 (23:33 +0000)]
Patch by Yuli Barcohen, 22 Aug 2004:
- remove ZPC.1900 board-specific flash driver;
  switch the port to generic CFI driver;
- port clean-up

15 years agoPatch by Hinko Kocevar, 21 Aug 2004:
wdenk [Sat, 9 Oct 2004 23:28:40 +0000 (23:28 +0000)]
Patch by Hinko Kocevar, 21 Aug 2004:
Add calc_fbsize() function used with VIDEOLFB_TAG on TRAB

15 years ago* Clean up tools/bmp_logo.c to not add trailing white space
wdenk [Sat, 9 Oct 2004 23:25:58 +0000 (23:25 +0000)]
* Clean up tools/bmp_logo.c to not add trailing white space

* Patch by Hinko Kocevar, 21 Aug 2004:
  - Group common framebuffer functions in common/lcd.c
  - Group common framebuffer macros and #defines in include/lcd.h
  - Provide calc_fbsize() for video ATAG

15 years agoPatch by Sam Song, 21 August 2004:
wdenk [Sat, 9 Oct 2004 22:44:59 +0000 (22:44 +0000)]
Patch by Sam Song, 21 August 2004:
- Fix a typo in README
- Align "(RO)" output for "flinfo" after "protect on"
- Add RESET support for RPXlite_DW board; adjust CPU:BUS frequency
  ratio 1:1 when core frequency less than 50MHz

15 years agoPatches by himba, 21 Aug 2004:
wdenk [Sat, 9 Oct 2004 22:32:26 +0000 (22:32 +0000)]
Patches by himba, 21 Aug 2004:
- fix some "use of label at end of compound statement" warnings
- Define type of LCD panel on lubbock board if CONFIG_LCD is used

15 years agoPatch by Steven Scholz, 16 Aug 2004:
wdenk [Sat, 9 Oct 2004 22:21:29 +0000 (22:21 +0000)]
Patch by Steven Scholz, 16 Aug 2004:
- Introducing the concept of SoCs "./cpu/$(CPU)/$(SOC)"
- creating subdirs for SoCs ./cpu/arm920t/imx and ./cpu/arm920t/s3c24x0
- moving SoC specific code out of cpu/arm920t/ into cpu/arm920t/$(SOC)/
- moving drivers/s3c24x0_i2c.c and drivers/serial_imx.c out of drivers/
  into cpu/arm920t/$(SOC)/

15 years agoPatch by Andreas Engel, 16 Aug 2004:
wdenk [Sat, 9 Oct 2004 21:56:21 +0000 (21:56 +0000)]
Patch by Andreas Engel, 16 Aug 2004:
parameter type cleanup for NetSetTimeout()

15 years ago* Patches by Sean Chang, 09 Aug 2004:
wdenk [Wed, 29 Sep 2004 22:55:14 +0000 (22:55 +0000)]
* Patches by Sean Chang, 09 Aug 2004:
  - Added support for both 8 and 16 bit mode access to System ACE CF
    through MPU.
  - Fixed missing System ACE CF device during get FAT partition info
    in fat_register_device function.
  - Enabled System ACE CF support on ML300.

* Patch by Sean Chang, 09 Aug 2004:
  Synch defines for saveenv and do_saveenv functions so they get
  compiled under the same statement.

15 years ago* Patch by Sean Chang, 9 Aug 2004:
wdenk [Wed, 29 Sep 2004 22:43:59 +0000 (22:43 +0000)]
* Patch by Sean Chang, 9 Aug 2004:
  - Added I2C support for ML300.
  - Added support for ML300 to read out its environment information
    stored on the EEPROM.
  - Added support to use board specific parameters as part of
    U-Boot's environment information.
  - Updated MLD files to support configuration for new features
    above.

* Patches by Travis Sawyer, 5 Aug 2004:
  - Remove incorrect bridge settings for eth group 6
  - Add call to setup bridge in ppc_440x_eth_initialize
  - Fix ppc_440x_eth_init to reset the phy only if its the
    first time through, otherwise, just check the phy for the
    autonegotiated speed/duplex.  This allows the use of netconsole
  - only print the speed/duplex the first time the phy is reset.

