karo-tx-uboot.git
8 years agoPrepare v2011.09 v2011.09
Wolfgang Denk [Thu, 29 Sep 2011 19:11:15 +0000 (21:11 +0200)]
Prepare v2011.09

Signed-off-by: Wolfgang Denk <wd@denx.de>
8 years agoARM: versatile: delete split_by_variant.sh
Linus Walleij [Sun, 11 Sep 2011 23:25:22 +0000 (01:25 +0200)]
ARM: versatile: delete split_by_variant.sh

Since commit d388298a59ba375c76597b8f95b560afa971a0fb by
Stefano Babic this file is no longer needed so delete it.

Cc: Stefano Babic <sbabic@denx.de>
Cc: Loïc Minier <loic.minier@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
8 years agoRevert "phylib: remove a couple of redundant code lines"
Wolfgang Denk [Wed, 28 Sep 2011 19:02:43 +0000 (21:02 +0200)]
Revert "phylib: remove a couple of redundant code lines"

This reverts commit 041c542219af7f31c372d89b4c7c6f4c8064a8ce.

The lines removed by this commit weren't redundant. The logic is (and
probably should be better commented):

Find the intersection of the advertised capabilities of both sides of
the link (lpa).
From that intersection, find the highest capability we can run at
(that will be the negotiated link).

Now imagine that the intersection (lpa) is (LPA_100HALF | LPA_10FULL).

The code will now set phydev->speed to 100, and phydev->duplex to 1,
but this link does not support 100FULL.

Kudos to Andy Fleming <afleming@gmail.com> for binging this to
attention and for the explanation.

Signed-off-by: Wolfgang Denk <wd@denx.de>
8 years agodoc/README.scrapyard: Update board removal commit IDs
Wolfgang Denk [Wed, 28 Sep 2011 18:42:00 +0000 (20:42 +0200)]
doc/README.scrapyard: Update board removal commit IDs

Signed-off-by: Wolfgang Denk <wd@denx.de>
8 years agoMerge branch 'master' of git://git.denx.de/u-boot-arm
Wolfgang Denk [Wed, 28 Sep 2011 18:38:21 +0000 (20:38 +0200)]
Merge branch 'master' of git://git.denx.de/u-boot-arm

* 'master' of git://git.denx.de/u-boot-arm:
  ARM: remove broken "ixdp425" and "ixpdg425" boards

8 years agoARM: remove broken "ixdp425" and "ixpdg425" boards
Albert ARIBAUD [Thu, 22 Sep 2011 21:55:19 +0000 (21:55 +0000)]
ARM: remove broken "ixdp425" and "ixpdg425" boards

Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
Acked-by: Stefan Roese <sr@denx.de>
8 years agoASIX: Fix buffer access in asix_get_phy_addr()
Marek Vasut [Fri, 23 Sep 2011 19:13:35 +0000 (21:13 +0200)]
ASIX: Fix buffer access in asix_get_phy_addr()

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
8 years agoMerge branch 'master' of git://git.denx.de/u-boot-arm
Wolfgang Denk [Fri, 23 Sep 2011 06:23:25 +0000 (08:23 +0200)]
Merge branch 'master' of git://git.denx.de/u-boot-arm

* 'master' of git://git.denx.de/u-boot-arm:
  OMAP3: beagle: Fix build warning in beagle.c

8 years agodoc: provide a correct board_init_r definition path
Vladimir Zapolskiy [Mon, 5 Sep 2011 07:25:04 +0000 (07:25 +0000)]
doc: provide a correct board_init_r definition path

This is a trivial fix in the documentation, which corrects
board_init_r() source reference.

Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
8 years agoOMAP3: beagle: Fix build warning in beagle.c
Dirk Behme [Thu, 22 Sep 2011 01:53:22 +0000 (01:53 +0000)]
OMAP3: beagle: Fix build warning in beagle.c

Fix build warning

beagle.c:532: warning: initialization from incompatible pointer type

Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
CC: Jason Kridner <jkridner@beagleboard.org>
CC: Koen Kooi <koen@dominion.thruhere.net>
CC: Joel A Fernandes <agnel.joel@gmail.com>
Cc: Greg Turner <gregturner@ti.com>
CC: Sandeep Paulraj <s-paulraj@ti.com>
Acked-by: Jason Kridner <jkridner@beagleboard.org>
8 years agoPrepare v2011.09-rc2 v2011.09-rc2
Wolfgang Denk [Thu, 22 Sep 2011 19:58:05 +0000 (21:58 +0200)]
Prepare v2011.09-rc2

Signed-off-by: Wolfgang Denk <wd@denx.de>
8 years agoMinor Coding Style Cleanup
Wolfgang Denk [Thu, 22 Sep 2011 19:56:54 +0000 (21:56 +0200)]
Minor Coding Style Cleanup

Signed-off-by: Wolfgang Denk <wd@denx.de>
8 years agokm/common: fix bug in IVM mac address access
Holger Brunck [Tue, 20 Sep 2011 05:05:55 +0000 (05:05 +0000)]
km/common: fix bug in IVM mac address access

The MAC address stored in the inventory eeprom begins at offset 1.

Signed-off-by: Holger Brunck <holger.brunck@keymile.com>
Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com>
cc: Wolfgang Denk <wd@denx.de>

8 years agosf: fix debug format string warning
Vadim Bendebury [Sun, 11 Sep 2011 18:54:48 +0000 (18:54 +0000)]
sf: fix debug format string warning

On some systems, we get a warning when %lu is used with size_t's, so
use the correct format string.

Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
8 years agonet: turn name len check into an assert
Mike Frysinger [Sun, 11 Sep 2011 18:49:53 +0000 (18:49 +0000)]
net: turn name len check into an assert

The new sanity check introduces a printf warning for some systems:
eth.c:233: warning: format '%zu' expects type 'size_t', but argument 3 has type 'int'

Rather than tweak the format string, use the new assert() helper instead.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
8 years agoignore soc asm-offsets.s
Mike Frysinger [Sun, 11 Sep 2011 18:47:24 +0000 (18:47 +0000)]
ignore soc asm-offsets.s

Recent commit a4814a69d3bca6ee05f4bfc4 cleaned up generation of
asm-offsets.s for SoC dirs, but missed adding it to the ignore
list which makes it show up in `git status`.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
8 years agoDrop bogus BOOTFLAG_* definitions
Wolfgang Denk [Tue, 20 Sep 2011 11:18:07 +0000 (13:18 +0200)]
Drop bogus BOOTFLAG_* definitions

There is no code anywhere that references BOOTFLAG_* so remove these
defines.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Heiko Schocher <hs@denx.de>
Cc: Valentin Longchamp <valentin.longchamp@keymile.com>
Cc: Peter Tyser <ptyser@xes-inc.com>
8 years agonet/bootp.c: fix tftp load if autoload environment var isn't set
Peter Korsgaard [Sun, 18 Sep 2011 21:54:46 +0000 (21:54 +0000)]
net/bootp.c: fix tftp load if autoload environment var isn't set

Commit 093498669 (Put common autoload code into auto_load() function)
broke handling of autoload environment variable not being set.
The bootp/dhcp code will just keep on requesting IP address forever
and never start TFTP download.

Fix it by moving TftpStart() outside the conditional like it was before.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Tested-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Simon Glass <sjg@chromium.org>
8 years agoppc4xx: Flush dcache after DDR2 autocalibration with caches on
Stefan Roese [Fri, 16 Sep 2011 10:54:58 +0000 (12:54 +0200)]
ppc4xx: Flush dcache after DDR2 autocalibration with caches on

Flush the dcache before removing the TLB with caches enabled.
Otherwise this might lead to problems later on, e.g. while booting
Linux (as seen on ICON-440SPe).

Signed-off-by: Stefan Roese <sr@denx.de>
8 years agoFix incorrect array size of phy settings for 405EX
Weirich, Bernhard [Thu, 8 Sep 2011 16:27:38 +0000 (18:27 +0200)]
Fix incorrect array size of phy settings for 405EX

Change bd_t->bi_phy* arrays from 1 to 2 for PPC405EX since
405EX has 2 ethernet interfaces.

Signed-off-by: Bernhard Weirich <bernhard.weirich@riedel.net>
Signed-off-by: Stefan Roese <sr@denx.de>
8 years agoDA830: Fix Build Warning
Sandeep Paulraj [Tue, 13 Sep 2011 09:56:56 +0000 (09:56 +0000)]
DA830: Fix Build Warning

This commit fixes a build warning in the DA830 EVM build

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
8 years agoled: remove camel casing of led identifiers globally
Jason Kridner [Sun, 4 Sep 2011 18:40:16 +0000 (14:40 -0400)]
led: remove camel casing of led identifiers globally

Result of running the following command to address Wolfgang's
comment about camel case:

for file in `find . | grep '\.[chS]$'`; do perl -i -pe
's/(green|yellow|red|blue)_LED_(on|off)/$1_led_$2/g' $file; done

Discussion:
http://patchwork.ozlabs.org/patch/84988/

Signed-off-by: Jason Kridner <jkridner@beagleboard.org>
Signed-off-by: Joel A Fernandes <agnel.joel@gmail.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
8 years agoomap4: fix pad configuration settings for SDP and Panda
Aneesh V [Thu, 8 Sep 2011 15:06:06 +0000 (11:06 -0400)]
omap4: fix pad configuration settings for SDP and Panda

omap4: fix pad configuration settings for SDP and Panda

Signed-off-by: Aneesh V <aneesh@ti.com>
Signed-off-by: Sebastien Jan <s-jan@ti.com>
Signed-off-by: David Anders <x0132446@ti.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
8 years agoomap4: IO settings
Aneesh V [Thu, 8 Sep 2011 15:05:56 +0000 (11:05 -0400)]
omap4: IO settings

Tuning some IO settings for better performance and power.
And consolidate all such IO settings at one place.

Signed-off-by: Aneesh V <aneesh@ti.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
8 years agoomap4: make SDRAM init work for ES1.0 silicon
Aneesh V [Thu, 8 Sep 2011 15:05:53 +0000 (11:05 -0400)]
omap4: make SDRAM init work for ES1.0 silicon

SDRAM init was not working on ES1.0 due to a programming
error. A pointer that was passed by value to a function
was set in function emif_get_device_details(), but the effect
wouldn't be seen in the calling function. The issue came
out while testing for ES1.0 because ES1.0 doesn't have any
SDRAM chips connected to CS1

Signed-off-by: Aneesh V <aneesh@ti.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
8 years agoomap4: factor out common part from board config headers
Aneesh V [Thu, 8 Sep 2011 15:05:49 +0000 (11:05 -0400)]
omap4: factor out common part from board config headers

Factor out common parts from omap4_sdp4430.h and omap4_panda.h
into a new file omap4_common.h

Signed-off-by: Aneesh V <aneesh@ti.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
8 years agoomap: gpio: Adapt board files to use generic API
Sanjeev Premi [Thu, 8 Sep 2011 14:51:01 +0000 (10:51 -0400)]
omap: gpio: Adapt board files to use generic API

This patch contains updates the sources in the board files
to use the generic API.

Signed-off-by: Sanjeev Premi <premi@ti.com>
8 years agoomap: gpio: generic changes after changing API
Sanjeev Premi [Thu, 8 Sep 2011 14:48:39 +0000 (10:48 -0400)]
omap: gpio: generic changes after changing API

This patch contains the generic changes required after
change to generic API in the previous patch.

Signed-off-by: Sanjeev Premi <premi@ti.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
8 years agoomap: gpio: Use generic API
Sanjeev Premi [Thu, 8 Sep 2011 14:47:25 +0000 (10:47 -0400)]
omap: gpio: Use generic API

Convert all OMAP specific functions to use the common API
definitions in include/asm/gpio.h. In the process, made
few additional changes:
 - Use -EINVAL consistently. -1 was used in many places.
 - Removed one-liner static functions that were used only
   once. Replaced the content as necessary.
 - Combines implementation of functions omap_get_gpio_dataout()
   and omap_get_gpio_datain(). To do so, new static function
   _get_gpio_direction() was added.

