1 # eCos saved configuration
3 # ---- commands --------------------------------------------------------
4 # This section contains information about the savefile format.
5 # It should not be edited. Any modifications made to this section
6 # may make it impossible for the configuration tools to read
9 cdl_savefile_version 1;
10 cdl_savefile_command cdl_savefile_version {};
11 cdl_savefile_command cdl_savefile_command {};
12 cdl_savefile_command cdl_configuration { description hardware template package };
13 cdl_savefile_command cdl_package { value_source user_value wizard_value inferred_value };
14 cdl_savefile_command cdl_component { value_source user_value wizard_value inferred_value };
15 cdl_savefile_command cdl_option { value_source user_value wizard_value inferred_value };
16 cdl_savefile_command cdl_interface { value_source user_value wizard_value inferred_value };
18 # ---- toplevel --------------------------------------------------------
19 # This section defines the toplevel configuration object. The only
20 # values that can be changed are the name of the configuration and
21 # the description field. It is not possible to modify the target,
22 # the template or the set of packages simply by editing the lines
23 # below because these changes have wide-ranging effects. Instead
24 # the appropriate tools should be used to make such modifications.
26 cdl_configuration eCos {
29 # These fields should not be modified.
32 package -hardware CYGPKG_HAL_ARM current ;
33 package -hardware CYGPKG_HAL_ARM_MX53 current ;
34 package -hardware CYGPKG_HAL_ARM_TX53KARO current ;
35 package -template CYGPKG_HAL current ;
36 package -template CYGPKG_INFRA current ;
37 package -template CYGPKG_REDBOOT current ;
38 package -template CYGPKG_ISOINFRA current ;
39 package -template CYGPKG_LIBC_STRING current ;
40 package -template CYGPKG_CRC current ;
41 package -hardware CYGPKG_IO_ETH_DRIVERS current ;
42 package -hardware CYGPKG_DEVS_ETH_ARM_TX53 current ;
43 package -hardware CYGPKG_DEVS_ETH_FEC current ;
44 package -hardware CYGPKG_COMPRESS_ZLIB current ;
45 package -hardware CYGPKG_IO_FLASH current ;
46 package -hardware CYGPKG_DEVS_FLASH_ONMXC current ;
47 package -template CYGPKG_MEMALLOC current ;
48 package -template CYGPKG_DEVS_ETH_PHY current ;
49 package -template CYGPKG_LIBC_I18N current ;
50 package -template CYGPKG_LIBC_STDLIB current ;
51 package -template CYGPKG_ERROR current ;
52 package -hardware CYGPKG_DEVS_MXC_I2C current ;
53 package -hardware CYGPKG_DEVS_IMX_IPU current ;
56 # ---- conflicts -------------------------------------------------------
57 # There are no conflicts.
59 # ---- contents --------------------------------------------------------
62 # Global build options
63 # Global build options including control over
64 # compiler flags, linker flags and choice of toolchain.
66 cdl_component CYGBLD_GLOBAL_OPTIONS {
67 # There is no associated value.
69 # The following properties are affected by this value
73 # Global command prefix
74 # This option specifies the command prefix used when
75 # invoking the build tools.
77 cdl_option CYGBLD_GLOBAL_COMMAND_PREFIX {
79 user_value arm-cortexa8-linux-gnu
81 # Default value: arm-926ejs-linux-gnu
84 # Global compiler flags
85 # This option controls the global compiler flags which are used to
86 # compile all packages by default. Individual packages may define
87 # options which override these global flags.
89 cdl_option CYGBLD_GLOBAL_CFLAGS {
91 user_value "-march=armv7-a -mfpu=fpa -mabi=apcs-gnu -Wall -Wno-pointer-sign -Wpointer-arith -Wstrict-prototypes -Wno-inline -Wundef -O2 -g -ffunction-sections -fdata-sections -fno-exceptions -fvtable-gc -finit-priority -Werror -pipe"
92 # The inferred value should not be edited directly.
93 inferred_value "-mcpu=arm9 -mabi=apcs-gnu -Wall -Wno-pointer-sign -Wpointer-arith -Wstrict-prototypes -Winline -Wundef -O2 -ffunction-sections -fdata-sections -fno-exceptions -fvtable-gc -finit-priority -Werror -pipe"
95 # Default value: "-march=armv5 -mabi=apcs-gnu -Wall -Wno-pointer-sign -Wpointer-arith -Wstrict-prototypes -Winline -Wundef -O2 -ffunction-sections -fdata-sections -fno-exceptions -fvtable-gc -finit-priority -Werror -pipe"
96 # Requires: CYGBLD_INFRA_CFLAGS_WARNINGS_AS_ERRORS
97 # CYGBLD_INFRA_CFLAGS_WARNINGS_AS_ERRORS == 1
100 # The following properties are affected by this value
101 # option CYGBLD_INFRA_CFLAGS_WARNINGS_AS_ERRORS
102 # Requires: is_substr(CYGBLD_GLOBAL_CFLAGS, " -Werror")
103 # option CYGBLD_INFRA_CFLAGS_PIPE
104 # Requires: is_substr(CYGBLD_GLOBAL_CFLAGS, " -pipe")
107 # Global linker flags
108 # This option controls the global linker flags. Individual
109 # packages may define options which override these global flags.
111 cdl_option CYGBLD_GLOBAL_LDFLAGS {
113 # No user value, uncomment the following line to provide one.
114 # user_value "-Wl,--gc-sections -Wl,-static -O2 -nostdlib"
115 # value_source default
116 # Default value: "-Wl,--gc-sections -Wl,-static -O2 -nostdlib"
119 # Build common GDB stub ROM image
120 # Unless a target board has specific requirements to the
121 # stub implementation, it can use a simple common stub.
122 # This option, which gets enabled by platform HALs as
123 # appropriate, controls the building of the common stub.
125 cdl_option CYGBLD_BUILD_COMMON_GDB_STUBS {
127 # No user value, uncomment the following line to provide one.
129 # value_source default
131 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
132 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
137 # ISO C library string functions
139 # This package provides string functions specified by the
140 # ISO C standard - ISO/IEC 9899:1990.
142 cdl_package CYGPKG_LIBC_STRING {
143 # Packages cannot be added or removed, nor can their version be changed,
144 # simply by editing their value. Instead the appropriate configuration
145 # should be used to perform these actions.
147 # This value cannot be modified here.
149 # Current value: 1 current
150 # Requires: CYGBLD_ISO_STRING_LOCALE_FUNCS_HEADER == "<cyg/libc/string/string.h>"
151 # CYGBLD_ISO_STRING_LOCALE_FUNCS_HEADER == <cyg/libc/string/string.h>
153 # Requires: CYGBLD_ISO_STRING_MEMFUNCS_HEADER == "<cyg/libc/string/string.h>"
154 # CYGBLD_ISO_STRING_MEMFUNCS_HEADER == <cyg/libc/string/string.h>
156 # Requires: CYGBLD_ISO_STRING_STRFUNCS_HEADER == "<cyg/libc/string/string.h>"
157 # CYGBLD_ISO_STRING_STRFUNCS_HEADER == <cyg/libc/string/string.h>
159 # Requires: CYGBLD_ISO_STRTOK_R_HEADER == "<cyg/libc/string/string.h>"
160 # CYGBLD_ISO_STRTOK_R_HEADER == <cyg/libc/string/string.h>
162 # Requires: CYGPKG_ISOINFRA
163 # CYGPKG_ISOINFRA == current
168 # Inline versions of <string.h> functions
169 # This option chooses whether some of the
170 # particularly simple string functions from
171 # <string.h> are available as inline
172 # functions. This may improve performance, and as
173 # the functions are small, may even improve code
176 cdl_option CYGIMP_LIBC_STRING_INLINES {
178 # No user value, uncomment the following line to provide one.
180 # value_source default
184 # Optimize string functions for code size
185 # This option tries to reduce string function
186 # code size at the expense of execution speed. The
187 # same effect can be produced if the code is
188 # compiled with the -Os option to the compiler.
190 cdl_option CYGIMP_LIBC_STRING_PREFER_SMALL_TO_FAST {
192 # No user value, uncomment the following line to provide one.
194 # value_source default
198 # Provide BSD compatibility functions
199 # Enabling this option causes various compatibility functions
200 # commonly found in the BSD UNIX operating system to be included.
201 # These are functions such as bzero, bcmp, bcopy, bzero, strcasecmp,
202 # strncasecmp, index, rindex and swab.
204 cdl_option CYGFUN_LIBC_STRING_BSD_FUNCS {
206 # No user value, uncomment the following line to provide one.
208 # The inferred value should not be edited directly.
210 # value_source inferred
212 # Requires: CYGBLD_ISO_STRING_BSD_FUNCS_HEADER == "<cyg/libc/string/bsdstring.h>"
213 # CYGBLD_ISO_STRING_BSD_FUNCS_HEADER == <cyg/libc/string/bsdstring.h>
215 # Requires: CYGINT_ISO_CTYPE
216 # CYGINT_ISO_CTYPE == 1
221 # These options control the behaviour of the
222 # strtok() and strtok_r() string tokenization
225 cdl_component CYGPKG_LIBC_STRING_STRTOK {
226 # There is no associated value.
230 # Per-thread strtok()
231 # This option controls whether the string function
232 # strtok() has its state recorded on a per-thread
233 # basis rather than global. If this option is
234 # disabled, some per-thread space can be saved.
235 # Note there is also a POSIX-standard strtok_r()
236 # function to achieve a similar effect with user
237 # support. Enabling this option will use one slot
238 # of kernel per-thread data. You should ensure you
239 # have enough slots configured for all your
242 cdl_option CYGSEM_LIBC_STRING_PER_THREAD_STRTOK {
243 # This option is not active
244 # ActiveIf constraint: CYGPKG_KERNEL
245 # CYGPKG_KERNEL (unknown) == 0
249 # No user value, uncomment the following line to provide one.
251 # value_source default
252 # Default value: CYGVAR_KERNEL_THREADS_DATA
253 # CYGVAR_KERNEL_THREADS_DATA (unknown) == 0
255 # Requires: CYGVAR_KERNEL_THREADS_DATA
256 # CYGVAR_KERNEL_THREADS_DATA (unknown) == 0
261 # Trace verbosity level for debugging the <string.h>
262 # functions strtok() and strtok_r(). Increase this
263 # value to get additional trace output.
265 cdl_option CYGNUM_LIBC_STRING_STRTOK_TRACE_LEVEL {
267 # No user value, uncomment the following line to provide one.
269 # value_source default
271 # Legal values: 0 to 1
276 # This option indicates whether strdup() is to be supported.
278 cdl_option CYGFUN_LIBC_STRING_STRDUP {
279 # ActiveIf constraint: CYGINT_ISO_MALLOC
280 # CYGINT_ISO_MALLOC == 1
283 # Calculated value: 1
288 # C library string functions build options
289 # Package specific build options including control over
290 # compiler flags used only in building this package,
291 # and details of which tests are built.
293 cdl_component CYGPKG_LIBC_STRING_OPTIONS {
294 # There is no associated value.
298 # Additional compiler flags
299 # This option modifies the set of compiler flags for
300 # building the C library. These flags are used in addition
301 # to the set of global flags.
303 cdl_option CYGPKG_LIBC_STRING_CFLAGS_ADD {
305 # No user value, uncomment the following line to provide one.
306 # user_value "-fno-rtti -Woverloaded-virtual"
307 # value_source default
308 # Default value: "-fno-rtti -Woverloaded-virtual"
311 # Suppressed compiler flags
312 # This option modifies the set of compiler flags for
313 # building the C library. These flags are removed from
314 # the set of global flags if present.
316 cdl_option CYGPKG_LIBC_STRING_CFLAGS_REMOVE {
318 # No user value, uncomment the following line to provide one.
319 # user_value -Wno-pointer-sign
320 # value_source default
321 # Default value: -Wno-pointer-sign
324 # C library string function tests
325 # This option specifies the set of tests for the C library
328 cdl_option CYGPKG_LIBC_STRING_TESTS {
329 # Calculated value: "tests/memchr tests/memcmp1 tests/memcmp2 tests/memcpy1 tests/memcpy2 tests/memmove1 tests/memmove2 tests/memset tests/strcat1 tests/strcat2 tests/strchr tests/strcmp1 tests/strcmp2 tests/strcoll1 tests/strcoll2 tests/strcpy1 tests/strcpy2 tests/strcspn tests/strcspn tests/strlen tests/strncat1 tests/strncat2 tests/strncpy1 tests/strncpy2 tests/strpbrk tests/strrchr tests/strspn tests/strstr tests/strtok tests/strxfrm1 tests/strxfrm2"
331 # Current_value: tests/memchr tests/memcmp1 tests/memcmp2 tests/memcpy1 tests/memcpy2 tests/memmove1 tests/memmove2 tests/memset tests/strcat1 tests/strcat2 tests/strchr tests/strcmp1 tests/strcmp2 tests/strcoll1 tests/strcoll2 tests/strcpy1 tests/strcpy2 tests/strcspn tests/strcspn tests/strlen tests/strncat1 tests/strncat2 tests/strncpy1 tests/strncpy2 tests/strpbrk tests/strrchr tests/strspn tests/strstr tests/strtok tests/strxfrm1 tests/strxfrm2
336 # Common ethernet support
337 # doc: ref/io-eth-drv-generic.html
338 # Platform independent ethernet drivers
340 cdl_package CYGPKG_IO_ETH_DRIVERS {
341 # Packages cannot be added or removed, nor can their version be changed,
342 # simply by editing their value. Instead the appropriate configuration
343 # should be used to perform these actions.
345 # This value cannot be modified here.
347 # Current value: 1 current
349 # The following properties are affected by this value
350 # component CYGPKG_REDBOOT_NETWORKING
351 # ActiveIf: CYGPKG_IO_ETH_DRIVERS
352 # package CYGPKG_DEVS_ETH_ARM_TX53
353 # ActiveIf: CYGPKG_IO_ETH_DRIVERS
354 # package CYGPKG_DEVS_ETH_FEC
355 # ActiveIf: CYGPKG_IO_ETH_DRIVERS
356 # package CYGPKG_DEVS_ETH_PHY
357 # ActiveIf: CYGPKG_IO_ETH_DRIVERS
363 cdl_interface CYGHWR_NET_DRIVERS {
364 # Implemented by CYGPKG_DEVS_ETH_FEC, active, enabled
365 # This value cannot be modified here.
369 # The following properties are affected by this value
370 # option CYGDAT_REDBOOT_DEFAULT_NETWORK_DEVICE
371 # ActiveIf: CYGHWR_NET_DRIVERS > 1
372 # option CYGSEM_REDBOOT_NETWORK_INIT_ONE_DEVICE
373 # ActiveIf: CYGHWR_NET_DRIVERS > 1
376 # Driver supports multicast addressing
377 # This interface defines whether or not a driver can handle
378 # requests for multicast addressing.
380 cdl_interface CYGINT_IO_ETH_MULTICAST {
381 # Implemented by CYGPKG_DEVS_ETH_FEC, active, enabled
382 # This value cannot be modified here.
386 # The following properties are affected by this value
389 # Support printing driver debug information
390 # Selecting this option will include code to allow the driver to
391 # print lots of information on diagnostic output such as full
394 cdl_component CYGDBG_IO_ETH_DRIVERS_DEBUG {
396 # No user value, uncomment the following line to provide one.
398 # value_source default
403 # Driver debug output verbosity
404 # The value of this option indicates the default verbosity
405 # level of debugging output. 0 means no debugging output
406 # is made by default. Higher values indicate higher verbosity.
407 # The verbosity level may also be changed at run time by
408 # changing the variable cyg_io_eth_net_debug.
410 cdl_option CYGDBG_IO_ETH_DRIVERS_DEBUG_VERBOSITY {
412 # No user value, uncomment the following line to provide one.
414 # value_source default
419 # Size of scatter-gather I/O lists
420 # A scatter-gather list is used to pass requests to/from
421 # the physical device driver. This list can typically be
422 # small, as the data is normally already packed into reasonable
425 cdl_option CYGNUM_IO_ETH_DRIVERS_SG_LIST_SIZE {
427 # No user value, uncomment the following line to provide one.
429 # value_source default
433 # Support for standard eCos TCP/IP stack.
435 cdl_component CYGPKG_IO_ETH_DRIVERS_NET {
436 # This option is not active
437 # ActiveIf constraint: CYGPKG_NET
438 # CYGPKG_NET (unknown) == 0
442 # No user value, uncomment the following line to provide one.
444 # value_source default
446 # Requires: CYGINT_ISO_STRING_STRFUNCS
447 # CYGINT_ISO_STRING_STRFUNCS == 1
452 # Warn when there are no more mbufs
453 # Warnings about running out of mbufs are printed to the
454 # diagnostic output channel via diag_printf() if this option
455 # is enabled. Mbufs are the network stack's basic dynamic
456 # memory objects that hold all packets in transit; running
457 # out is bad for performance but not fatal, not a crash.
458 # You might want to turn off the warnings to preserve realtime
459 # properties of the system even in extremis.
461 cdl_component CYGPKG_IO_ETH_DRIVERS_WARN_NO_MBUFS {
462 # This option is not active
463 # The parent CYGPKG_IO_ETH_DRIVERS_NET is not active
466 # No user value, uncomment the following line to provide one.
468 # value_source default
472 # Simulate network failures for testing
473 # This package contains a suite of simulated failure modes
474 # for the ethernet device layer, including dropping and/or
475 # corrupting received packets, dropping packets queued for
476 # transmission, and simulating a complete network break.
477 # It requires the kernel as a source of time information.
