karo-tx-uboot.git
10 years agoCoding Style cleanup; update CHANGELOG, prepare -rc1 v2009.11-rc1
Wolfgang Denk [Tue, 27 Oct 2009 23:49:47 +0000 (00:49 +0100)]
Coding Style cleanup; update CHANGELOG, prepare -rc1

Signed-off-by: Wolfgang Denk <wd@denx.de>
10 years agoAdd 'editenv' command
Peter Tyser [Sun, 25 Oct 2009 20:12:56 +0000 (15:12 -0500)]
Add 'editenv' command

The editenv command can be used to edit an environment variable.
Editing an environment variable is useful when one wants to tweak an
existing variable, for example fix a typo or change the baudrate in the
'bootargs' environment variable.

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
10 years agosetenv(): Delete 0-length environment variables
Peter Tyser [Sun, 25 Oct 2009 20:12:55 +0000 (15:12 -0500)]
setenv(): Delete 0-length environment variables

Previously setenv() would only delete an environment variable if it
was passed a NULL string pointer as a value.  It should also delete an
environment variable when it encounters a valid string pointer of
0-length.

This change/fix is generally useful and is necessary for the upcoming
"editenv" command.

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
10 years agoreadline(): Add ability to modify a string buffer
Peter Tyser [Sun, 25 Oct 2009 20:12:54 +0000 (15:12 -0500)]
readline(): Add ability to modify a string buffer

If the 'buf' parameter is a non-0-length string, its contents will be
edited.  Previously, the initial contents of 'buf' were ignored and the
user entered its contents from scratch.

This change is necessary to support the upcoming "editenv" command but
could also be used for future commands which require a user to modify
an existing string.

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
10 years agocread_line(): Remove unused variables
Peter Tyser [Sun, 25 Oct 2009 20:12:53 +0000 (15:12 -0500)]
cread_line(): Remove unused variables

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
10 years agoCheck for NULL prompt in readline_into_buffer()
Peter Tyser [Sun, 25 Oct 2009 20:12:52 +0000 (15:12 -0500)]
Check for NULL prompt in readline_into_buffer()

Previously, passing readline() or readline_into_buffer() a NULL 'prompt'
parameter would result in puts() printing garbage when
CONFIG_CMDLINE_EDITING was enabled.

Note that no board currently triggers this bug.  Enabling
CONFIG_CMDLINE_EDITING on some boards (eg bab7xx) would result in
the bug appearing.  This change is only intended to prevent someone
from running into this issue in the future.

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
10 years agodrivers/net/phy/miiphybb.c: fix warning: no newline at end of file
Wolfgang Denk [Sun, 25 Oct 2009 22:00:09 +0000 (23:00 +0100)]
drivers/net/phy/miiphybb.c: fix warning: no newline at end of file

Add missing newline.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Luigi Mantellini <luigi.mantellini@idf-hit.com>
Cc: Ben Warren <biggerbadderben@gmail.com>
10 years agoMerge branch 'master' of git://git.denx.de/u-boot-mpc85xx
Wolfgang Denk [Tue, 27 Oct 2009 19:56:31 +0000 (20:56 +0100)]
Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx

10 years agoRevert "env: only build env_embedded and envcrc when needed"
Wolfgang Denk [Mon, 26 Oct 2009 23:03:32 +0000 (00:03 +0100)]
Revert "env: only build env_embedded and envcrc when needed"

Breaks building on many boards, and no really clean fix available yet.

This reverts commit 6dab6add2d8ee80905234b326abc3de11be1d178.

10 years agompc85xx: Configure QE USB for MPC8569E-MDS boards
Anton Vorontsov [Thu, 15 Oct 2009 13:47:16 +0000 (17:47 +0400)]
mpc85xx: Configure QE USB for MPC8569E-MDS boards

Setup QE pin multiplexing for USB function, configure needed BCSRs
and add some fdt fixups.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
10 years agompc85xx: Configure QE UART for MPC8569E-MDS boards
Anton Vorontsov [Thu, 15 Oct 2009 13:47:13 +0000 (17:47 +0400)]
mpc85xx: Configure QE UART for MPC8569E-MDS boards

To make QE UART usable by Linux we should setup pin multiplexing
and turn UCC2 Ethernet node into UCC2 QE UART node.

Also, QE UART is mutually exclusive with UART0, so we can't enable
it if eSDHC is in 4-bits mode on pilot boards, or if it's a prototype
board with eSDHC in 1- or 4-bits mode.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
10 years agompc85xx: Setup QE pinmux for SPI Flash on MPC8569E-MDS boards
Anton Vorontsov [Thu, 15 Oct 2009 13:47:11 +0000 (17:47 +0400)]
mpc85xx: Setup QE pinmux for SPI Flash on MPC8569E-MDS boards

SPI Flash (M25P40) is connected to the SPI1 bus, we need a few
qe_iop entries to actually enable SPI1 on these boards.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
10 years agompc85xx: Setup SRIO memory region LAW for MPC8569E-MDS boards
Anton Vorontsov [Thu, 15 Oct 2009 13:47:09 +0000 (17:47 +0400)]
mpc85xx: Setup SRIO memory region LAW for MPC8569E-MDS boards

This patch sets memory window for Serial RapidIO on MPC8569E-MDS
boards.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
10 years agompc85xx: Add eLBC NAND support for MPC8569E-MDS boards
Anton Vorontsov [Thu, 15 Oct 2009 13:47:08 +0000 (17:47 +0400)]
mpc85xx: Add eLBC NAND support for MPC8569E-MDS boards

Simply add some defines, and adjust TLBe setup to include some
space for eLBC NAND.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
10 years agompc85xx: Add eSDHC support for MPC8569E-MDS boards
Anton Vorontsov [Thu, 15 Oct 2009 13:47:06 +0000 (17:47 +0400)]
mpc85xx: Add eSDHC support for MPC8569E-MDS boards

eSDHC is mutually exlusive with UART0 (in 4-bits mode) and I2C2
(in 1-bit mode). When eSDHC is used, we should switch u-boot console to
UART1, and make the proper device-tree fixups.

Because of an erratum in prototype boards it is impossible to use eSDHC
without disabling UART0 (which makes it quite easy to 'brick' the board
by simply issung 'setenv hwconfig esdhc', and not able to interact with
U-Boot anylonger).