Signed-off-by: Sanjeev Premi <premi@ti.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
8 years agoOMAP3 Beagle: Minor config cleanup
Sandeep Paulraj [Mon, 5 Sep 2011 15:25:20 +0000 (11:25 -0400)]
OMAP3 Beagle: Minor config cleanup

This patch removes a hardcoded MAC address

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
8 years agoda830: modify the MEMTEST start and end address
Nagabhushana Netagunte [Sun, 4 Sep 2011 19:08:47 +0000 (15:08 -0400)]
da830: modify the MEMTEST start and end address

Modify the MEMTEST start and end address. The memtest range was overlapping the
CONFIG_SYS_LOAD_ADDR which causes the uImage to be corrupt.Also, modify the
size for which mtest is run to 32MB from 16MB.

Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
Signed-off-by: Nagabhushana Netagunte <nagabhushana.netagunte@ti.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
8 years agoda830: enable SPI flash boot mode
Nagabhushana Netagunte [Sun, 4 Sep 2011 19:05:38 +0000 (15:05 -0400)]
da830: enable SPI flash boot mode

Enable SPI flash boot mode in configuration file as default.
With the introduction of 456MHz part, SPI operating frequency
will increase and at this frequency SPI does not work correctly.
Hence reduce the default SPI speed to 30MHz from 50MHz.

Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
Signed-off-by: Nagabhushana Netagunte <nagabhushana.netagunte@ti.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
8 years agoda830: modify the U-Boot prompt string
Nagabhushana Netagunte [Sun, 4 Sep 2011 18:59:01 +0000 (14:59 -0400)]
da830: modify the U-Boot prompt string

Modify U-boot promt string from 'DA830-evm >' to 'U-Boot >' as
there are many variants of da830 based boards which have diffrent
names such as L137, AM1707 etc.

Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
Signed-off-by: Nagabhushana Netagunte <nagabhushana.netagunte@ti.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
8 years agoARMV7: OMAP3: Add 37xx ESx revision numbers.
Howard D. Gray [Sun, 4 Sep 2011 18:11:17 +0000 (14:11 -0400)]
ARMV7: OMAP3: Add 37xx ESx revision numbers.

OMAP3: Add 37xx ESx revision numbers.

Signed-off-by: Michael Jones <michael.jones@matrix-vision.de>
Signed-off-by: Howard D. Gray <howard.gray@matrix-vision.de>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
8 years agoARMV7: OMAP: I2C driver: cosmetic: make checkpatch-compatible
Michael Jones [Wed, 27 Jul 2011 18:01:55 +0000 (14:01 -0400)]
ARMV7: OMAP: I2C driver: cosmetic: make checkpatch-compatible

Signed-off-by: Michael Jones <michael.jones@matrix-vision.de>
Acked-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
8 years agoARMV7: OMAP: Write more than 1 byte at a time in i2c_write
Michael Jones [Sun, 4 Sep 2011 18:01:55 +0000 (14:01 -0400)]
ARMV7: OMAP: Write more than 1 byte at a time in i2c_write

This allows the EEPROM layer to send a single i2c write command
per page, and wait CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS between
i2c write commands.

Signed-off-by: Michael Jones <michael.jones@matrix-vision.de>
Acked-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
8 years agoOMAP: Add function to get state of a GPIO output
Joel A Fernandes [Sun, 4 Sep 2011 16:10:03 +0000 (11:10 -0500)]
OMAP: Add function to get state of a GPIO output

Read directly from OMAP_GPIO_DATAOUT to get the output state of the GPIO pin

Signed-off-by: Joel A Fernandes <agnel.joel@gmail.com>
Signed-off-by: Jason Kridner <jkridner@beagleboard.org>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
8 years agoMX25: tx25: Cleanup tx25.h config
Fabio Estevam [Tue, 30 Aug 2011 05:44:15 +0000 (05:44 +0000)]
MX25: tx25: Cleanup tx25.h config

Cleanup tx25.h by removing unnecessary defines and by removing unneeded "1"'s.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
8 years agoMX25: tx25: Fix build by making use of GPIO framework
Fabio Estevam [Mon, 29 Aug 2011 04:27:06 +0000 (04:27 +0000)]
MX25: tx25: Fix build by making use of GPIO framework

Make use of GPIO framework and avoid the following build error:

tx25.c: In function 'tx25_fec_init':
tx25.c:73: error: dereferencing pointer to incomplete type
tx25.c:74: error: dereferencing pointer to incomplete type
tx25.c:75: error: dereferencing pointer to incomplete type
tx25.c:76: error: dereferencing pointer to incomplete type
tx25.c:83: error: dereferencing pointer to incomplete type
tx25.c:84: error: dereferencing pointer to incomplete type
tx25.c:114: error: dereferencing pointer to incomplete type
tx25.c:115: error: dereferencing pointer to incomplete type
tx25.c:116: error: dereferencing pointer to incomplete type
tx25.c:117: error: dereferencing pointer to incomplete type
tx25.c:124: error: dereferencing pointer to incomplete type
tx25.c:125: error: dereferencing pointer to incomplete type
tx25.c:126: error: dereferencing pointer to incomplete type

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Stefano Babic <sbabic@denx.de>
8 years agoomap3: beagle: Fix build warning
Sanjeev Premi [Mon, 5 Sep 2011 00:25:53 +0000 (00:25 +0000)]
omap3: beagle: Fix build warning

This patch fixes the warning dure to recent changes to the board
configuration:
cmd_i2c.o cmd_i2c.c -c
cmd_i2c.c:109:1: warning: missing braces around initializer
cmd_i2c.c:109:1: warning: (near initialization for 'i2c_no_probes[0]')

Signed-off-by: Sanjeev Premi <premi@ti.com>
Cc: Jason Kridner <jkridner@beagleboard.org>
Acked-by: Jason Kridner <jdk@ti.com>
8 years agoPrepare v2011.09 v2011.09-rc1
Wolfgang Denk [Sun, 11 Sep 2011 19:31:04 +0000 (21:31 +0200)]
Prepare v2011.09

Signed-off-by: Wolfgang Denk <wd@denx.de>
8 years agoMinor coding style cleanup.
Wolfgang Denk [Sun, 11 Sep 2011 19:24:09 +0000 (21:24 +0200)]
Minor coding style cleanup.

