karo-tx-uboot.git
2014-09-09 Fabio Estevamnet: fec_mxc: Poll FEC_TBD_READY after polling TDAR
2014-09-09 Fabio Estevamnet: fec_mxc: Adjust RX DMA alignment for mx6solox
2014-09-09 Albert ARIBAUDMerge branch 'u-boot-sunxi/master' into 'u-boot-arm...
2014-09-08 Albert ARIBAUDMerge branch 'u-boot-samsung/master' into 'u-boot-arm...
2014-09-05 Ajay KumarCONFIGS: peach-pit: Enable display for peach_pit board
2014-09-05 Ajay KumarARM: exynos: peach_pit: Add DT nodes for fimd and parad...
2014-09-05 Ajay Kumarexynos5420: add callbacks needed for exynos_fb driver
2014-09-05 Ajay KumarARM: exynos: Add missing declaration for gpio_direction...
2014-09-05 Vadim Bendeburyvideo: Add driver for Parade PS8625 dP to LVDS bridge
2014-09-05 Ajay Kumarvideo: exynos_fimd: Add framework to disable FIMD sysmmu
2014-09-05 Ajay Kumararm: exynos: Add get_lcd_clk and set_lcd_clk callbacks...
2014-09-05 Ajay Kumararm: exynos: Add RPLL for Exynos5420
2014-09-05 Ajay Kumarexynos_fb: Remove usage of static defines
2014-09-05 FUKAUMI Naokisun7i: Add support for Olimex A20-OLinuXino-LIME
2014-09-05 Ian Campbellsunxi: Correct typo CONFIG_FTDFILE => CONFIG_FDTFILE
2014-09-05 Masahiro Yamadakconfig: remove redundant "SPL" from CONFIG_SYS_EXTRA_O...
2014-09-05 Przemyslaw... odroid: set MPLL clock to 880MHz
2014-09-05 Masahiro YamadaMAINTAINERS: update the maintainer of Arndale board
2014-09-05 Przemyslaw... odroid: kconfig: add odroid_defconfig
2014-09-05 Przemyslaw... odroid: add odroid U3/X2 device tree description
2014-09-05 Przemyslaw... odroid: add board file for Odroid X2/U3 based on Samsun...
2014-09-05 Przemyslaw... samsung: misc: use board specific functions to set...
2014-09-05 Przemyslaw... samsung: board: enable support of multiple board types
2014-09-05 Przemyslaw... arm:reset: call the reset_misc() before the cpu reset
2014-09-05 Przemyslaw... samsung:board: misc_init_r: call set_dfu_alt_info()
2014-09-05 Przemyslaw... samsung: misc: add function for setting $dfu_alt_info
2014-09-05 Przemyslaw... board:samsung: check the boot device and init the right...
2014-09-05 Przemyslaw... arch:exynos: boot mode: add get_boot_mode(), code cleanup
2014-09-05 Przemyslaw... exynos: pinmux: fix the gpio names for exynos4x12 mmc
2014-09-05 Przemyslaw... samsung: misc: fix soc revision setting in the set_boar...
2014-09-04 R SricharanARM: DRA72: DDR3: Add emif settings for 666MHz clock
2014-09-04 Enric Balletbo... AM335x: igep0033: Convert to generic board and use...
2014-09-04 Rostislav Lisovymtd: nand: omap_gpmc: Fix 'bit-flip' errors
2014-09-04 Rostislav Lisovymtd: nand: omap_gpmc: Enable multiple NAND flash devices
2014-09-04 Khoronzhuk... mtd: nand: davinci_nand: correct keystone RBL layout...
2014-09-04 Masahiro Yamadaarm: am335x: add Kconfig range attribute to prevent...
2014-09-04 Khoronzhuk... keystone2: use readl/writel functions instead of redefi...
2014-09-04 Guillaume GARDETomap3_beagle: Add boot script support to omap3 beagle...
2014-09-04 Khoronzhuk... ARM: keystone: clock: use correct BWADJ field mask...
2014-09-02 Tom RiniPrepare v2014.10-rc2
2014-09-02 Tom RiniMerge git://git.denx.de/u-boot-usb
2014-09-02 Tom RiniMerge branch 'master' of git://git.denx.de/u-boot-arc
2014-09-02 Bo ShenUSB: gadget: s3c: get rid of debug compile warning
2014-09-02 Bo ShenUSB: gadget: atmel: get rid of debug compile warning
2014-09-02 Stephen Warrenusb: ci_udc: implement dfu_usb_get_reset
2014-09-02 Lukasz Majewskiudc: dfu: s3c_udc: Provide function to check if USB...
2014-09-02 Lukasz Majewskidfu: Provide means to find difference between dfu-util...