So, but default we assume that the board is a prototype, which is a most
safe assumption. There is no way to determine board revision from a
register, so we use hwconfig.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
10 years agoxpedite5370: Enable multi-core support
Peter Tyser [Fri, 23 Oct 2009 20:55:48 +0000 (15:55 -0500)]
xpedite5370: Enable multi-core support

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
10 years ago85xx: MP Boot Page Translation update
Peter Tyser [Fri, 23 Oct 2009 20:55:47 +0000 (15:55 -0500)]
85xx: MP Boot Page Translation update

This change has 3 goals:
- Have secondary cores be released into spin loops at their 'true'
  address in SDRAM.  Previously, secondary cores were put into spin
  loops in the 0xfffffxxx address range which required that boot page
  translation was always enabled while cores were in their spin loops.

- Allow the TLB window that the primary core uses to access the
  secondary cores boot page to be placed at any address.  Previously, a
  TLB window at 0xfffff000 was always used to access the seconary cores'
  boot page.  This TLB address requirement overlapped with other
  peripherals on some boards (eg XPedite5370).  By default, the boot
  page TLB will still use the 0xfffffxxx address range, but this can be
  overridden on a board-by-board basis by defining a custom
  CONFIG_BPTR_VIRT_ADDR.  Note that the TLB used to map the boot page
  remains in use while U-Boot executes.  Previously it was only
  temporarily used, then restored to its initial value.

- Allow Boot Page Translation to be disabled on bootup.  Previously,
  Boot Page Translation was always left enabled after secondary cores
  were brought out of reset.  This caused the 0xfffffxxx address range
  to somewhat "magically" be translated to an address in SDRAM.  Some
  boards may not want this oddity in their memory map, so defining
  CONFIG_MPC8xxx_DISABLE_BPTR will turn off Boot Page Translation after
  the secondary cores are initialized.

These changes are only applicable to 85xx boards with CONFIG_MP defined.

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
10 years agoppc/85xx/pci: fsl_pci_init: pcie agent mode support
Vivek Mahajan [Tue, 27 Oct 2009 06:48:55 +0000 (12:18 +0530)]
ppc/85xx/pci: fsl_pci_init: pcie agent mode support

Originally written by Jason Jin and Mingkai Hu for mpc8536.

When QorIQ based board is configured as a PCIe agent, then unlock/enable
inbound PCI configuration cycles and init a 4K inbound memory window;
so that a PCIe host can access the PCIe agents SDRAM at address 0x0

* Supported in fsl_pci_init_port() after adding pcie_ep as a param
* Revamped copyright in drivers/pci/fsl_pci_init.c
* Mods in 85xx based board specific pci init after this change

Signed-off-by: Vivek Mahajan <vivek.mahajan@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
10 years ago85xx/p1_p2_rdb: Fixing DDR configuration for 800MHz data rate
Poonam Aggrwal [Tue, 27 Oct 2009 04:06:38 +0000 (09:36 +0530)]
85xx/p1_p2_rdb: Fixing DDR configuration for 800MHz data rate

Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
10 years ago85xx/p1_p2rdb: Fix crash while configuring 32 bit DDR i/f for P1020RDB.
Poonam Aggrwal [Tue, 27 Oct 2009 03:56:55 +0000 (09:26 +0530)]
85xx/p1_p2rdb: Fix crash while configuring 32 bit DDR i/f for P1020RDB.

The data being modified was in NOR flash which caused the crash.

Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
10 years agofdt_support: Add multi-serial support for stdout fixup
Anton Vorontsov [Thu, 15 Oct 2009 13:47:04 +0000 (17:47 +0400)]
fdt_support: Add multi-serial support for stdout fixup

Currently fdt_fixup_stdout() is using hard-coded CONFIG_CONS_INDEX
constant. With multi-serial support, the CONS_INDEX may no longer
represent actual console, so we should try to extract port number
from the current stdio device name instead of always hard-coding the
constant value.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Acked-by: Gerald Van Baren <vanbaren@cideas.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
10 years agoppc/85xx: Fix crashes due to generation of SPE instruction
Leon Woestenberg [Mon, 26 Oct 2009 09:03:32 +0000 (10:03 +0100)]
ppc/85xx: Fix crashes due to generation of SPE instruction

U-Boot crashed on the last instruction:

int parse_stream_outer(struct in_str *inp, int flag)
{
effa4784:       94 21 ff 38     stwu    r1,-200(r1)
effa4788:       7c 08 02 a6     mflr    r0
effa478c:       42 9f 00 05     bcl-    20,4*cr7+so,effa4790 <parse_stream_outer+0xc>
effa4790:       7d 80 00 26     mfcr    r12
effa4794:       13 c1 b3 21     evstdd  r30,176(r1)

...which is a  SPE instruction, although -mno-spe was used.

tmp/cross/ppce500v2/bin/powerpc-angstrom-linux-gnuspe-gcc --version
powerpc-angstrom-linux-gnuspe-gcc (GCC) 4.3.3

Seems to be a known issue (since 2008-04?!)

Googled some, turns out this patch/workaround works for me on MPC8536DS.

See http://gcc.gnu.org/ml/gcc-patches/2008-04/msg00311.html for more info

Signed-off-by: Leon Woestenberg <leon@sidebranch.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
10 years agoppc/85xx: Make L2 support more robust
Dave Liu [Thu, 22 Oct 2009 05:10:23 +0000 (00:10 -0500)]
ppc/85xx: Make L2 support more robust

According the user manual, we need loop-check the L2 enable bit set.

Signed-off-by: Dave Liu <daveliu@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
10 years agoppc/85xx: Fix compiler warning in nand_spl/.../p1_p2_rdb/nand_boot.c
Kumar Gala [Tue, 27 Oct 2009 02:21:25 +0000 (21:21 -0500)]
ppc/85xx: Fix compiler warning in nand_spl/.../p1_p2_rdb/nand_boot.c

nand_boot.c: In function 'board_init_f':
nand_boot.c:44: warning: 'sys_clk' may be used uninitialized in this function

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
10 years agoppc/85xx: Fix building NAND_SPL out of tree
Kumar Gala [Tue, 27 Oct 2009 02:18:33 +0000 (21:18 -0500)]
ppc/85xx: Fix building NAND_SPL out of tree

We need to source files to exist in the O=<FOO> nand_spl dir when
we build out of tree.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
10 years agoLicense cleanup: Fix license header for some esd display configurations
Matthias Fuchs [Fri, 23 Oct 2009 08:52:38 +0000 (10:52 +0200)]
License cleanup: Fix license header for some esd display configurations

These files were autogenerated by EPSON configuration tools.
This patch replaces the autogenerated file headers by the GPL
license notice.