Signed-off-by: Wolfgang Denk <wd@denx.de>
8 years agoARM: hawkboard: fix compilation of nand_spl
Wolfgang Denk [Sat, 10 Sep 2011 20:26:28 +0000 (22:26 +0200)]
ARM: hawkboard: fix compilation of nand_spl

Fix build problem:

nand_spl/board/davinci/da8xxevm/hawkboard_nand_spl.c: In function 'board_init_f':
nand_spl/board/davinci/da8xxevm/hawkboard_nand_spl.c:132: warning: implicit declaration of function 'nand_boot'
nand_spl/board/davinci/da8xxevm/hawkboard_nand_spl.c:133: warning: 'noreturn' function does return

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Syed Mohammed Khasim <sm.khasim@gmail.com>
Cc: Sughosh Ganu <urwithsughosh@gmail.com>
Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
8 years agocm4008, cm41xx: fix build warnings
Wolfgang Denk [Sat, 10 Sep 2011 14:59:02 +0000 (16:59 +0200)]
cm4008, cm41xx: fix build warnings

Fix these:
cm4008.c: In function 'board_eth_init':
cm4008.c:79: warning: implicit declaration of function 'ks8695_eth_initialize'

cm41xx.c: In function 'board_eth_init':
cm41xx.c:79: warning: implicit declaration of function 'ks8695_eth_initialize'

While we are at it, sort include list in netdev.h

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Greg Ungerer <greg.ungerer@opengear.com>
8 years agotegra2: fix warning: "assert" redefined
Wolfgang Denk [Sat, 10 Sep 2011 14:17:25 +0000 (16:17 +0200)]
tegra2: fix warning: "assert" redefined

Commit 21726a7 "Add assert() for debug assertions" caused build
warnings for all tegra2 based boards:

clock.c:36:1: warning: "assert" redefined
In file included from clock.c:29:
include/common.h:144:1: warning: this is the location of the previous definition

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Simon Glass <sjg@chromium.org>
8 years agoARM: hawkboard_nand: fix compilation of nand_spl
Stefano Babic [Fri, 9 Sep 2011 03:09:02 +0000 (03:09 +0000)]
ARM: hawkboard_nand: fix compilation of nand_spl

get_ram_size() is called, but memsize.c is not compiled.

Signed-off-by: Stefano Babic <sbabic@denx.de>
8 years agoKS8695: convert KS8695 eth driver to CONFIG_MULTI_ETH
Greg Ungerer [Sat, 10 Sep 2011 08:40:34 +0000 (18:40 +1000)]
KS8695: convert KS8695 eth driver to CONFIG_MULTI_ETH

Trivial conversion of the ks8695eth driver to a CONFIG_MULTI_ETH type
driver.

Signed-off-by: Greg Ungerer <greg.ungerer@opengear.com>
8 years agoCM41xx: fix signedness of env bootargs string pointer
Greg Ungerer [Sat, 10 Sep 2011 08:37:21 +0000 (18:37 +1000)]
CM41xx: fix signedness of env bootargs string pointer

The pointer to the flash based bootargs should be a "char *", not unsigned.
Fixes:

cm41xx.c: In function ‘env_flash_cmdline’:
cm41xx.c:67: warning: pointer targets in passing argument 2 of ‘setenv’ differ in signedness

Signed-off-by: Greg Ungerer <greg.ungerer@opengear.com>
8 years agoCM4008: fix signedness of env bootargs string pointer
Greg Ungerer [Sat, 10 Sep 2011 08:36:40 +0000 (18:36 +1000)]
CM4008: fix signedness of env bootargs string pointer

The pointer to the flash based bootargs should be a "char *", not unsigned.
Fixes:

cm4008.c: In function ‘env_flash_cmdline’:
cm4008.c:67: warning: pointer targets in passing argument 2 of ‘setenv’ differ in signedness

Signed-off-by: Greg Ungerer <greg.ungerer@opengear.com>
8 years agoutx8245: fix build breakage due to assert()
Wolfgang Denk [Sat, 10 Sep 2011 14:04:12 +0000 (16:04 +0200)]
utx8245: fix build breakage due to assert()

Commit 21726a7 "Add assert() for debug assertions" broke building the
utx8245 board:

dlmalloc.c: In function 'do_check_chunk':
dlmalloc.c:1660: error: 'sz' undeclared (first use in this function)
dlmalloc.c:1660: error: (Each undeclared identifier is reported only once
dlmalloc.c:1660: error: for each function it appears in.)
dlmalloc.c: In function 'do_check_free_chunk':
dlmalloc.c:1689: error: 'next' undeclared (first use in this function)
dlmalloc.c: In function 'do_check_malloced_chunk':
dlmalloc.c:1748: error: 'sz' undeclared (first use in this function)
dlmalloc.c:1750: error: 'room' undeclared (first use in this function)

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Simon Glass <sjg@chromium.org>
8 years agoUBIFS: fix warning: format '%lX' expects type 'long unsigned int'
Wolfgang Denk [Fri, 9 Sep 2011 22:41:14 +0000 (00:41 +0200)]
UBIFS: fix warning: format '%lX' expects type 'long unsigned int'

Commit 46d7274 "UBIFS: Change ubifsload to set the filesize variable"
introduced the follwing compiler warning:

ubifs.c: In function 'ubifs_load':
ubifs.c:742: warning: format '%lX' expects type 'long unsigned int', but argument 3 has type 'u32'

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Bastian Ruppert <Bastian.Ruppert@Sewerin.de>
8 years agoFix warning: "assert" redefined
Wolfgang Denk [Fri, 9 Sep 2011 22:31:11 +0000 (00:31 +0200)]
Fix warning: "assert" redefined

Commit 21726a7 "Add assert() for debug assertions" caused build
warnings for many systems:

In file included from bedbug.c:6:
/home/wd/git/u-boot/work/include/bedbug/bedbug.h:24:1: warning: "assert" redefined
In file included from bedbug.c:3:
/home/wd/git/u-boot/work/include/common.h:144:1: warning: this is the location of the previous definition
In file included from cmd_bedbug.c:10:
/home/wd/git/u-boot/work/include/bedbug/bedbug.h:24:1: warning: "assert" redefined
In file included from cmd_bedbug.c:5:
/home/wd/git/u-boot/work/include/common.h:144:1: warning: this is the location of the previous definition