15 years ago* Patch by Shlomo Kut, 29 Mar 2004:
wdenk [Wed, 29 Sep 2004 11:02:56 +0000 (11:02 +0000)]
* Patch by Shlomo Kut, 29 Mar 2004:
  Add support for MKS Instruments "Quantum" board

* Fix build problem with Cogent boards;
  avoid using <asm/byteorder.h> when using the host compiler

15 years ago* Patch by Ganapathi C, 04 Aug 2004:
wdenk [Tue, 28 Sep 2004 21:51:42 +0000 (21:51 +0000)]
* Patch by Ganapathi C, 04 Aug 2004:
  Fix NFS timeout issue

15 years ago* Patch by Yuli Barcohen, 19 Jul 2004:
wdenk [Tue, 28 Sep 2004 21:39:45 +0000 (21:39 +0000)]
* Patch by Yuli Barcohen, 19 Jul 2004:
  - Fix host tools building in Cygwin environment
  - Fix header files search order for host tools

* Patch by Tom Armistead, 19 Jul 2004:
  Fix kgdb.S support for 74xx_75x cpu

15 years ago* Patch by Jon Loeliger, 15 Jul 2004:
wdenk [Tue, 28 Sep 2004 21:26:26 +0000 (21:26 +0000)]
* Patch by Jon Loeliger, 15 Jul 2004:
  Fix MPC85xx I2C driver

15 years agoFix problems with CDROM drive as slave device on Lite5200 IDE bus.
wdenk [Tue, 28 Sep 2004 20:34:50 +0000 (20:34 +0000)]
Fix problems with CDROM drive as slave device on Lite5200 IDE bus.

15 years ago* Patch by Stephen Williams, 15 July 2004
wdenk [Tue, 28 Sep 2004 19:00:19 +0000 (19:00 +0000)]
* Patch by Stephen Williams, 15 July 2004
  Set the PCI class code for JSE board as part of PCI interface setup

* Patch by Michael Bendzick, 15 Jul 2004:
  Fix problem with writes with odd sizes in drivers/cfi_flash.c when
  CFG_FLASH_USE_BUFFER_WRITE is set

15 years ago* Patch by Yuli Barcohen, 13 Jul 2004:
wdenk [Tue, 28 Sep 2004 17:59:53 +0000 (17:59 +0000)]
* Patch by Yuli Barcohen, 13 Jul 2004:
  Allow clock setting on MPC866/MPC885 series chips according to
  environment variable `cpuclk'

* Patch by Yuli Barcohen, 20 Apr 2004:
  Remove unnecessary redefine of CPM_DATAONLY_SIZE for MPC826x

15 years agoPatch by Vincent Dubey, 24 Sep 2004:
wdenk [Tue, 28 Sep 2004 16:44:41 +0000 (16:44 +0000)]
Patch by Vincent Dubey, 24 Sep 2004:
Add support for xaeniax board

15 years ago* Add comment about non-GPL character of standalone applications to
wdenk [Mon, 27 Sep 2004 20:20:11 +0000 (20:20 +0000)]
* Add comment about non-GPL character of standalone applications to
  COPYING file

* Fix FEC ethernet problem on NSCU board.

15 years agoPatch by Gary Jennejohn, 09 Sep 2004:
wdenk [Tue, 21 Sep 2004 23:33:32 +0000 (23:33 +0000)]
Patch by Gary Jennejohn, 09 Sep 2004:
allow to use USART1 as console port on at91rm9200dk boards

15 years agoFix [noeol] problem in board/esd/ar405/fpgadata_xl30.c
wdenk [Thu, 16 Sep 2004 12:57:35 +0000 (12:57 +0000)]
Fix [noeol] problem in board/esd/ar405/fpgadata_xl30.c

15 years agoPatch by Stefan Roese, 16 Sep 2004
stroese [Thu, 16 Sep 2004 12:37:13 +0000 (12:37 +0000)]
Patch by Stefan Roese, 16 Sep 2004

15 years agoUpdate AR405 board.
stroese [Thu, 16 Sep 2004 12:34:51 +0000 (12:34 +0000)]
Update AR405 board.