This change is done with the explicit permission
of Epson Research & Development / IC Software Development.

Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu>
10 years agosf: add GPL-2 license info
Mike Frysinger [Fri, 9 Oct 2009 21:12:44 +0000 (17:12 -0400)]
sf: add GPL-2 license info

Some of the new spi flash files were missing explicit license lines.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
CC: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
10 years agofdt: Fix fdt padding issue for initrd mem_rsv
Kumar Gala [Thu, 22 Oct 2009 04:29:51 +0000 (23:29 -0500)]
fdt: Fix fdt padding issue for initrd mem_rsv

Its possible that we end up with a device tree that happens to be a
particular size that after we call fdt_resize() we don't have any
space left for the initrd mem_rsv.

Fix this be adding a second mem_rsv into the size calculation.  We
had one to cover the fdt itself and we have the potential of adding
a second for the initrd.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Acked-by: Gerald Van Baren <vanbaren@cideas.com>
10 years agoMerge branch 'master' of /home/wd/git/u-boot/custodians
Wolfgang Denk [Sat, 24 Oct 2009 20:26:42 +0000 (22:26 +0200)]
Merge branch 'master' of /home/wd/git/u-boot/custodians

10 years agoMerge branch 'master-sync' of git://git.denx.de/u-boot-arm
Wolfgang Denk [Sat, 24 Oct 2009 20:26:09 +0000 (22:26 +0200)]
Merge branch 'master-sync' of git://git.denx.de/u-boot-arm

10 years agoMerge branch 'master' of /home/wd/git/u-boot/custodians
Wolfgang Denk [Sat, 24 Oct 2009 20:25:11 +0000 (22:25 +0200)]
Merge branch 'master' of /home/wd/git/u-boot/custodians

10 years agoMerge branch 'master' of git://git.denx.de/u-boot-ppc4xx
Wolfgang Denk [Sat, 24 Oct 2009 20:25:08 +0000 (22:25 +0200)]
Merge branch 'master' of git://git.denx.de/u-boot-ppc4xx

10 years agoMerge branch 'master' of /home/wd/git/u-boot/custodians
Wolfgang Denk [Sat, 24 Oct 2009 20:19:54 +0000 (22:19 +0200)]
Merge branch 'master' of /home/wd/git/u-boot/custodians

10 years agoMerge branch 'master' of git://git.denx.de/u-boot-mpc83xx
Wolfgang Denk [Sat, 24 Oct 2009 20:19:46 +0000 (22:19 +0200)]
Merge branch 'master' of git://git.denx.de/u-boot-mpc83xx

10 years agoMerge branch 'master' of /home/wd/git/u-boot/custodians
Wolfgang Denk [Sat, 24 Oct 2009 20:16:22 +0000 (22:16 +0200)]
Merge branch 'master' of /home/wd/git/u-boot/custodians

10 years agoARM: OMAP3: Refactors the SM911x driver
Steve Sakoman [Tue, 20 Oct 2009 16:21:18 +0000 (18:21 +0200)]
ARM: OMAP3: Refactors the SM911x driver

Move the test up in the function to not hang on systems without ethernet.

Signed-off-by: Steve Sakoman <sakoman@gmail.com>
Acked-by: Ben Warren <biggerbadderben@gmail.com>
10 years agos5pc1xx: SMDKC100: fix compile warnings
Minkyu Kang [Thu, 15 Oct 2009 02:19:15 +0000 (11:19 +0900)]
s5pc1xx: SMDKC100: fix compile warnings

fix the following compile warnings
warning: dereferencing type-punned pointer will break strict-aliasing rules

Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
10 years agoarm926ejs: 8-byte align stack to avoid LDRD/STRD problems
Simon Kagstrom [Tue, 6 Oct 2009 06:44:22 +0000 (08:44 +0200)]
arm926ejs: 8-byte align stack to avoid LDRD/STRD problems

U-boot for Marvell Kirkwood boards no longer work after the EABI changes
introduced in commit f772acf8a584067033eff1e231fcd1fb3a00d3d9. This
turns out to be caused by a stack alignment issue. The armv5te
instructions ldrd/strd instructions require 8-byte alignment to work
properly (otherwise undefined behavior).

Tested on an OpenRD base board, where both printouts and ubifs stuff now
works.

Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
10 years agoTI OMAP3 SDP3430: Initial Support
Tom Rix [Sat, 17 Oct 2009 17:41:06 +0000 (12:41 -0500)]
TI OMAP3 SDP3430: Initial Support

Start of support of
Texas Instruments Software Development Platform(SDP)
for OMAP3430 - SDP3430

Highlights of this platform are:
Flash Memory devices:
Sibley NOR, Micron 8bit NAND and OneNAND
Connectivity:
3 UARTs and expanded 4 UART ports + IrDA
Ethernet, USB
Other peripherals:
TWL5030 PMIC+Audio+Keypad
VGA display
Expansion ports:
Memory devices plugin boards (PISMO)
Connectivity board for GPS,WLAN etc.
Completely configurable boot sequence and device mapping
etc.

Support default jumpering and:
 - UART1/ttyS0 console(legacy sdp3430 u-boot)
 - UART3/ttyS2 console (matching other boards,
 and SDP HW docs)
 - Ethernet
 - mmc0
 - NOR boot

Currently the UART1 is enabled by default.  for
compatibility with other OMAP3 u-boot platforms,
enable the #define of CONSOLE_J9.

Conflicts:

Makefile

Fixed the conflict with smdkc100_config by moving omap_sdp3430_config
to it is alphabetically sorted location above zoom1.

Signed-off-by: David Brownell <david-b@pacbell.net>
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
10 years agoTI DaVinci: Adding Copyright for DM365 EVM
Sandeep Paulraj [Tue, 13 Oct 2009 23:35:11 +0000 (19:35 -0400)]
TI DaVinci: Adding Copyright for DM365 EVM

Forgot to add Copyright while submitting the patch.
This patch adds the copyright.

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
10 years agoTI DaVinci: Fix DM6467 EVM Compilation Warning
Sandeep Paulraj [Tue, 13 Oct 2009 16:32:32 +0000 (12:32 -0400)]
TI DaVinci: Fix DM6467 EVM Compilation Warning

Due to new TI boards being added to U-Boot, the hardware.h
is getting very messy. The warning being fixed is due to
the EMIF addresses being redefined.

The long term solution(after 2009.11) to this is to
have SOC specific header files.