479 cdl_component CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES {
480 # This option is not active
481 # The parent CYGPKG_IO_ETH_DRIVERS_NET is not active
484 # No user value, uncomment the following line to provide one.
486 # value_source default
491 # Drop incoming packets (percentage)
493 cdl_option CYGPKG_IO_ETH_DRIVERS_SIMULATE_DROP_RX {
494 # This option is not active
495 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is not active
496 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is disabled
499 # No user value, uncomment the following line to provide one.
501 # value_source default
502 # Default value: 1 10
503 # Legal values: 10 50 80
506 # Corrupt incoming packets (percentage)
508 cdl_option CYGPKG_IO_ETH_DRIVERS_SIMULATE_CORRUPT_RX {
509 # This option is not active
510 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is not active
511 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is disabled
514 # No user value, uncomment the following line to provide one.
516 # value_source default
517 # Default value: 1 10
518 # Legal values: 10 50 80
521 # Drop outgoing packets (percentage)
523 cdl_option CYGPKG_IO_ETH_DRIVERS_SIMULATE_DROP_TX {
524 # This option is not active
525 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is not active
526 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is disabled
529 # No user value, uncomment the following line to provide one.
531 # value_source default
532 # Default value: 1 10
533 # Legal values: 10 50 80
536 # Simulate a line cut from time to time
537 # This option causes the system to drop all packets for a
538 # short random period (10s of seconds), and then act
539 # normally for up to 4 times that long. This simulates your
540 # sysadmin fiddling with plugs in the network switch
543 cdl_option CYGPKG_IO_ETH_DRIVERS_SIMULATE_LINE_CUT {
544 # This option is not active
545 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is not active
546 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is disabled
549 # No user value, uncomment the following line to provide one.
551 # value_source default
557 # Support for stand-alone network stack.
559 cdl_component CYGPKG_IO_ETH_DRIVERS_STAND_ALONE {
560 # ActiveIf constraint: !CYGPKG_NET
561 # CYGPKG_NET (unknown) == 0
565 # No user value, uncomment the following line to provide one.
567 # value_source default
569 # Requires: CYGINT_ISO_STRING_MEMFUNCS
570 # CYGINT_ISO_STRING_MEMFUNCS == 1
575 # Pass packets to an alternate stack
576 # Define this to allow packets seen by this layer to be
577 # passed on to the previous logical layer, i.e. when
578 # stand-alone processing replaces system (eCos) processing.
580 cdl_option CYGSEM_IO_ETH_DRIVERS_PASS_PACKETS {
582 # No user value, uncomment the following line to provide one.
584 # value_source default
585 # Default value: 0 != CYGPKG_REDBOOT_NETWORKING
586 # CYGPKG_REDBOOT_NETWORKING == 1
590 # Number of [network] buffers
591 # This option is used to allocate space to buffer incoming network
592 # packets. These buffers are used to hold data until they can be
593 # logically processed by higher layers.
595 cdl_option CYGNUM_IO_ETH_DRIVERS_NUM_PKT {
597 # No user value, uncomment the following line to provide one.
599 # value_source default
601 # Legal values: 2 to 32
604 # Show driver warnings
605 # Selecting this option will allows the stand-alone ethernet driver
606 # to display warnings on the system console when incoming network
607 # packets are being discarded due to lack of buffer space.
609 cdl_option CYGSEM_IO_ETH_DRIVERS_WARN {
610 # ActiveIf constraint: CYGPKG_REDBOOT
611 # CYGPKG_REDBOOT == current
615 # No user value, uncomment the following line to provide one.
617 # value_source default
622 # Support for lwIP network stack.
624 cdl_component CYGPKG_IO_ETH_DRIVERS_LWIP {
625 # This option is not active
626 # ActiveIf constraint: CYGPKG_NET_LWIP
627 # CYGPKG_NET_LWIP (unknown) == 0
631 # No user value, uncomment the following line to provide one.
633 # value_source default
635 # Requires: !CYGPKG_NET
636 # CYGPKG_NET (unknown) == 0
640 # Interrupt support required
641 # This interface is used to indicate to the low
642 # level device drivers that interrupt driven operation
643 # is required by higher layers.
645 cdl_interface CYGINT_IO_ETH_INT_SUPPORT_REQUIRED {
646 # Implemented by CYGPKG_IO_ETH_DRIVERS_NET, inactive, enabled
647 # Implemented by CYGPKG_IO_ETH_DRIVERS_LWIP, inactive, enabled
648 # This value cannot be modified here.
652 # The following properties are affected by this value
655 # Common ethernet support build options
657 cdl_component CYGPKG_IO_ETH_DRIVERS_OPTIONS {
658 # There is no associated value.
662 # Additional compiler flags
663 # This option modifies the set of compiler flags for
664 # building the common ethernet support package. These flags are used in addition
665 # to the set of global flags.
667 cdl_option CYGPKG_IO_ETH_DRIVERS_CFLAGS_ADD {
669 # No user value, uncomment the following line to provide one.
670 # user_value "-D_KERNEL -D__ECOS"
671 # value_source default
672 # Default value: "-D_KERNEL -D__ECOS"
676 # Ethernet driver for Ka-Ro electronics TX53 processor module
678 cdl_package CYGPKG_DEVS_ETH_ARM_TX53 {
679 # Packages cannot be added or removed, nor can their version be changed,
680 # simply by editing their value. Instead the appropriate configuration
681 # should be used to perform these actions.
683 # ActiveIf constraint: CYGPKG_IO_ETH_DRIVERS
684 # CYGPKG_IO_ETH_DRIVERS == current
687 # This value cannot be modified here.
689 # Current value: 1 current
693 # FEC ethernet driver required
695 cdl_interface CYGINT_DEVS_ETH_FEC_REQUIRED {
696 # Implemented by CYGPKG_DEVS_ETH_ARM_MXCBOARD_ETH0, active, enabled
697 # This value cannot be modified here.
701 # The following properties are affected by this value
702 # package CYGPKG_DEVS_ETH_FEC
703 # ActiveIf: CYGINT_DEVS_ETH_FEC_REQUIRED
706 # Ka-Ro TX53 ethernet port driver
707 # This option includes the ethernet device driver for the
710 cdl_component CYGPKG_DEVS_ETH_ARM_MXCBOARD_ETH0 {
712 # No user value, uncomment the following line to provide one.
714 # value_source default
716 # Requires: CYGSEM_REDBOOT_PLF_ESA_VALIDATE
717 # CYGSEM_REDBOOT_PLF_ESA_VALIDATE == 1
719 # Requires: CYGHWR_DEVS_ETH_PHY_LAN8700
720 # CYGHWR_DEVS_ETH_PHY_LAN8700 == 1
725 # Device name for the ETH0 ethernet driver
726 # This option sets the name of the ethernet device.
728 cdl_option CYGDAT_DEVS_ETH_ARM_MXCBOARD_ETH0_NAME {
730 # No user value, uncomment the following line to provide one.
731 # user_value "\"eth0\""
732 # value_source default
733 # Default value: "\"eth0\""
736 # OUI part of MAC address
737 # This option sets OUI part (manufacturer ID) of the MAC address
740 cdl_option CYGDAT_DEVS_ETH_ARM_TX53KARO_OUI {
741 # ActiveIf constraint: CYGSEM_REDBOOT_PLF_ESA_VALIDATE
742 # CYGSEM_REDBOOT_PLF_ESA_VALIDATE == 1
746 # No user value, uncomment the following line to provide one.
747 # user_value "{ 0x00, 0x0c, 0xc6 }"
748 # value_source default
749 # Default value: "{ 0x00, 0x0c, 0xc6 }"
754 # Driver for fast ethernet controller.
755 # Driver for fast ethernet controller.
757 cdl_package CYGPKG_DEVS_ETH_FEC {
758 # Packages cannot be added or removed, nor can their version be changed,
759 # simply by editing their value. Instead the appropriate configuration
760 # should be used to perform these actions.
762 # ActiveIf constraint: CYGPKG_IO_ETH_DRIVERS
763 # CYGPKG_IO_ETH_DRIVERS == current
765 # ActiveIf constraint: CYGINT_DEVS_ETH_FEC_REQUIRED
766 # CYGINT_DEVS_ETH_FEC_REQUIRED == 1
769 # This value cannot be modified here.
771 # Current value: 1 current
775 # MXC FEC ethernet driver build options
777 cdl_component CYGPKG_DEVS_ETH_FEC_OPTIONS {
778 # There is no associated value.
782 # Additional compiler flags
783 # This option modifies the set of compiler flags for
784 # building the Cirrus Logic ethernet driver package.
785 # These flags are used in addition
786 # to the set of global flags.
788 cdl_option CYGPKG_DEVS_ETH_FEC_CFLAGS_ADD {
790 # No user value, uncomment the following line to provide one.
791 # user_value "-D_KERNEL -D__ECOS"
792 # value_source default
793 # Default value: "-D_KERNEL -D__ECOS"
797 # MXC FEC MII Gasket for RMII mode
798 # This option enables the use of the MII Gasket for
799 # RMII mode found in i.MX25 and i.MX53 processors.
801 cdl_option CYGOPT_HAL_ARM_MXC_FEC_MIIGSK {
802 # ActiveIf constraint: CYGPKG_HAL_ARM_MX25 || CYGPKG_HAL_ARM_MX53
803 # CYGPKG_HAL_ARM_MX25 (unknown) == 0
804 # CYGPKG_HAL_ARM_MX53 == current
808 # No user value, uncomment the following line to provide one.
810 # value_source default
815 # Ethernet transceiver (PHY) support
816 # API for ethernet PHY devices
818 cdl_package CYGPKG_DEVS_ETH_PHY {
819 # Packages cannot be added or removed, nor can their version be changed,
820 # simply by editing their value. Instead the appropriate configuration
821 # should be used to perform these actions.
823 # ActiveIf constraint: CYGPKG_IO_ETH_DRIVERS
824 # CYGPKG_IO_ETH_DRIVERS == current
827 # This value cannot be modified here.
829 # Current value: 1 current
830 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT
831 # CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT == 1
836 # Enable driver debugging
837 # Enables the diagnostic debug messages on the
840 cdl_option CYGDBG_DEVS_ETH_PHY {
842 # No user value, uncomment the following line to provide one.
844 # value_source default
848 # Time period (seconds) to wait for auto-negotiation
849 # The length of time to wait for auto-negotiation to complete
850 # before giving up and declaring the link dead/missing.
852 cdl_option CYGINT_DEVS_ETH_PHY_AUTO_NEGOTIATION_TIME {
854 # No user value, uncomment the following line to provide one.
856 # value_source default
861 # Include support for National Semiconductor DP83847 DsPHYTER II
863 cdl_option CYGHWR_DEVS_ETH_PHY_DP83847 {
865 # No user value, uncomment the following line to provide one.
867 # value_source default
872 # Include support for AMD 79C874 NetPHY
874 cdl_option CYGHWR_DEVS_ETH_PHY_AM79C874 {
876 # No user value, uncomment the following line to provide one.
878 # value_source default
883 # Include support for Intel LXT972xxx PHY
885 cdl_option CYGHWR_DEVS_ETH_PHY_INLXT972 {
887 # No user value, uncomment the following line to provide one.
889 # value_source default
894 # Include support for ICS 1890 PHY
896 cdl_option CYGHWR_DEVS_ETH_PHY_ICS1890 {
898 # No user value, uncomment the following line to provide one.
900 # value_source default
905 # Include support for ICS 1892 PHY
907 cdl_option CYGHWR_DEVS_ETH_PHY_ICS1892 {
909 # No user value, uncomment the following line to provide one.
911 # value_source default
916 # Include support for ICS 1893 and 1893AF PHY
918 cdl_option CYGHWR_DEVS_ETH_PHY_ICS1893 {
920 # No user value, uncomment the following line to provide one.
922 # value_source default
927 # Include support for the Davicom DM9161A PHY
929 cdl_option CYGHWR_DEVS_ETH_PHY_DM9161A {
931 # No user value, uncomment the following line to provide one.
933 # value_source default
938 # Include support for the Micrel KS8721 PHY
940 cdl_option CYGHWR_DEVS_ETH_PHY_KS8721 {
942 # No user value, uncomment the following line to provide one.
944 # value_source default
949 # Include support for SMSC LAN8700 NetPHY
951 cdl_option CYGHWR_DEVS_ETH_PHY_LAN8700 {
953 # No user value, uncomment the following line to provide one.
955 # The inferred value should not be edited directly.
957 # value_source inferred
960 # The following properties are affected by this value
961 # component CYGPKG_DEVS_ETH_ARM_MXCBOARD_ETH0
962 # Requires: CYGHWR_DEVS_ETH_PHY_LAN8700
967 # ISO C library internationalization functions
969 # This package provides internationalization functions specified by the
970 # ISO C standard - ISO/IEC 9899:1990. These include locale-related
971 # functionality and <ctype.h> functionality.
973 cdl_package CYGPKG_LIBC_I18N {
974 # Packages cannot be added or removed, nor can their version be changed,
975 # simply by editing their value. Instead the appropriate configuration
976 # should be used to perform these actions.
978 # This value cannot be modified here.
980 # Current value: 1 current
981 # Requires: CYGPKG_ISOINFRA
982 # CYGPKG_ISOINFRA == current
988 # These options determine which locales other than the "C" locale
989 # are supported and hence contribute to the size of the executable.
991 cdl_component CYGPKG_LIBC_I18N_LOCALES {
992 # There is no associated value.
996 # Support for multiple locales required
998 cdl_interface CYGINT_LIBC_I18N_MB_REQUIRED {
999 # Implemented by CYGFUN_LIBC_I18N_LOCALE_C_SJIS, active, disabled
1000 # Implemented by CYGFUN_LIBC_I18N_LOCALE_C_JIS, active, disabled
1001 # Implemented by CYGFUN_LIBC_I18N_LOCALE_C_EUCJP, active, disabled
1002 # This value cannot be modified here.
1004 # Current value: 0 0
1005 # Requires: CYGBLD_ISO_STDLIB_MB_CUR_MAX_HEADER == "<cyg/libc/i18n/mb.h>"
1006 # CYGBLD_ISO_STDLIB_MB_CUR_MAX_HEADER == 0
1009 # The following properties are affected by this value
1012 # C-SJIS locale support
1013 # This option controls if the "C-SJIS" locale will be
1014 # supported by setlocale(). The locale is a hybrid locale
1015 # that is mostly the "C" locale with Japanese SJIS multibyte
1018 cdl_option CYGFUN_LIBC_I18N_LOCALE_C_SJIS {
1020 # No user value, uncomment the following line to provide one.
1022 # value_source default
1025 # The following properties are affected by this value
1026 # option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE
1027 # LegalValues: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2))) to 0x7fffffff
1028 # option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE
1029 # DefaultValue: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2)))
1032 # C-JIS locale support
1033 # This option controls if the "C-JIS" locale will be
1034 # supported by setlocale(). The locale is a hybrid locale
1035 # that is mostly the "C" locale with Japanese JIS multibyte
1038 cdl_option CYGFUN_LIBC_I18N_LOCALE_C_JIS {
1040 # No user value, uncomment the following line to provide one.
1042 # value_source default
1045 # The following properties are affected by this value
1046 # option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE
1047 # LegalValues: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2))) to 0x7fffffff
1048 # option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE
1049 # DefaultValue: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2)))
1052 # C-EUCJP locale support
1053 # This option controls if the "C-EUCJP" locale will be
1054 # supported by setlocale(). The locale is a hybrid locale
1055 # that is mostly the "C" locale with Japanese EUCJP multibyte
1058 cdl_option CYGFUN_LIBC_I18N_LOCALE_C_EUCJP {
1060 # No user value, uncomment the following line to provide one.
1062 # value_source default
1065 # The following properties are affected by this value
1066 # option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE
1067 # LegalValues: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2))) to 0x7fffffff
1068 # option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE
1069 # DefaultValue: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2)))
1073 # Newlib's ctype implementation
1074 # This option enables the implementation of the ctype functions
1075 # that comes with newlib. It is table driven and therefore
1076 # exhibits different performance characteristics. It also offers
1077 # a limited amount of binary compatibility
1078 # with newlib so that programs linked against newlib ctype/locale
1079 # do not need to be recompiled when linked with eCos.
1081 cdl_option CYGPKG_LIBC_I18N_NEWLIB_CTYPE {
1083 # No user value, uncomment the following line to provide one.
1085 # value_source default
1087 # Requires: CYGBLD_ISO_CTYPE_HEADER == "<cyg/libc/i18n/newlibctype.h>"
1088 # CYGBLD_ISO_CTYPE_HEADER == <cyg/libc/i18n/ctype.inl>
1092 # Per-thread multibyte state
1093 # This option controls whether the multibyte character
1094 # handling functions mblen(), mbtowc(), and wctomb(),
1095 # have their state recorded on a per-thread
1096 # basis rather than global. If this option is
1097 # disabled, some per-thread space can be saved.
1098 # Enabling this option will use three slots
1099 # of kernel per-thread data. You should ensure you
1100 # have enough slots configured for all your
1103 cdl_option CYGSEM_LIBC_I18N_PER_THREAD_MB {
1104 # This option is not active
1105 # ActiveIf constraint: CYGPKG_KERNEL
1106 # CYGPKG_KERNEL (unknown) == 0
1110 # No user value, uncomment the following line to provide one.
1112 # value_source default
1113 # Default value: CYGVAR_KERNEL_THREADS_DATA != 0
1114 # CYGVAR_KERNEL_THREADS_DATA (unknown) == 0
1116 # Requires: CYGVAR_KERNEL_THREADS_DATA
1117 # CYGVAR_KERNEL_THREADS_DATA (unknown) == 0
1121 # Size of locale name strings
1122 # This option controls the maximum size of
1123 # locale names and is used, among other things
1124 # to instantiate a static string used
1125 # as a return value from the
1126 # setlocale() function. When requesting the
1127 # current locale settings with LC_ALL, a string
1128 # must be constructed to contain this data, rather
1129 # than just returning a constant string. This
1130 # string data is stored in the static string.