15 years agoesd misc file esd common routines added.
stroese [Thu, 16 Sep 2004 12:33:54 +0000 (12:33 +0000)]
esd misc file esd common routines added.

15 years agoFix SysClk handling for PPChameleon and CATcenter boards
wdenk [Thu, 9 Sep 2004 17:44:35 +0000 (17:44 +0000)]
Fix SysClk handling for PPChameleon and CATcenter boards

15 years ago* Patch by Detlev Zundel, 08 Sep 2004: LABEL_2004_09_09_0000
wdenk [Wed, 8 Sep 2004 22:03:11 +0000 (22:03 +0000)]
* Patch by Detlev Zundel, 08 Sep 2004:
  Update etags build target

* Improve NetConsole support: add support for broadcast destination
  address and buffered input.

* Cleanup compiler warnings for GCC 3.3.x and later

* Fix problem in cmd_jffs2.c introduced by CFG_JFFS_SINGLE_PART patch

15 years agoAdd support for IDS "NC650" board LABEL_2004_08_29_0045
wdenk [Sat, 28 Aug 2004 22:45:57 +0000 (22:45 +0000)]
Add support for IDS "NC650" board

15 years ago* Add automatic update support for LWMON board LABEL_2004_08_28_2355
wdenk [Sat, 28 Aug 2004 21:09:14 +0000 (21:09 +0000)]
* Add automatic update support for LWMON board

* Enable MSDOS/VFAT filesystem support for LWMON board

* Clear Block Lock-Bits when erasing flash on LWMON board.

* Fix return code of "fatload" command

* Disable debugging for TQM5200 board

15 years ago* Patch by Martin Krause, 03 Aug 2004:
wdenk [Wed, 4 Aug 2004 21:56:49 +0000 (21:56 +0000)]
* Patch by Martin Krause, 03 Aug 2004:
  change timing for SM501 graphics controller on TQM5200 module

* Patch by Mark Jonas, 13 July 2004:
  - Total5200 LCD now run in little endian mode. Endianess conversion
    is done in hardware.
  - Removed last reference to "console" environment variable.

15 years agoPatches by Lars Munch, 12 Jul 2004:
wdenk [Mon, 2 Aug 2004 23:39:03 +0000 (23:39 +0000)]
Patches by Lars Munch, 12 Jul 2004:
- move at45.c to board/at91rm9200dk/ since this is at91rm9200dk
  board specific
- split out the LXT971A PHY from ns_9750_eth.h
- split the dm9161 phy part out of at91rm9200_ether.c

15 years ago* Patch by Andreas Engel, 12 Jul 2004:
wdenk [Mon, 2 Aug 2004 23:22:59 +0000 (23:22 +0000)]
* Patch by Andreas Engel, 12 Jul 2004:
  Replaced hardcoded PL011 clock frequency with config variable.
  Fixed wrong CONFIG_CMD_DFL doc.

* Patch by Thomas Viehweger, 09 Jun 2004:
  make it possible to remove chpart when there is only one partition

15 years agoAdd support for console over UDP (compatible to Ingo Molnar's
wdenk [Mon, 2 Aug 2004 21:11:11 +0000 (21:11 +0000)]
Add support for console over UDP (compatible to Ingo Molnar's
netconsole patch under Linux)

15 years agoPatch by Jon Loeliger, 16 Jul 2004:
wdenk [Sun, 1 Aug 2004 23:02:45 +0000 (23:02 +0000)]
Patch by Jon Loeliger, 16 Jul 2004:
- support larger DDR memories up to 2G on the PC8540/8560ADS and
  STXGP3 boards
- Made MPC8540/8560ADS be 33Mhz PCI by default.
- Removed moldy CONFIG_RAM_AS_FLASH, CFG_FLASH_PORT_WIDTH_16
  and CONFIG_L2_INIT_RAM options.
- Refactor Local Bus initialization out of SDRAM setup.
- Re-implement new version of LBC11/DDR11 errata workarounds.
- Moved board specific PCI init parts out of CPU directory.
- Added TLB entry for PCI-1 IO Memory
- Updated README.mpc85xxads