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
10 years agoTI DaVinci: DM355 Leopard: Fix compilation warning
Sandeep Paulraj [Tue, 13 Oct 2009 16:01:52 +0000 (12:01 -0400)]
TI DaVinci: DM355 Leopard: Fix compilation warning

We get a compliation warning when we enable the NAND driver
for DM355 leopard. The waring we get is that we have
an implicit declaration of davinci_nand_init.

It is fixed by including the asm/arch/nand_defs.h header file

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
10 years agoTI OMAP3: make gpmc_config as const
Nishanth Menon [Tue, 13 Oct 2009 16:49:55 +0000 (12:49 -0400)]
TI OMAP3: make gpmc_config as const

gpmc_config should not be a variant as it is board specific
hence make it a const parameter

Fixes issues identified by Dirk:
- build issue for zoom2
- warnings for all other OMAP3 platforms using nand/onenand etc

Signed-off-by: Nishanth Menon <nm@ti.com>
10 years agoppc4xx: Sequoia: Add chip_config command
Stefan Roese [Mon, 19 Oct 2009 14:19:36 +0000 (16:19 +0200)]
ppc4xx: Sequoia: Add chip_config command

This patch removes the Sequoia "bootstrap" command and replaces it
with the now common command "chip_config".

Please note that the patches with the dynamic PCI sync clock
configuration have to be applied, before this one should go in.
This is because Sequoia has 2 different bootstrap EEPROMs, and
the old bootstrap command configured different values depending
on the detected PCI async clock (33 vs. 66MHz). With the PCI sync
clock patches, this is not necessary anymore. The PCI sync clock
will be configured correctly on-the-fly now.

Signed-off-by: Stefan Roese <sr@denx.de>
10 years agoppc4xx: Yosemite/Yellowstone: Check and reconfigure the PCI sync clock
Stefan Roese [Mon, 19 Oct 2009 12:14:08 +0000 (14:14 +0200)]
ppc4xx: Yosemite/Yellowstone: Check and reconfigure the PCI sync clock

This patch now uses the 440EP(x)/GR(x) function to check and dynamically
reconfigure the PCI sync clock.

Signed-off-by: Stefan Roese <sr@denx.de>
10 years agoppc4xx: Sequoia/Rainer: Check and reconfigure the PCI sync clock
Stefan Roese [Mon, 19 Oct 2009 12:10:50 +0000 (14:10 +0200)]
ppc4xx: Sequoia/Rainer: Check and reconfigure the PCI sync clock

This patch now uses the 440EP(x)/GR(x) function to check and dynamically
reconfigure the PCI sync clock.

Signed-off-by: Stefan Roese <sr@denx.de>
10 years agoppc4xx: Print PCI synchronous clock frequency upon bootup
Stefan Roese [Mon, 19 Oct 2009 12:44:11 +0000 (14:44 +0200)]
ppc4xx: Print PCI synchronous clock frequency upon bootup

Some 4xx variants (e.g. 440EP(x)/GR(x)) have an internal
synchronous PCI clock. Knowledge about the currently configured
value might be helpful. So let's print it out upon bootup.

Signed-off-by: Stefan Roese <sr@denx.de>
10 years agoppc4xx: Add function to check and dynamically change PCI sync clock
Stefan Roese [Mon, 19 Oct 2009 12:06:23 +0000 (14:06 +0200)]
ppc4xx: Add function to check and dynamically change PCI sync clock

PPC440EP(x)/PPC440GR(x):
In asynchronous PCI mode, the synchronous PCI clock must meet
certain requirements. The following equation describes the
relationship that must be maintained between the asynchronous PCI
clock and synchronous PCI clock. Select an appropriate PCI:PLB
ratio to maintain the relationship:

AsyncPCIClk - 1MHz <= SyncPCIclock <= (2 * AsyncPCIClk) - 1MHz

This patch now adds a function to check and reconfigure the sync
PCI clock to meet this requirement. This is in preparation for
some AMCC boards (Sequoia/Rainier and Yosemite/Yellowstone) using this
function to not violate the PCI clocking rules.

Signed-off-by: Stefan Roese <sr@denx.de>
10 years agoppc4xx: Update flash size in reg property of the NOR flash node
Stefan Roese [Fri, 16 Oct 2009 08:01:09 +0000 (10:01 +0200)]
ppc4xx: Update flash size in reg property of the NOR flash node

Till now only the ranges in the ebc node are updated with the values
currently configured in the PPC4xx EBC controller. With this patch now
the NOR flash size is updated in the device tree blob as well. This is
done by scanning the compatible nodes "cfi-flash" and "jedec-flash"
for the correct chip select number.

This size fixup is enabled for all AMCC eval board right now. Other
4xx boards may want to enable it as well, if this problem with multiple
NOR FLASH sizes exists.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Wolfgang Denk <wd@denx.de>
10 years agofdt: Add fdt_fixup_nor_flash_size() to fixup NOR FLASH size in dtb
Stefan Roese [Wed, 21 Oct 2009 09:59:52 +0000 (11:59 +0200)]
fdt: Add fdt_fixup_nor_flash_size() to fixup NOR FLASH size in dtb

This function can be used to update the size in the "reg" property
of the NOR FLASH device nodes. This is necessary for boards with
non-fixed NOR FLASH sizes.

Signed-off-by: Stefan Roese <sr@denx.de>
Acked-by: Gerald Van Baren <vanbaren@cideas.com>
Acked-by: Wolfgang Denk <wd@denx.de>
10 years agocpu/ppc4xx/fdt.c: avoid strcpy() to constant string
Wolfgang Denk [Tue, 20 Oct 2009 21:12:13 +0000 (23:12 +0200)]
cpu/ppc4xx/fdt.c: avoid strcpy() to constant string

strcpy() was iused with the target address being a pointer to a
constant string, which potentially is read-only. Use a (writable)
array of characters instead.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Signed-off-by: Stefan Roese <sr@denx.de>
10 years agocpu/ppc4xx/fdt.c: avoid strcpy() to constant string
Wolfgang Denk [Tue, 20 Oct 2009 21:07:04 +0000 (23:07 +0200)]
cpu/ppc4xx/fdt.c: avoid strcpy() to constant string

strcpy() was iused with the target address being a pointer to a
constant string, which potentially is read-only. Use a (writable)
array of characters instead.

