]> git.kernelconcepts.de Git - karo-tx-uboot.git/shortlog
karo-tx-uboot.git
2015-09-10 Lokesh VutlaARM: keystone2: Use common definition for clk_get_rate
2015-09-10 Lokesh VutlaARM: keystone2: Remove unsed external clocks
2015-09-10 Lokesh VutlaARM: keystone2: Cleanup init_pll definition
2015-09-10 Lokesh VutlaARM: keystone2: Use common structure for PLLs
2015-09-10 Lokesh VutlaARM: keystone2: Fix dev and arm speed detection
2015-09-10 Lokesh VutlaARM: keystone2: Cleanup PLL init code
2015-09-10 Lokesh VutlaARM: keystone2: Enable CONFIG_DISPLAY_CPUINFO
2015-09-10 Lokesh VutlaARM: keystone2: Cleanup SoC detection
2015-09-10 Nishanth MenonARM: DRA72: disable workaround for 801819
2015-09-10 Nishanth MenonARM: DRA7/ OMAP5: implement Auxiliary Control Register...
2015-09-10 Nishanth MenonARM: Introduce erratum workaround for 801819
2015-09-10 Linus Walleijintegrator: switch to DM serial port
2015-09-10 Wu, Joshusb: ohci: enable cache support
2015-09-10 Wu, JoshARM: cache: implement a default weak flush_cache()...
2015-09-10 Wu, JoshARM: cache: add an empty stub function for invalidate...
2015-09-10 Wu, Joshm68k: cache: add an empty stub functions for invalidate...
2015-09-10 Ruchika GuptaCorrect License and Copyright information on few files
2015-09-10 Stefano Babicti: drop value from CONFIG_SYS_NAND_BUSWIDTH_16BIT
2015-09-10 Stefano Babicmcx: add Ethernet over USB
2015-09-10 Stefano Babicomap3: fix NAND support for mcx board
2015-09-10 Masahiro Yamadadrivers: hierarchize drivers Kconfig menu
2015-09-10 Codrin Ciubotariuinclude/bitfield.h: Assure new bitfield value doesn...
2015-09-10 Alexander Steinarm/rpi: Enable dcache
2015-09-10 Alexander Steindwc2: Add dcache support
2015-09-10 Alexander Steinarm/mach-bcm283x/mbox: Flush and invalidate dcache...
2015-09-10 Alexander SteinARM: bcm283x: Allocate all mailbox buffers cacheline...
2015-09-10 Alexander SteinARM: bcm283x: Define CONFIG_SYS_CACHELINE_SIZE
2015-09-10 Alexander Steinarm1136/arm1176: Merge cache handling code
2015-09-10 Alexander Steinarm1136: Remove dead code
2015-09-10 Paul Kocialkowskisniper: Keypad support, with recovery and fastboot...
2015-09-10 Paul Kocialkowskisniper: Power off when the power on reason is not a...
2015-09-10 Paul Kocialkowskisniper: Power button reset support
2015-09-10 Paul Kocialkowskisniper: Fastboot support
2015-09-10 Paul Kocialkowskisniper: Pass serial number through ATAG
2015-09-10 Paul Kocialkowskisniper: Serial number support, obtained from die ID
2015-09-10 Paul Kocialkowskisniper: OMAP3 reboot mode support
2015-09-10 Paul KocialkowskiLG Optimus Black (P970) codename sniper support
2015-09-10 Paul Kocialkowskiomap3: Reboot mode support
2015-09-10 Paul Kocialkowskiinput: twl4030: Keypad scan and input
2015-09-10 Paul Kocialkowskiinput: TWL4030 input support for power button, USB...
2015-09-10 Paul Kocialkowskipower: twl4030: Power off support
2015-09-10 Vladimir Zapolskiylpc32xx: devkit3250: add spl build support
2015-09-10 Vladimir Zapolskiylpc32xx: devkit3250: update of board configuration
2015-09-10 Vladimir Zapolskiynand: lpc32xx: add SLC NAND controller support
2015-09-10 Vladimir Zapolskiyspl: nand: simple: replace readb() with chip specific...
