From 6a30c4ca626755699865282867f912cea8f0329f Mon Sep 17 00:00:00 2001 From: wdenk Date: Wed, 21 Aug 2002 21:22:07 +0000 Subject: [PATCH] Initial revision --- cpu/mpc8xx/status_led.c | 168 ++++++++++++++++++++++++++++++++++++++++ rtc/Makefile | 46 +++++++++++ 2 files changed, 214 insertions(+) create mode 100644 cpu/mpc8xx/status_led.c create mode 100644 rtc/Makefile diff --git a/cpu/mpc8xx/status_led.c b/cpu/mpc8xx/status_led.c new file mode 100644 index 0000000000..d8aaeec55d --- /dev/null +++ b/cpu/mpc8xx/status_led.c @@ -0,0 +1,168 @@ +/* + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include + +/* + * The purpose of this code is to signal the operational status of a + * target which usually boots over the network; while running in + * PCBoot, a status LED is blinking. As soon as a valid BOOTP reply + * message has been received, the LED is turned off. The Linux + * kernel, once it is running, will start blinking the LED again, + * with another frequency. + */ + +/* ------------------------------------------------------------------------- */ + +#ifdef CONFIG_STATUS_LED + +typedef struct { + ulong mask; + int state; + int period; + int cnt; +} led_dev_t; + +led_dev_t led_dev[] = { + { STATUS_LED_BIT, + STATUS_LED_STATE, + STATUS_LED_PERIOD, + 0, + }, +#if defined(STATUS_LED_BIT1) + { STATUS_LED_BIT1, + STATUS_LED_STATE1, + STATUS_LED_PERIOD1, + 0, + }, +#endif +#if defined(STATUS_LED_BIT2) + { STATUS_LED_BIT2, + STATUS_LED_STATE2, + STATUS_LED_PERIOD2, + 0, + }, +#endif +#if defined(STATUS_LED_BIT3) + { STATUS_LED_BIT3, + STATUS_LED_STATE3, + STATUS_LED_PERIOD3, + 0, + }, +#endif +}; + +#define MAX_LED_DEV (sizeof(led_dev)/sizeof(led_dev_t)) + +static int status_led_init_done = 0; + +static void status_led_init (void) +{ + volatile immap_t *immr = (immap_t *)CFG_IMMR; + int i; + + for (i=0; iSTATUS_LED_PAR &= ~(ld->mask); +#ifdef STATUS_LED_ODR + immr->STATUS_LED_ODR &= ~(ld->mask); +#endif +#if (STATUS_LED_ACTIVE == 0) + if (ld->state == STATUS_LED_ON) + immr->STATUS_LED_DAT &= ~(ld->mask); + else + immr->STATUS_LED_DAT |= ld->mask ; +#else + if (ld->state == STATUS_LED_ON) + immr->STATUS_LED_DAT |= ld->mask ; + else + immr->STATUS_LED_DAT &= ~(ld->mask); +#endif + immr->STATUS_LED_DIR |= ld->mask ; + } + + status_led_init_done = 1; +} + +void status_led_tick (ulong timestamp) +{ + volatile immap_t *immr = (immap_t *)CFG_IMMR; + int i; + + if (!status_led_init_done) + status_led_init(); + + for (i=0; istate != STATUS_LED_BLINKING) + continue; + + if (++(ld->cnt) >= ld->period) { + immr->STATUS_LED_DAT ^= ld->mask; + ld->cnt -= ld->period; + } + } +} + +void status_led_set (int led, int state) +{ + volatile immap_t *immr = (immap_t *)CFG_IMMR; + led_dev_t *ld; + + if (led < 0 || led >= MAX_LED_DEV) + return; + + if (!status_led_init_done) + status_led_init(); + + ld = &led_dev[led]; + + switch (state) { + default: + return; + case STATUS_LED_BLINKING: + ld->cnt = 0; /* always start with full period */ + /* fall through */ /* always start with LED _ON_ */ + case STATUS_LED_ON: +#if (STATUS_LED_ACTIVE == 0) + immr->STATUS_LED_DAT &= ~(ld->mask); +#else + immr->STATUS_LED_DAT |= ld->mask ; +#endif + break; + case STATUS_LED_OFF: +#if (STATUS_LED_ACTIVE == 0) + immr->STATUS_LED_DAT |= ld->mask ; +#else + immr->STATUS_LED_DAT &= ~(ld->mask); +#endif + break; + } + ld->state = state; +} + +#endif /* CONFIG_STATUS_LED */ diff --git a/rtc/Makefile b/rtc/Makefile new file mode 100644 index 0000000000..0e1fd0f0d5 --- /dev/null +++ b/rtc/Makefile @@ -0,0 +1,46 @@ +# +# (C) Copyright 2001 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +#CFLAGS += -DDEBUG + +LIB = librtc.a + +OBJS = date.o ds1302.o ds1306.o ds1337.o ds1556.o ds174x.o \ + m41t11.o m48t35ax.o mc146818.o mk48t59.o \ + mpc8xx.o pcf8563.o + +all: $(LIB) + +$(LIB): $(START) $(OBJS) + $(AR) crv $@ $(OBJS) + +######################################################################### + +.depend: Makefile $(OBJS:.o=.c) + $(CC) -M $(CFLAGS) $(OBJS:.o=.c) > $@ + +sinclude .depend + +######################################################################### -- 2.39.2