Signed-off-by: Wolfgang Denk <wd@denx.de>
10 years agosmc911x: add support for LAN9220
Daniel Mack [Wed, 8 Apr 2009 11:23:38 +0000 (13:23 +0200)]
smc911x: add support for LAN9220

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
10 years agoenvcrc: check return value of fwrite()
Mike Frysinger [Mon, 19 Oct 2009 00:43:14 +0000 (20:43 -0400)]
envcrc: check return value of fwrite()

Newer toolchains will often complain about unchecked fwrite():
envcrc.c:117: warning: ignoring return value of `fwrite┬┤, declared
with attribute warn_unused_result

So check the return value to silence the warnings.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
10 years agomcc200: fix build error
Wolfgang Denk [Mon, 19 Oct 2009 07:18:57 +0000 (09:18 +0200)]
mcc200: fix build error

Fix compile error:
include/configs/mcc200.h:401:6: error: #elif with no expression

Signed-off-by: Wolfgang Denk <wd@denx.de>
10 years agoOMAP3: fix warnings when NAND/ONENAND is not used
Nishanth Menon [Tue, 13 Oct 2009 16:47:39 +0000 (12:47 -0400)]
OMAP3: fix warnings when NAND/ONENAND is not used

Fix build warnings by putting specific used variables
under required #ifdefs for removing:
mem.c:227: warning: unused variable 'f_sec'
mem.c:226: warning: unused variable 'f_off'
mem.c:225: warning: unused variable 'size'
mem.c:224: warning: unused variable 'base'
mem.c:222: warning: unused variable 'gpmc_config'

Signed-off-by: Nishanth Menon <nm@ti.com>
10 years agoOMAP3: export enable_gpmc_cs_config to board files
Nishanth Menon [Tue, 13 Oct 2009 16:47:24 +0000 (12:47 -0400)]
OMAP3: export enable_gpmc_cs_config to board files

Export enable_gpmc_cs_config into common header to
prevent warning:

warning: implicit declaration of function 'enable_gpmc_cs_config'

Signed-off-by: Nishanth Menon <nm@ti.com>
10 years agoZoom2 Fix serial gpmc setup
Tom Rix [Mon, 12 Oct 2009 16:07:40 +0000 (12:07 -0400)]
Zoom2 Fix serial gpmc setup

The offset to the chip select is incorrect.

The change 187af954cf7958c24efcf0fd62289bbdb4f1f24e,

omap3: embedd gpmc_cs into gpmc config struct

introduced a problem with the serial gpmc setup.

This patch reverts the chip select to its previous value.

The symptoms of this problem are that the Zoom2
currently hangs.

This was run tested on Zoom2.

Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
10 years agoTI DaVinci Sonata: Add Config option for 64 bit Support
Sandeep Paulraj [Sun, 11 Oct 2009 13:10:27 +0000 (09:10 -0400)]
TI DaVinci Sonata: Add Config option for 64 bit Support

Adding the CONFIG_SYS_64BIT_VSPRINTF fot the DM644x based Sonata
Without this option enabled while performing NAND operations we will get
wrong diagnostic messages.
Example if the MTD NAND driver find a bad block while erasing from
a certain address, it will say bad block skipped at 0x00000000.

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
10 years agoTI DaVinci DVEVM: Add Config option for 64 bit Support
Sandeep Paulraj [Sun, 11 Oct 2009 13:14:58 +0000 (09:14 -0400)]
TI DaVinci DVEVM: Add Config option for 64 bit Support

Adding the CONFIG_SYS_64BIT_VSPRINTF in the DVEVM config.
Without this option enabled while performing NAND operations we will get
wrong diagnostic messages.
Example if the MTD NAND driver find a bad block while erasing from
a certain address, it will say bad block skipped at 0x00000000.

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
10 years agoTI DaVinci DM365: Add Config option for 64 bit Support
Sandeep Paulraj [Sat, 10 Oct 2009 14:19:20 +0000 (10:19 -0400)]
TI DaVinci DM365: Add Config option for 64 bit Support

Adding the CONFIG_SYS_64BIT_VSPRINTF in the DM365 EVM config.
Without this option enabled while performing NAND operations we will get
wrong diagnostic messages.
Example if the MTD NAND driver find a bad block while erasing from
a certain address, it will say bad block skipped at 0x00000000.

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
10 years agoTI DaVinci DM355: Add Config option for 64 bit Support
Sandeep Paulraj [Sat, 10 Oct 2009 14:18:46 +0000 (10:18 -0400)]
TI DaVinci DM355: Add Config option for 64 bit Support

Adding the CONFIG_SYS_64BIT_VSPRINTF in the DM355 EVM config.
Without this option enabled while performing NAND operations we will get
wrong diagnostic messages.
Example if the MTD NAND driver find a bad block while erasing from
a certain address, it will say bad block skipped at 0x00000000.

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
10 years agoTI: OMAP3: Remove SZ_xx references
Sandeep Paulraj [Wed, 9 Sep 2009 15:50:40 +0000 (11:50 -0400)]
TI: OMAP3: Remove SZ_xx references

This patch removes dependency on the sizes.h header file
and removes all references to SZ_xx.

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
10 years agoOMAP3: Update Overo and Beagle environment
Steve Sakoman [Sat, 10 Oct 2009 18:29:37 +0000 (14:29 -0400)]
OMAP3: Update Overo and Beagle environment

Update default environment to support new kernel DSS2 subsystem and
simplify rootfs type and location changes.

Signed-off-by: Steve Sakoman <sakoman@gmail.com>
Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
10 years agoTI DaVinci: Maintainer for DM355 and DM365 EVM
Sandeep Paulraj [Sat, 10 Oct 2009 17:46:26 +0000 (13:46 -0400)]
TI DaVinci: Maintainer for DM355 and DM365 EVM

Adding entries to the MAINTAINERS directory for the
DM355 and DM365 EVM.

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
10 years agoTI: DaVinci: DM355 Leopard board support
Sandeep Paulraj [Sat, 10 Oct 2009 17:37:10 +0000 (13:37 -0400)]
TI: DaVinci: DM355 Leopard board support

This patch adds support for the leopard board which is
based on the DM355 SOC.

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
10 years agoTI DaVinci DM646x: Adding initial support for DM6467 EVM
Sandeep Paulraj [Sat, 10 Oct 2009 16:00:47 +0000 (12:00 -0400)]
TI DaVinci DM646x: Adding initial support for DM6467 EVM

This patch adds the initial support for DM6467 EVM.
Other features like NET and NAND support will be added as follow up patches.

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
10 years agoTI DaVinci DM365: Fix Compilation warning for DM365 EVM
Sandeep Paulraj [Fri, 2 Oct 2009 00:22:09 +0000 (20:22 -0400)]
TI DaVinci DM365: Fix Compilation warning for DM365 EVM

This patch fixes a compilation warning while compiling
the DM365 EVM.

