From f4eb54529bb3664c3a562e488b460fe075f79d67 Mon Sep 17 00:00:00 2001 From: Wolfgang Denk Date: Sun, 7 Jan 2007 00:13:11 +0100 Subject: [PATCH] Prepare for release 1.2.0 --- CHANGELOG | 125 +++++++++++++++++++++++++++++++++++++++++++++++++++++- Makefile | 4 +- 2 files changed, 125 insertions(+), 4 deletions(-) diff --git a/CHANGELOG b/CHANGELOG index e0b9be9d2d..3403d063bf 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -1,3 +1,124 @@ +commit f07ae7a9daef27a3d0213a4f3fe39d5342173c02 +Author: Stefan Roese +Date: Sat Jan 6 15:58:09 2007 +0100 + + [PATCH] 44x: Fix problem with DDR controller setup (refresh rate) + + This patch fixes a problem with an incorrect setup for the refresh + timer of the 44x DDR controller in the file cpu/ppc4xx/sdram.c + + Signed-off-by: Stefan Roese + +commit f16c1da9577f06c5fc08651a4065537407de4635 +Author: Stefan Roese +Date: Sat Jan 6 15:56:13 2007 +0100 + + [PATCH] Update ALPR board files + + This update brings the ALPR board support to the newest version. + It also fixes a problem with the NAND driver. + + Signed-off-by: Stefan Roese + +commit cd1d937f90250a32988c37b2b4af8364d25de8ed +Author: Stefan Roese +Date: Fri Jan 5 11:46:05 2007 +0100 + + [PATCH] nand: Fix problem with oobsize calculation + + Here the description from Brian Brelsford : + + The Hynix part returns a 0x1d in the 4th ID byte. The Samsung part + returns a 0x15. In the code fragment below bits [1:0] determine the + page size, it is ANDed via "(extid & 0x3)" then shifted out. The + next field is also ANDed with 0x3. However this is a one bit field + as defined in the Hynix and Samsung parts in the 4th ID byte that + determins the oobsize, not a two bit field. It works on Samsung as + bits[3:2] are 01. However for the Hynix there is a 11 in these two + bits, so the oob size gets messed up. + + I checked the correct linux code and the suggested fix from Brian is + also available in the linux nand mtd driver. + + Signed-off-by: Stefan Roese + +commit a78bc443ae5a4a8ba87590587d5e35bf5a787b2e +Author: Stefan Roese +Date: Fri Jan 5 10:40:36 2007 +0100 + + [PATCH] Clear PLB4A0_ACR[WRP] on Sequoia (440EPx) + + This fix will make the MAL burst disabling patch for the Linux + EMAC driver obsolete. + + Signed-off-by: Stefan Roese + +commit 023889838282b6237b401664f22dd22dfba2c066 +Author: Stefan Roese +Date: Fri Jan 5 10:38:05 2007 +0100 + + [PATCH] Add DDR2 optimization code for Sequoia (440EPx) board + + This code will optimize the DDR2 controller setup on a board specific + basis. + + Note: This code doesn't work right now on the NAND booting image for the + Sequoia board, since it doesn't fit into the 4kBytes for the SPL image. + + Signed-off-by: Stefan Roese + +commit cce4acbb68398634b8d011ed7bb0d12269c84230 +Author: Bartlomiej Sieka +Date: Thu Dec 28 19:08:21 2006 +0100 + + Few V38B changes: + - fix a typo in V38B config file + - move watchdog initialisation earlier in the boot process + - add "wdt=off" to default kernel command line (disables kernel watchdog) + +commit 92eb729bad876725aeea908d2addba0800620840 +Author: Wolfgang Denk +Date: Wed Dec 27 01:26:13 2006 +0100 + + Fix bug in adaption of Stefano Babic's CFI driver patch. + +commit 9c0f42ecfe25f7ffce8ec7a815f03864d723ffe3 +Author: Wolfgang Denk +Date: Sun Dec 24 01:42:57 2006 +0100 + + Minor code cleanup. + +commit d784fdb05900ada3686d5778783e1fb328e9fb66 +Author: Stefano Babic +Date: Tue Dec 12 00:22:42 2006 +0100 + + Fix cfi failure with Spansion Flash (Spansion Flash Devices have a different offset to go into CFI mode) + +commit 1b3c360c235dc684ec06c2d5f183f0a282ce45e2 +Author: Stefan Roese +Date: Fri Dec 22 14:29:40 2006 +0100 + + [PATCH] Fix sequoia flash autodetection (finally correct) + + Now 32MByte and 64MByte FLASH is know to work and other + configurations should work too. + + Signed-off-by: Stefan Roese + +commit 82e5236a8b719543643fd26d5827938ab2b94818 +Author: Wolfgang Denk +Date: Fri Dec 22 10:30:26 2006 +0100 + + Minor code cleanup; update CHANGELOG. + +commit fa23044564091f05d9695beb7b5b9a931e7f41a4 +Author: Heiko Schocher +Date: Thu Dec 21 17:17:02 2006 +0100 + + Added support for the TQM8272 board from TQ + + Signed-off-by: Heiko Schocher + commit c84bad0ef60e7055ab0bd49b93069509cecc382a Author: Bartlomiej Sieka Date: Wed Dec 20 00:29:43 2006 +0100 @@ -210,7 +331,7 @@ Date: Mon Nov 27 17:04:06 2006 +0100 [PATCH] Allow CONFIG_OF_FLAT_TREE to boot a non-arch/powerpc kernel This patch allows an arch/ppc kernel to be booted by just passing 1 or 2 - arguments to bootm. It removes the getenv("disable_of") test that used + arguments to bootm. It removes the getenv("disable_of") test that used to be used for this purpose. Signed-off-by: Grant Likely @@ -908,7 +1029,7 @@ Date: Tue Oct 24 23:47:37 2006 -0500 If a Multi-Image file contains a third image we try to use it as a device tree. The device tree image is assumed to be uncompressed in the - image file. We automatically allocate space for the device tree in memory + image file. We automatically allocate space for the device tree in memory and provide an 8k pad to allow more than a reasonable amount of growth. Additionally, a device tree that was contained in flash will now automatically diff --git a/Makefile b/Makefile index b145be43f4..a973dffc52 100644 --- a/Makefile +++ b/Makefile @@ -22,8 +22,8 @@ # VERSION = 1 -PATCHLEVEL = 1 -SUBLEVEL = 6 +PATCHLEVEL = 2 +SUBLEVEL = 0 EXTRAVERSION = U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION) VERSION_FILE = $(obj)include/version_autogenerated.h -- 2.39.2