1131 # This depends on the length of locale names,
1132 # hence this option. If just the C locale is
1133 # present, this option can be set as low as 2.
1135 cdl_option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE {
1137 # No user value, uncomment the following line to provide one.
1139 # value_source default
1140 # Default value: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2)))
1141 # CYGFUN_LIBC_I18N_LOCALE_C_EUCJP == 0
1142 # CYGFUN_LIBC_I18N_LOCALE_C_SJIS == 0
1143 # CYGFUN_LIBC_I18N_LOCALE_C_JIS == 0
1145 # Legal values: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2))) to 0x7fffffff
1146 # CYGFUN_LIBC_I18N_LOCALE_C_EUCJP == 0
1147 # CYGFUN_LIBC_I18N_LOCALE_C_SJIS == 0
1148 # CYGFUN_LIBC_I18N_LOCALE_C_JIS == 0
1151 # Inline versions of <ctype.h> functions
1152 # This option chooses whether the simple character
1153 # classification and conversion functions (e.g.
1154 # isupper(), isalpha(), toupper(), etc.)
1155 # from <ctype.h> are available as inline
1156 # functions. This may improve performance and as
1157 # the functions are small, may even improve code
1160 cdl_option CYGIMP_LIBC_I18N_CTYPE_INLINES {
1162 # No user value, uncomment the following line to provide one.
1164 # value_source default
1166 # Requires: CYGBLD_ISO_CTYPE_HEADER == "<cyg/libc/i18n/ctype.inl>"
1167 # CYGBLD_ISO_CTYPE_HEADER == <cyg/libc/i18n/ctype.inl>
1171 # C library i18n functions build options
1172 # Package specific build options including control over
1173 # compiler flags used only in building this package,
1174 # and details of which tests are built.
1176 cdl_component CYGPKG_LIBC_I18N_OPTIONS {
1177 # There is no associated value.
1181 # Additional compiler flags
1182 # This option modifies the set of compiler flags for
1183 # building the C library. These flags are used in addition
1184 # to the set of global flags.
1186 cdl_option CYGPKG_LIBC_I18N_CFLAGS_ADD {
1188 # No user value, uncomment the following line to provide one.
1189 # user_value "-fno-rtti -Woverloaded-virtual"
1190 # value_source default
1191 # Default value: "-fno-rtti -Woverloaded-virtual"
1194 # Suppressed compiler flags
1195 # This option modifies the set of compiler flags for
1196 # building the C library. These flags are removed from
1197 # the set of global flags if present.
1199 cdl_option CYGPKG_LIBC_I18N_CFLAGS_REMOVE {
1201 # No user value, uncomment the following line to provide one.
1202 # user_value -Wno-pointer-sign
1203 # value_source default
1204 # Default value: -Wno-pointer-sign
1207 # C library i18n function tests
1208 # This option specifies the set of tests for the C library
1211 cdl_option CYGPKG_LIBC_I18N_TESTS {
1212 # Calculated value: "tests/ctype tests/setlocale tests/i18nmb"
1214 # Current_value: tests/ctype tests/setlocale tests/i18nmb
1219 # ISO C library general utility functions
1220 # doc: ref/libc.html
1221 # This package provides general utility functions in <stdlib.h>
1222 # as specified by the ISO C standard - ISO/IEC 9899:1990.
1224 cdl_package CYGPKG_LIBC_STDLIB {
1225 # Packages cannot be added or removed, nor can their version be changed,
1226 # simply by editing their value. Instead the appropriate configuration
1227 # should be used to perform these actions.
1229 # This value cannot be modified here.
1231 # Current value: 1 current
1232 # Requires: CYGPKG_ISOINFRA
1233 # CYGPKG_ISOINFRA == current
1235 # Requires: CYGINT_ISO_CTYPE
1236 # CYGINT_ISO_CTYPE == 1
1238 # Requires: CYGINT_ISO_STRING_STRFUNCS
1239 # CYGINT_ISO_STRING_STRFUNCS == 1
1244 # Inline versions of <stdlib.h> functions
1245 # This option chooses whether some of the
1246 # particularly simple standard utility functions
1247 # from <stdlib.h> are available as inline
1248 # functions. This may improve performance, and as
1249 # the functions are small, may even improve code
1252 cdl_component CYGIMP_LIBC_STDLIB_INLINES {
1253 # There is no associated value.
1259 cdl_option CYGIMP_LIBC_STDLIB_INLINE_ABS {
1261 # No user value, uncomment the following line to provide one.
1263 # value_source default
1265 # Requires: CYGBLD_ISO_STDLIB_ABS_HEADER == "<cyg/libc/stdlib/abs.inl>"
1266 # CYGBLD_ISO_STDLIB_ABS_HEADER == <cyg/libc/stdlib/abs.inl>
1272 cdl_option CYGIMP_LIBC_STDLIB_INLINE_DIV {
1274 # No user value, uncomment the following line to provide one.
1276 # value_source default
1278 # Requires: CYGBLD_ISO_STDLIB_DIV_HEADER == "<cyg/libc/stdlib/div.inl>"
1279 # CYGBLD_ISO_STDLIB_DIV_HEADER == <cyg/libc/stdlib/div.inl>
1283 # atof() / atoi() / atol()
1285 cdl_option CYGIMP_LIBC_STDLIB_INLINE_ATOX {
1287 # No user value, uncomment the following line to provide one.
1289 # value_source default
1291 # Requires: CYGBLD_ISO_STDLIB_STRCONV_HEADER == "<cyg/libc/stdlib/atox.inl>"
1292 # CYGBLD_ISO_STDLIB_STRCONV_HEADER == <cyg/libc/stdlib/atox.inl>
1297 # Random number generation
1298 # These options control the behaviour of the
1299 # functions rand(), srand() and rand_r()
1301 cdl_component CYGPKG_LIBC_RAND {
1302 # There is no associated value.
1306 # Per-thread random seed
1307 # doc: ref/libc-thread-safety.html
1308 # This option controls whether the pseudo-random
1309 # number generation functions rand() and srand()
1310 # have their state recorded on a per-thread
1311 # basis rather than global. If this option is
1312 # disabled, some per-thread space can be saved.
1313 # Note there is also a POSIX-standard rand_r()
1314 # function to achieve a similar effect with user
1315 # support. Enabling this option will use one slot
1316 # of kernel per-thread data. You should ensure you
1317 # have enough slots configured for all your
1320 cdl_option CYGSEM_LIBC_PER_THREAD_RAND {
1322 # No user value, uncomment the following line to provide one.
1324 # value_source default
1326 # Requires: CYGVAR_KERNEL_THREADS_DATA
1327 # CYGVAR_KERNEL_THREADS_DATA (unknown) == 0
1331 # Random number seed
1332 # This selects the initial random number seed for
1333 # rand()'s pseudo-random number generator. For
1334 # strict ISO standard compliance, this should be 1,
1335 # as per section 7.10.2.2 of the standard.
1337 cdl_option CYGNUM_LIBC_RAND_SEED {
1339 # No user value, uncomment the following line to provide one.
1341 # value_source default
1343 # Legal values: 0 to 0x7fffffff
1347 # Trace verbosity level for debugging the rand(),
1348 # srand() and rand_r() functions. Increase this
1349 # value to get additional trace output.
1351 cdl_option CYGNUM_LIBC_RAND_TRACE_LEVEL {
1353 # No user value, uncomment the following line to provide one.
1355 # value_source default
1357 # Legal values: 0 to 1
1360 # Simplest implementation
1361 # This provides a very simple implementation of rand()
1362 # that does not perform well with randomness in the
1363 # lower significant bits. However it is exceptionally
1364 # fast. It uses the sample algorithm from the ISO C
1367 cdl_option CYGIMP_LIBC_RAND_SIMPLEST {
1369 # No user value, uncomment the following line to provide one.
1371 # value_source default
1375 # Simple implementation #1
1376 # This provides a very simple implementation of rand()
1377 # based on the simplest implementation above. However
1378 # it does try to work around the lack of randomness
1379 # in the lower significant bits, at the expense of a
1382 cdl_option CYGIMP_LIBC_RAND_SIMPLE1 {
1389 # Knuth implementation #1
1390 # This implements a slightly more complex algorithm
1391 # published in Donald E. Knuth's Art of Computer
1392 # Programming Vol.2 section 3.6 (p.185 in the 3rd ed.).
1393 # This produces better random numbers than the
1394 # simplest approach but is slower.
1396 cdl_option CYGIMP_LIBC_RAND_KNUTH1 {
1405 # This option allows use of the utility function
1406 # strtod() (and consequently atof()) to convert
1407 # from string to double precision floating point
1408 # numbers. Disabling this option removes the
1409 # dependency on the math library package.
1411 cdl_option CYGFUN_LIBC_strtod {
1413 # No user value, uncomment the following line to provide one.
1415 # value_source default
1416 # Default value: 0 != CYGPKG_LIBM
1417 # CYGPKG_LIBM (unknown) == 0
1419 # Requires: CYGPKG_LIBM
1420 # CYGPKG_LIBM (unknown) == 0
1424 # Provides long long conversion functions
1425 # Enabling this option will provide support for the strtoll(),
1426 # strtoull() and atoll() conversion functions, which are
1427 # the long long variants of the standard versions of these
1428 # functions. Supporting this requires extra code and compile
1431 cdl_option CYGFUN_LIBC_STDLIB_CONV_LONGLONG {
1438 # bsearch() tracing level
1439 # Trace verbosity level for debugging the <stdlib.h>
1440 # binary search function bsearch(). Increase this
1441 # value to get additional trace output.
1443 cdl_option CYGNUM_LIBC_BSEARCH_TRACE_LEVEL {
1445 # No user value, uncomment the following line to provide one.
1447 # value_source default
1449 # Legal values: 0 to 1
1452 # qsort() tracing level
1453 # Trace verbosity level for debugging the <stdlib.h>
1454 # quicksort function qsort(). Increase this value
1455 # to get additional trace output.
1457 cdl_option CYGNUM_LIBC_QSORT_TRACE_LEVEL {
1459 # No user value, uncomment the following line to provide one.
1461 # value_source default
1463 # Legal values: 0 to 1
1466 # C library stdlib build options
1467 # Package specific build options including control over
1468 # compiler flags used only in building this package,
1469 # and details of which tests are built.
1471 cdl_component CYGPKG_LIBC_STDLIB_OPTIONS {
1472 # There is no associated value.
1476 # Additional compiler flags
1477 # This option modifies the set of compiler flags for
1478 # building this package. These flags are used in addition
1479 # to the set of global flags.
1481 cdl_option CYGPKG_LIBC_STDLIB_CFLAGS_ADD {
1483 # No user value, uncomment the following line to provide one.
1484 # user_value "-fno-rtti -Woverloaded-virtual"
1485 # value_source default
1486 # Default value: "-fno-rtti -Woverloaded-virtual"
1489 # Suppressed compiler flags
1490 # This option modifies the set of compiler flags for
1491 # building this package. These flags are removed from
1492 # the set of global flags if present.
1494 cdl_option CYGPKG_LIBC_STDLIB_CFLAGS_REMOVE {
1496 # No user value, uncomment the following line to provide one.
1497 # user_value -Wno-pointer-sign
1498 # value_source default
1499 # Default value: -Wno-pointer-sign
1502 # C library stdlib tests
1503 # This option specifies the set of tests for this package.
1505 cdl_option CYGPKG_LIBC_STDLIB_TESTS {
1506 # Calculated value: "tests/abs tests/atoi tests/atol tests/bsearch tests/div tests/getenv tests/labs tests/ldiv tests/qsort tests/rand1 tests/rand2 tests/rand3 tests/rand4 tests/srand tests/strtol tests/strtoul"
1508 # Current_value: tests/abs tests/atoi tests/atol tests/bsearch tests/div tests/getenv tests/labs tests/ldiv tests/qsort tests/rand1 tests/rand2 tests/rand3 tests/rand4 tests/srand tests/strtol tests/strtoul
1515 # doc: ref/the-ecos-hardware-abstraction-layer.html
1516 # The eCos HAL package provide a porting layer for
1517 # higher-level parts of the system such as the kernel and the
1518 # C library. Each installation should have HAL packages for
1519 # one or more architectures, and for each architecture there
1520 # may be one or more supported platforms. It is necessary to
1521 # select one target architecture and one platform for that
1522 # architecture. There are also a number of configuration
1523 # options that are common to all HAL packages.
1525 cdl_package CYGPKG_HAL {
1526 # Packages cannot be added or removed, nor can their version be changed,
1527 # simply by editing their value. Instead the appropriate configuration
1528 # should be used to perform these actions.
1530 # This value cannot be modified here.
1532 # Current value: 1 current
1533 # Requires: CYGPKG_INFRA
1534 # CYGPKG_INFRA == current
1537 # The following properties are affected by this value
1541 # Platform-independent HAL options
1542 # A number of configuration options are common to most or all
1543 # HAL packages, for example options controlling how much state
1544 # should be saved during a context switch. The implementations
1545 # of these options will vary from architecture to architecture.
1547 cdl_component CYGPKG_HAL_COMMON {
1548 # There is no associated value.
1552 # Provide eCos kernel support
1553 # The HAL can be configured to either support the full eCos
1554 # kernel, or to support only very simple applications which do
1555 # not require a full kernel. If kernel support is not required
1556 # then some of the startup, exception, and interrupt handling
1557 # code can be eliminated.
1559 cdl_option CYGFUN_HAL_COMMON_KERNEL_SUPPORT {
1561 # No user value, uncomment the following line to provide one.
1563 # value_source default
1564 # Default value: CYGPKG_KERNEL
1565 # CYGPKG_KERNEL (unknown) == 0
1567 # Requires: CYGPKG_KERNEL
1568 # CYGPKG_KERNEL (unknown) == 0
1572 # HAL exception support
1573 # When a processor exception occurs, for example an attempt to
1574 # execute an illegal instruction or to perform a divide by
1575 # zero, this exception may be handled in a number of different
1576 # ways. If the target system has gdb support then typically
1577 # the exception will be handled by gdb code. Otherwise if the
1578 # HAL exception support is enabled then the HAL will invoke a
1579 # routine deliver_exception(). Typically this routine will be
1580 # provided by the eCos kernel, but it is possible for
1581 # application code to provide its own implementation. If the
1582 # HAL exception support is not enabled and a processor
1583 # exception occurs then the behaviour of the system is
1586 cdl_option CYGPKG_HAL_EXCEPTIONS {
1588 # No user value, uncomment the following line to provide one.
1590 # value_source default
1591 # Default value: CYGPKG_KERNEL_EXCEPTIONS
1592 # CYGPKG_KERNEL_EXCEPTIONS (unknown) == 0
1594 # Requires: CYGPKG_KERNEL_EXCEPTIONS
1595 # CYGPKG_KERNEL_EXCEPTIONS (unknown) == 0
1599 # Stop calling constructors early
1600 # This option supports environments where some constructors
1601 # must be run in the context of a thread rather than at
1602 # simple system startup time. A boolean flag named
1603 # cyg_hal_stop_constructors is set to 1 when constructors
1604 # should no longer be invoked. It is up to some other
1605 # package to deal with the rest of the constructors.
1606 # In the current version this is only possible with the
1609 cdl_option CYGSEM_HAL_STOP_CONSTRUCTORS_ON_FLAG {
1611 # No user value, uncomment the following line to provide one.
1613 # value_source default
1615 # Requires: CYGSEM_LIBC_INVOKE_DEFAULT_STATIC_CONSTRUCTORS
1616 # CYGSEM_LIBC_INVOKE_DEFAULT_STATIC_CONSTRUCTORS (unknown) == 0
1620 # HAL uses the MMU and allows for CDL manipulation of it's use
1622 cdl_interface CYGINT_HAL_SUPPORTS_MMU_TABLES {
1623 # No options implement this inferface
1624 # This value cannot be modified here.
1628 # The following properties are affected by this value
1629 # option CYGSEM_HAL_INSTALL_MMU_TABLES
1630 # ActiveIf: CYGINT_HAL_SUPPORTS_MMU_TABLES
1633 # Install MMU tables.
1634 # This option controls whether this application installs
1635 # its own Memory Management Unit (MMU) tables, or relies on the
1636 # existing environment to run.
1638 cdl_option CYGSEM_HAL_INSTALL_MMU_TABLES {
1639 # This option is not active
1640 # ActiveIf constraint: CYGINT_HAL_SUPPORTS_MMU_TABLES
1641 # CYGINT_HAL_SUPPORTS_MMU_TABLES == 0
1645 # No user value, uncomment the following line to provide one.
1647 # value_source default
1648 # Default value: CYG_HAL_STARTUP != "RAM"
1649 # CYG_HAL_STARTUP == ROMRAM
1652 # The following properties are affected by this value
1653 # option CYGSEM_HAL_STATIC_MMU_TABLES
1654 # Requires: CYGSEM_HAL_INSTALL_MMU_TABLES
1657 # Use static MMU tables.
1658 # This option defines an environment where any Memory
1659 # Management Unit (MMU) tables are constant. Normally used by ROM
1660 # based environments, this provides a way to save RAM usage which
1661 # would otherwise be required for these tables.
1663 cdl_option CYGSEM_HAL_STATIC_MMU_TABLES {
1665 # No user value, uncomment the following line to provide one.