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
10 years agoTI DaVinci DM355: Fix Compilation warning for DM355 EVM
Sandeep Paulraj [Fri, 2 Oct 2009 00:21:13 +0000 (20:21 -0400)]
TI DaVinci DM355: Fix Compilation warning for DM355 EVM

This patch fixes a compilation warning while compiling
the DM355 EVM.

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
10 years agoAT91 CPUAT91 Fix compiler warning
Eric Benard [Mon, 12 Oct 2009 08:15:39 +0000 (10:15 +0200)]
AT91 CPUAT91 Fix compiler warning

This change fixes the compiler warning

main.c: In function 'abortboot':
main.c:122: warning: too few arguments for format

Signed-off-by: Eric Benard <eric@eukrea.com>
Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
10 years agoAT91 CPU9260 CPU9G20 Fix compile warnings
Eric Benard [Mon, 12 Oct 2009 08:15:40 +0000 (10:15 +0200)]
AT91 CPU9260 CPU9G20 Fix compile warnings

This change fixes the compiler warning

nand_util.c:45:2: warning: #warning Please define CONFIG_SYS_64BIT_VSPRINTF
  for correct output!

Signed-off-by: Eric Benard <eric@eukrea.com>
Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
10 years agoAT91 CPU9260 Fix machine ID when using a CPU9G20.
Eric Benard [Mon, 12 Oct 2009 08:08:20 +0000 (10:08 +0200)]
AT91 CPU9260 Fix machine ID when using a CPU9G20.

Signed-off-by: Eric Benard <eric@eukrea.com>
Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
10 years agolcd: remove '#if 0' 32-bit scroll, now memcpy does it
Alessandro Rubini [Sat, 10 Oct 2009 09:51:26 +0000 (11:51 +0200)]
lcd: remove '#if 0' 32-bit scroll, now memcpy does it

Signed-off-by: Alessandro Rubini <rubini@unipv.it>
Acked-by: Andrea Gallo <andrea.gallo@stericsson.com>
10 years agolib_generic memset: fill one word at a time if possible
Alessandro Rubini [Sat, 10 Oct 2009 09:51:16 +0000 (11:51 +0200)]
lib_generic memset: fill one word at a time if possible

If the destination is aligned, fill ulong values until possible.
Then fill remaining part by byte.

Signed-off-by: Alessandro Rubini <rubini@unipv.it>
Acked-by: Andrea Gallo <andrea.gallo@stericsson.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
10 years agolib_generic memcpy: copy one word at a time if possible
Alessandro Rubini [Sat, 10 Oct 2009 09:51:05 +0000 (11:51 +0200)]
lib_generic memcpy: copy one word at a time if possible

If source and destination are aligned, this copies ulong values
until possible, trailing part is copied by byte. Thanks for the details
to Wolfgang Denk, Mike Frysinger, Peter Tyser, Chris Moore.

Signed-off-by: Alessandro Rubini <rubini@unipv.it>
Acked-by: Andrea Gallo <andrea.gallo@stericsson.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
10 years agosetenv: do console redirection even if previously unset
Alessandro Rubini [Thu, 8 Oct 2009 12:29:14 +0000 (14:29 +0200)]
setenv: do console redirection even if previously unset

If "stdout" is not previously set, doing "setenv stdout lcd" had no
effect, since console redirection only worked if the environment
variable was already set; the second time you run setenv it worked.
Most default environments lack stdin/out/err definitions, so I'm sure
I'm not alone with this problem.

This patch simply moves a block of code out of a conditional, to do
the same work even if the variable was previously unset.

Signed-off-by: Alessandro Rubini <rubini@unipv.it>
Acked-by: Andrea Gallo <andrea.gallo@stericsson.com>
10 years agompc512x: fix System Clock Control constants for USB1 & USB2
Martha Stan [Wed, 7 Oct 2009 08:38:46 +0000 (04:38 -0400)]
mpc512x: fix System Clock Control constants for USB1 & USB2

Signer-off-by: Martha Stan <mmarx@silicontkx.com>
10 years agomem_mtest: fix error reporting, allow escape with ^C
Paul Gortmaker [Fri, 2 Oct 2009 22:18:33 +0000 (18:18 -0400)]
mem_mtest: fix error reporting, allow escape with ^C

The basic memtest function tries to watch for ^C after each
pattern pass as an escape mechanism, but if things are horribly
wrong, we'll be stuck in an inner loop flooding the console with
error messages and never check for ^C.  To make matters worse,
if the user waits for all the error messages to complete, we
then incorrectly report the test passed without errors.

Adding a check for ^C after any error is printed will give
the end user an escape mechanism from a console flood without
slowing down the overall test speed on a slow processor.

Also, the more extensive memtest quit after just a single error,
which is inconsistent with the normal memtest, and not useful if
if you are doing dynamic environmental impact testing, such as
heating/cooling etc.

Both tests now track the error count and report it properly
at test completion.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
10 years agonew default shortcut to config & build a board
Mike Frysinger [Thu, 1 Oct 2009 16:11:54 +0000 (12:11 -0400)]
new default shortcut to config & build a board

The majority of the time that I build things in U-Boot, I want to just
build for the board.  I don't make board config tweaks after selecting the
board.  So add a new pattern rule that allows people to combine two steps
in one go:
`make foo_config && make` => `make foo`

This shouldn't conflict with any existing make rules as the pattern rule
is used only the rule doesn't already exist.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
10 years agoenv: only build env_embedded and envcrc when needed
Mike Frysinger [Wed, 30 Sep 2009 19:29:58 +0000 (15:29 -0400)]
env: only build env_embedded and envcrc when needed

The env code is protected by the ENV_IS_EMBEDDED define, so attempting to
compile the code when this isn't defined is pointless.  Now that the env
headers have unified around CONFIG_ENV_IS_EMBEDDED, convert the build
system to only build the env objects when this is enabled.  And now that
the env code is conditionally compiled, we can drop the source code checks.

For people who want to extract the environment manually, add a new option
CONFIG_BUILD_ENVCRC that only enables the envcrc utility.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
10 years agopart_dos: check status flags of partitions
Daniel Mack [Mon, 28 Sep 2009 09:40:38 +0000 (11:40 +0200)]
part_dos: check status flags of partitions

Only read partitions which have 0x00 or 0x80 set in their status field.
All others are invalid.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
10 years agogalaxy5200: change cs1 configuration
Eric Millbrandt [Fri, 25 Sep 2009 22:47:43 +0000 (17:47 -0500)]
galaxy5200: change cs1 configuration

Correct the chip select configuration for the nand flash chip select.

