karo-tx-uboot.git
2019-07-22 Lothar Waßmannenable filesystem agnostic read/write/ls commands master KARO-TX6-2019-07-31
2019-07-19 Lothar Waßmannkaro: configs: Update the tx6*_defconfig files from...
2019-07-19 Lothar Waßmannmx6: hab: add function to authenticate any data blob...
2019-07-18 Lothar Waßmanncheckpatch.pl: fix 'Unescaped left brace in regex is...
2019-07-18 Lothar Waßmannkaro: tx6ul-8013: prevent stall of mxs_reset() of the...
2019-05-09 Lothar Waßmannkaro: tx6: disable Heartbeat LED in case of error
2019-05-09 Lothar Waßmannkaro: tx6: enable GPT command
2019-05-09 Lothar Waßmanncmd: gpt: remove bogus code leftover from merge conflic...
2019-05-09 Lothar Waßmannkaro: tx6: configure all relevant PMIC registers
2019-05-09 Lothar Waßmannarm: mx6: fix cpu_rev calculation
2019-05-09 Lothar Waßmannarm: mx6: implement refcounting for the ocotp clock...
2019-05-09 Lothar Waßmannkaro: common: remove '_' from DT property names
2019-05-09 Lothar Waßmannkaro: tx6: make pixelclock overridable via DT or 'video...
2019-01-30 Lothar Waßmannkaro: txul: fix LDO4 output voltage
2018-10-17 Lothar Waßmannfix TXUL module name
2018-02-08 Lothar Waßmannkaro: tx6: enable vsnprintf for safer string operations
2018-02-08 Lothar Waßmannkaro: txul: add support for TX-Tester-V5 baseboard
2018-02-08 Lothar Waßmannkaro: txul: read second mac address from fuses
2018-02-08 Lothar Waßmannarm: mx6ull: initialize AIPS-TZ3 bus
2018-01-10 Lothar Waßmannkaro: add workaround for Linux hang on i.MX6QP when...
2018-01-08 Lothar Waßmannkaro: tx6: enable raw initrd support
2018-01-08 Lothar Waßmannkaro: bootce: suppress mtdparts related error message...
2018-01-08 Lothar Waßmannkaro: txul: remove i2c_gpio_pads
2018-01-08 Lothar Waßmannkaro: tx6: change drive strength of Ethernet related...
2018-01-08 Lothar Waßmannimx: mx6: align the SPEED_MED setting with the reset...
2018-01-08 Lothar Waßmannkaro: tx6: indentation cleanup
2018-01-08 Lothar Waßmannkaro: tx6: cleanup i2c_recover implementation
2018-01-08 Lothar Waßmannkaro: tx6: remove duplicate initialization of ENET...
2017-10-25 Lothar Waßmannboard: karo: add support for using Linux simple-panel... KARO-TX6-2017-10-27
2017-07-21 Lothar Waßmannkaro: tx6: add support for TX6QP-8137 KARO-TX6QP-2017-07-21
2017-07-21 Lothar Waßmannkaro: tx6: prevent DTB from either being out of reach...
2017-07-21 Lothar Waßmannkaro: tx6: add support for Ka-Ro TX6UL-8013 KARO-TX6ULL-2017-07-07
2017-07-07 Lothar Waßmannarm: mx6: add support for i.MX6ULL
2017-04-03 Lothar Waßmannkaro: add support for TX6UL-5012
2017-01-04 Lothar Waßmannkaro: tx6: use GP1 fuse for MIPI variant detection KARO-TX6Q-1230_2017-01-04
2016-12-23 Lothar Waßmannkaro: tx6: support MIPI variant in board name KARO-TX6Q-1230-2016-12-23
2016-07-11 Lothar Waßmannkaro: tx6ul: configure some more PMIC regs and disable... KARO-TX-2016-07-11
2016-07-11 Lothar Waßmannkaro: tx6: configure PMIC to a consistent state upon...
2016-07-11 Lothar Waßmannkaro: tx6: fix offset voltage in formulas for calculati...
2016-07-11 Lothar Waßmannkaro: tx6: remove obsolete TX6Q-1020
2016-07-05 Lothar Waßmannkaro: tx6ul: fix wrong board name in U-Boot messages KARO-TX-2016-07-05
2016-07-04 Lothar WaßmannMerge branch 'tx6-bugfix'
2016-07-04 Lothar WaßmannMerge branch 'tx53-bugfix'
2016-07-04 Lothar WaßmannMerge branch 'tx28-bugfix'
2016-07-01 Lothar Waßmannkaro: tx6: remove unreachable 'return' statements
2016-07-01 Lothar Waßmannkaro: tx6: fix miscalculated start block for 'romupdate...
2016-07-01 Lothar Waßmannkaro: tx6ul: rework PMIC support and print PMIC name...
2016-07-01 Lothar Waßmannkaro: tx6ul: enable soft i2c driver and 'i2c' command
2016-07-01 Lothar Waßmannkaro: tx6ul: rework I2C recovery routine to be more...
2016-07-01 Lothar Waßmannkaro: tx6ul: change local 'tx6_' prefixes to 'tx6ul'
2016-07-01 Lothar Waßmannkaro: tx6ul: configure JTAG_* pads for JTAG function...