2014-09-02 Tom RiniMerge git://git.denx.de/u-boot-dm
2014-09-02 Vasili Galkampc5xxx: Add stub implementation of cache functions
2014-09-01 Simon Glassdm: sandbox: dts: Add a GPIO bank
2014-09-01 Simon Glassdm: gpio: Allow gpio command to adjust GPIOs that are...
2014-09-01 Simon Glassdm: gpio: Enhance gpio command to show only active...
2014-08-31 Masahiro Yamadamx6: tqma6: get board support back to Kconfig build...
2014-08-31 Tom RiniMerge branch 'master' of git://git.denx.de/u-boot-nios
2014-08-31 Masahiro Yamadanomadik: kconfig: move board select menu and common...
2014-08-31 Masahiro Yamadahighbank: kconfig: move common settings
2014-08-31 Masahiro Yamadaorion5x: kconfig: move board select menu and common...
2014-08-31 Masahiro Yamadakeystone: kconfig: move board select menu and common...
2014-08-31 Masahiro Yamadaomap5: kconfig: move board select menu and common settings
2014-08-31 Masahiro Yamadaomap4: kconfig: move board select menu and common settings
2014-08-31 Masahiro Yamadaomap3: kconfig: move board select menu and common settings
2014-08-31 Masahiro Yamadadavinci: kconfig: move board select menu and common...
2014-08-31 Masahiro Yamadaexynos: kconfig: move board select menu and common...
2014-08-31 Masahiro Yamadakirkwood: kconfig: refactor Kconfig and defconfig
2014-08-31 Masahiro Yamadaversatile: kconfig: move common settings
2014-08-31 Masahiro Yamadarmobile: kconfig: move board select menu and common...
2014-08-31 Masahiro Yamadategra: kconfig: move board select menu and common settings
2014-08-31 Masahiro Yamadazynq: kconfig: move board select menu and common settings
2014-08-30 Benoît Thébaudeauarm: Add missing .vectors section to linker scripts
2014-08-30 Holger Brunckarm/km: disable subpage write for km_kirkwood_pci and...
2014-08-30 Holger Brunckarm/kirkwood/nand: allow forced disabling for subpage...
2014-08-30 Tom Rinivexpress_aemv8a.h: Enable CONFIG_CMD_BOOTI and CONFIG_C...
2014-08-30 Tom Rinivexpress_aemv8a.h: Clean up the config
2014-08-30 Tom Rinicmd_bootm.c: Add 'booti' for ARM64 Linux kernel Images
2014-08-30 Tom Riniarm64: Correct passing of Linux kernel args
2014-08-30 Steve Raearm: convert Cygnus and NSP boards to Kconfig
2014-08-30 Scott Brandenarm: add Cygnus and NSP boards
2014-08-30 Scott Brandenarm: bcmnsp: Add bcmnsp u-architecture
2014-08-30 Scott Brandenarm: bcmcygnus: Add bcmcygnus u-architecture
2014-08-30 Scott Brandenarm: iproc: Initial commit of iproc architecture code
2014-08-30 Stefan Agnerarm: vf610: add NFC clock support
2014-08-30 Stefan Agnerarm: vf610: add NFC pin mux
2014-08-30 Masahiro YamadaMAINTAINERS: change the status of vexpress board to...
2014-08-30 Marek VasutARM: Fix overflow in MMU setup
2014-08-30 Steve Raearm: bcm281xx: add board with Ethernet capability
2014-08-30 Jiandong Zhengarm: bcm281xx: net: Add Ethernet Driver
2014-08-30 Jiandong Zhengarm: bcm281xx: Add Ethernet Clock support
2014-08-30 Andre PrzywaraARM: enable ARMv7 virt support for the Arndale board
2014-08-30 Sergey Kostanbaevarm: ep9315: Add .vectors section to lds and remove...
2014-08-30 Pavel Macheksocfpga: cleanup socfpga_dw_mmc
2014-08-30 Pavel Macheksocfpga: initialize designware ethernet
2014-08-30 Thomas Chounios2: rebase nios2-generic board to 3c120 reference...
2014-08-30 Thomas Chounios2: link to CONFIG_SYS_MONITOR_BASE and remove text_...
2014-08-30 Thomas Chouserial: move nios2-yanu.h into opencores_yanu driver
2014-08-30 Thomas Chounios2: move nios2.h to arch asm directory
2014-08-30 Thomas Chounios2: divide nios2-io.h into each specific drivers...
2014-08-30 Thomas Chounios2: remove epled driver
2014-08-29 Chin Liang Seesocfpga: Fix SOCFPGA build error for Altera dev kit
2014-08-29 Pavel Macheksocfpga: fix clock manager register definition
2014-08-29 Christian Riescharm: include config.h in arch/arm/lib/vectors.S
next