Signed-off-by: Eric Millbrandt <emillbrandt@dekaresearch.com>
10 years agoCleanup: use constant
Niklaus Giger [Wed, 23 Sep 2009 06:12:14 +0000 (08:12 +0200)]
Cleanup: use constant

Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
10 years agompc83xx: mpc8313 - handle erratum IPIC1 (TSEC IRQ number swappage)
Kim Phillips [Mon, 12 Oct 2009 16:06:19 +0000 (11:06 -0500)]
mpc83xx: mpc8313 - handle erratum IPIC1 (TSEC IRQ number swappage)

mpc8313e erratum IPIC1 swapped TSEC interrupt ID numbers on rev. 1
h/w (see AN3545).  The base device tree in use has rev. 1 ID numbers,
so if on Rev. 2 (and higher) h/w, we fix them up here.

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Reviewed-by: Roland Lezuo <roland.lezuo@chello.at>
10 years agompc85xx: Fix booting on various boards
Anton Vorontsov [Mon, 12 Oct 2009 19:55:39 +0000 (23:55 +0400)]
mpc85xx: Fix booting on various boards

commit 0e870980a64584a591af775bb9c9fe9450124df9 ("8xxx: Removed
CONFIG_NUM_CPUS from 85xx/86xx") breaks U-Boot on various boards,
namely the ones that call get_sys_info() from board_early_init_f().

get_sys_info() calls cpu_numcores(), which depends on probecpu()
being called before. But probecpu() is called after board_early_init_f(),
and so cpu_numcores() returns random values, which in turn crashes
get_sys_info().

To fix the issue we place probecpu() before board_early_init_f()
in an initialization sequence.

Booting on the following boards should be revived now:
 mpc8540ads
 mpc8541cds
 mpc8548cds
 mpc8555cds
 mpc8560ads
 mpc8568mds
 mpc8569mds
 and maybe more.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
10 years agompc86xx: delete unused MPC86xx_DDR_SDRAM_CLK_CNTL define
Paul Gortmaker [Fri, 2 Oct 2009 22:48:07 +0000 (18:48 -0400)]
mpc86xx: delete unused MPC86xx_DDR_SDRAM_CLK_CNTL define

This is an orphaned legacy leftover that is just polluting
the config file namespace.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
10 years agoppc/P1_P2_RDB: On-chip BootROM support
Dipen Dudhat [Thu, 8 Oct 2009 08:03:29 +0000 (13:33 +0530)]
ppc/P1_P2_RDB: On-chip BootROM support

On Chip BootROM support for P1 and P2 series RDB platforms.

This patch is derived from latest On Chip BootROM support on MPC8536DS

Signed-off-by: Dipen Dudhat <dipen.dudhat@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
10 years agoppc/P1_P2_RDB: NAND Boot Support
Dipen Dudhat [Thu, 8 Oct 2009 08:03:18 +0000 (13:33 +0530)]
ppc/P1_P2_RDB: NAND Boot Support

NAND Boot support for P1 and P2 series RDB platforms.

This patch is derived from NAND Boot support on MPC8536DS.

Signed-off-by: Dipen Dudhat <dipen.dudhat@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
10 years agompc8xxx: improve LAW error messages when setting up DDR
Paul Gortmaker [Wed, 7 Oct 2009 20:34:28 +0000 (16:34 -0400)]
mpc8xxx: improve LAW error messages when setting up DDR

When setting up the LAWs for the DDR, if there was an error,
you got the not-so-helpful error text "ERROR" and nothing
else.  Not only is it non-informative, but it is also
pretty frustrating trying to grep for "ERROR" in the source.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
10 years agosbc8641d: fix LAW so board doesn't hang on DDR init
Paul Gortmaker [Wed, 30 Sep 2009 20:12:31 +0000 (16:12 -0400)]
sbc8641d: fix LAW so board doesn't hang on DDR init

All versions between now and since this commit:

  commit bd76729bcbfd64b5d016a9b936f058931fc06eaf
  MPC86xx: set CONFIG_MAX_MEM_MAPPED to 2G by default

will fail to allow the SBC8641D to get past DDR init, because the
LAW config was overlapping.  Eventually this board will do SPD
EEPROM config, but for now this gets the board working again.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
10 years agoMerge branch 'master' of git://git.denx.de/u-boot-blackfin
Wolfgang Denk [Thu, 15 Oct 2009 20:13:37 +0000 (22:13 +0200)]
Merge branch 'master' of git://git.denx.de/u-boot-blackfin

10 years agoClean-up of s3c24x0 nand driver
kevin.morfitt@fearnside-systems.co.uk [Sat, 10 Oct 2009 04:34:09 +0000 (13:34 +0900)]
Clean-up of s3c24x0 nand driver

This patch re-formats the arm920t s3c24x0 nand driver in preparation for changes
to add support for the Embest SBC2440-II Board.

The changes are as follows:
- re-indent the code using Lindent
- make sure register layouts are defined using a C struct
- replace the upper-case typedef'ed C struct names with lower case
non-typedef'ed ones
- make sure registers are accessed using the proper accessor functions
- run checkpatch.pl and fix any error reports

It assumes the following patch has been applied first:
- [U-Boot][PATCH-ARM] CONFIG_SYS_HZ fix for ARM902T S3C24X0 Boards, 05/09/2009
 - patches 1/4, 2/4 and 3/4 of this series

Tested on an Embest SBC2440-II Board with local u-boot patches as I don't have
any s3c2400 or s3c2410 boards but need this patch applying before I can submit
patches for the SBC2440-II Board. Also, temporarily modified sbc2410x, smdk2400,
smdk2410 and trab configs to use the mtd nand driver (which isn't used by any
board at the moment), ran MAKEALL for all ARM9 targets and no new warnings or
errors were found.

Signed-off-by: Kevin Morfitt <kevin.morfitt@fearnside-systems.co.uk>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
10 years agoClean-up of s3c24x0 drivers excluding nand driver
kevin.morfitt@fearnside-systems.co.uk [Sat, 10 Oct 2009 04:33:11 +0000 (13:33 +0900)]
Clean-up of s3c24x0 drivers excluding nand driver

This patch re-formats the arm920t s3c24x0 driver files, excluding the nand
driver, in preparation for changes to add support for the Embest SBC2440-II Board.

