]> git.kernelconcepts.de Git - karo-tx-uboot.git/shortlog
karo-tx-uboot.git
2013-12-06 Lothar WaßmannMerge branch 'fdt-cleanup' into uboot-rel
2013-12-06 Lothar WaßmannMerge branch 'tx6-fixes' into uboot-rel
2013-12-06 Lothar WaßmannMerge branch 'tx53-fixes' into uboot-rel
2013-12-06 Lothar WaßmannMerge branch 'tx51-fixes' into uboot-rel
2013-12-06 Lothar WaßmannMerge branch 'tx48-fixes' into uboot-rel
2013-12-06 Lothar Waßmannkaro: fdt: move list of supported touchpanels out of...
2013-12-06 Lothar Waßmannkaro: fdt: use an alias to find CAN transceiver regulator
2013-12-06 Lothar Waßmannkaro: tx6: general cleanups
2013-12-06 Lothar Waßmannkaro: tx53: general cleanups
2013-12-06 Lothar Waßmannkaro: tx48: add compatible for gpmc nand in Linux kerne...
2013-12-06 Lothar Waßmannkaro: tx48: make 'struct node_info' static
2013-12-06 Lothar Waßmannvideo: mxsfb: honor sync and clock polarity flags
2013-12-06 Lothar Waßmannvideo: mxsfb: use system allocated framebuffer
2013-12-06 Lothar Waßmannvideo: mxsfb: general cleanups
2013-12-06 Lothar Waßmannarm: mx28: fix invalid definition and use of SET/CLR...
2013-12-06 Lothar Waßmannkaro: tx51: reduce DDR clock to 166 MHz for TX51-8xx1
2013-12-06 Lothar Waßmannkaro: tx51: remove obsolete tx51_6xxx configs
2013-12-02 Lothar Waßmannkaro: tx53: don't print decimals for voltages
2013-12-02 Lothar Waßmannkaro: tx53: set clk_rate_low for LDO2 only
2013-12-02 Lothar Waßmannkaro: tx53: don't enable burst mode for buck-boost
2013-12-02 Lothar Waßmannkaro: tx53: check for <CTRL-C> only to abort certain...
2013-11-29 Lothar Waßmannlcd: splashscreen: fix broken bmp8 format
2013-11-28 Lothar Waßmannkaro: tx48: move 'dtb' partition just before 'bbt'
2013-11-28 Lothar Waßmannkaro: tx48: fix U-Boot heartbeat LED
2013-11-28 Lothar Waßmannkaro: tx48: remove useless MUX_CFG() macro
2013-11-28 Lothar Waßmannkaro: tx48: check for <CTRL-C> only to abort certain...
2013-11-28 Lothar Waßmannkaro: tx48: remove non-DT config
2013-11-28 Lothar Waßmannkaro: tx48: use optimized NAND timing
2013-11-28 Lothar Waßmannkaro: tx48: enable GPMC prefetch engine
2013-11-28 Lothar Waßmannmtd: nand: omap_gpmc: implement GPMC prefetch engine...
2013-11-28 Lothar Waßmannmtd: nand: omap_gpmc: misc cleanups
2013-11-28 Lothar Waßmannarm: am33xx: remove obsolete include file asm/arch...
2013-11-22 Lothar Waßmannkaro: tx48: update video_mode handling
2013-11-22 Lothar Waßmannkaro: tx48: update Copyright notice
2013-11-21 Lothar Waßmannkaro: tx6u: fix definition and setup of UART1 SEL_INPUT... KARO-TX6-2013-11-21
2013-11-21 Lothar Waßmannkaro: fdt: check for <CTRL-C> only to abort loading DTB
2013-11-21 Lothar Waßmannnet: bootme: use is_valid_ether_addr()/is_zero_ether_ad...
2013-11-21 Lothar Waßmannnet: bootme: re-add eth_init() call when eth not active
2013-11-21 Lothar Waßmanncommon: bootce: add missing call to ce_prepare_run_bin...
2013-11-21 Lothar Waßmannkaro: tx6: check for <CTRL-C> only to abort certain...
2013-11-21 Lothar Waßmannkaro: tx6: set IO voltage depending on HW rev of TX6
2013-11-21 Lothar Waßmannmx6: add fuse bank5 definitions
2013-11-19 Lothar Waßmannkaro: fdt: print error messages instead of numbers
2013-11-19 Lothar Waßmannkaro: fdt: set fdtsize to 0 before loading DTB
2013-11-19 Lothar Waßmannkaro: fdt: use setenv_hex() to set fdtsize variable
2013-11-19 Lothar Waßmannkaro: fdt: make karo_fdt_load_dtb() an internal functio...
2013-11-19 Lothar Waßmannkaro: fdt: improve display fdt path handling
2013-11-19 Lothar Waßmannkaro: tx6: romupdate: search a contiguous flash region...