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Acked-by: Simon Glass <sjg@chromium.org>
8 years agoMerge branch 'master' of git://git.denx.de/u-boot-mpc85xx
Wolfgang Denk [Fri, 9 Sep 2011 22:17:42 +0000 (00:17 +0200)]
Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx

* 'master' of git://git.denx.de/u-boot-mpc85xx:
  powerpc/mpc8610hpcd: set pci1_hose.config_table after fsl_setup_hose
  powerpc/mpc8548cds: set pci1_hose.config_table after fsl_setup_hose
  powerpc/mpc8568mds: set pci1_hose.config_table after fsl_setup_hose

8 years agoCM4000: fix broken flash base for OpenGear boards
Greg Ungerer [Fri, 9 Sep 2011 12:23:34 +0000 (22:23 +1000)]
CM4000: fix broken flash base for OpenGear boards

Use _bss_start_ofs as the size of the boot loader code+data that we want
to protect in the flash. This replaces use of the no longer defined
_armboot_start.

Fixes:

flash.c: In function ‘flash_init’:
flash.c:75: error: ‘_bss_start’ undeclared (first use in this function)
flash.c:75: error: (Each undeclared identifier is reported only once
flash.c:75: error: for each function it appears in.)
flash.c:75: error: ‘_armboot_start’ undeclared (first use in this function)

Signed-off-by: <greg.ungerer@opengear.com>
8 years agoCM4000: fix missing RAM definitions for OpenGear boards
Greg Ungerer [Fri, 9 Sep 2011 12:23:18 +0000 (22:23 +1000)]
CM4000: fix missing RAM definitions for OpenGear boards

The OpenGear boards CM4008, CM4116 and CM4148 need their DRAM base
and RAM stack base addresses defined.

Fixes:

board.c: In function ‘__dram_init_banksize’:
board.c:227: error: ‘CONFIG_SYS_SDRAM_BASE’ undeclared (first use in this function)
board.c:227: error: (Each undeclared identifier is reported only once
board.c:227: error: for each function it appears in.)
board.c: In function ‘board_init_f’:
board.c:270: error: ‘CONFIG_SYS_INIT_SP_ADDR’ undeclared (first use in this function)
board.c:303: error: ‘CONFIG_SYS_SDRAM_BASE’ undeclared (first use in this function)

Signed-off-by: Greg Ungerer <greg.ungerer@opengear.com>
8 years agoKS8695: move TIMER_ definitions before code use
Greg Ungerer [Fri, 9 Sep 2011 12:19:10 +0000 (22:19 +1000)]
KS8695: move TIMER_ definitions before code use

Move the TIMER_ definitions before they are used in KS8695 timer.c code.
Fixes:

timer.c: In function ‘timer_init’:
timer.c:37: error: ‘TIMER_COUNT’ undeclared (first use in this function)
timer.c:37: error: (Each undeclared identifier is reported only once
timer.c:37: error: for each function it appears in.)
timer.c:38: error: ‘TIMER_PULSE’ undeclared (first use in this function)

Signed-off-by: Greg Ungerer <greg.ungerer@opengear.com>
8 years agophylib: remove a couple of redundant code lines
Vladimir Zapolskiy [Mon, 5 Sep 2011 07:24:08 +0000 (07:24 +0000)]
phylib: remove a couple of redundant code lines

This change slightly improves readability of the phydev speed/duplex
assignment logic.

Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Acked-by: Detlev Zundel <dzu@denx.de>
8 years agophylib: reset mii bus only if reset handler is registered
Vladimir Zapolskiy [Mon, 5 Sep 2011 07:24:07 +0000 (07:24 +0000)]
phylib: reset mii bus only if reset handler is registered

This change allows to cope with a mii bus device registered using
miiphy_register(), which doesn't assign a default reset handler.

Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Acked-by: Detlev Zundel <dzu@denx.de>
8 years agoUBIFS: Change ubifsload to set the filesize variable
Bastian Ruppert [Mon, 5 Sep 2011 03:03:57 +0000 (03:03 +0000)]
UBIFS: Change ubifsload to set the filesize variable

This is the same behaviour like tftp or fatload command.

Signed-off-by: Bastian Ruppert <Bastian.Ruppert@Sewerin.de>
CC: kmpark@infradead.org
Acked-by: Detlev Zundel <dzu@denx.de>
8 years agoAdd assert() for debug assertions
Simon Glass [Wed, 29 Jun 2011 09:49:34 +0000 (09:49 +0000)]
Add assert() for debug assertions

assert() is like BUG_ON() but compiles to nothing unless DEBUG is defined.
This is useful when a condition is an error but a board reset is unlikely
to fix it, so it is better to soldier on in hope. Assertion failures should
be caught during development/test.

It turns out that assert() is defined separately in a few places in U-Boot
with various meanings. This patch cleans up some of these.

Build errors exposed by this change (and defining DEBUG) are also fixed in
this patch.

Signed-off-by: Simon Glass <sjg@chromium.org>
8 years agoMAKEALL: drop boards listed in boards.cfg
Wolfgang Denk [Thu, 8 Sep 2011 05:01:24 +0000 (05:01 +0000)]
MAKEALL: drop boards listed in boards.cfg

Pick them up automatically using $(boards_by_arch ...)