15 years ago* Code cleanup
wdenk [Sun, 1 Aug 2004 22:48:16 +0000 (22:48 +0000)]
* Code cleanup

* Patch by Sascha Hauer, 28 Jun:
  - add generic support for Motorola i.MX architecture
  - add support for mx1ads, mx1fs2 and scb9328 boards

* Patches by Marc Leeman, 23 Jul 2004:
  - Add define for the PCI/Memory Buffer Configuration Register
  - corrected comments in cpu/mpc824x/cpu_init.c

* Add support for multiple serial interfaces
  (for example to allow modem dial-in / dial-out)

15 years ago* Fix NSCU config; add ethernet wakeup code.
wdenk [Sun, 1 Aug 2004 13:09:47 +0000 (13:09 +0000)]
* Fix NSCU config; add ethernet wakeup code.

* Add link for preloader for Motorola Coldfire to RAEDME.m68k

15 years agoPatch by Stefan Roese, 15 Jul 2004
stroese [Thu, 15 Jul 2004 14:41:43 +0000 (14:41 +0000)]
Patch by Stefan Roese, 15 Jul 2004

15 years agocpu/ppc4xx/sdram.c rewritten now using get_ram_size()
stroese [Thu, 15 Jul 2004 14:41:13 +0000 (14:41 +0000)]
cpu/ppc4xx/sdram.c rewritten now using get_ram_size()

15 years agoPatch by Michael Bendzick, 12 Jul 2004:
wdenk [Mon, 12 Jul 2004 22:34:51 +0000 (22:34 +0000)]
Patch by Michael Bendzick, 12 Jul 2004:
fix output formatting in drivers/cfi_flash.c

15 years agoPatch by Mark Jonas, 02 Jul 2004:
wdenk [Mon, 12 Jul 2004 14:37:59 +0000 (14:37 +0000)]
Patch by Mark Jonas, 02 Jul 2004:
Fix lowboot (again) on MPC5xxx

15 years agoAdd cerf250 to MAINTAINERS and README
wdenk [Sun, 11 Jul 2004 22:37:59 +0000 (22:37 +0000)]
Add cerf250 to MAINTAINERS and README

15 years agoPatch by Curt Brune, 07 Jul 2004:
wdenk [Sun, 11 Jul 2004 22:27:55 +0000 (22:27 +0000)]
Patch by Curt Brune, 07 Jul 2004:
relocate exception vectors on arm720t if needed

15 years ago* Patch by George G. Davis, 06 Jul 2004:
wdenk [Sun, 11 Jul 2004 22:19:26 +0000 (22:19 +0000)]
* Patch by George G. Davis, 06 Jul 2004:
  - update mach-types.h to latest arm.linux.org.uk master list
  - Set correct OMAP1610 bi_arch_number for build target

* Patch by Curt Brune, 06 Jul 2004:
  evb4510: add support for timer interrupt; cleanup

15 years ago* Patch by Dan Poirot, 06 Jul 2004:
wdenk [Sun, 11 Jul 2004 21:49:42 +0000 (21:49 +0000)]
* Patch by Dan Poirot, 06 Jul 2004:
  Fix sbc8260 environment variables

* Cleanup redundand "console" environment variable

15 years ago* Cleanup
wdenk [Sun, 11 Jul 2004 20:04:51 +0000 (20:04 +0000)]
* Cleanup

* Patch by Mark Jonas, 05 Jul 2004:
  add support for the Total5100's and Total5200's LCD screen

* Patches by Dan Eisenhut, 01 Jul 2004:
  - README fixes.
  - Move doc2000.h include to prevent compiler warning on some boards

15 years agoPatch by Mark Jonas, 01 Jul 2004:
wdenk [Sun, 11 Jul 2004 19:17:20 +0000 (19:17 +0000)]
Patch by Mark Jonas, 01 Jul 2004:
Added support for Total5100 and Total5200 (Rev.1 and Rev.2)
MGT5100 and MPC5200 based Freescale platforms.