2015-09-10 Rob Herringimage: fix Android ramdisk support when dtb is specified
2015-09-10 Mark TomlinsonJFFS2: Use merge sort when parsing filesystem
2015-09-10 Mark TomlinsonJFFS2: Use CLEANMARKER to reduce scanning time
2015-09-10 Mark TomlinsonJFFS2: Change scansize to match linux kernel
2015-09-10 Mark TomlinsonJFFS2: Optimize building lists during scan
2015-09-10 Mark TomlinsonJFFS2: Improve speed reading flash files
2015-09-10 Mark TomlinsonJFFS2: Only list each directory entry once
2015-09-10 Mark TomlinsonJFFS2: Speed up and fix comparison functions
2015-09-10 Mark TomlinsonJFFS2: Return early when file read not necessary
2015-09-10 Jiandong Zhengarm: bcmcygnus: Enable Ethernet support
2015-09-10 Heiko Schocherarm, at91: support for sam9260 based smartweb board
2015-09-10 Heiko Schochernand, atmel: remove udelay in spl_nand_erase_one()
2015-09-10 Heiko Schocherspl, common, serial: build SPL without serial support
2015-09-10 Stefan Roesenet: e1000: Increase autoneg timeout to 8 seconds
2015-09-10 Max Krummenachertftp.c: fix CONFIG_TFTP_TSIZE for small files
2015-09-10 Dennis Gilmoreport vexpress to use distro boot commands
2015-09-10 Dennis GilmoreMove setting CONFIG_BOOTP_VCI_STRING to before includin...
2015-09-10 Dennis GilmorePXE: if a board has set its own value for CONFIG_BOOTP_...
2015-09-10 Rob HerringARM: highbank: remove DRAM bank setup
2015-09-10 Simon Glassdm: pmic: max77686: Correct two typos in a comment
2015-09-10 Peng Fanpower: regulator: max77686 correct variable type
2015-09-10 Peng Fanfsl: common: pfuze: no use original pfuze code if DM_PMIC
2015-09-10 Peng Fanpower: regulator: add pfuze100 support
2015-09-10 Peng Fanpower: pmic: pfuze100 support driver model
2015-09-10 Peng Fanpower: regulator: update comments for regulator-name
2015-09-10 Peng Fanpower: regulator use node name when no regulator-name
2015-09-10 Peng Fanpower: pfuze100 correct SWBST macro definition
2015-09-10 Simon Glassmmc: dw_mmc: Avoid using printf() for errors
2015-09-10 Jiandong Zhengnet: phy: broadcom: Add BCM Cygnus PHY
2015-09-10 Jörg Krausenet: phy: delay only if reset handler is registered
2015-09-10 Jörg Krausenet: phy: fix data type of phy_id
2015-09-10 Daniel Inderbitzinqoriq eth.c bugfix: handle received corrupted frames...
2015-09-10 Vladimir Zapolskiynet: lpc32xx: add RMII phy mode support
2015-09-10 Vladimir Zapolskiynet: lpc32xx: improve MAC configuration on reset and...
2015-09-10 Vladimir Zapolskiynet: lpc32xx: connect MAC to phy with CONFIG_PHY_ADDR id
2015-09-10 Vladimir Zapolskiynet: lpc32xx: correct command register reset value
2015-09-10 Jeroen Hofsteenet: davinci_emac: don't teardown inactive rx channel
2015-09-10 Clemens Grubernet: Add support for Marvell 88E1510 PHY
2015-09-10 Clemens Grubernet: Improve 88E151x PHY initialization
2015-09-10 Wu, Joshnet: macb: add gmac multi-queue support
2015-09-10 Shengzhou Liunet/phy: set led for rtl8211f phy
2015-09-10 Tim Harveye1000: remove unnecessary clearing of SWSM.SWSM_SMBI
2015-09-10 Tim HarveyRevert "e1000: fix sw fw sync on igb i210/i211"
2015-09-10 Tim Harveye1000: releasing semaphore once no longer needed
2015-09-10 Marek Vasutmmc: dw_mmc: Improve handling of data transfer failure
2015-09-10 Marek Vasutmmc: dw_mmc: Zap endless timeout
2015-09-10 Marek Vasutmmc: dw_mmc: Stop bounce buffer even in case of failure
2015-09-10 Hans de Goededm: serial: Add a REQUIRE_SERIAL_CONSOLE option for...
2015-09-10 Hans de Goedesunxi: display: Add composite video out support
2015-09-10 Hans de Goedesunxi: display: Add support for interlaced modes
2015-09-10 Hans de Goedesunxi: display: Add a few extra register and constant...
2015-09-10 Hans de Goedesunxi: display: Correct clk_delay calculations for...
2015-09-10 Hans de Goedesunxi: display: Replace #ifdef-ery with helper functions
2015-09-10 Hans de Goedesunxi: Enable musb in host mode on the Jesurun Q5
2015-09-10 Hans de Goedesunxi: Do not add a stdout-path alias to dts on boards...
next