Signed-off-by: Wolfgang Denk <wd@denx.de>
8 years agoMAKEALL: drop non-existent "versatile" configuration
Wolfgang Denk [Thu, 8 Sep 2011 03:23:28 +0000 (03:23 +0000)]
MAKEALL: drop non-existent "versatile" configuration

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
8 years agoYAFFS2: fs/yaffs2/yaffs_guts.c - fix build warnings
Wolfgang Denk [Thu, 8 Sep 2011 02:10:22 +0000 (02:10 +0000)]
YAFFS2: fs/yaffs2/yaffs_guts.c - fix build warnings

Fix these:
yaffs_guts.c: In function 'yaffs_ReadDataFromFile':
yaffs_guts.c:4622: warning: pointer targets in passing argument 3 of 'yaffs_AddrToChunk' differ in signedness
yaffs_guts.c:4622: warning: pointer targets in passing argument 4 of 'yaffs_AddrToChunk' differ in signedness
yaffs_guts.c: In function 'yaffs_WriteDataToFile':
yaffs_guts.c:4745: warning: pointer targets in passing argument 3 of 'yaffs_AddrToChunk' differ in signedness
yaffs_guts.c:4745: warning: pointer targets in passing argument 4 of 'yaffs_AddrToChunk' differ in signedness
yaffs_guts.c: In function 'yaffs_ResizeFile':
yaffs_guts.c:4968: warning: pointer targets in passing argument 3 of 'yaffs_AddrToChunk' differ in signedness
yaffs_guts.c:4968: warning: pointer targets in passing argument 4 of 'yaffs_AddrToChunk' differ in signedness
yaffs_guts.c: In function 'yaffs_GutsInitialise':
yaffs_guts.c:7235: warning: assignment from incompatible pointer type
yaffs_guts.c: In function 'yaffs_CreateNewObject':
yaffs_guts.c:2143: warning: 'tn' may be used uninitialized in this function
yaffs_guts.c: In function 'yaffs_MknodObject':
yaffs_guts.c:2258: warning: 'str' may be used uninitialized in this function

Signed-off-by: Wolfgang Denk <wd@denx.de>
8 years agoYAFFS2: fs/yaffs2/yaffs_guts.c - fix build warnings
Wolfgang Denk [Thu, 8 Sep 2011 02:10:21 +0000 (02:10 +0000)]
YAFFS2: fs/yaffs2/yaffs_guts.c - fix build warnings

Fix these:
yaffs_guts.c: At top level:
yaffs_guts.c:400: warning: 'yaffs_SkipFullVerification' defined but not used

Testing shows no changes of the image sizes.

Signed-off-by: Wolfgang Denk <wd@denx.de>
8 years agoYAFFS2: fs/yaffs2/yaffs_nand.[hc] - fix build warnings
Wolfgang Denk [Thu, 8 Sep 2011 02:10:20 +0000 (02:10 +0000)]
YAFFS2: fs/yaffs2/yaffs_nand.[hc] - fix build warnings

Fix these:
yaffs_guts.c: In function 'yaffs_Scan':
yaffs_guts.c:5436: warning: pointer targets in passing argument 4 of 'yaffs_QueryInitialBlockState' differ in signedness
yaffs_guts.c: In function 'yaffs_ScanBackwards':
yaffs_guts.c:6017: warning: pointer targets in passing argument 4 of 'yaffs_QueryInitialBlockState' differ in signedness
yaffs_nand.c: In function 'yaffs_QueryInitialBlockState':
yaffs_nand.c:109: warning: pointer targets in passing argument 4 of 'dev->queryNANDBlock' differ in signedness
yaffs_nand.c:113: warning: pointer targets in passing argument 4 of 'yaffs_TagsCompatabilityQueryNANDBlock' differ in signedness

Signed-off-by: Wolfgang Denk <wd@denx.de>
8 years agoYAFFS2: fs/yaffs2/Makefile - fix build warnings
Wolfgang Denk [Thu, 8 Sep 2011 02:10:19 +0000 (02:10 +0000)]
YAFFS2: fs/yaffs2/Makefile - fix build warnings

Drop the "-DNO_Y_INLINE" setting to fix these:
yaffs_guts.h:806: warning: 'yaffs_GetBlockInfo' defined but not used

Impact on image size is negligible - for the VCMA9 board the text
segment size grew from 496353 to 496357 bytes (i. e. 0.0008%);
total image size even remained constant.

Signed-off-by: Wolfgang Denk <wd@denx.de>
8 years agoYAFFS2: fs/yaffs2/yaffscfg.c - fix build warnings
Wolfgang Denk [Thu, 8 Sep 2011 02:10:18 +0000 (02:10 +0000)]
YAFFS2: fs/yaffs2/yaffscfg.c - fix build warnings

Fix these:
yaffscfg.c: In function 'cmd_yaffs_mread_file':
yaffscfg.c:316: warning: format '%08x' expects type 'unsigned int', but argument 3 has type 'char *'
yaffscfg.c: In function 'cmd_yaffs_ls': yaffscfg.c:371: warning: format '%7d' expects type 'int', but argument 3 has type 'off_t'

Signed-off-by: Wolfgang Denk <wd@denx.de>
8 years agoYAFFS2: cmd_yaffs2.c - fix build warnings
Wolfgang Denk [Thu, 8 Sep 2011 02:10:17 +0000 (02:10 +0000)]
YAFFS2: cmd_yaffs2.c - fix build warnings

Fix these:
cmd_yaffs2.c: In function 'do_ywr':
cmd_yaffs2.c:69: warning: format '%x' expects type 'unsigned int', but argument 2 has type 'ulong'
cmd_yaffs2.c:69: warning: format '%x' expects type 'unsigned int', but argument 3 has type 'ulong'

Signed-off-by: Wolfgang Denk <wd@denx.de>
8 years agonet/eth.c: throw BUG for eth_get_dev_by_name(NULL)
Helmut Raiger [Mon, 22 Aug 2011 00:17:17 +0000 (00:17 +0000)]
net/eth.c: throw BUG for eth_get_dev_by_name(NULL)

eth_get_dev_by_name() is not safe to use for devname being NULL
as it uses strcmp. This patch makes it fail with a BUG().

Signed-off-by: Helmut Raiger <helmut.raiger@hale.at>
Acked-by: Mike Frysinger <vapier@gentoo.org>
8 years agosmc911x: Fix build warnings
Wolfgang Denk [Thu, 8 Sep 2011 01:04:27 +0000 (01:04 +0000)]
smc911x: Fix build warnings

Commit 6af1d41 "smc911x MII made available" was missing a few "const"
qualifiers.  Fix the resulting in build warnings:

smc911x.c: In function 'smc911x_initialize':
smc911x.c:297: warning: passing argument 2 of 'miiphy_register' from incompatible pointer type
smc911x.c:297: warning: passing argument 3 of 'miiphy_register' from incompatible pointer type

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Helmut Raiger <helmut.raiger@hale.at>
8 years agopowerpc/mpc8610hpcd: set pci1_hose.config_table after fsl_setup_hose
Zhao Chenhui [Wed, 24 Aug 2011 05:20:06 +0000 (13:20 +0800)]
powerpc/mpc8610hpcd: set pci1_hose.config_table after fsl_setup_hose

The function fsl_setup_hose clears the variable pci1_hose.
Set pci1_hose.config_table after it.