1667 # value_source default
1669 # Requires: CYGSEM_HAL_INSTALL_MMU_TABLES
1670 # CYGSEM_HAL_INSTALL_MMU_TABLES == 0
1674 # Route diagnostic output to debug channel
1675 # If not inheriting the console setup from the ROM monitor,
1676 # it is possible to redirect diagnostic output to the debug
1677 # channel by enabling this option. Depending on the debugger
1678 # used it may also be necessary to select a mangler for the
1679 # output to be displayed by the debugger.
1681 cdl_component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN {
1682 # ActiveIf constraint: !CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE
1683 # CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE == 0
1685 # ActiveIf constraint: CYGPKG_HAL_ARM || CYGPKG_HAL_POWERPC_MPC8xx || CYGPKG_HAL_V85X_V850 || CYGSEM_HAL_VIRTUAL_VECTOR_DIAG
1686 # CYGPKG_HAL_ARM == current
1687 # CYGPKG_HAL_POWERPC_MPC8xx (unknown) == 0
1688 # CYGPKG_HAL_V85X_V850 (unknown) == 0
1689 # CYGSEM_HAL_VIRTUAL_VECTOR_DIAG == 1
1693 # No user value, uncomment the following line to provide one.
1695 # value_source default
1696 # Default value: (CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS || CYG_HAL_STARTUP == "RAM") ? 1 : 0
1697 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
1698 # CYG_HAL_STARTUP == ROMRAM
1701 # The following properties are affected by this value
1702 # option CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE
1703 # Calculated: !CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE && !CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
1707 # Mangler used on diag output
1708 # It is sometimes necessary to mangle (encode) the
1709 # diag ASCII text output in order for it to show up at the
1710 # other end. In particular, GDB may silently ignore raw
1713 cdl_option CYGSEM_HAL_DIAG_MANGLER {
1714 # This option is not active
1715 # The parent CYGDBG_HAL_DIAG_TO_DEBUG_CHAN is disabled
1718 # No user value, uncomment the following line to provide one.
1720 # value_source default
1721 # Default value: GDB
1722 # Legal values: "GDB" "None"
1727 # HAL interrupt handling
1728 # A number of configuration options related to interrupt
1729 # handling are common to most or all HAL packages, even though
1730 # the implementations will vary from architecture to
1733 cdl_component CYGPKG_HAL_COMMON_INTERRUPTS {
1734 # There is no associated value.
1738 # Use separate stack for interrupts
1739 # When an interrupt occurs this interrupt can be handled either
1740 # on the current stack or on a separate stack maintained by the
1741 # HAL. Using a separate stack requires a small number of extra
1742 # instructions in the interrupt handling code, but it has the
1743 # advantage that it is no longer necessary to allow extra space
1744 # in every thread stack for the interrupt handlers. The amount
1745 # of extra space required depends on the interrupt handlers
1746 # that are being used.
1748 cdl_option CYGIMP_HAL_COMMON_INTERRUPTS_USE_INTERRUPT_STACK {
1750 # No user value, uncomment the following line to provide one.
1752 # The inferred value should not be edited directly.
1754 # value_source inferred
1757 # The following properties are affected by this value
1758 # package CYGPKG_REDBOOT
1759 # Requires: CYGIMP_HAL_COMMON_INTERRUPTS_USE_INTERRUPT_STACK == 0
1762 # Interrupt stack size
1763 # This configuration option specifies the stack size in bytes
1764 # for the interrupt stack. Typically this should be a multiple
1765 # of 16, but the exact requirements will vary from architecture
1766 # to architecture. The interrupt stack serves two separate
1767 # purposes. It is used as the stack during system
1768 # initialization. In addition, if the interrupt system is
1769 # configured to use a separate stack then all interrupts will
1770 # be processed on this stack. The exact memory requirements
1771 # will vary from application to application, and will depend
1772 # heavily on whether or not other interrupt-related options,
1773 # for example nested interrupts, are enabled. On most targets,
1774 # in a configuration with no kernel this stack will also be
1775 # the stack used to invoke the application, and must obviously
1776 # be appropriately large in that case.
1778 cdl_option CYGNUM_HAL_COMMON_INTERRUPTS_STACK_SIZE {
1780 # No user value, uncomment the following line to provide one.
1782 # value_source default
1783 # Default value: CYGPKG_KERNEL ? 4096 : 32768
1784 # CYGPKG_KERNEL (unknown) == 0
1786 # Legal values: 128 to 1048576
1789 # Allow nested interrupts
1790 # When an interrupt occurs the HAL interrupt handling code can
1791 # either leave interrupts disabled for the duration of the
1792 # interrupt handling code, or by doing some extra work it can
1793 # reenable interrupts before invoking the interrupt handler and
1794 # thus allow nested interrupts to happen. If all the interrupt
1795 # handlers being used are small and do not involve any loops
1796 # then it is usually better to disallow nested interrupts.
1797 # However if any of the interrupt handlers are more complicated
1798 # than nested interrupts will usually be required.
1800 cdl_option CYGSEM_HAL_COMMON_INTERRUPTS_ALLOW_NESTING {
1802 # No user value, uncomment the following line to provide one.
1804 # value_source default
1808 # Save minimum context on interrupt
1809 # The HAL interrupt handling code can exploit the calling conventions
1810 # defined for a given architecture to reduce the amount of state
1811 # that has to be saved. Generally this improves performance and
1812 # reduces code size. However it can make source-level debugging
1815 cdl_option CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT {
1817 # No user value, uncomment the following line to provide one.
1819 # The inferred value should not be edited directly.
1821 # value_source inferred
1824 # The following properties are affected by this value
1825 # option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
1826 # Requires: ! CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT
1827 # component CYGBLD_BUILD_REDBOOT
1828 # Requires: ! CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT
1831 # Chain all interrupts together
1832 # Interrupts can be attached to vectors either singly, or be
1833 # chained together. The latter is necessary if there is no way
1834 # of discovering which device has interrupted without
1835 # inspecting the device itself. It can also reduce the amount
1836 # of RAM needed for interrupt decoding tables and code.
1838 cdl_option CYGIMP_HAL_COMMON_INTERRUPTS_CHAIN {
1840 # No user value, uncomment the following line to provide one.
1842 # value_source default
1846 # Ignore spurious [fleeting] interrupts
1847 # On some hardware, interrupt sources may not be de-bounced or
1848 # de-glitched. Rather than try to handle these interrupts (no
1849 # handling may be possible), this option allows the HAL to simply
1850 # ignore them. In most cases, if the interrupt is real it will
1851 # reoccur in a detectable form.
1853 cdl_option CYGIMP_HAL_COMMON_INTERRUPTS_IGNORE_SPURIOUS {
1855 # No user value, uncomment the following line to provide one.
1857 # value_source default
1862 # HAL context switch support
1863 # A number of configuration options related to thread contexts
1864 # are common to most or all HAL packages, even though the
1865 # implementations will vary from architecture to architecture.
1867 cdl_component CYGPKG_HAL_COMMON_CONTEXT {
1868 # There is no associated value.
1870 # The following properties are affected by this value
1874 # Use minimum thread context
1875 # The thread context switch code can exploit the calling
1876 # conventions defined for a given architecture to reduce the
1877 # amount of state that has to be saved during a context
1878 # switch. Generally this improves performance and reduces
1879 # code size. However it can make source-level debugging more
1882 cdl_option CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM {
1884 # No user value, uncomment the following line to provide one.
1886 # The inferred value should not be edited directly.
1888 # value_source inferred
1891 # The following properties are affected by this value
1892 # option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
1893 # Requires: ! CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM
1894 # component CYGBLD_BUILD_REDBOOT
1895 # Requires: ! CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM
1899 # Explicit control over cache behaviour
1900 # These options let the default behaviour of the caches
1901 # be easily configurable.
1903 cdl_component CYGPKG_HAL_CACHE_CONTROL {
1904 # There is no associated value.
1908 # Enable DATA cache on startup
1909 # Enabling this option will cause the data cache to be enabled
1910 # as soon as practicable when eCos starts up. One would choose
1911 # to disable this if the data cache cannot safely be turned on,
1912 # such as a case where the cache(s) require additional platform
1915 cdl_component CYGSEM_HAL_ENABLE_DCACHE_ON_STARTUP {
1917 # No user value, uncomment the following line to provide one.
1919 # value_source default
1924 # DATA cache mode on startup
1925 # This option controls the mode the cache will be set to
1926 # when enabled on startup.
1928 cdl_option CYGSEM_HAL_DCACHE_STARTUP_MODE {
1930 # No user value, uncomment the following line to provide one.
1931 # user_value COPYBACK
1932 # value_source default
1933 # Default value: COPYBACK
1934 # Legal values: "COPYBACK" "WRITETHRU"
1938 # Enable INSTRUCTION cache on startup
1939 # Enabling this option will cause the instruction cache to be enabled
1940 # as soon as practicable when eCos starts up. One would choose
1941 # to disable this if the instruction cache cannot safely be turned on,
1942 # such as a case where the cache(s) require additional platform
1945 cdl_option CYGSEM_HAL_ENABLE_ICACHE_ON_STARTUP {
1947 # No user value, uncomment the following line to provide one.
1949 # value_source default
1954 # Source-level debugging support
1955 # If the source level debugger gdb is to be used for debugging
1956 # application code then it may be necessary to configure in support
1957 # for this in the HAL.
1959 cdl_component CYGPKG_HAL_DEBUG {
1960 # There is no associated value.
1964 # Support for GDB stubs
1965 # The HAL implements GDB stubs for the target.
1967 cdl_interface CYGINT_HAL_DEBUG_GDB_STUBS {
1968 # Implemented by CYGPKG_HAL_ARM_TX53KARO, active, enabled
1969 # This value cannot be modified here.
1973 # The following properties are affected by this value
1974 # option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
1975 # ActiveIf: CYGINT_HAL_DEBUG_GDB_STUBS
1976 # option CYGBLD_BUILD_REDBOOT_WITH_GDB
1977 # ActiveIf: CYGINT_HAL_DEBUG_GDB_STUBS
1980 # Include GDB stubs in HAL
1981 # This option causes a set of GDB stubs to be included into the
1982 # system. On some target systems the GDB support will be
1983 # provided by other means, for example by a ROM monitor. On
1984 # other targets, especially when building a ROM-booting system,
1985 # the necessary support has to go into the target library
1986 # itself. When GDB stubs are include in a configuration, HAL
1987 # serial drivers must also be included.
1989 cdl_option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS {
1990 # ActiveIf constraint: CYGINT_HAL_DEBUG_GDB_STUBS
1991 # CYGINT_HAL_DEBUG_GDB_STUBS == 1
1995 # No user value, uncomment the following line to provide one.
1997 # The inferred value should not be edited directly.
1999 # value_source inferred
2001 # Requires: ! CYGSEM_HAL_USE_ROM_MONITOR
2002 # CYGSEM_HAL_USE_ROM_MONITOR == 0
2004 # Requires: ! CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT
2005 # CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT == 0
2007 # Requires: ! CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM
2008 # CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM == 0
2010 # Requires: !CYGSEM_HAL_VIRTUAL_VECTOR_DIAG || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2011 # CYGSEM_HAL_VIRTUAL_VECTOR_DIAG == 1
2012 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS == 1
2015 # The following properties are affected by this value
2016 # component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
2017 # DefaultValue: (CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS || CYG_HAL_STARTUP == "RAM") ? 1 : 0
2018 # option CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2019 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2020 # option CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2021 # DefaultValue: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2022 # option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
2023 # ActiveIf: CYGSEM_HAL_USE_ROM_MONITOR || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2024 # option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
2025 # DefaultValue: !CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2026 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2027 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2028 # option CYGBLD_BUILD_COMMON_GDB_STUBS
2029 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2030 # option CYGPKG_HAL_GDB_FILEIO
2031 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2032 # option CYGHWR_HAL_ARM_DUMP_EXCEPTIONS
2033 # Requires: !CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2034 # option CYGHWR_HAL_ARM_ICE_THREAD_SUPPORT
2035 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2036 # option CYGBLD_BUILD_REDBOOT_WITH_GDB
2037 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2040 # Support for external break support in GDB stubs
2041 # The HAL implements external break (or asynchronous interrupt)
2042 # in the GDB stubs for the target.
2044 cdl_interface CYGINT_HAL_DEBUG_GDB_STUBS_BREAK {
2045 # Implemented by CYGPKG_HAL_ARM_TX53KARO, active, enabled
2046 # This value cannot be modified here.
2050 # The following properties are affected by this value
2051 # option CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2052 # ActiveIf: CYGINT_HAL_DEBUG_GDB_STUBS_BREAK
2055 # Include GDB external break support for stubs
2056 # This option causes the GDB stub to add a serial interrupt handler
2057 # which will listen for GDB break packets. This lets you stop the
2058 # target asynchronously when using GDB, usually by hitting Control+C
2059 # or pressing the STOP button. This option differs from
2060 # CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT in that it is used when
2061 # GDB stubs are present.
2063 cdl_option CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT {
2064 # ActiveIf constraint: CYGINT_HAL_DEBUG_GDB_STUBS_BREAK
2065 # CYGINT_HAL_DEBUG_GDB_STUBS_BREAK == 1
2069 # No user value, uncomment the following line to provide one.
2071 # value_source default
2072 # Default value: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2073 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
2075 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2076 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
2079 # The following properties are affected by this value
2080 # option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
2081 # Requires: !CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2082 # option CYGOPT_HAL_ARM_SYSCALL_GPROF_SUPPORT
2083 # ActiveIf: CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT || CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2084 # option CYGBLD_BUILD_REDBOOT_WITH_GDB
2085 # Requires: CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2088 # Platform does not support CTRLC
2090 cdl_interface CYGINT_HAL_DEBUG_GDB_CTRLC_UNSUPPORTED {
2091 # No options implement this inferface
2092 # This value cannot be modified here.
2096 # The following properties are affected by this value
2097 # option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
2098 # ActiveIf: CYGINT_HAL_DEBUG_GDB_CTRLC_UNSUPPORTED == 0
2101 # Include GDB external break support when no stubs
2102 # This option adds an interrupt handler for the GDB serial line
2103 # which will listen for GDB break packets. This lets you stop the
2104 # target asynchronously when using GDB, usually by hitting Control+C
2105 # or pressing the STOP button. This option differs from
2106 # CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT in that it is used when the GDB
2107 # stubs are NOT present.
2109 cdl_option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT {
2110 # This option is not active
2111 # ActiveIf constraint: CYGSEM_HAL_USE_ROM_MONITOR || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2112 # CYGSEM_HAL_USE_ROM_MONITOR == 0
2113 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
2115 # ActiveIf constraint: CYGINT_HAL_DEBUG_GDB_CTRLC_UNSUPPORTED == 0
2116 # CYGINT_HAL_DEBUG_GDB_CTRLC_UNSUPPORTED == 0
2120 # No user value, uncomment the following line to provide one.
2122 # value_source default
2123 # Default value: !CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2124 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
2126 # Requires: !CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2127 # CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT == 0
2130 # The following properties are affected by this value
2131 # option CYGOPT_HAL_ARM_SYSCALL_GPROF_SUPPORT
2132 # ActiveIf: CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT || CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2133 # component CYGBLD_BUILD_REDBOOT
2134 # Requires: ! CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
2137 # Include GDB multi-threading debug support
2138 # This option enables some extra HAL code which is needed
2139 # to support multi-threaded source level debugging.
2141 cdl_option CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT {
2142 # ActiveIf constraint: CYGSEM_HAL_ROM_MONITOR || CYGDBG_KERNEL_DEBUG_GDB_THREAD_SUPPORT
2143 # CYGSEM_HAL_ROM_MONITOR == 1
2144 # CYGDBG_KERNEL_DEBUG_GDB_THREAD_SUPPORT (unknown) == 0
2148 # No user value, uncomment the following line to provide one.
2150 # value_source default
2153 # The following properties are affected by this value
2154 # option CYGHWR_HAL_ARM_ICE_THREAD_SUPPORT
2155 # Requires: CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT
2156 # option CYGBLD_BUILD_REDBOOT_WITH_THREADS
2157 # Requires: CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT
2160 # Number of times to retry sending a $O packet
2161 # This option controls the number of attempts that eCos programs
2162 # will make to send a $O packet to a host GDB process. If it is
2163 # set non-zero, then the target process will attempt to resend the
2164 # $O packet data up to this number of retries. Caution: use of
2165 # this option is not recommended as it can thoroughly confuse the
2168 cdl_option CYGNUM_HAL_DEBUG_GDB_PROTOCOL_RETRIES {
2170 # No user value, uncomment the following line to provide one.
2172 # value_source default
2176 # Timeout period for GDB packets
2177 # This option controls the time (in milliseconds) that eCos programs
2178 # will wait for a response when sending packets to a host GDB process.
2179 # If this time elapses, then the packet will be resent, up to some
2180 # maximum number of times (CYGNUM_HAL_DEBUG_GDB_PROTOCOL_RETRIES).
2182 cdl_option CYGNUM_HAL_DEBUG_GDB_PROTOCOL_TIMEOUT {
2184 # No user value, uncomment the following line to provide one.
2186 # value_source default
2187 # Default value: 500
2190 # Location of CRC32 table
2191 # The stubs use a 1 kilobyte CRC table that can either be pregenerated
2192 # and placed in ROM, or generated at runtime in RAM. Depending on
2193 # your memory constraints, one of these options may be better.
2195 cdl_option CYGDBG_HAL_CRCTABLE_LOCATION {
2197 # No user value, uncomment the following line to provide one.
2199 # value_source default
2200 # Default value: RAM
2201 # Legal values: "ROM" "RAM"
2205 # ROM monitor support
2206 # Support for ROM monitors can be built in to your application.