2013-11-19 Lothar Waßmannkaro: tx6: Add missing GPL header
2013-11-08 Lothar Waßmannkaro: tx6: changed module suffix from -.xx. to -.x1... KARO-TX-2013-11-08
2013-11-08 Lothar Waßmannkaro: prevent video_mode variable from being clobbered...
2013-11-05 Lothar Waßmanndoc: KARO: update FDT handling description
2013-11-05 Lothar Waßmannkaro: tx53: setup PMIC to use BURST mode for better...
2013-11-04 Lothar Waßmannkaro: add 'fdtsave' command to default env
2013-11-04 Lothar Waßmannkaro: remove video parameter from default_bootargs
2013-11-04 Lothar Waßmannkaro: tx6: cleanup config file
2013-11-04 Lothar Waßmannkaro: tx6: set I2C speed to 400kHz
2013-11-04 Lothar Waßmannkaro: tx6: setup PMIC to use BURST mode for better...
2013-11-04 Lothar WaßmannRemove a bogus bit set in MAPSR
2013-10-28 Lothar Waßmannfdt: karo: add support for LVDS selection via 'video_mode'
2013-10-25 Lothar Waßmanndts: karo: remove embedded FDT KARO-TX-2013-10-25
2013-10-25 Lothar Waßmanndts: tx28: use karo_fdt_fixup_flexcan()
2013-10-25 Lothar WaßmannMerge branch 'karo-tx-merge'
2013-10-25 Lothar Waßmannfdt: update 'fdtsize' env variable when resizing FDT
2013-10-25 Lothar Waßmannkaro: tx48: update video mode handling
2013-10-25 Lothar Waßmannkaro: whitespace cleanup
2013-10-24 Lothar Waßmannkaro: tx48: read MAC address from fuses in board_late_i...
2013-10-24 Lothar Waßmannkaro: tx51: read MAC address from fuses in board_late_i...
2013-10-24 Lothar Waßmannkaro: tx51: remove debug message showing display parameters
2013-10-24 Lothar Waßmannkaro: tx53: read MAC address from fuses in board_late_i...
2013-10-24 Lothar Waßmannkaro: tx28s: make FEC1 init solely dependant on DT
2013-10-24 Lothar Waßmannkaro: tx28s: print message if fecmxc_initialize() fails
2013-10-24 Lothar Waßmannkaro: tx28: read MAC address from ocotp in board_late_i...
2013-10-24 Lothar Waßmannkaro: tx28: print MAC address from OCOTP
2013-10-24 Lothar Waßmannkaro: common: check pointer returned by fdt_getprop...
2013-10-24 Lothar Waßmannmxs: add delay after enabling ENET PLL
2013-10-24 Lothar Waßmannkaro: tx28: enable PHYLIB support
2013-10-21 Lothar Waßmannkaro: tx53: fix initialization of panel_info
2013-10-21 Lothar Waßmannkaro: tx6: fix initialization of panel_info
2013-10-21 Lothar Waßmannkaro: tx53: use global karo_fdt_fixup_flexcan()
2013-10-21 Lothar Waßmannkaro: fdt: convert tx6qdl_fixup_flexcan() to global...
2013-10-21 Lothar Waßmannkaro: fdt: disable the 'display' node rather than its...
2013-10-21 Lothar Waßmannarm: imx5: remove bogus #if
2013-10-21 Lothar Waßmannimx5: fix IPU_SOC_BASE_ADDR and remove unused IPU_SOC_O...
2013-10-21 Lothar Waßmannvideo: lcd: prevent crash when using bmp or splashimage...
2013-10-21 Lothar Waßmannimx6: iomux: remove use of NO_PAD_CTRL
2013-10-21 Lothar Waßmanni.MX video: move ipuv3_fb_shutdown() to where it is...
2013-10-21 Lothar WaßmannMerge branch 'tx28-bugfix' into karo-tx-merge
2013-10-21 Lothar Waßmannkaro: tx28: set variable 'videomode' to convey video...
2013-10-21 Lothar Waßmannkaro: tx28: add missing init of panel_info
2013-10-21 Lothar WaßmannMerge branch 'tx51-bugfix' into karo-tx-merge
2013-10-21 Lothar WaßmannMerge branch 'tx53-bugfix' into karo-tx-merge
2013-10-21 Lothar WaßmannMerge branch 'tx48-bugfix' into karo-tx-merge
2013-10-21 Lothar Waßmannkaro: tx53: update video mode handling code
2013-10-21 Lothar Waßmannkaro: tx53: remove useless #if
2013-10-21 Lothar Waßmannkaro: tx53: fix GPL license text
2013-10-21 Lothar Waßmannkaro: tx51: update video mode handling code
2013-10-21 Lothar Waßmannkaro: tx51: set 'max_bus_width' for ESDHC
2013-10-21 Lothar Waßmannkaro: tx51: add pad config with pullup to GPIO pins
2013-10-21 Lothar Waßmannkaro: tx51: remove CCGR setup from DCD
next