karo-tx-uboot.git
2014-08-08 Lothar Waßmannkaro: tx51: remove duplicate CONFIG_SYS_SDRAM_CLK defin...
2014-08-08 Lothar Waßmannkaro: tx51: fix ipu clock setting
2014-08-08 Lothar Waßmannarm: mx5: print some more clocks in the 'clock' command
2014-08-08 Lothar Waßmannkaro: tx51: use .error asm instruction to print error...
2014-08-08 Lothar Waßmannkaro: tx51: init pad settings for SDRAM and NAND
2014-07-18 Lothar WaßmannMerge branch 'tx48-rel' KARO-TX-2014-07-18
2014-07-18 Lothar Waßmannfdt: karo: improve handling of usbotg phy
2014-07-18 Lothar Waßmannfdt: karo: make 'otg_mode' setting case insensitive
2014-07-17 Lothar Waßmannkaro: tx53: remove a bogus wait for CON_ACK to clear
2014-07-10 Lothar Waßmannmxs: change setup of exception vt KARO-TX-2014-07-10
2014-07-02 Lothar Waßmannarm: use a different stack setup macro for swi (copied...
2014-07-02 Lothar Waßmannkaro: set CONFIG_ARCH_MISC_INIT, so the exception VT...
2014-07-02 Lothar Waßmannarm: adjust PC displayed in exception handlers to point...
2014-06-30 Lothar Waßmannboard: karo: add 'ftd resize' to 'fdtsave' command
2014-06-30 Lothar Waßmannboard: karo: enable CONFIG_FAT_WRITE for all modules
2014-06-30 Lothar Waßmannboard: karo: make vbus-supply property name depend...
2014-06-30 Lothar WaßmannMerge remote-tracking branch 'remotes/origin/tx48-mmc...
2014-06-30 Lothar WaßmannMerge remote-tracking branch 'remotes/origin/tx28-bugfix'
2014-06-30 Lothar WaßmannMerge remote-tracking branch 'remotes/origin/tx6-bugfix'
2014-06-26 Lothar Waßmannboard: tx48: add MMC init code
2014-06-26 Lothar Waßmannarm: am33xx: define cpu_mmc_init() as weak symbol
2014-06-26 Lothar Waßmannmmc: omap_hsmmc: improve timeout checks in wait loops
2014-06-26 Lothar Waßmannmmc: omap_hsmmc: cleanup code
2014-06-26 Lothar Waßmannarm: am33xx: fix definition of MMC register addresses...
2014-06-26 Lothar Waßmannarm: am335x: fix bogus #ifndef CONFIG_OMAP_MMC_DEV_0
2014-06-16 Lothar WaßmannMerge branch 'tx6-bugfix'
2014-06-16 Lothar Waßmannkaro: tx6: actually use 'skip' parameter in tx6_prog_ub...
2014-06-16 Lothar Waßmannkaro: tx28: actually use 'skip' parameter in tx28_prog_...
2014-06-04 Lothar Waßmannkaro: unify mtd partitioning across all TX modules... KARO-TX-2014-06-04
2014-06-04 Lothar Waßmannkaro: tx6: eliminate multiple evaluation of artithmetic...
2014-06-04 Lothar Waßmannpost: remove redundant include of autoconf.mk which...
2014-06-03 Lothar WaßmannMerge branch 'tx51-bugfix'
2014-06-02 Lothar Waßmannkaro: tx51: enable arm_bus clock
2014-05-30 Lothar Waßmannkaro: tx53: enable tmax2 clock to make ESDHC2 interface...
2014-05-16 Lothar Waßmannadd support for TX6U-8012 KARO-TX-2014-05-29
2014-05-14 Lothar Waßmanndoc: karo: added description of boot_mode variable
2014-05-14 Lothar Waßmanndoc: karo: added description of boot_mode variable
2014-05-14 Lothar Waßmanndoc: karo: added description for TX6Q-1020
2014-05-14 Lothar WaßmannMerge branch 'tx6q-1020-devel'
2014-05-14 Lothar WaßmannMerge branch 'tx28-bugfix'
2014-05-13 Lothar Waßmannarm: karo: tx6: reference mmc root device by UUID
2014-04-28 Lothar Waßmannkaro: tx6: increase dtb partition size to allow for... KARO-TX6-2014-04-28
2014-04-28 Lothar Waßmannkaro: tx6: remove bootcmd_nand and set boot_mode to...
2014-04-25 Lothar Waßmannkaro: tx6: remove obsolete write levelling code
2014-04-25 Lothar Waßmannkaro: tx6: Finalize support for TX6Q-1020
2014-04-25 Lothar Waßmannkaro: tx6: lowlevel_init: various fixes for DDR calibration
2014-04-25 Lothar Waßmannkaro: tx6-1020: set DDR voltage to 1.5V
2014-04-25 Lothar Waßmannkaro: tx6: use _LP voltage settings for low power mode...
2014-04-25 Lothar Waßmannkaro: tx6: lowlevel_init: simplify MXC_DCD_CMD_*()...
2014-04-15 Lothar Waßmannkaro: tx28: remove erroneous pad settings for LCD_HSYNC...