2207 # It may also be relevant to build your application as a ROM monitor
2208 # itself. Such options are contained here if relevant for your chosen
2209 # platform. The options and ROM monitors available to choose are
2210 # platform-dependent.
2212 cdl_component CYGPKG_HAL_ROM_MONITOR {
2213 # There is no associated value.
2215 # The following properties are affected by this value
2219 # Target has virtual vector support
2221 cdl_interface CYGINT_HAL_VIRTUAL_VECTOR_SUPPORT {
2222 # Implemented by CYGPKG_HAL_ARM_TX53KARO, active, enabled
2223 # This value cannot be modified here.
2227 # The following properties are affected by this value
2228 # component CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT
2229 # ActiveIf: CYGINT_HAL_VIRTUAL_VECTOR_SUPPORT
2232 # Target supports baud rate control via vectors
2233 # Whether this target supports the __COMMCTL_GETBAUD
2234 # and __COMMCTL_SETBAUD virtual vector comm control operations.
2236 cdl_interface CYGINT_HAL_VIRTUAL_VECTOR_COMM_BAUD_SUPPORT {
2237 # Implemented by CYGPKG_HAL_ARM_MX53, active, enabled
2238 # This value cannot be modified here.
2242 # The following properties are affected by this value
2243 # option CYGSEM_REDBOOT_VARIABLE_BAUD_RATE
2244 # ActiveIf: CYGINT_HAL_VIRTUAL_VECTOR_COMM_BAUD_SUPPORT
2247 # Enable use of virtual vector calling interface
2248 # Virtual vector support allows the HAL to let the ROM
2249 # monitor handle certain operations. The virtual vector table
2250 # defines a calling interface between applications running in
2251 # RAM and the ROM monitor.
2253 cdl_component CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT {
2254 # ActiveIf constraint: CYGINT_HAL_VIRTUAL_VECTOR_SUPPORT
2255 # CYGINT_HAL_VIRTUAL_VECTOR_SUPPORT == 1
2258 # Calculated value: 1
2262 # The following properties are affected by this value
2263 # component CYGBLD_BUILD_REDBOOT
2264 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT
2265 # package CYGPKG_DEVS_ETH_PHY
2266 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT
2270 # Inherit console settings from ROM monitor
2271 # When this option is set, the application will inherit
2272 # the console as set up by the ROM monitor. This means
2273 # that the application will use whatever channel and
2274 # mangling style was used by the ROM monitor when
2275 # the application was launched.
2277 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE {
2278 # This option is not active
2279 # ActiveIf constraint: CYGSEM_HAL_USE_ROM_MONITOR
2280 # CYGSEM_HAL_USE_ROM_MONITOR == 0
2284 # No user value, uncomment the following line to provide one.
2286 # value_source default
2287 # Default value: !CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2288 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS == 1
2291 # The following properties are affected by this value
2292 # component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
2293 # ActiveIf: !CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE
2294 # option CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE
2295 # Calculated: !CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE && !CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
2298 # Debug channel is configurable
2299 # This option is a configuration hint - it is enabled
2300 # when the HAL initialization code will make use
2301 # of the debug channel configuration option.
2303 cdl_option CYGPRI_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_CONFIGURABLE {
2304 # Calculated value: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2305 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS == 1
2309 # The following properties are affected by this value
2310 # option CYGNUM_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL
2311 # ActiveIf: CYGPRI_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_CONFIGURABLE
2314 # Console channel is configurable
2315 # This option is a configuration hint - it is enabled
2316 # when the HAL initialization code will make use
2317 # of the console channel configuration option.
2319 cdl_option CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE {
2320 # Calculated value: !CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE && !CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
2321 # CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE == 0
2322 # CYGDBG_HAL_DIAG_TO_DEBUG_CHAN == 0
2326 # The following properties are affected by this value
2327 # option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL
2328 # ActiveIf: CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE
2331 # Initialize whole of virtual vector table
2332 # This option will cause the whole of the virtual
2333 # vector table to be initialized with dummy values on
2334 # startup. When this option is enabled, all the
2335 # options below must also be enabled - or the
2336 # table would be empty when the application
2338 # On targets where older ROM monitors without
2339 # virtual vector support may still be in use, it is
2340 # necessary for RAM applictions to initialize the
2341 # table (since all HAL diagnostics and debug IO
2342 # happens via the table).
2344 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE {
2346 # No user value, uncomment the following line to provide one.
2348 # value_source default
2349 # Default value: CYG_HAL_STARTUP != "RAM" || !CYGSEM_HAL_USE_ROM_MONITOR
2350 # CYG_HAL_STARTUP == ROMRAM
2351 # CYGSEM_HAL_USE_ROM_MONITOR == 0
2353 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET
2354 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET == 1
2356 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US
2357 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US == 1
2359 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE
2360 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE == 1
2362 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA
2363 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA == 1
2365 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2366 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS == 1
2369 # The following properties are affected by this value
2370 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2371 # ActiveIf: !CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2372 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET
2373 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2374 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_VERSION
2375 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2376 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US
2377 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2378 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE
2379 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2380 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA
2381 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2382 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2383 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2386 # Claim virtual vector table entries by default
2387 # By default most virtual vectors will be claimed by
2388 # RAM startup configurations, meaning that the RAM
2389 # application will provide the services. The
2390 # exception is COMMS support (HAL
2391 # diagnostics/debugging IO) which is left in the
2392 # control of the ROM monitor.
2393 # The reasoning behind this is to get as much of the
2394 # code exercised during regular development so it
2395 # is known to be working the few times a new ROM
2396 # monitor or a ROM production configuration is used
2397 # - COMMS are excluded only by necessity in order to
2398 # avoid breaking an existing debugger connections
2399 # (there may be ways around this).
2400 # For production RAM configurations this option can
2401 # be switched off, causing the appliction to rely on
2402 # the ROM monitor for these services, thus
2403 # saving some space.
2404 # Individual vectors may also be left unclaimed,
2405 # controlled by the below options (meaning that the
2406 # associated service provided by the ROM monitor
2409 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT {
2410 # This option is not active
2411 # ActiveIf constraint: !CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2412 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
2416 # No user value, uncomment the following line to provide one.
2418 # value_source default
2421 # The following properties are affected by this value
2422 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET
2423 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2424 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US
2425 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2426 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE
2427 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2428 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA
2429 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2432 # Claim reset virtual vectors
2433 # This option will cause the reset and kill_by_reset
2434 # virtual vectors to be claimed.
2436 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET {
2438 # No user value, uncomment the following line to provide one.
2440 # value_source default
2441 # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2442 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
2443 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT == 0
2446 # The following properties are affected by this value
2447 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2448 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET
2451 # Claim version virtual vectors
2452 # This option will cause the version
2453 # virtual vectors to be claimed.
2455 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_VERSION {
2457 # No user value, uncomment the following line to provide one.
2459 # value_source default
2460 # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2461 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
2465 # Claim delay_us virtual vector
2466 # This option will cause the delay_us
2467 # virtual vector to be claimed.
2469 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US {
2471 # No user value, uncomment the following line to provide one.
2473 # value_source default
2474 # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2475 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
2476 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT == 0
2479 # The following properties are affected by this value
2480 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2481 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US
2484 # Claim cache virtual vectors
2485 # This option will cause the cache virtual vectors
2488 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE {
2490 # No user value, uncomment the following line to provide one.
2492 # value_source default
2493 # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2494 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
2495 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT == 0
2498 # The following properties are affected by this value
2499 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2500 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE
2503 # Claim data virtual vectors
2504 # This option will cause the data virtual vectors
2505 # to be claimed. At present there is only one, used
2506 # by the RedBoot ethernet driver to share diag output.
2508 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA {
2510 # No user value, uncomment the following line to provide one.
2512 # value_source default
2513 # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2514 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
2515 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT == 0
2518 # The following properties are affected by this value
2519 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2520 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA
2523 # Claim comms virtual vectors
2524 # This option will cause the communication tables
2525 # that are part of the virtual vectors mechanism to
2526 # be claimed. Note that doing this may cause an
2527 # existing ROM monitor communication connection to
2528 # be closed. For this reason, the option is disabled
2529 # per default for normal application
2532 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS {
2534 # No user value, uncomment the following line to provide one.
2536 # value_source default
2537 # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2538 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
2539 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
2542 # The following properties are affected by this value
2543 # option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2544 # Requires: !CYGSEM_HAL_VIRTUAL_VECTOR_DIAG || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2545 # option CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE
2546 # DefaultValue: !CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2547 # option CYGPRI_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_CONFIGURABLE
2548 # Calculated: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2549 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2550 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2553 # Do diagnostic IO via virtual vector table
2554 # All HAL IO happens via the virtual vector table / comm
2555 # tables when those tables are supported by the HAL.
2556 # If so desired, the low-level IO functions can
2557 # still be provided by the RAM application by
2558 # enabling the CLAIM_COMMS option.
2560 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_DIAG {
2561 # Calculated value: 1
2565 # The following properties are affected by this value
2566 # component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
2567 # ActiveIf: CYGPKG_HAL_ARM || CYGPKG_HAL_POWERPC_MPC8xx || CYGPKG_HAL_V85X_V850 || CYGSEM_HAL_VIRTUAL_VECTOR_DIAG
2568 # option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2569 # Requires: !CYGSEM_HAL_VIRTUAL_VECTOR_DIAG || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2573 # Behave as a ROM monitor
2574 # Enable this option if this program is to be used as a ROM monitor,
2575 # i.e. applications will be loaded into RAM on the TX53 module, and this
2576 # ROM monitor may process exceptions or interrupts generated from the
2577 # application. This enables features such as utilizing a separate
2578 # interrupt stack when exceptions are generated.
2580 cdl_option CYGSEM_HAL_ROM_MONITOR {
2582 # No user value, uncomment the following line to provide one.
2584 # The inferred value should not be edited directly.
2586 # value_source inferred
2588 # Requires: CYG_HAL_STARTUP == "ROM" || CYG_HAL_STARTUP == "ROMRAM"
2589 # CYG_HAL_STARTUP == ROMRAM
2590 # CYG_HAL_STARTUP == ROMRAM
2593 # The following properties are affected by this value
2594 # option CYGBLD_ARM_ENABLE_THUMB_INTERWORK
2595 # DefaultValue: (CYGHWR_THUMB || CYGSEM_HAL_ROM_MONITOR)
2596 # option CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT
2597 # ActiveIf: CYGSEM_HAL_ROM_MONITOR || CYGDBG_KERNEL_DEBUG_GDB_THREAD_SUPPORT
2598 # option CYGPRI_REDBOOT_ROM_MONITOR
2599 # Requires: CYGSEM_HAL_ROM_MONITOR
2602 # Work with a ROM monitor
2603 # Support can be enabled for different varieties of ROM monitor.
2604 # This support changes various eCos semantics such as the encoding
2605 # of diagnostic output, or the overriding of hardware interrupt
2607 # Firstly there is "Generic" support which prevents the HAL
2608 # from overriding the hardware vectors that it does not use, to
2609 # instead allow an installed ROM monitor to handle them. This is
2610 # the most basic support which is likely to be common to most
2611 # implementations of ROM monitor.
2612 # "GDB_stubs" provides support when GDB stubs are included in
2613 # the ROM monitor or boot ROM.
2615 cdl_option CYGSEM_HAL_USE_ROM_MONITOR {
2617 # No user value, uncomment the following line to provide one.
2619 # value_source default
2620 # Default value: CYG_HAL_STARTUP == "RAM" ? "GDB_stubs" : 0
2621 # CYG_HAL_STARTUP == ROMRAM
2623 # Legal values: "Generic" "GDB_stubs"
2624 # Requires: CYG_HAL_STARTUP == "RAM"
2625 # CYG_HAL_STARTUP == ROMRAM
2628 # The following properties are affected by this value
2629 # option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2630 # Requires: ! CYGSEM_HAL_USE_ROM_MONITOR
2631 # option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
2632 # ActiveIf: CYGSEM_HAL_USE_ROM_MONITOR || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2633 # option CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE
2634 # ActiveIf: CYGSEM_HAL_USE_ROM_MONITOR
2635 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2636 # DefaultValue: CYG_HAL_STARTUP != "RAM" || !CYGSEM_HAL_USE_ROM_MONITOR
2640 # Platform defined I/O channels.
2641 # Platforms which provide additional I/O channels can implement
2642 # this interface, indicating that the function plf_if_init()
2643 # needs to be called.
2645 cdl_interface CYGINT_HAL_PLF_IF_INIT {
2646 # No options implement this inferface
2647 # This value cannot be modified here.
2652 # Platform IDE I/O support.
2653 # Platforms which provide IDE controllers can implement
2654 # this interface, indicating that IDE I/O macros are
2657 cdl_interface CYGINT_HAL_PLF_IF_IDE {
2658 # No options implement this inferface
2659 # This value cannot be modified here.
2663 # The following properties are affected by this value
2664 # component CYGSEM_REDBOOT_DISK_IDE
2665 # ActiveIf: CYGINT_HAL_PLF_IF_IDE != 0
2668 # File I/O operations via GDB
2669 # This option enables support for various file I/O
2670 # operations using the GDB remote protocol to communicate
2671 # with GDB. The operations are then performed on the
2672 # debugging host by proxy. These operations are only
2673 # currently available by using a system call interface
2674 # to RedBoot. This may change in the future.
2676 cdl_option CYGPKG_HAL_GDB_FILEIO {
2677 # This option is not active
2678 # ActiveIf constraint: CYGSEM_REDBOOT_BSP_SYSCALLS
2679 # CYGSEM_REDBOOT_BSP_SYSCALLS == 0
2683 # No user value, uncomment the following line to provide one.
2685 # value_source default
2687 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2688 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
2692 # Build Compiler sanity checking tests
2693 # Enabling this option causes compiler tests to be built.
2695 cdl_option CYGPKG_HAL_BUILD_COMPILER_TESTS {
2697 # No user value, uncomment the following line to provide one.
2699 # value_source default
2702 # The following properties are affected by this value
2703 # component CYGPKG_HAL_TESTS
2704 # Calculated: "tests/context tests/basic"
2705 # . ((!CYGINT_HAL_TESTS_NO_CACHES) ? " tests/cache" : "")
2706 # . ((CYGPKG_HAL_BUILD_COMPILER_TESTS) ? " tests/cpp1 tests/vaargs" : "")
2707 # . ((!CYGVAR_KERNEL_COUNTERS_CLOCK) ? " tests/intr" : "")
2711 # This option specifies the set of tests for the common HAL.
2713 cdl_component CYGPKG_HAL_TESTS {
2714 # Calculated value: "tests/context tests/basic"
2715 # . ((!CYGINT_HAL_TESTS_NO_CACHES) ? " tests/cache" : "")
2716 # . ((CYGPKG_HAL_BUILD_COMPILER_TESTS) ? " tests/cpp1 tests/vaargs" : "")
2717 # . ((!CYGVAR_KERNEL_COUNTERS_CLOCK) ? " tests/intr" : "")
2718 # CYGINT_HAL_TESTS_NO_CACHES == 0
2719 # CYGPKG_HAL_BUILD_COMPILER_TESTS == 0
2720 # CYGVAR_KERNEL_COUNTERS_CLOCK (unknown) == 0
2722 # Current_value: tests/context tests/basic tests/cache tests/intr
2726 # Interface for cache presence
2727 # Some architectures and/or platforms do not have caches. By
2728 # implementing this interface, these can disable the various
2729 # cache-related tests.
2731 cdl_interface CYGINT_HAL_TESTS_NO_CACHES {
2732 # No options implement this inferface
2733 # This value cannot be modified here.
2735 # Current value: 0 0
2737 # The following properties are affected by this value
2738 # component CYGPKG_HAL_TESTS
2739 # Calculated: "tests/context tests/basic"
2740 # . ((!CYGINT_HAL_TESTS_NO_CACHES) ? " tests/cache" : "")
2741 # . ((CYGPKG_HAL_BUILD_COMPILER_TESTS) ? " tests/cpp1 tests/vaargs" : "")
2742 # . ((!CYGVAR_KERNEL_COUNTERS_CLOCK) ? " tests/intr" : "")
2747 # The ARM architecture HAL package provides generic
2748 # support for this processor architecture. It is also
2749 # necessary to select a specific target platform HAL
2752 cdl_package CYGPKG_HAL_ARM {
2753 # Packages cannot be added or removed, nor can their version be changed,
2754 # simply by editing their value. Instead the appropriate configuration
2755 # should be used to perform these actions.
2757 # This value cannot be modified here.
2759 # Current value: 1 current
2761 # The following properties are affected by this value
2762 # component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
2763 # ActiveIf: CYGPKG_HAL_ARM || CYGPKG_HAL_POWERPC_MPC8xx || CYGPKG_HAL_V85X_V850 || CYGSEM_HAL_VIRTUAL_VECTOR_DIAG
2764 # interface CYGINT_REDBOOT_ARM_FLASH_SIB_SUPPORTED
2765 # ActiveIf: CYGPKG_HAL_ARM
2769 # The CPU architecture supports THUMB mode
2771 cdl_interface CYGINT_HAL_ARM_THUMB_ARCH {
2772 # No options implement this inferface
2773 # This value cannot be modified here.
2777 # The following properties are affected by this value
2778 # option CYGHWR_THUMB
2779 # ActiveIf: CYGINT_HAL_ARM_THUMB_ARCH != 0
2780 # option CYGBLD_ARM_ENABLE_THUMB_INTERWORK
2781 # ActiveIf: CYGINT_HAL_ARM_THUMB_ARCH != 0
2784 # Enable Thumb instruction set
2785 # Enable use of the Thumb instruction set.