15 years ago* Patch by Philippe Robin, 01 Jul 2004:
wdenk [Sun, 11 Jul 2004 18:10:30 +0000 (18:10 +0000)]
* Patch by Philippe Robin, 01 Jul 2004:
  Add initialization for Integrator and versatile board files.

* Patch by Hinko Kocevar, 01 Jun 2004:
  Fix VFD FB allocation, add LCD FB allocation on ARM

15 years ago* Patch by Martin Krause, 30 Jun 2004:
wdenk [Sun, 11 Jul 2004 17:40:54 +0000 (17:40 +0000)]
* Patch by Martin Krause, 30 Jun 2004:
  Add support for TQM5200 board

* Patch by Martin Krause, 29 Jun 2004:
  Add loopw command: infinite write loop on address range

15 years agoPatches by Yasushi Shoji, 29 Jun 2004:
wdenk [Sat, 10 Jul 2004 23:48:41 +0000 (23:48 +0000)]
Patches by Yasushi Shoji, 29 Jun 2004:
- add empty include/asm-microblaze/processor.h
- add to CREDITS and MAINTAINERS
- add gd initialization
- add MicroBlaze and SUZAKU board to MAKEALL script
- add reset support for SUZAKU
- add flush_cache() for MicroBlaze
- add CFG_FLASH_SIZE to include/configs/suzaku.h since we have fixed
  size flash memory on SUZAKU

15 years ago* Patch by Prakash Kumar, 27 Jun 2004:
wdenk [Sat, 10 Jul 2004 23:11:10 +0000 (23:11 +0000)]
* Patch by Prakash Kumar, 27 Jun 2004:
  Add support for the PXA250 based Intrinsyc Cerf board.

* Patch by Yasushi Shoji, 27 Jun 2004:
  fix comment in include/common.h

15 years agoFix swapped config files.
wdenk [Sat, 10 Jul 2004 23:02:23 +0000 (23:02 +0000)]
Fix swapped config files.

15 years ago* Rename SBC8560 into sbc8560 for consistency
wdenk [Sat, 10 Jul 2004 22:35:59 +0000 (22:35 +0000)]
* Rename SBC8560 into sbc8560 for consistency

* Patch by Daniel Poirot, 24 Jun 2004:
  Add support for Wind River's sbc8240 board

* Patches by Yasushi Shoji, 26 Jun 2004:
  - drivers/serial_xuartlite.c: fix "return 0" in void function
  - add microblaze support to mkimage tool

15 years ago* Patch by Fred Klatt, 25 Jun 2004:
wdenk [Sat, 10 Jul 2004 21:45:47 +0000 (21:45 +0000)]
* Patch by Fred Klatt, 25 Jun 2004:
  Add support for WindRiver's SBC8560 board

* Patch by Nicolas Lacressonniere, 24 Jun 2004
  Small Bugs fixes for "at91rm9200dk" board:
  - Timing modifications for SPI DataFlash access
  - Fix NAND flash detection bug

* Patch by Nicolas Lacressonniere, 24 Jun 2004:
  Add Support for Flash AT49BV6416 for AT91RM9200DK board

15 years agoPatch by Jon Loeliger, 17 June 2004:
wdenk [Fri, 9 Jul 2004 23:27:13 +0000 (23:27 +0000)]
Patch by Jon Loeliger, 17 June 2004:
Completion of the 8540ADS/8560ADS updates:
Fix some PCI and Rapid I/O memory maps,
Initialize both TSEC 1 and 2,
Initialize SDRAM
Update MAINTAINER for 85xx boards and README.mpc85xxads

15 years ago* Patch by Yuli Barcohen, 16 Jun 2004:
wdenk [Fri, 9 Jul 2004 22:51:01 +0000 (22:51 +0000)]
* Patch by Yuli Barcohen, 16 Jun 2004:
  Remove obsolete AdderII port which was superseded by unified
  AdderII/Adder87x port

* Patch by Ladislav Michl, 16 Jun 2004:
  Fix gcc-3.3.3 warnings for smc91111.c

15 years agoPatch by Stefan Roese, 02 Jul 2004
stroese [Fri, 2 Jul 2004 14:38:26 +0000 (14:38 +0000)]
Patch by Stefan Roese, 02 Jul 2004

15 years agoFix problem in 405 i2c driver; don't try to print without console!
stroese [Fri, 2 Jul 2004 14:37:04 +0000 (14:37 +0000)]
Fix problem in 405 i2c driver; don't try to print without console!

