From be4a87f11e297a5cededbf7dd71c0248f3874acd Mon Sep 17 00:00:00 2001
From: Martin Krause <martin.krause@tqs.de>
Date: Wed, 24 Oct 2007 08:41:27 +0200
Subject: [PATCH] TQM5200S: fix commands for STK52xx base board because of
 missing SM501 grafic controller

Some commands for the STK52xx base board try to access the SM501 grafic
controller. But the TQM5200S has no grafic controller (only the TQM5200
and the TQM5200B have). This patch deactivates the commands accessing
the SM501 for the TQM5200S.

Signed-off-by: Martin Krause <martin.krause@tqs.de>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
---
 board/tqm5200/cmd_stk52xx.c | 17 ++++++++++-------
 board/tqm5200/tqm5200.c     |  2 ++
 2 files changed, 12 insertions(+), 7 deletions(-)

diff --git a/board/tqm5200/cmd_stk52xx.c b/board/tqm5200/cmd_stk52xx.c
index b746679afa..27a6c4163d 100644
--- a/board/tqm5200/cmd_stk52xx.c
+++ b/board/tqm5200/cmd_stk52xx.c
@@ -561,7 +561,7 @@ void led_init(void)
 	gpt->gpt6.emsr |=  0x00000024;
 	gpt->gpt7.emsr |=  0x00000024;
 
-
+#ifndef CONFIG_TQM5200S
 	/* enable SM501 GPIO control (in both power modes) */
 	*(vu_long *) (SM501_MMIO_BASE+SM501_POWER_MODE0_GATE) |=
 		POWER_MODE_GATE_GPIO_PWM_I2C;
@@ -574,6 +574,7 @@ void led_init(void)
 
 	/* configure SM501 gpio pins 48-51 as output */
 	*(vu_long *) (SM501_MMIO_BASE+SM501_GPIO_DATA_DIR_HIGH) |= (0xF << 16);
+#endif /* !CONFIG_TQM5200S */
 }
 
 /*
@@ -650,7 +651,7 @@ int do_led(char *argv[])
 			gpt->gpt7.emsr &=  ~(1 << 4);
 		}
 		break;
-
+#ifndef CONFIG_TQM5200S
 	case 24:
 		if (strcmp (argv[3], "on") == 0) {
 			*(vu_long *) (SM501_MMIO_BASE+SM501_GPIO_DATA_LOW) |=
@@ -730,7 +731,7 @@ int do_led(char *argv[])
 				~(0x1 << 19);
 		}
 		break;
-
+#endif /* !CONFIG_TQM5200S */
 	default:
 		printf ("%s: invalid led number %s\n", __FUNCTION__, argv[2]);
 		return 1;
@@ -1110,7 +1111,7 @@ int do_rs232(char *argv[])
 	return error_status;
 }
 
-#ifndef CONFIG_FO300
+#if !defined(CONFIG_FO300) && !defined(CONFIG_TQM5200S)
 static void sm501_backlight (unsigned int state)
 {
 	if (state == BL_ON) {
@@ -1120,7 +1121,7 @@ static void sm501_backlight (unsigned int state)
 		*(vu_long *)(SM501_MMIO_BASE+SM501_PANEL_DISPLAY_CONTROL) &=
 			~((1 << 26) | (1 << 27));
 }
-#endif
+#endif /* !CONFIG_FO300 & !CONFIG_TQM5200S */
 
 int cmd_fkt(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 {
@@ -1160,7 +1161,7 @@ int cmd_fkt(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 			else
 				printf ("Error\n");
 			return rcode;
-#ifndef CONFIG_FO300
+#if !defined(CONFIG_FO300) && !defined(CONFIG_TQM5200S)
 		} else if (strncmp (argv[1], "backlight", 4) == 0) {
 			if (strncmp (argv[2], "on", 2) == 0) {
 				sm501_backlight (BL_ON);
@@ -1170,7 +1171,7 @@ int cmd_fkt(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 				sm501_backlight (BL_OFF);
 				return 0;
 			}
-#endif
+#endif /* !CONFIG_FO300 & !CONFIG_TQM5200S */
 		}
 		break;
 
@@ -1228,8 +1229,10 @@ U_BOOT_CMD(
 	"     - loopback plug for X83 required\n"
 	"fkt rs232 number\n"
 	"     - loopback plug(s) for X2 required\n"
+#ifndef CONFIG_TQM5200S
 	"fkt backlight on/off\n"
 	"     - switch backlight on or off\n"
+#endif /* !CONFIG_TQM5200S */
 );
 #elif defined(CONFIG_FO300)
 U_BOOT_CMD(
diff --git a/board/tqm5200/tqm5200.c b/board/tqm5200/tqm5200.c
index 29d6f00427..d10cb5937d 100644
--- a/board/tqm5200/tqm5200.c
+++ b/board/tqm5200/tqm5200.c
@@ -543,6 +543,7 @@ int last_stage_init (void)
 		__asm__ volatile ("sync");
 	}
 
+#ifndef CONFIG_TQM5200S	/* The TQM5200S has no SM501 grafic controller */
 	/*
 	 * Check for Grafic Controller
 	 */
@@ -586,6 +587,7 @@ int last_stage_init (void)
 #endif
 
 	return 0;
+#endif /* !CONFIG_TQM5200S */
 }
 
 #ifdef CONFIG_VIDEO_SM501
-- 
2.39.2