2014-04-09 Lothar WaßmannMerge remote-tracking branch 'remotes/tx6-devel/tx6... KARO-TX-2014-04-09
2014-04-09 Lothar WaßmannMerge remote-tracking branch 'remotes/tx53-devel/tx53...
2014-04-09 Lothar WaßmannMerge remote-tracking branch 'remotes/tx28-romupdate...
2014-04-09 Lothar Waßmannkaro: common: mmc: remove debug code
2014-04-09 Lothar Waßmannkaro: tx6: remove duplicate setup of LCD pads
2014-04-09 Lothar Waßmannkaro: tx6: romupdate: rework, so u-boot can be stored...
2014-04-09 Lothar Waßmannarm: mx5: clock: add support for changing CPU clock...
2014-04-09 Lothar Waßmannarm: mx5: clock: fix PLL_FREQ_MIN() calculation
2014-04-09 Lothar Waßmannarm: mx5: clock: improve accuracy of decode_pll()
2014-04-09 Lothar Waßmannarm: mx5: clock: adjust data types to avoid useless...
2014-04-09 Lothar Waßmannarm: mx5: add support for core voltage change when...
2014-04-09 Lothar Waßmannkaro: tx53: lowlevel_init: make sure ESDSCR[CON_REQ...
2014-04-09 Lothar Waßmannkaro: tx53: lowlevel_init: remove write calibration
2014-04-09 Lothar Waßmannkaro: tx53: lowlevel_init: simplify MXC_DCD_CMD_*(...
2014-04-09 Lothar Waßmannkaro: tx28: romupdate: rework, so u-boot can be stored...
2014-04-09 Lothar Waßmannkaro: common: fdt: print correct name of backlight...
2014-04-09 Lothar Waßmannkaro: common: fix nand partition loading when bad block...
2014-03-07 Lothar Waßmannkaro: fdt: remove 'vbus-supply' from usbotg node when... KARO-TX6-2014-03-07
2014-03-07 Lothar Waßmannkaro: tx6: romupdate: remove debug messages
2014-03-06 Lothar Waßmannkaro: configs: increase MAXARGS to 256
2014-03-06 Lothar Waßmannkaro: tx48: resize fdt in ft_board_setup()
2014-03-06 Lothar Waßmannkaro: fdt: stub out DTB+LVDS related functions for...
2014-03-06 Lothar Waßmannkaro: fdt: look for 'backlight' alias or '/backlight0...
2014-03-06 Lothar Waßmannkaro: fdt: remove property 'xceiver-supply' if no can...
2014-03-06 Lothar Waßmannkaro: move 'is_lvds()' to common/karo.h
2014-03-06 Lothar Waßmannkaro: tx53: disable LED on stk5-v5
2014-03-05 Lothar WaßmannMerge branch 'tx48-devel' into uboot-merge
2014-03-05 Lothar Waßmannkaro: tx6: add support for TX6-V2 (eMMC)
2014-03-05 Lothar WaßmannMerge branch 'tx6-devel' into uboot-merge
2014-03-05 Lothar WaßmannMerge branch 'tx53-devel' into uboot-merge
2014-03-05 Lothar WaßmannMerge branch 'tx51-devel' into uboot-merge
2014-03-05 Lothar WaßmannMerge branch 'tx28-devel' into uboot-merge
2014-03-05 Lothar WaßmannMerge branch 'karo-devel' into uboot-merge
2014-03-05 Lothar WaßmannMerge branch 'common-devel' into uboot-merge
2014-03-05 Lothar WaßmannMerge remote-tracking branch 'remotes/kc/wince-bugfix...
2014-03-05 Lothar WaßmannMerge branch 'backlight-polarity' into uboot-merge
2014-03-05 Lothar WaßmannMerge branch 'tx6-boot_mode' into uboot-merge
2014-03-05 Lothar WaßmannMerge branch 'config-cleanup' into uboot-merge
2014-03-05 Lothar Waßmannkaro: tx6: resize fdt in ft_board_setup()
2014-03-05 Lothar Waßmannkaro: tx51: fix unused variable 'ret' build error
2014-03-04 Lothar Waßmannkaro: tx6: add support for TX6-V2 (eMMC)
2014-03-04 Lothar Waßmannkaro: tx28: resize fdt in ft_board_setup()
2014-03-04 Lothar Waßmannkaro: tx51: resize fdt in ft_board_setup()
2014-02-28 Lothar Waßmannkaro: tx53: resize fdt in ft_board_setup()
2014-02-18 Lothar Waßmannkaro: tx53: config cleanup
2014-02-18 Lothar Waßmannkaro: tx51: update name of usbotg node for karo_fdt_fix...
2014-02-18 Lothar Waßmannkaro: tx51: cleanup cpu_clk handling code
2014-02-18 Lothar Waßmannkaro: tx51: cleanup ethernet init code
2014-02-18 Lothar Waßmannkaro: tx51: use had_ctrlc() instead of tstc() to decide...
2014-02-18 Lothar Waßmannkaro: tx51: cleanup board_mmc_init()
next