2787 cdl_option CYGHWR_THUMB {
2788 # This option is not active
2789 # ActiveIf constraint: CYGINT_HAL_ARM_THUMB_ARCH != 0
2790 # CYGINT_HAL_ARM_THUMB_ARCH == 0
2794 # No user value, uncomment the following line to provide one.
2796 # value_source default
2799 # The following properties are affected by this value
2800 # option CYGBLD_ARM_ENABLE_THUMB_INTERWORK
2801 # DefaultValue: (CYGHWR_THUMB || CYGSEM_HAL_ROM_MONITOR)
2804 # Enable Thumb interworking compiler option
2805 # This option controls the use of -mthumb-interwork in the
2806 # compiler flags. It defaults enabled in Thumb or ROM monitor
2807 # configurations, but can be overridden for reduced memory
2808 # footprint where interworking is not a requirement.
2810 cdl_option CYGBLD_ARM_ENABLE_THUMB_INTERWORK {
2811 # This option is not active
2812 # ActiveIf constraint: CYGINT_HAL_ARM_THUMB_ARCH != 0
2813 # CYGINT_HAL_ARM_THUMB_ARCH == 0
2817 # No user value, uncomment the following line to provide one.
2819 # value_source default
2820 # Default value: (CYGHWR_THUMB || CYGSEM_HAL_ROM_MONITOR)
2822 # CYGSEM_HAL_ROM_MONITOR == 1
2826 # The platform and architecture supports Big Endian operation
2828 cdl_interface CYGINT_HAL_ARM_BIGENDIAN {
2829 # No options implement this inferface
2830 # This value cannot be modified here.
2834 # The following properties are affected by this value
2835 # option CYGHWR_HAL_ARM_BIGENDIAN
2836 # ActiveIf: CYGINT_HAL_ARM_BIGENDIAN != 0
2839 # Use big-endian mode
2840 # Use the CPU in big-endian mode.
2842 cdl_option CYGHWR_HAL_ARM_BIGENDIAN {
2843 # This option is not active
2844 # ActiveIf constraint: CYGINT_HAL_ARM_BIGENDIAN != 0
2845 # CYGINT_HAL_ARM_BIGENDIAN == 0
2849 # No user value, uncomment the following line to provide one.
2851 # value_source default
2855 # The platform uses a processor with an ARM7 core
2857 cdl_interface CYGINT_HAL_ARM_ARCH_ARM7 {
2858 # No options implement this inferface
2859 # This value cannot be modified here.
2863 # The following properties are affected by this value
2864 # option CYGHWR_HAL_ARM_CPU_FAMILY
2865 # LegalValues: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" : ""
2866 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" : ""
2867 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" : ""
2868 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" : ""
2870 # option CYGHWR_HAL_ARM_CPU_FAMILY
2871 # DefaultValue: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" :
2872 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" :
2873 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" :
2874 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" :
2878 # The platform uses a processor with an ARM9 core
2880 cdl_interface CYGINT_HAL_ARM_ARCH_ARM9 {
2881 # Implemented by CYGPKG_HAL_ARM_MX53, active, enabled
2882 # This value cannot be modified here.
2886 # The following properties are affected by this value
2887 # option CYGHWR_HAL_ARM_CPU_FAMILY
2888 # LegalValues: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" : ""
2889 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" : ""
2890 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" : ""
2891 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" : ""
2893 # option CYGHWR_HAL_ARM_CPU_FAMILY
2894 # DefaultValue: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" :
2895 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" :
2896 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" :
2897 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" :
2901 # The platform uses a processor with a StrongARM core
2903 cdl_interface CYGINT_HAL_ARM_ARCH_STRONGARM {
2904 # No options implement this inferface
2905 # This value cannot be modified here.
2909 # The following properties are affected by this value
2910 # option CYGHWR_HAL_ARM_CPU_FAMILY
2911 # LegalValues: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" : ""
2912 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" : ""
2913 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" : ""
2914 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" : ""
2916 # option CYGHWR_HAL_ARM_CPU_FAMILY
2917 # DefaultValue: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" :
2918 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" :
2919 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" :
2920 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" :
2924 # The platform uses a processor with a XScale core
2926 cdl_interface CYGINT_HAL_ARM_ARCH_XSCALE {
2927 # No options implement this inferface
2928 # This value cannot be modified here.
2932 # The following properties are affected by this value
2933 # option CYGHWR_HAL_ARM_CPU_FAMILY
2934 # LegalValues: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" : ""
2935 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" : ""
2936 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" : ""
2937 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" : ""
2939 # option CYGHWR_HAL_ARM_CPU_FAMILY
2940 # DefaultValue: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" :
2941 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" :
2942 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" :
2943 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" :
2948 # It is possible to optimize code for different
2949 # ARM CPU families. This option selects which CPU to
2950 # optimize for on boards that support multiple CPU types.
2952 cdl_option CYGHWR_HAL_ARM_CPU_FAMILY {
2954 # No user value, uncomment the following line to provide one.
2956 # value_source default
2957 # Default value: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" :
2958 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" :
2959 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" :
2960 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" :
2962 # CYGINT_HAL_ARM_ARCH_ARM7 == 0
2963 # CYGINT_HAL_ARM_ARCH_ARM9 == 1
2964 # CYGINT_HAL_ARM_ARCH_STRONGARM == 0
2965 # CYGINT_HAL_ARM_ARCH_XSCALE == 0
2967 # Legal values: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" : ""
2968 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" : ""
2969 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" : ""
2970 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" : ""
2972 # CYGINT_HAL_ARM_ARCH_ARM7 == 0
2973 # CYGINT_HAL_ARM_ARCH_ARM9 == 1
2974 # CYGINT_HAL_ARM_ARCH_STRONGARM == 0
2975 # CYGINT_HAL_ARM_ARCH_XSCALE == 0
2978 # Provide diagnostic dump for exceptions
2979 # Print messages about hardware exceptions, including
2980 # raw exception frame dump and register contents.
2982 cdl_option CYGHWR_HAL_ARM_DUMP_EXCEPTIONS {
2984 # No user value, uncomment the following line to provide one.
2986 # value_source default
2988 # Requires: !CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2989 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
2993 # Process all exceptions with the eCos application
2994 # Normal RAM-based programs which do not include GDB stubs
2995 # defer processing of the illegal instruction exception to GDB.
2996 # Setting this options allows the program to explicitly handle
2997 # the illegal instruction exception itself. Note: this will
2998 # prevent the use of GDB to debug the application as breakpoints
2999 # will no longer work.
3001 cdl_option CYGIMP_HAL_PROCESS_ALL_EXCEPTIONS {
3003 # No user value, uncomment the following line to provide one.
3005 # value_source default
3009 # Support GDB thread operations via ICE/Multi-ICE
3010 # Allow GDB to get thread information via the ICE/Multi-ICE
3013 cdl_option CYGHWR_HAL_ARM_ICE_THREAD_SUPPORT {
3015 # No user value, uncomment the following line to provide one.
3017 # value_source default
3019 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
3020 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
3022 # Requires: CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT
3023 # CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT == 1
3025 # Requires: CYGDBG_KERNEL_DEBUG_GDB_THREAD_SUPPORT
3026 # CYGDBG_KERNEL_DEBUG_GDB_THREAD_SUPPORT (unknown) == 0
3030 # Support for 'gprof' callbacks
3031 # The ARM HAL provides the macro for 'gprof' callbacks from RedBoot
3032 # to acquire the interrupt-context PC and SP, when this option is
3035 cdl_option CYGOPT_HAL_ARM_SYSCALL_GPROF_SUPPORT {
3036 # This option is not active
3037 # ActiveIf constraint: CYGSEM_REDBOOT_BSP_SYSCALLS
3038 # CYGSEM_REDBOOT_BSP_SYSCALLS == 0
3040 # ActiveIf constraint: CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT || CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
3041 # CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT == 0
3042 # CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT == 0
3045 # Calculated value: 1
3050 # Accept exceptions and irq's occurring in user mode
3051 # For standalone Redboot based programs running in user mode.
3053 cdl_option CYGOPT_HAL_ARM_WITH_USER_MODE {
3055 # No user value, uncomment the following line to provide one.
3057 # value_source default
3061 # Preserve svc spsr before returning to svc mode
3062 # This option secures exception and breakpoint processing
3063 # triggered during execution of application specific SWI
3066 cdl_option CYGOPT_HAL_ARM_PRESERVE_SVC_SPSR {
3068 # No user value, uncomment the following line to provide one.
3070 # value_source default
3076 cdl_option CYGBLD_LINKER_SCRIPT {
3077 # Calculated value: "src/arm.ld"
3079 # Current_value: src/arm.ld
3082 # Implementations of hal_arm_mem_real_region_top()
3084 cdl_interface CYGINT_HAL_ARM_MEM_REAL_REGION_TOP {
3085 # No options implement this inferface
3086 # This value cannot be modified here.
3091 # Freescale SoC architecture
3092 # This HAL variant package provides generic
3093 # support for the Freescale SoC. It is also
3094 # necessary to select a specific target platform HAL
3097 cdl_package CYGPKG_HAL_ARM_MX53 {
3098 # Packages cannot be added or removed, nor can their version be changed,
3099 # simply by editing their value. Instead the appropriate configuration
3100 # should be used to perform these actions.
3102 # This value cannot be modified here.
3104 # Current value: 1 current
3106 # The following properties are affected by this value
3107 # option CYGOPT_HAL_ARM_MXC_FEC_MIIGSK
3108 # ActiveIf: CYGPKG_HAL_ARM_MX25 || CYGPKG_HAL_ARM_MX53
3109 # option CYGHWR_DEVS_FLASH_MMC_ESDHC
3110 # ActiveIf: CYGPKG_HAL_ARM_MX37 || CYGPKG_HAL_ARM_MX35 ||
3111 # CYGPKG_HAL_ARM_MX25 || CYGPKG_HAL_ARM_MX51 || CYGPKG_HAL_ARM_MX53
3115 # Processor clock rate
3116 # The processor can run at various frequencies.
3117 # These values are expressed in KHz. Note that there are
3118 # several steppings of the rate to run at different
3119 # maximum frequencies. Check the specs to make sure that your
3120 # particular processor can run at the rate you select here.
3122 cdl_option CYGHWR_HAL_ARM_SOC_PROCESSOR_CLOCK {
3123 # This option is not active
3124 # ActiveIf constraint: CYG_HAL_STARTUP == "ROM"
3125 # CYG_HAL_STARTUP == ROMRAM
3129 # No user value, uncomment the following line to provide one.
3131 # value_source default
3132 # Default value: CYGHWR_HAL_ARM_SOC_PROCESSOR_CLOCK_OVERRIDE_DEFAULT ?
3133 # CYGHWR_HAL_ARM_SOC_PROCESSOR_CLOCK_OVERRIDE_DEFAULT : 150000
3134 # CYGHWR_HAL_ARM_SOC_PROCESSOR_CLOCK_OVERRIDE_DEFAULT (unknown) == 0
3135 # CYGHWR_HAL_ARM_SOC_PROCESSOR_CLOCK_OVERRIDE_DEFAULT (unknown) == 0
3137 # Legal values: 150000 200000
3140 # Real-time clock constants
3142 cdl_component CYGNUM_HAL_RTC_CONSTANTS {
3143 # There is no associated value.
3147 # Real-time clock numerator
3149 cdl_option CYGNUM_HAL_RTC_NUMERATOR {
3150 # Calculated value: 1000000000
3152 # Current_value: 1000000000
3155 # Real-time clock denominator
3156 # This option selects the heartbeat rate for the real-time clock.
3157 # The rate is specified in ticks per second. Change this value
3158 # with caution - too high and your system will become saturated
3159 # just handling clock interrupts, too low and some operations
3160 # such as thread scheduling may become sluggish.
3162 cdl_option CYGNUM_HAL_RTC_DENOMINATOR {
3164 # No user value, uncomment the following line to provide one.
3166 # value_source default
3167 # Default value: 100
3169 # The following properties are affected by this value
3170 # option CYGNUM_HAL_RTC_PERIOD
3171 # Calculated: (3686400/CYGNUM_HAL_RTC_DENOMINATOR)
3174 # Real-time clock period
3176 cdl_option CYGNUM_HAL_RTC_PERIOD {
3177 # Calculated value: (3686400/CYGNUM_HAL_RTC_DENOMINATOR)
3178 # CYGNUM_HAL_RTC_DENOMINATOR == 100
3180 # Current_value: 36864
3184 # UART1 available as diagnostic/debug channel
3185 # The chip has multiple serial channels which may be
3186 # used for different things on different platforms. This
3187 # interface allows a platform to indicate that the specified
3188 # serial port can be used as a diagnostic and/or debug channel.
3190 cdl_interface CYGHWR_HAL_ARM_SOC_UART1 {
3191 # Implemented by CYGPKG_HAL_ARM_TX53KARO, active, enabled
3192 # This value cannot be modified here.
3196 # The following properties are affected by this value
3199 # UART2 available as diagnostic/debug channel
3200 # The chip has multiple serial channels which may be
3201 # used for different things on different platforms. This
3202 # interface allows a platform to indicate that the specified
3203 # serial port can be used as a diagnostic and/or debug channel.
3205 cdl_interface CYGHWR_HAL_ARM_SOC_UART2 {
3206 # Implemented by CYGPKG_HAL_ARM_TX53KARO, active, enabled
3207 # This value cannot be modified here.
3211 # The following properties are affected by this value
3214 # UART3 available as diagnostic/debug channel
3215 # The chip has multiple serial channels which may be
3216 # used for different things on different platforms. This
3217 # interface allows a platform to indicate that the specified
3218 # serial port can be used as a diagnostic and/or debug channel.
3220 cdl_interface CYGHWR_HAL_ARM_SOC_UART3 {
3221 # Implemented by CYGPKG_HAL_ARM_TX53KARO, active, enabled
3222 # This value cannot be modified here.
3226 # The following properties are affected by this value
3229 # UART4 available as diagnostic/debug channel
3230 # The chip has multiple serial channels which may be
3231 # used for different things on different platforms. This
3232 # interface allows a platform to indicate that the specified
3233 # serial port can be used as a diagnostic and/or debug channel.
3235 cdl_interface CYGHWR_HAL_ARM_SOC_UART4 {
3236 # Implemented by CYGPKG_HAL_ARM_TX53KARO, active, enabled
3237 # This value cannot be modified here.
3241 # The following properties are affected by this value
3244 # UART5 available as diagnostic/debug channel
3245 # The chip has multiple serial channels which may be
3246 # used for different things on different platforms. This
3247 # interface allows a platform to indicate that the specified
3248 # serial port can be used as a diagnostic and/or debug channel.
3250 cdl_interface CYGHWR_HAL_ARM_SOC_UART5 {
3251 # No options implement this inferface
3252 # This value cannot be modified here.
3258 # This HAL platform package provides generic
3259 # support for the Ka-Ro electronics TX53 module.
3261 cdl_package CYGPKG_HAL_ARM_TX53KARO {
3262 # Packages cannot be added or removed, nor can their version be changed,
3263 # simply by editing their value. Instead the appropriate configuration
3264 # should be used to perform these actions.
3266 # This value cannot be modified here.
3268 # Current value: 1 current
3269 # Requires: CYGINT_ISO_CTYPE
3270 # CYGINT_ISO_CTYPE == 1
3272 # Requires: CYGBLD_BUILD_REDBOOT == 1
3273 # CYGBLD_BUILD_REDBOOT == 1
3279 # The only startup type allowed is ROMRAM, since this will allow
3280 # the program to exist in ROM, but be copied to RAM during startup
3281 # which is required to boot from NAND flash.
3283 cdl_component CYG_HAL_STARTUP {
3285 # No user value, uncomment the following line to provide one.
3287 # value_source default
3288 # Default value: ROMRAM
3289 # Legal values: "ROMRAM" "RAM"
3291 # The following properties are affected by this value
3292 # option CYGSEM_HAL_ROM_MONITOR
3293 # Requires: CYG_HAL_STARTUP == "ROM" || CYG_HAL_STARTUP == "ROMRAM"
3294 # option CYGSEM_HAL_ROM_MONITOR
3295 # Requires: CYG_HAL_STARTUP == "ROM" || CYG_HAL_STARTUP == "ROMRAM"
3296 # option CYGSEM_HAL_USE_ROM_MONITOR
3297 # DefaultValue: CYG_HAL_STARTUP == "RAM" ? "GDB_stubs" : 0
3298 # option CYGSEM_HAL_USE_ROM_MONITOR
3299 # Requires: CYG_HAL_STARTUP == "RAM"
3300 # option CYGHWR_HAL_ARM_SOC_PROCESSOR_CLOCK
3301 # ActiveIf: CYG_HAL_STARTUP == "ROM"
3302 # option CYGSEM_HAL_INSTALL_MMU_TABLES
3303 # DefaultValue: CYG_HAL_STARTUP != "RAM"
3304 # component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
3305 # DefaultValue: (CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS || CYG_HAL_STARTUP == "RAM") ? 1 : 0
3306 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
3307 # DefaultValue: CYG_HAL_STARTUP != "RAM" || !CYGSEM_HAL_USE_ROM_MONITOR
3308 # option CYGBLD_BUILD_REDBOOT_WITH_THREADS
3309 # ActiveIf: CYG_HAL_STARTUP != "RAM"
3310 # option CYGPRI_REDBOOT_ROM_MONITOR
3311 # ActiveIf: CYG_HAL_STARTUP == "ROM" || CYG_HAL_STARTUP == "ROMRAM"
3312 # option CYGPRI_REDBOOT_ROM_MONITOR
3313 # ActiveIf: CYG_HAL_STARTUP == "ROM" || CYG_HAL_STARTUP == "ROMRAM"
3316 # Diagnostic serial port baud rate
3317 # This option selects the baud rate used for the console port.