15 years agoFix bug in 405 ethernet driver; allocated data not cleared!
stroese [Fri, 2 Jul 2004 14:36:35 +0000 (14:36 +0000)]
Fix bug in 405 ethernet driver; allocated data not cleared!

15 years agoPatch by Paul Ruhland, 11 Jun 2004:
wdenk [Thu, 1 Jul 2004 22:02:29 +0000 (22:02 +0000)]
Patch by Paul Ruhland, 11 Jun 2004:
Remove debug code from 'board/lpd7a40x/flash.c'

15 years agoPatch by Andrea Marson, 11 Jun 2004:
wdenk [Thu, 1 Jul 2004 21:40:08 +0000 (21:40 +0000)]
Patch by Andrea Marson, 11 Jun 2004:
Update for PPChameleon board:
- support for SysClk @ 25MHz
- support for Silicon Motion SM712 VGA controller
- some clean ups

15 years ago* Patches by Richard Woodruff, 10 Jun 2004:
wdenk [Thu, 1 Jul 2004 20:28:03 +0000 (20:28 +0000)]
* Patches by Richard Woodruff, 10 Jun 2004:
  - fix problems with examples/stubs.c for GCC >= 3.4
  - fix problems with gd initialization

* Enable FAT filesystem support for HMI10 board

15 years ago* Code cleanup (ARM mostly)
wdenk [Thu, 1 Jul 2004 16:30:44 +0000 (16:30 +0000)]
* Code cleanup (ARM mostly)

* Patch by Curt Brune, 17 May 2004:
  - Add support for Samsung S3C4510B CPU (ARM7tdmi based SoC)
  - Add support for ESPD-Inc. EVB4510 Board

15 years ago* Fix "cls" command when used with splash screen LABEL_2004_07_01_1200
wdenk [Wed, 30 Jun 2004 22:59:18 +0000 (22:59 +0000)]
* Fix "cls" command when used with splash screen

* Increase NFS download timeout (now 1 min - 10 sec is to short for a
  slow download of a big image)

15 years agoAdd "cls" function to MPC823 LCD driver so we can reinitialize the
wdenk [Fri, 25 Jun 2004 23:35:58 +0000 (23:35 +0000)]
Add "cls" function to MPC823 LCD driver so we can reinitialize the
display even after showing a bitmap

15 years agoAdd MicroSys maintainer. LABEL_2004_06_24_1800
wdenk [Thu, 24 Jun 2004 15:54:37 +0000 (15:54 +0000)]
Add MicroSys maintainer.

15 years agoPatch by Josef Wagner, 04 Jun 2004:
wdenk [Sat, 19 Jun 2004 21:19:10 +0000 (21:19 +0000)]
Patch by Josef Wagner, 04 Jun 2004:
- DDR Ram support for PM520 (MPC5200)
- support for different flash types (PM520)
- USB / IDE / CF-Card / DiskOnChip support for PM520
- 8 bit boot rom support for PM520/CE520
- Add auto SDRAM module detection for MicroSys CPC45 board (MPC8245)
- I2C and RTC support for CPC45
- support of new flash type (28F160C3T) for CPC45

15 years ago* Fix flash parameters passed to Linux for PPChameleon board
wdenk [Thu, 17 Jun 2004 18:50:45 +0000 (18:50 +0000)]
* Fix flash parameters passed to Linux for PPChameleon board

* Remove eth_init() from lib_arm/board.c; it's done in net.net.c.

15 years ago* Patch by Paul Ruhland, 10 Jun 2004:
wdenk [Thu, 10 Jun 2004 21:55:33 +0000 (21:55 +0000)]
* Patch by Paul Ruhland, 10 Jun 2004:
  fix support for Logic SDK-LH7A404 board and clean up the
  LH7A404 register macros.