Signed-off-by: Zhao Chenhui <chenhui.zhao@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
8 years agopowerpc/mpc8548cds: set pci1_hose.config_table after fsl_setup_hose
Zhao Chenhui [Wed, 24 Aug 2011 05:20:04 +0000 (13:20 +0800)]
powerpc/mpc8548cds: set pci1_hose.config_table after fsl_setup_hose

The function fsl_setup_hose clears the variable pci1_hose.
Set pci1_hose.config_table after it.

Signed-off-by: Zhao Chenhui <chenhui.zhao@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
8 years agopowerpc/mpc8568mds: set pci1_hose.config_table after fsl_setup_hose
Zhao Chenhui [Wed, 24 Aug 2011 05:20:05 +0000 (13:20 +0800)]
powerpc/mpc8568mds: set pci1_hose.config_table after fsl_setup_hose

The function fsl_setup_hose clears the variable pci1_hose.
Set pci1_hose.config_table after it.

Signed-off-by: Zhao Chenhui <chenhui.zhao@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
8 years agoMX31: mx31pdk: make use of GPIO framework
Stefano Babic [Wed, 7 Sep 2011 10:51:43 +0000 (10:51 +0000)]
MX31: mx31pdk: make use of GPIO framework

Signed-off-by: Stefano Babic <sbabic@denx.de>
8 years agoPXA: FIX: Deep-sleep return address in stored in PSPR
Marek Vasut [Wed, 7 Sep 2011 03:25:45 +0000 (03:25 +0000)]
PXA: FIX: Deep-sleep return address in stored in PSPR

FIX for a typo-bug: The address is stored in PSPR, not PSSR.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
8 years agosmc911x MII made available
Helmut Raiger [Wed, 29 Jun 2011 00:12:14 +0000 (00:12 +0000)]
smc911x MII made available

The driver already had the MII functions, but they have not been
registered using miiphy_register().

Signed-off-by: Helmut Raiger <helmut.raiger@hale.at>
8 years agocommon: fix behavior of ROUND macro when input is already rounded
Anton Staaf [Fri, 2 Sep 2011 13:45:28 +0000 (13:45 +0000)]
common: fix behavior of ROUND macro when input is already rounded

Currently when you call ROUND with a value that is already a
multiple of the second parameter it will return a value that is
one multiple larger, instead of returning the value passed in.

There are only two types of usage of ROUND currently, one in
various config files to round CONFIG_SYS_MALLOC_LEN to a multiple
of 4096 bytes.  The other in cmd_sf.c where the incorrect behavior
of ROUND is worked around be subtracting one from the length argument
before passing it to ROUND.

This patch fixes ROUND and removes the workaround from cmd_sf.  It
also results in all of the malloc pools that use ROUND to compute
their size shrinking by 4KB.

Cc: Lukasz Majewski <l.majewski@samsung.com>
Cc: Mike Frysinger <vapier@gentoo.org>
8 years agoMerge branch 'master' of git://git.denx.de/u-boot-mmc
Wolfgang Denk [Wed, 7 Sep 2011 20:22:38 +0000 (22:22 +0200)]
Merge branch 'master' of git://git.denx.de/u-boot-mmc

* 'master' of git://git.denx.de/u-boot-mmc:
  ftsdc010: add support of ftsdc010 mmc controller
  mmc: Fix mmc_send_status()

8 years agoMerge branch 'master' of git://git.denx.de/u-boot-video
Wolfgang Denk [Wed, 7 Sep 2011 20:20:38 +0000 (22:20 +0200)]
Merge branch 'master' of git://git.denx.de/u-boot-video

* 'master' of git://git.denx.de/u-boot-video:
  VIDEO: mb86r0xgdc.c: fix warning: unused variable 'i'

8 years agoI2C: mxc: fix compilation for MX31
Stefano Babic [Tue, 30 Aug 2011 00:51:14 +0000 (00:51 +0000)]
I2C: mxc: fix compilation for MX31

Signed-off-by: Stefano Babic <sbabic@denx.de>
CC: Heiko Schocher <hs@denx.de>
Acked-by: Heiko Schocher <hs@denx.de>
8 years agoMX31: fix missing mxc_get_clk() call
Stefano Babic [Tue, 30 Aug 2011 00:51:13 +0000 (00:51 +0000)]
MX31: fix missing mxc_get_clk() call

Add missing case to be used in common MXC code.

Signed-off-by: Stefano Babic <sbabic@denx.de>
8 years agoarm: tegra2: fix out-of-tree build
Che-liang Chiou [Tue, 23 Aug 2011 00:03:12 +0000 (00:03 +0000)]
arm: tegra2: fix out-of-tree build

The out-of-tree build fails because the Makefiles in question depend on
source files of another directory but do not explicitly mkdir that
directory.

As a matter of fact, other Makefiles under board/*/ directory that refer
to source files under another directory explicitly call mkdir.

This patch adds explicit mkdir's to the Makefiles in question, and
verifies that out-of-tree build is working.