3318 # Note: this should match the value chosen for the GDB port if the
3319 # console and GDB port are the same.
3321 cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_BAUD {
3323 # No user value, uncomment the following line to provide one.
3325 # value_source default
3326 # Default value: 115200
3327 # Legal values: 9600 19200 38400 57600 115200
3330 # GDB serial port baud rate
3331 # This option selects the baud rate used for the GDB port.
3332 # Note: this should match the value chosen for the console port if the
3333 # console and GDB port are the same.
3335 cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_BAUD {
3337 # No user value, uncomment the following line to provide one.
3339 # value_source default
3340 # Default value: 115200
3341 # Legal values: 9600 19200 38400 57600 115200
3344 # Number of communication channels on the TX53
3346 cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS {
3347 # Calculated value: 5
3351 # The following properties are affected by this value
3352 # option CYGNUM_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL
3353 # LegalValues: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
3354 # option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_DEFAULT
3355 # LegalValues: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
3356 # option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL
3357 # LegalValues: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
3361 # The TX53 provides access to five serial ports. This option
3362 # chooses which port will be used to connect to a host
3365 cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL {
3366 # ActiveIf constraint: CYGPRI_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_CONFIGURABLE
3367 # CYGPRI_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_CONFIGURABLE == 1
3371 # No user value, uncomment the following line to provide one.
3373 # value_source default
3375 # Legal values: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
3376 # CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS == 5
3379 # Default console channel.
3381 cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_DEFAULT {
3382 # Calculated value: 0
3385 # Legal values: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
3386 # CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS == 5
3388 # The following properties are affected by this value
3389 # option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL
3390 # DefaultValue: CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_DEFAULT
3393 # Console serial port
3394 # The TX53 provides access to three serial ports. This option
3395 # chooses which port will be used for console output.
3397 cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL {
3398 # ActiveIf constraint: CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE
3399 # CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE == 1
3403 # No user value, uncomment the following line to provide one.
3405 # value_source default
3406 # Default value: CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_DEFAULT
3407 # CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_DEFAULT == 0
3409 # Legal values: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
3410 # CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS == 5
3413 # Ka-Ro electronics TX53 module build options
3414 # Package specific build options including control over
3415 # compiler flags used only in building this package,
3416 # and details of which tests are built.
3418 cdl_component CYGPKG_HAL_ARM_TX53_OPTIONS {
3419 # There is no associated value.
3420 # Requires: CYGBLD_REDBOOT_FLASH_BOOT_OFFSET == 0
3421 # CYGBLD_REDBOOT_FLASH_BOOT_OFFSET == 0
3427 # This option specifies the SDRAM type of the TX53 module.
3428 # Valid options are '2' for DDR2 and '3' for DDR3.
3430 cdl_option CYGNUM_HAL_ARM_TX53_SDRAM_TYPE {
3432 # No user value, uncomment the following line to provide one.
3434 # value_source default
3438 # The following properties are affected by this value
3439 # component CYGHWR_HAL_ARM_TX53_DDR2_OPTIONS
3440 # ActiveIf: CYGNUM_HAL_ARM_TX53_SDRAM_TYPE == 2
3441 # component CYGHWR_HAL_ARM_TX53_DDR3_OPTIONS
3442 # ActiveIf: CYGNUM_HAL_ARM_TX53_SDRAM_TYPE == 3
3446 # This option specifies the SDRAM size of the TX53 module.
3448 cdl_option CYGNUM_HAL_ARM_TX53_SDRAM_SIZE {
3450 # No user value, uncomment the following line to provide one.
3451 # user_value 0x20000000
3452 # value_source default
3453 # Default value: 0x20000000
3454 # Legal values: 0x40000000 0x20000000
3458 # This option specifies the CPU clock in MHz of the TX51 module.
3460 cdl_option CYGNUM_HAL_ARM_TX53_CPU_CLK {
3464 # Default value: 1000
3465 # Legal values: 800 1000
3468 # Enable low level debugging with LED
3469 # This option enables low level debugging by blink codes
3470 # of the LED on STK5.
3472 cdl_option CYGOPT_HAL_ARM_TX53_DEBUG {
3474 # No user value, uncomment the following line to provide one.
3476 # value_source default
3477 # Default value: false
3478 # false (unknown) == 0
3482 # Additional compiler flags
3483 # This option modifies the set of compiler flags for
3484 # building the TX53 HAL. These flags are used in addition
3485 # to the set of global flags.
3487 cdl_option CYGPKG_HAL_ARM_TX53_CFLAGS_ADD {
3489 # No user value, uncomment the following line to provide one.
3491 # value_source default
3495 # Suppressed compiler flags
3496 # This option modifies the set of compiler flags for
3497 # building the TX53 HAL. These flags are removed from
3498 # the set of global flags if present.
3500 cdl_option CYGPKG_HAL_ARM_TX53_CFLAGS_REMOVE {
3502 # No user value, uncomment the following line to provide one.
3504 # value_source default
3508 # Show a splash screen from the FIS partition: 'logo'
3509 # When this option is enabled, RedBoot will look for a flash partition
3510 # named 'logo' and display the contents of this partition as initial
3513 cdl_option CYGHWR_MX53_LCD_LOGO {
3514 # ActiveIf constraint: CYGPKG_DEVS_IMX_IPU
3515 # CYGPKG_DEVS_IMX_IPU == current
3519 # No user value, uncomment the following line to provide one.
3521 # value_source default
3526 # Options for DDR2 SDRAM
3528 cdl_component CYGHWR_HAL_ARM_TX53_DDR2_OPTIONS {
3529 # ActiveIf constraint: CYGNUM_HAL_ARM_TX53_SDRAM_TYPE == 2
3530 # CYGNUM_HAL_ARM_TX53_SDRAM_TYPE == 2
3533 # There is no associated value.
3538 # This option specifies the SDRAM clock im MHz of the TX53 module.
3540 cdl_option CYGNUM_HAL_ARM_TX53_DDR2_CLK {
3544 # Default value: 400
3545 # Legal values: 216 266 333 400
3549 # Options for DDR3 SDRAM
3551 cdl_component CYGHWR_HAL_ARM_TX53_DDR3_OPTIONS {
3552 # This option is not active
3553 # ActiveIf constraint: CYGNUM_HAL_ARM_TX53_SDRAM_TYPE == 3
3554 # CYGNUM_HAL_ARM_TX53_SDRAM_TYPE == 2
3557 # There is no associated value.
3562 # This option specifies the SDRAM clock im MHz of the TX53 module.
3564 cdl_option CYGNUM_HAL_ARM_TX53_DDR3_CLK {
3565 # This option is not active
3566 # The parent CYGHWR_HAL_ARM_TX53_DDR3_OPTIONS is not active
3569 # No user value, uncomment the following line to provide one.
3571 # value_source default
3572 # Default value: 333
3579 cdl_component CYGHWR_MEMORY_LAYOUT {
3580 # Calculated value: "arm_tx53_romram"
3582 # Current_value: arm_tx53_romram
3586 # Memory layout linker script fragment
3588 cdl_option CYGHWR_MEMORY_LAYOUT_LDI {
3589 # Calculated value: "<pkgconf/mlt_arm_tx53_romram.ldi>"
3591 # Current_value: <pkgconf/mlt_arm_tx53_romram.ldi>
3594 # Memory layout header file
3596 cdl_option CYGHWR_MEMORY_LAYOUT_H {
3597 # Calculated value: "<pkgconf/mlt_arm_tx53_romram.h>"
3599 # Current_value: <pkgconf/mlt_arm_tx53_romram.h>
3608 # Common types and useful macros.
3609 # Tracing and assertion facilities.
3610 # Package startup options.
3612 cdl_package CYGPKG_INFRA {
3613 # Packages cannot be added or removed, nor can their version be changed,
3614 # simply by editing their value. Instead the appropriate configuration
3615 # should be used to perform these actions.
3617 # This value cannot be modified here.
3619 # Current value: 1 current
3621 # The following properties are affected by this value
3622 # package CYGPKG_HAL
3623 # Requires: CYGPKG_INFRA
3624 # component CYGBLD_BUILD_REDBOOT
3625 # Requires: CYGPKG_INFRA
3630 # The eCos source code contains a significant amount of
3631 # internal debugging support, in the form of assertions and
3633 # Assertions check at runtime that various conditions are as
3634 # expected; if not, execution is halted.
3635 # Tracing takes the form of text messages that are output
3636 # whenever certain events occur, or whenever functions are
3638 # The most important property of these checks and messages is
3639 # that they are not required for the program to run.
3640 # It is prudent to develop software with assertions enabled,
3641 # but disable them when making a product release, thus
3642 # removing the overhead of that checking.
3643 # It is possible to enable assertions and tracing
3645 # There are also options controlling the exact behaviour of
3646 # the assertion and tracing facilities, thus giving users
3647 # finer control over the code and data size requirements.
3649 cdl_component CYGPKG_INFRA_DEBUG {
3651 # No user value, uncomment the following line to provide one.
3653 # value_source default
3656 # The following properties are affected by this value
3657 # option CYGNUM_INFRA_EMPTY_DELETE_THRESHOLD
3658 # ActiveIf: CYGPKG_INFRA_DEBUG
3663 # If this option is defined, asserts in the code are tested.
3664 # Assert functions (CYG_ASSERT()) are defined in
3665 # 'include/cyg/infra/cyg_ass.h' within the 'install' tree.
3666 # If it is not defined, these result in no additional
3667 # object code and no checking of the asserted conditions.
3669 cdl_component CYGDBG_USE_ASSERTS {
3670 # This option is not active
3671 # The parent CYGPKG_INFRA_DEBUG is disabled
3674 # No user value, uncomment the following line to provide one.
3676 # value_source default
3678 # Requires: 1 == CYGINT_INFRA_DEBUG_TRACE_IMPL
3679 # CYGINT_INFRA_DEBUG_TRACE_IMPL == 0
3682 # The following properties are affected by this value
3683 # option CYGDBG_MEMALLOC_ALLOCATOR_DLMALLOC_DEBUG
3684 # Requires: CYGDBG_USE_ASSERTS
3685 # option CYGDBG_MEMALLOC_ALLOCATOR_DLMALLOC_DEBUG
3686 # DefaultValue: 0 != CYGDBG_USE_ASSERTS
3691 # This option allows individual control of preconditions.
3692 # A precondition is one type of assert, which it is
3693 # useful to control separately from more general asserts.
3694 # The function is CYG_PRECONDITION(condition,msg).
3696 cdl_option CYGDBG_INFRA_DEBUG_PRECONDITIONS {
3697 # This option is not active
3698 # The parent CYGDBG_USE_ASSERTS is not active
3701 # No user value, uncomment the following line to provide one.
3703 # value_source default
3708 # This option allows individual control of postconditions.
3709 # A postcondition is one type of assert, which it is
3710 # useful to control separately from more general asserts.
3711 # The function is CYG_POSTCONDITION(condition,msg).
3713 cdl_option CYGDBG_INFRA_DEBUG_POSTCONDITIONS {
3714 # This option is not active
3715 # The parent CYGDBG_USE_ASSERTS is not active
3718 # No user value, uncomment the following line to provide one.
3720 # value_source default
3725 # This option allows individual control of loop invariants.
3726 # A loop invariant is one type of assert, which it is
3727 # useful to control separately from more general asserts,
3728 # particularly since a loop invariant is typically evaluated
3729 # a great many times when used correctly.
3730 # The function is CYG_LOOP_INVARIANT(condition,msg).
3732 cdl_option CYGDBG_INFRA_DEBUG_LOOP_INVARIANTS {
3733 # This option is not active
3734 # The parent CYGDBG_USE_ASSERTS is not active
3737 # No user value, uncomment the following line to provide one.
3739 # value_source default
3744 # All assertions within eCos contain a text message
3745 # which should give some information about the condition
3747 # These text messages will end up being embedded in the
3748 # application image and hence there is a significant penalty
3749 # in terms of image size.
3750 # It is possible to suppress the use of these messages by
3751 # disabling this option.
3752 # This results in smaller code size, but there is less
3753 # human-readable information if an assertion actually gets
3756 cdl_option CYGDBG_INFRA_DEBUG_ASSERT_MESSAGE {
3757 # This option is not active
3758 # The parent CYGDBG_USE_ASSERTS is not active
3761 # No user value, uncomment the following line to provide one.
3763 # value_source default
3769 # If this option is defined, tracing operations
3770 # result in output or logging, depending on other options.
3771 # This may have adverse effects on performance, if the time
3772 # taken to output message overwhelms the available CPU
3773 # power or output bandwidth.
3774 # Trace functions (CYG_TRACE()) are defined in
3775 # 'include/cyg/infra/cyg_trac.h' within the 'install' tree.
3776 # If it is not defined, these result in no additional
3777 # object code and no trace information.
3779 cdl_component CYGDBG_USE_TRACING {
3780 # This option is not active
3781 # The parent CYGPKG_INFRA_DEBUG is disabled
3784 # No user value, uncomment the following line to provide one.
3786 # value_source default
3788 # Requires: 1 == CYGINT_INFRA_DEBUG_TRACE_IMPL
3789 # CYGINT_INFRA_DEBUG_TRACE_IMPL == 0
3792 # The following properties are affected by this value
3793 # option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_SIZE
3794 # ActiveIf: CYGDBG_USE_TRACING
3795 # option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_WRAP
3796 # ActiveIf: CYGDBG_USE_TRACING
3797 # option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_HALT
3798 # ActiveIf: CYGDBG_USE_TRACING
3799 # option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_PRINT
3800 # ActiveIf: CYGDBG_USE_TRACING
3801 # option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_PRINT_ON_ASSERT
3802 # ActiveIf: CYGDBG_USE_TRACING
3806 # Trace function reports
3807 # This option allows individual control of
3808 # function entry/exit tracing, independent of
3809 # more general tracing output.
3810 # This may be useful to remove clutter from a
3813 cdl_option CYGDBG_INFRA_DEBUG_FUNCTION_REPORTS {
3814 # This option is not active
3815 # The parent CYGDBG_USE_TRACING is not active
3816 # The parent CYGDBG_USE_TRACING is disabled
3819 # No user value, uncomment the following line to provide one.
3821 # value_source default
3826 # All trace calls within eCos contain a text message
3827 # which should give some information about the circumstances.
3828 # These text messages will end up being embedded in the
3829 # application image and hence there is a significant penalty
3830 # in terms of image size.
3831 # It is possible to suppress the use of these messages by
3832 # disabling this option.
3833 # This results in smaller code size, but there is less
3834 # human-readable information available in the trace output,
3835 # possibly only filenames and line numbers.
3837 cdl_option CYGDBG_INFRA_DEBUG_TRACE_MESSAGE {
3838 # This option is not active
3839 # The parent CYGDBG_USE_TRACING is not active
3840 # The parent CYGDBG_USE_TRACING is disabled
3843 # No user value, uncomment the following line to provide one.
3845 # value_source default
3850 # Trace output implementations
3852 cdl_interface CYGINT_INFRA_DEBUG_TRACE_IMPL {
3853 # Implemented by CYGDBG_INFRA_DEBUG_TRACE_ASSERT_NULL, inactive, disabled
3854 # Implemented by CYGDBG_INFRA_DEBUG_TRACE_ASSERT_SIMPLE, inactive, disabled
3855 # Implemented by CYGDBG_INFRA_DEBUG_TRACE_ASSERT_FANCY, inactive, disabled
3856 # Implemented by CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER, inactive, enabled
3857 # This option is not active
3858 # The parent CYGPKG_INFRA_DEBUG is disabled
3860 # This value cannot be modified here.
3864 # The following properties are affected by this value
3865 # component CYGDBG_USE_ASSERTS
3866 # Requires: 1 == CYGINT_INFRA_DEBUG_TRACE_IMPL
3867 # component CYGDBG_USE_TRACING
3868 # Requires: 1 == CYGINT_INFRA_DEBUG_TRACE_IMPL
3872 # A null output module which is useful when
3873 # debugging interactively; the output routines
3874 # can be breakpointed rather than have them actually
3875 # 'print' something.
3877 cdl_option CYGDBG_INFRA_DEBUG_TRACE_ASSERT_NULL {
3878 # This option is not active
3879 # The parent CYGPKG_INFRA_DEBUG is disabled
3882 # No user value, uncomment the following line to provide one.
3884 # value_source default
3889 # An output module which produces simple output
3890 # from tracing and assertion events.
3892 cdl_option CYGDBG_INFRA_DEBUG_TRACE_ASSERT_SIMPLE {
3893 # This option is not active
3894 # The parent CYGPKG_INFRA_DEBUG is disabled
3897 # No user value, uncomment the following line to provide one.
3899 # value_source default
3904 # An output module which produces fancy output
3905 # from tracing and assertion events.
3907 cdl_option CYGDBG_INFRA_DEBUG_TRACE_ASSERT_FANCY {
3908 # This option is not active
3909 # The parent CYGPKG_INFRA_DEBUG is disabled
3912 # No user value, uncomment the following line to provide one.
3914 # value_source default
3919 # An output module which buffers output
3920 # from tracing and assertion events. The stored
3921 # messages are output when an assert fires, or
3922 # CYG_TRACE_PRINT() (defined in <cyg/infra/cyg_trac.h>)
3924 # Of course, there will only be stored messages
3925 # if tracing per se (CYGDBG_USE_TRACING)
3928 cdl_component CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER {
3929 # This option is not active
3930 # The parent CYGPKG_INFRA_DEBUG is disabled
3933 # No user value, uncomment the following line to provide one.