* Patch by Matthew McClintock, 10 Jun 2004:
  Modify code to select correct serial clock on Sandpoint8245

15 years ago* Patch by Robert Schwebel, 10 Jun 2004:
wdenk [Thu, 10 Jun 2004 21:34:36 +0000 (21:34 +0000)]
* Patch by Robert Schwebel, 10 Jun 2004:
  Add support for Intel K3 strata flash.

* Some cleanup

* Patch by Thomas Brand, 10 Jun 2004:
  Fix "loads" command on DK1S10 board

15 years agoRemove duplicate entry
wdenk [Wed, 9 Jun 2004 22:52:57 +0000 (22:52 +0000)]
Remove duplicate entry

15 years agoPatch by Yuli Barcohen, 09 Jun 2004:
wdenk [Wed, 9 Jun 2004 21:54:22 +0000 (21:54 +0000)]
Patch by Yuli Barcohen, 09 Jun 2004:
Add support for 8MB flash SIMM and JFFS2 file system on
Motorola FADS board and its derivatives (MPC86xADS, MPC885ADS).

15 years ago* Patch by Yuli Barcohen, 09 Jun 2004:
wdenk [Wed, 9 Jun 2004 21:50:45 +0000 (21:50 +0000)]
* Patch by Yuli Barcohen, 09 Jun 2004:
  Add support for Analogue&Micro Adder87x and the older AdderII board.

* Patch by Ming-Len Wu, 09 Jun 2004:
  Add suppport for MC9328 (Dargonball) CPU and Motorola MX1ADS board

15 years agoPatch by Sam Song, 09 Jun 2004:
wdenk [Wed, 9 Jun 2004 21:04:48 +0000 (21:04 +0000)]
Patch by Sam Song, 09 Jun 2004:
- Add support for RPXlite_DW board
- Update FLASH driver for 4*AM29DL323DB90VI
- Add option configuration of CFG_ENV_IS_IN_NVRAM on RPXlite_DW board

15 years ago* Patch by Mark Jonas, 08 June 2004:
wdenk [Wed, 9 Jun 2004 17:45:32 +0000 (17:45 +0000)]
* Patch by Mark Jonas, 08 June 2004:
  - Make MPC5200 boards evaluate the SVR to print processor name and
    version in checkcpu() (cpu/mpc5xxx/cpu.c).

* Patch by Kai-Uwe Bloem, 06 May 2004:
  Fix endianess problem in cramfs code

15 years ago* Patch by Tom Armistead, 04 Jun 2004:
wdenk [Wed, 9 Jun 2004 17:34:58 +0000 (17:34 +0000)]
* Patch by Tom Armistead, 04 Jun 2004:
  Add support for MAX6900 RTC

* Patches by Ladislav Michl, 03 Jun 2004:
  - fix cfi_flash.c on LE systems
  - let 'make mrproper' delete u-boot.img as well
  - turn printf into debug in cfi_flash.c

15 years agoPatch by Kurt Stremerch, 28 May 2004:
wdenk [Wed, 9 Jun 2004 15:37:23 +0000 (15:37 +0000)]
Patch by Kurt Stremerch, 28 May 2004:
Add support for Exys XSEngine board

Some code cleanup.

15 years ago* Patch by Martin Krause, 27 May 2004:
wdenk [Wed, 9 Jun 2004 15:29:49 +0000 (15:29 +0000)]
* Patch by Martin Krause, 27 May 2004:
  Fix a MPC5xxx I2C timing issue in i2c_probe().

* Patch by Leif Lindholm, 27 May 2004:
  Fix board_init_f() for dbau1x00 board.

15 years ago* Patch by Imre Deak, 26 May 2004:
wdenk [Wed, 9 Jun 2004 15:25:53 +0000 (15:25 +0000)]
* Patch by Imre Deak, 26 May 2004:
  On OMAP1610 platforms check if booting from RAM(CS0) or flash(CS3).
  Set flash base accordingly, and decide whether to do or skip board
  specific setup steps.