The changes are as follows:
- re-indent the code using Lindent
- make sure register layouts are defined using a C struct
- replace the upper-case typedef'ed C struct names with lower case
  non-typedef'ed ones
- make sure registers are accessed using the proper accessor functions
- run checkpatch.pl and fix any error reports

It assumes the following patch has been applied first:
- [U-Boot][PATCH-ARM] CONFIG_SYS_HZ fix for ARM902T S3C24X0 Boards, 05/09/2009
- patches 1/4 and 2/4 of this series

Tested on an Embest SBC2440-II Board with local u-boot patches as I don't have
any s3c2400 or s3c2410 boards but need this patch applying before I can submit
patches for the SBC2440-II Board. Also, temporarily modified sbc2410x, smdk2400,
smdk2410 and trab configs to use the mtd nand driver (which isn't used by any
board at the moment), ran MAKEALL for all ARM9 targets and no new warnings or
errors were found.

Signed-off-by: Kevin Morfitt <kevin.morfitt@fearnside-systems.co.uk>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
10 years agoClean-up of s3c24x0 header files
kevin.morfitt@fearnside-systems.co.uk [Sat, 10 Oct 2009 04:32:01 +0000 (13:32 +0900)]
Clean-up of s3c24x0 header files

This patch re-formats the arm920t s3c24x0 header files in preparation for
changes to add support for the Embest SBC2440-II Board.

The changes are as follows:
- re-indent the code using Lindent
- make sure register layouts are defined using a C struct
- replace the upper-case typedef'ed C struct names with lower case
non-typedef'ed ones
- make sure registers are accessed using the proper accessor functions
- run checkpatch.pl and fix any error reports

It assumes the following patch has been applied first:
- [U-Boot][PATCH-ARM] CONFIG_SYS_HZ fix for ARM902T S3C24X0 Boards, 05/09/2009
- patch 1/4 of this series

Tested on an Embest SBC2440-II Board with local u-boot patches as I don't have
any s3c2400 or s3c2410 boards but need this patch applying before I can submit
patches for the SBC2440-II Board. Also, temporarily modified sbc2410x, smdk2400,
smdk2410 and trab configs to use the mtd nand driver (which isn't used by any
board at the moment), ran MAKEALL for all ARM9 targets and no new warnings or
errors were found.

Signed-off-by: Kevin Morfitt <kevin.morfitt@fearnside-systems.co.uk>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
10 years agoClean-up of cpu_arm920t and cpu_arm920t_s3c24x0 code
kevin.morfitt@fearnside-systems.co.uk [Sat, 10 Oct 2009 04:30:22 +0000 (13:30 +0900)]
Clean-up of cpu_arm920t and cpu_arm920t_s3c24x0 code

This patch re-formats the code in cpu/arm920t and cpu/arm920t/23c24x0 in
preparation for changes to add support for the Embest SBC2440-II Board.

The changes are as follows:
- re-indent the code using Lindent
- make sure register layouts are defined using a C struct
- replace the upper-case typedef'ed C struct names with lower case
  non-typedef'ed ones
- make sure registers are accessed using the proper accessor functions
- run checkpatch.pl and fix any error reports

It assumes the following patch has been applied first:
- [U-Boot][PATCH-ARM] CONFIG_SYS_HZ fix for ARM902T S3C24X0 Boards, 05/09/2009

Tested on an Embest SBC2440-II Board with local u-boot patches as I don't have
any s3c2400 or s3c2410 boards but need this patch applying before I can submit
patches for the SBC2440-II Board. Also, ran MAKEALL for all ARM9 targets and no
new warnings or errors were found.

Signed-off-by: Kevin Morfitt <kevin.morfitt@fearnside-systems.co.uk>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
10 years agoCONFIG_SYS_HZ fix for ARM902T S3C24X0 Boards
kevin.morfitt@fearnside-systems.co.uk [Sat, 5 Sep 2009 15:33:13 +0000 (00:33 +0900)]
CONFIG_SYS_HZ fix for ARM902T S3C24X0 Boards

This sets CONFIG_SYS_HZ to 1000 for all boards that use the s3c2400 and
s3c2410 cpu's which fixes various problems such as the timeouts in tftp being
too short.

Tested on an Embest SBC2440-II Board with local u-boot patches as I don't
have any s3c2400 or s3c2410 boards but need this patch applying before I can
submit patches for the SBC2440-II Board. Also, ran MAKEALL for all ARM9 targets
and no new warnings or errors were found.

It was originally submitted on 21/06/2009 but didn't get into the 2009.08
release, and Jean-Pierre made one comment on the original patch (see
http://lists.denx.de/pipermail/u-boot/2009-July/055470.html). I've made two
changes to the original patch:
- it's been re-based to the current release
- I've re-named get_timer_raw() to get_ticks() in response to Jean-Pierre's comment

This affects the sbc2410, smdk2400, smdk2410 and trab boards. I've copied it
directly to the maintainers of all except the sbc2410 which doesn't have an
entry in MAINTAINERS.

Signed-off-by: Kevin Morfitt <kmorfitt@aselaptop-1.localdomain>
Tested-by: Wolfgang Denk <wd@denx.de>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
10 years agos5pc1xx: add support SMDKC100 board
Minkyu Kang [Thu, 1 Oct 2009 08:20:40 +0000 (17:20 +0900)]
s5pc1xx: add support SMDKC100 board

Adds new board SMDKC100 that uses s5pc100 SoC

Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Signed-off-by: HeungJun, Kim <riverful.kim@samsung.com>
10 years agos5pc1xx: support serial driver
Minkyu Kang [Thu, 1 Oct 2009 08:20:28 +0000 (17:20 +0900)]
s5pc1xx: support serial driver

This patch includes the serial driver for s5pc1xx.
s5pc1xx uart driver needs own register setting and clock configuration.
So, need to special driver.

Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
10 years agos5pc1xx: support onenand driver
Minkyu Kang [Thu, 1 Oct 2009 08:20:08 +0000 (17:20 +0900)]
s5pc1xx: support onenand driver

This patch includes the onenand driver for s5pc100

Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
10 years agos5pc1xx: support Samsung s5pc1xx SoC
Minkyu Kang [Thu, 1 Oct 2009 08:20:01 +0000 (17:20 +0900)]
s5pc1xx: support Samsung s5pc1xx SoC

This patch adds support for the Samsung s5pc100 and s5pc110
SoCs. The s5pc1xx SoC is an ARM Cortex A8 processor.

Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Signed-off-by: HeungJun, Kim <riverful.kim@samsung.com>