2016-07-01 Lothar Waßmannkaro: tx6: configure all pads with explicit pad_ctl...
2016-07-01 Lothar Waßmannkaro: tx6: add TX6S LVDS module variants
2016-07-01 Lothar Waßmannkaro: tx6: remove obsolete configs
2016-07-01 Lothar Waßmannkaro: tx6: introduce generic TARGET_EMMC/TARGET_NAND...
2016-06-30 Lothar Waßmannkaro: tx28: fix bugs in 'romupdate' command
2016-06-30 Lothar Waßmannkaro: tx28: enable 'gpio' command
2016-06-30 Lothar Waßmannmxs_gpio: correctly use the GPIO API
2016-06-30 Lothar Waßmannmxs_gpio: improve readability by using '(void *)' on...
2016-06-30 Lothar Waßmannmxs_gpio: remove unused defines
2016-06-30 Lothar Waßmannkaro: tx28: request gpio for acitivity LED and disable...
2016-06-30 Lothar Waßmannkaro: tx28: enable activity led only on stk5-v3 baseboard
2016-06-30 Lothar Waßmannkaro: tx28: enable U-Boot build with different (or...
2016-06-30 Lothar Waßmannkaro: tx28: explicitly configure pad config (voltage...
2016-06-30 Lothar Waßmannkaro: tx28: remove LCD pad configuration from SPL
2016-06-30 Lothar Waßmannmxs: spl: print the actual battery brownout level rathe...
2016-06-30 Lothar Waßmannmxs: spl: adjust delay after setting CLKCTRL_PLL0CTRL0_...
2016-06-30 Lothar Waßmannmxs: spl: use writel() to Set/Clear registers rather...
2016-06-30 Lothar Waßmannmxs: spl: replace bogus early_delay() function with...
2016-06-30 Lothar WaßmannARM: MXS: use 'struct mxs_digctl_regs' to access MXS_HW...
2016-06-30 Lothar Waßmannkaro: tx53: enable 'gpio' command
2016-06-30 Lothar Waßmannkaro: tx53: romupdate: fix calculation of starting...
2016-06-30 Lothar Waßmannkaro: tx53: various fixes for CONFIG_SECURE_BOOT
2016-06-29 Lothar Waßmannfs/fs.c: correctly interpret the '(max)len' parameter...
2016-06-29 Lothar Waßmanncmd_gpio.c: adjust help message depending on gpio_statu...
2016-06-29 Lothar Waßmanncommon/cmd_mtdparts.c: print ECC stats along with parti...
2016-06-29 Lothar Waßmanncommon/cmd_mtdparts.c: use proper return values for...
2016-06-29 Lothar Waßmanncommon/cmd_misc.c: fix return code of sleep command
2016-06-13 Lothar WaßmannMerge branch 'tx28-update' into tx28-bugfix
2016-04-26 Lothar Waßmannkaro: tx6ul: disable the PMIC for '_noenv' U-Boot KARO-TX6-2016-04-26
2016-04-26 Lothar Waßmannkaro: tx6ul: make board string dependent on cpurev
2016-04-26 Lothar Waßmannmx6: clock: use setup_gpmi_io_clk() to change nfc clk...
2016-04-26 Lothar Waßmannmx6: clock: fix integer overflow in calculation of...
2016-04-26 Lothar Waßmannmx6: ocotp: add timeout to busy wait loop
2016-04-26 Lothar Waßmannkaro: tx6: pmic: print PMIC name in boot messages
2016-04-19 Lothar Waßmannarm: mx6: fix NFC clock get/set routines for i.MX6QP... tx6qp-devel
2016-04-19 Lothar Waßmannkaro: tx6: add support for TX6Q-8037 (i.MX6QP)
2016-04-19 Lothar Waßmannkaro: tx6: add support for boards with >= 2GiB memory
2016-04-19 Lothar Waßmannkaro: tx6: disable gpmi clk before changing podf and...
2016-04-19 Lothar Waßmannkaro: tx6: replace open coded interpretation of cpurev...
2016-04-18 Lothar Waßmannkaro: tx6: set LCD x, y dimensions to 0 when disabling LCD
2016-04-18 Lothar Waßmannkaro: tx6: rename CONFIG_SYS_BOOT_CMD_NAND to FDTSAVE_C...
2016-04-13 Lothar Waßmannmx6: clock: take 'num' and 'denom' regs into account...
2016-04-13 Lothar Waßmannnet: fec: use correct sizes to clear and flush descriptors
2016-04-13 Lothar Waßmannrename TX6Q-1033 to TX6Q-1036
2016-03-24 Lothar Waßmannkaro: tx28: supply a valid stack pointer to early SPL...
2016-03-24 Lothar Waßmannkaro: tx28: remove obsolete u-boot.bd
2016-03-24 Lothar Waßmannmxs: spl: remove duplicate debug messages
2016-03-24 Lothar Waßmannkaro: tx6: remove redundant #ifndef CONFIG_TX6_UBOOT_MFG
2016-02-18 Lothar WaßmannMerge branch 'tx53-update-2016-02-03' into karo-tx6 KARO-TX6-2016-03-10
next