* Patch by Josef Baumgartner, 26 May 2004:
  Add missing define in include/asm-m68k/global_data.h

15 years ago* Patch by Josef Baumgartner, 25 May 2004:
wdenk [Wed, 9 Jun 2004 15:24:18 +0000 (15:24 +0000)]
* Patch by Josef Baumgartner, 25 May 2004:
  Add missing functions get_ticks() and get_tbclk() in lib_m68k/time.c

* Patch by Paul Ruhland, 24 May 2004:
  fix SDRAM initialization for LPD7A400 board.

15 years agoPatch by Jian Zhang, 20 May 2004:
wdenk [Wed, 9 Jun 2004 14:58:14 +0000 (14:58 +0000)]
Patch by Jian Zhang, 20 May 2004:
add support for environment in NAND flash

15 years agoPatch by Yuli Barcohen, 20 May 2004:
wdenk [Wed, 9 Jun 2004 14:47:54 +0000 (14:47 +0000)]
Patch by Yuli Barcohen, 20 May 2004:
Add support for Interphase iSPAN boards.

15 years ago* Patch by Paul Ruhland, 17 May 2004:
wdenk [Wed, 9 Jun 2004 13:37:52 +0000 (13:37 +0000)]
* Patch by Paul Ruhland, 17 May 2004:
  - Add support for the Logic Zoom LH7A40x based SDK board(s),
    specifically the LPD7A400.

* Patches by Robert Schwebel, 15 May 2004:
  - call MAC address reading code also for SMSC91C111;
  - make SMSC91C111 timeout configurable, remove duplicate code
  - fix get_timer() for PXA
  - update doc/README.JFFS2
  - use "bootfile" env variable also for jffs2

15 years agoPatch by Tolunay Orkun, 14 May 2004:
wdenk [Wed, 9 Jun 2004 12:47:02 +0000 (12:47 +0000)]
Patch by Tolunay Orkun, 14 May 2004:
Add support for Cogent CSB472 board (8MB Flash Rev)

15 years agoPatch by Thomas Viehweger, 14 May 2004:
wdenk [Wed, 9 Jun 2004 12:42:26 +0000 (12:42 +0000)]
Patch by Thomas Viehweger, 14 May 2004:
- flash.h: more flash types added
- immap_8260.h: some bits added (useful for RMII)
- cmd_coninfo.c: typo corrected, printf -> puts
- reduced size by replacing spaces with tab

15 years agoPatch by Robert Schwebel, 13 May 2004:
wdenk [Wed, 9 Jun 2004 10:15:00 +0000 (10:15 +0000)]
Patch by Robert Schwebel, 13 May 2004:
Add 'imgextract' command: extract one part of a multi file image.

15 years agoPatches by Jon Loeliger, 11 May 2004:
wdenk [Wed, 9 Jun 2004 00:51:50 +0000 (00:51 +0000)]
Patches by Jon Loeliger, 11 May 2004:
(partially, as they contained a lot of crap)

15 years agoPatches Part 1 by Jon Loeliger, 11 May 2004:
wdenk [Wed, 9 Jun 2004 00:34:46 +0000 (00:34 +0000)]
Patches Part 1 by Jon Loeliger, 11 May 2004:
Dynamically handle REV1 and REV2 MPC85xx parts.
  (Jon Loeliger, 10-May-2004).
New consistent memory map and Local Access Window across MPC85xx line.
New CCSRBAR at 0xE000_0000 now.
Add RAPID I/O memory map.
New memory map in README.MPC85xxads
  (Kumar Gala, 10-May-2004)
Better board and CPU identification on MPC85xx boards at boot.
  (Jon Loeliger, 10-May-2004)
SDRAM clock control fixes on MPC8540ADS & MPC8560 boards.
Some configuration options for MPC8540ADS & MPC8560ADS cleaned up.
  (Jim Robertson, 10-May-2004)
Rewrite of the MPC85xx Three Speed Ethernet Controller (TSEC) driver.
Supports multiple PHYs.
  (Andy Fleming, 10-May-2004)
Some README.MPC85xxads updates.
  (Kumar Gala, 10-May-2004)
Copyright updates for "Freescale"
  (Andy Fleming, 10-May-2004)