Signed-off-by: Che-Liang Chiou <clchiou@chromium.org>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
8 years agoomap24xx: fix 'reset_timer_masked' declaration error
Wolfgang Denk [Mon, 5 Sep 2011 05:55:59 +0000 (05:55 +0000)]
omap24xx: fix 'reset_timer_masked' declaration error

Commit 17659d7 "Timer: Remove reset_timer_masked()" introduced a
static declaration for reset_timer_masked() which causes build errors:

timer.c:45: error: static declaration of 'reset_timer_masked' follows non-static declaration
include/asm/u-boot-arm.h:70: error: previous declaration of 'reset_timer_masked' was here

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Graeme Russ <graeme.russ@gmail.com>
Cc: Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
Cc: Sandeep Paulraj <s-paulraj@ti.com>
8 years agoda8xxevm: Fix warning: unused variable 'val'
Wolfgang Denk [Mon, 5 Sep 2011 05:26:27 +0000 (05:26 +0000)]
da8xxevm: Fix warning: unused variable 'val'

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
Cc: Sandeep Paulraj <s-paulraj@ti.com>
Cc: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
8 years agoARM: PXA: remove broken "zylonite" board.
Wolfgang Denk [Mon, 5 Sep 2011 10:00:30 +0000 (10:00 +0000)]
ARM: PXA: remove broken "zylonite" board.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
Cc: Marek Vasut <marek.vasut@gmail.com>
Acked-by: Marek Vasut <marek.vasut@gmail.com>
8 years agoARM: remove broken "shannon" board.
Wolfgang Denk [Mon, 5 Sep 2011 12:37:34 +0000 (14:37 +0200)]
ARM: remove broken "shannon" board.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
Cc: Rolf Offermanns <rof@sysgo.de>
8 years agoARM: remove broken "modnet50" board.
Wolfgang Denk [Mon, 5 Sep 2011 12:37:33 +0000 (14:37 +0200)]
ARM: remove broken "modnet50" board.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
Cc: Thomas Elste <info@elste.org>
8 years agoARM: remove broken "lpc2292sodimm" board.
Wolfgang Denk [Mon, 5 Sep 2011 12:37:32 +0000 (14:37 +0200)]
ARM: remove broken "lpc2292sodimm" board.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
8 years agoARM: remove broken "lart" board.
Wolfgang Denk [Mon, 5 Sep 2011 12:37:31 +0000 (14:37 +0200)]
ARM: remove broken "lart" board.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
Cc: Alex Züpke <azu@sysgo.de>
8 years agoARM: remove broken "impa7" board.
Wolfgang Denk [Mon, 5 Sep 2011 12:37:30 +0000 (14:37 +0200)]
ARM: remove broken "impa7" board.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
Cc: Marius Gröger <mag@sysgo.de>
8 years agoARM: remove broken "gcplus" board.
Wolfgang Denk [Mon, 5 Sep 2011 12:37:29 +0000 (14:37 +0200)]
ARM: remove broken "gcplus" board.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
Cc: George G. Davis <gdavis@mvista.com>
8 years agoARM: remove broken "evb4510" board.
Wolfgang Denk [Mon, 5 Sep 2011 12:37:28 +0000 (14:37 +0200)]
ARM: remove broken "evb4510" board.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
Cc: Curt Brune <curt@cucy.com>
8 years agoARM: remove broken "ep7312" board.
Wolfgang Denk [Mon, 5 Sep 2011 12:37:27 +0000 (14:37 +0200)]
ARM: remove broken "ep7312" board.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
Cc: Marius Gröger <mag@sysgo.de>
8 years agoARM: remove broken "dnp1110" board.
Wolfgang Denk [Mon, 5 Sep 2011 12:37:26 +0000 (14:37 +0200)]
ARM: remove broken "dnp1110" board.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
Cc: Alex Züpke <azu@sysgo.de>
8 years agoARM: remove broken "SMN42" board.
Wolfgang Denk [Mon, 5 Sep 2011 02:37:25 +0000 (02:37 +0000)]
ARM: remove broken "SMN42" board.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
8 years agodoc/README.scrapyard: Update commit IDs or board removals
Wolfgang Denk [Mon, 5 Sep 2011 12:33:34 +0000 (14:33 +0200)]
doc/README.scrapyard: Update commit IDs or board removals

Signed-off-by: Wolfgang Denk <wd@denx.de>
8 years agoMakefile : fix generation of cpu related asm-offsets.h
Stefano Babic [Mon, 5 Sep 2011 04:32:28 +0000 (04:32 +0000)]
Makefile : fix generation of cpu related asm-offsets.h

commit 0edf8b5b2fa0d210ebc4d6da0fd1aceeb7e44e47 breaks
building on a different directory with the O= parameter.
The patch wil fix this issue, generating always asm-offsets.h before
the other targets.

Signed-off-by: Stefano Babic <sbabic@denx.de>
CC: Matthias Weisser <weisserm@arcor.de>
CC: Wolfgang Denk <wd@denx.de>
8 years agoVIDEO: mb86r0xgdc.c: fix warning: unused variable 'i'
Wolfgang Denk [Mon, 5 Sep 2011 19:51:33 +0000 (21:51 +0200)]
VIDEO: mb86r0xgdc.c: fix warning: unused variable 'i'

Fix build warning:

Configuring for jadecpu board...
mb86r0xgdc.c: In function 'dsp_init':
mb86r0xgdc.c:60: warning: unused variable 'i'

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Anatolij Gustschin <agust@denx.de>
8 years agoFlush cache after the OS image is loaded into the memory.
Diana CRACIUN [Wed, 31 Aug 2011 02:45:23 +0000 (02:45 +0000)]
Flush cache after the OS image is loaded into the memory.

Since we are loading an executable image into memory we need flush it
out of the cache to possible maintain coherence on CPUs with split
instruction and data caches.  We do this for other executable image
loading command.

On PowerPC once we do this we no longer need to explicitly flush the
dcache on multi-core systems in the BOOTM_STATE_OS_PREP phase.  We now
treat the BOOTM_STATE_OS_PREP as a no-op to maintain backwards
compatibility with the bootm subcommand.

Signed-off-by: James Yang <James.Yang@freescale.com>
Signed-off-by: Diana CRACIUN <Diana.Craciun@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
8 years agoCorrect call to eth_write_hwaddr()
Simon Glass [Tue, 30 Aug 2011 05:51:00 +0000 (05:51 +0000)]
Correct call to eth_write_hwaddr()

This fixes "Warning: failed to set MAC address" on platforms which rely on
an 'ethaddr' environment variable to set the MAC address.

This bug was introduced by this commit:

7616e785 Add Ethernet hardware MAC address framework to usbnet

Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Kumar Gala <galak@kernel.crashing.org>
Tested-by: Michal Simek <monstr@monstr.eu>
Tested-by: Heiko Schocher <hs@denx.de>