3935 # value_source default
3941 # The size of the trace buffer. This counts the number
3942 # of trace records stored. When the buffer fills it
3943 # either wraps, stops recording, or generates output.
3945 cdl_option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_SIZE {
3946 # This option is not active
3947 # The parent CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER is not active
3948 # ActiveIf constraint: CYGDBG_USE_TRACING
3949 # CYGDBG_USE_TRACING == 0
3953 # No user value, uncomment the following line to provide one.
3955 # value_source default
3957 # Legal values: 5 to 65535
3960 # Wrap trace buffer when full
3961 # When the trace buffer has filled with records it
3962 # starts again at the beginning. Hence only the last
3963 # CYGDBG_INFRA_DEBUG_TRACE_BUFFER_SIZE messages will
3966 cdl_option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_WRAP {
3967 # This option is not active
3968 # The parent CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER is not active
3969 # ActiveIf constraint: CYGDBG_USE_TRACING
3970 # CYGDBG_USE_TRACING == 0
3974 # No user value, uncomment the following line to provide one.
3976 # value_source default
3980 # Halt trace buffer when full
3981 # When the trace buffer has filled with records it
3982 # stops recording. Hence only the first
3983 # CYGDBG_INFRA_DEBUG_TRACE_BUFFER_SIZE messages will
3986 cdl_option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_HALT {
3987 # This option is not active
3988 # The parent CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER is not active
3989 # ActiveIf constraint: CYGDBG_USE_TRACING
3990 # CYGDBG_USE_TRACING == 0
3994 # No user value, uncomment the following line to provide one.
3996 # value_source default
4000 # Print trace buffer when full
4001 # When the trace buffer has filled with records it
4002 # prints the contents of the buffer. The buffer is then
4003 # emptied and the system continues.
4005 cdl_option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_PRINT {
4006 # This option is not active
4007 # The parent CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER is not active
4008 # ActiveIf constraint: CYGDBG_USE_TRACING
4009 # CYGDBG_USE_TRACING == 0
4013 # No user value, uncomment the following line to provide one.
4015 # value_source default
4019 # Print trace buffer on assert fail
4020 # When an assertion fails the trace buffer will be
4021 # printed to the default diagnostic device.
4023 cdl_option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_PRINT_ON_ASSERT {
4024 # This option is not active
4025 # The parent CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER is not active
4026 # ActiveIf constraint: CYGDBG_USE_TRACING
4027 # CYGDBG_USE_TRACING == 0
4031 # No user value, uncomment the following line to provide one.
4033 # value_source default
4038 # Use function names
4039 # All trace and assert calls within eCos contain a
4040 # reference to the builtin macro '__PRETTY_FUNCTION__',
4041 # which evaluates to a string containing
4042 # the name of the current function.
4043 # This is useful when reading a trace log.
4044 # It is possible to suppress the use of the function name
4045 # by disabling this option.
4046 # This results in smaller code size, but there is less
4047 # human-readable information available in the trace output,
4048 # possibly only filenames and line numbers.
4050 cdl_option CYGDBG_INFRA_DEBUG_FUNCTION_PSEUDOMACRO {
4051 # This option is not active
4052 # The parent CYGPKG_INFRA_DEBUG is disabled
4055 # No user value, uncomment the following line to provide one.
4057 # value_source default
4063 # Some packages require a startup routine to be called.
4064 # This can be carried out by application code, by supplying
4065 # a routine called cyg_package_start() which calls the
4066 # appropriate package startup routine(s).
4067 # Alternatively, this routine can be constructed automatically
4068 # and configured to call the startup routines of your choice.
4070 cdl_component CYGPKG_INFRA_STARTUP {
4071 # There is no associated value.
4075 # Start uITRON subsystem
4076 # Generate a call to initialize the
4077 # uITRON compatibility subsystem
4078 # within the system version of cyg_package_start().
4079 # This enables compatibility with uITRON.
4080 # You must configure uITRON with the correct tasks before
4081 # starting the uItron subsystem.
4082 # If this is disabled, and you want to use uITRON,
4083 # you must call cyg_uitron_start() from your own
4084 # cyg_package_start() or cyg_userstart().
4086 cdl_option CYGSEM_START_UITRON_COMPATIBILITY {
4087 # This option is not active
4088 # ActiveIf constraint: CYGPKG_UITRON
4089 # CYGPKG_UITRON (unknown) == 0
4093 # No user value, uncomment the following line to provide one.
4095 # value_source default
4097 # Requires: CYGPKG_UITRON
4098 # CYGPKG_UITRON (unknown) == 0
4103 # Smaller slower memcpy()
4104 # Enabling this option causes the implementation of
4105 # the standard memcpy() routine to reduce code
4106 # size at the expense of execution speed. This
4107 # option is automatically enabled with the use of
4108 # the -Os option to the compiler. Also note that
4109 # the compiler will try to use its own builtin
4110 # version of memcpy() if possible, ignoring the
4111 # implementation in this package, unless given
4112 # the -fno-builtin compiler option.
4114 cdl_option CYGIMP_INFRA_PREFER_SMALL_TO_FAST_MEMCPY {
4116 # No user value, uncomment the following line to provide one.
4118 # value_source default
4122 # Smaller slower memset()
4123 # Enabling this option causes the implementation of
4124 # the standard memset() routine to reduce code
4125 # size at the expense of execution speed. This
4126 # option is automatically enabled with the use of
4127 # the -Os option to the compiler. Also note that
4128 # the compiler will try to use its own builtin
4129 # version of memset() if possible, ignoring the
4130 # implementation in this package, unless given
4131 # the -fno-builtin compiler option.
4133 cdl_option CYGIMP_INFRA_PREFER_SMALL_TO_FAST_MEMSET {
4135 # No user value, uncomment the following line to provide one.
4137 # value_source default
4141 # Provide empty C++ delete functions
4142 # To deal with virtual destructors, where the correct delete()
4143 # function must be called for the derived class in question, the
4144 # underlying delete is called when needed, from destructors. This
4145 # is regardless of whether the destructor is called by delete itself.
4146 # So there is a reference to delete() from all destructors. The
4147 # default builtin delete() attempts to call free() if there is
4148 # one defined. So, if you have destructors, and you have free(),
4149 # as in malloc() and free(), any destructor counts as a reference
4150 # to free(). So the dynamic memory allocation code is linked
4151 # in regardless of whether it gets explicitly called. This
4152 # increases code and data size needlessly.
4153 # To defeat this undesirable behaviour, we define empty versions
4154 # of delete and delete. But doing this prevents proper use
4155 # of dynamic memory in C++ programs via C++'s new and delete
4157 # Therefore, this option is provided
4158 # for explicitly disabling the provision of these empty functions,
4159 # so that new and delete can be used, if that is what is required.
4161 cdl_option CYGFUN_INFRA_EMPTY_DELETE_FUNCTIONS {
4163 # No user value, uncomment the following line to provide one.
4165 # value_source default
4169 # Threshold for valid number of delete calls
4170 # Some users don't know about the empty delete function and then
4171 # wonder why their C++ classes are leaking memory. If
4172 # INFRA_DEBUG is enabled we keep a counter for the number of
4173 # times delete is called. If it goes above this threshold we throw
4174 # an assertion failure. This should point heavy users of
4175 # delete in the right direction without upsetting those who want
4176 # an empty delete function.
4178 cdl_option CYGNUM_INFRA_EMPTY_DELETE_THRESHOLD {
4179 # This option is not active
4180 # ActiveIf constraint: CYGPKG_INFRA_DEBUG
4181 # CYGPKG_INFRA_DEBUG == 0
4185 # No user value, uncomment the following line to provide one.
4187 # value_source default
4188 # Default value: 100
4191 # Provide dummy abort() function
4192 # This option controls the inclusion of a dummy abort() function.
4193 # Parts of the C and C++ compiler runtime systems contain references
4194 # to abort(), particulary in the C++ exception handling code. It is
4195 # not possible to eliminate these references, so this dummy function
4196 # in included to satisfy them. It is not expected that this function
4197 # will ever be called, so its current behaviour is to simply loop.
4199 cdl_option CYGFUN_INFRA_DUMMY_ABORT {
4201 # No user value, uncomment the following line to provide one.
4203 # value_source default
4204 # Default value: CYGINT_ISO_EXIT == 0
4205 # CYGINT_ISO_EXIT == 0
4207 # Requires: !CYGINT_ISO_EXIT
4208 # CYGINT_ISO_EXIT == 0
4212 # Reset platform at end of test case execution
4213 # If this option is set then test case programs will reset the platform
4214 # when they terminate, as opposed to the default which is to just hang
4217 cdl_option CYGSEM_INFRA_RESET_ON_TEST_EXIT {
4219 # No user value, uncomment the following line to provide one.
4221 # value_source default
4225 # Provide dummy strlen() function
4226 # This option controls the inclusion of a dummy strlen() function.
4227 # Parts of the C and C++ compiler runtime systems contain references
4228 # to strlen(), particulary in the C++ exception handling code. It is
4229 # not possible to eliminate these references, so this dummy function
4230 # in included to satisfy them. While it is not expected that this function
4231 # will ever be called, it is functional but uses the simplest, smallest
4232 # algorithm. There is a faster version of strlen() in the C library.
4234 cdl_option CYGFUN_INFRA_DUMMY_STRLEN {
4236 # No user value, uncomment the following line to provide one.
4238 # value_source default
4239 # Default value: CYGINT_ISO_STRING_STRFUNCS == 0
4240 # CYGINT_ISO_STRING_STRFUNCS == 1
4242 # Requires: !CYGINT_ISO_STRING_STRFUNCS
4243 # CYGINT_ISO_STRING_STRFUNCS == 1
4247 # Make all compiler warnings show as errors
4248 # Enabling this option will cause all compiler warnings to show
4249 # as errors and bring the library build to a halt. This is used
4250 # to ensure that the code base is warning free, and thus ensure
4251 # that newly introduced warnings stand out and get fixed before
4252 # they show up as weird run-time behavior.
4254 cdl_option CYGBLD_INFRA_CFLAGS_WARNINGS_AS_ERRORS {
4259 # Requires: is_substr(CYGBLD_GLOBAL_CFLAGS, " -Werror")
4260 # CYGBLD_GLOBAL_CFLAGS == "-march=armv7-a -mfpu=fpa -mabi=apcs-gnu -Wall -Wno-pointer-sign -Wpointer-arith -Wstrict-prototypes -Wno-inline -Wundef -O2 -g -ffunction-sections -fdata-sections -fno-exceptions -fvtable-gc -finit-priority -Werror -pipe"
4263 # The following properties are affected by this value
4264 # option CYGBLD_GLOBAL_CFLAGS
4265 # Requires: CYGBLD_INFRA_CFLAGS_WARNINGS_AS_ERRORS
4268 # Make compiler and assembler communicate by pipe
4269 # Enabling this option will cause the compiler to feed the
4270 # assembly output the the assembler via a pipe instead of
4271 # via a temporary file. This normally reduces the build
4274 cdl_option CYGBLD_INFRA_CFLAGS_PIPE {
4279 # Requires: is_substr(CYGBLD_GLOBAL_CFLAGS, " -pipe")
4280 # CYGBLD_GLOBAL_CFLAGS == "-march=armv7-a -mfpu=fpa -mabi=apcs-gnu -Wall -Wno-pointer-sign -Wpointer-arith -Wstrict-prototypes -Wno-inline -Wundef -O2 -g -ffunction-sections -fdata-sections -fno-exceptions -fvtable-gc -finit-priority -Werror -pipe"
4284 # Infra build options
4285 # Package specific build options including control over
4286 # compiler flags used only in building this package.
4288 cdl_component CYGPKG_INFRA_OPTIONS {
4289 # There is no associated value.
4293 # Additional compiler flags
4294 # This option modifies the set of compiler flags for
4295 # building the eCos infra package. These flags are used
4296 # in addition to the set of global flags.
4298 cdl_option CYGPKG_INFRA_CFLAGS_ADD {
4300 # No user value, uncomment the following line to provide one.
4301 # user_value "-fno-rtti -Woverloaded-virtual"
4302 # value_source default
4303 # Default value: "-fno-rtti -Woverloaded-virtual"
4306 # Suppressed compiler flags
4307 # This option modifies the set of compiler flags for
4308 # building the eCos infra package. These flags are removed from
4309 # the set of global flags if present.
4311 cdl_option CYGPKG_INFRA_CFLAGS_REMOVE {
4313 # No user value, uncomment the following line to provide one.
4314 # user_value -Wno-pointer-sign
4315 # value_source default
4316 # Default value: -Wno-pointer-sign
4319 # Suppressed linker flags
4320 # This option modifies the set of linker flags for
4321 # building the eCos infra package tests. These flags are removed from
4322 # the set of global flags if present.
4324 cdl_option CYGPKG_INFRA_LDFLAGS_REMOVE {
4326 # No user value, uncomment the following line to provide one.
4327 # user_value -Wl,--gc-sections
4328 # value_source default
4329 # Default value: -Wl,--gc-sections
4332 # Additional linker flags
4333 # This option modifies the set of linker flags for
4334 # building the eCos infra package tests. These flags are added to
4335 # the set of global flags if present.
4337 cdl_option CYGPKG_INFRA_LDFLAGS_ADD {
4339 # No user value, uncomment the following line to provide one.
4340 # user_value -Wl,--fatal-warnings
4341 # value_source default
4342 # Default value: -Wl,--fatal-warnings
4345 # Infra package tests
4347 cdl_component CYGPKG_INFRA_TESTS {
4348 # Calculated value: "tests/cxxsupp tests/diag_sprintf1 tests/diag_sprintf2"
4350 # Current_value: tests/cxxsupp tests/diag_sprintf1 tests/diag_sprintf2
4354 # Number of times a test runs
4355 # This option controls the number of times tests will execute their
4356 # basic function. Not all tests will honor this setting, but those
4357 # that do will execute the test N times before terminating. A value
4358 # less than 0 indicates to run forever.
4360 cdl_option CYGNUM_TESTS_RUN_COUNT {
4362 # No user value, uncomment the following line to provide one.
4364 # value_source default
4371 # Redboot ROM monitor
4372 # doc: ref/redboot.html
4373 # This package supports the Redboot [stand-alone debug monitor]
4374 # using eCos as the underlying board support mechanism.
4376 cdl_package CYGPKG_REDBOOT {
4377 # Packages cannot be added or removed, nor can their version be changed,
4378 # simply by editing their value. Instead the appropriate configuration
4379 # should be used to perform these actions.
4381 # This value cannot be modified here.
4383 # Current value: 1 current
4384 # Requires: CYGIMP_HAL_COMMON_INTERRUPTS_USE_INTERRUPT_STACK == 0
4385 # CYGIMP_HAL_COMMON_INTERRUPTS_USE_INTERRUPT_STACK == 0
4388 # The following properties are affected by this value
4389 # component CYGPKG_REDBOOT_ARM_OPTIONS
4390 # ActiveIf: CYGPKG_REDBOOT
4391 # component CYGPKG_REDBOOT_HAL_OPTIONS
4392 # ActiveIf: CYGPKG_REDBOOT
4393 # component CYGPKG_REDBOOT_HAL_TX53_OPTIONS
4394 # ActiveIf: CYGPKG_REDBOOT
4395 # option CYGSEM_IO_ETH_DRIVERS_WARN
4396 # ActiveIf: CYGPKG_REDBOOT
4400 # Include support for ELF file format
4402 cdl_component CYGSEM_REDBOOT_ELF {
4404 # No user value, uncomment the following line to provide one.
4406 # value_source default
4411 # Use the virtual address in the ELF headers
4412 # The ELF headers contain both a virtual and a physical address
4413 # for where code/data should be loaded. By default the physical
4414 # address is used but sometimes it is necassary to use the
4415 # virtual address because of bugy toolchains
4417 cdl_option CYGOPT_REDBOOT_ELF_VIRTUAL_ADDRESS {
4419 # No user value, uncomment the following line to provide one.
4421 # value_source default
4426 # Methods of loading images using redboot
4428 cdl_interface CYGINT_REDBOOT_LOAD_METHOD {
4429 # Implemented by CYGBLD_BUILD_REDBOOT_WITH_XYZMODEM, active, enabled
4430 # Implemented by CYGPKG_REDBOOT_NETWORKING, active, enabled
4431 # This value cannot be modified here.
4435 # The following properties are affected by this value
4436 # component CYGBLD_BUILD_REDBOOT
4437 # Requires: CYGINT_REDBOOT_LOAD_METHOD
4440 # Build Redboot ROM ELF image
4441 # This option enables the building of the Redboot ELF image.
4442 # The image may require further relocation or symbol
4443 # stripping before being converted to a binary image.
4444 # This is handled by a rule in the target CDL.
4446 cdl_component CYGBLD_BUILD_REDBOOT {
4448 # No user value, uncomment the following line to provide one.
4450 # The inferred value should not be edited directly.
4452 # value_source inferred
4454 # Requires: CYGPKG_INFRA
4455 # CYGPKG_INFRA == current
4457 # Requires: CYGPKG_ISOINFRA
4458 # CYGPKG_ISOINFRA == current
4460 # Requires: ! CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
4461 # CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT == 0
4463 # Requires: ! CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT
4464 # CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT == 0
4466 # Requires: ! CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM
4467 # CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM == 0
4469 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT
4470 # CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT == 1
4472 # Requires: CYGINT_ISO_STRING_MEMFUNCS
4473 # CYGINT_ISO_STRING_MEMFUNCS == 1
4475 # Requires: CYGINT_ISO_STRING_STRFUNCS
4476 # CYGINT_ISO_STRING_STRFUNCS == 1
4478 # Requires: CYGINT_REDBOOT_LOAD_METHOD
4479 # CYGINT_REDBOOT_LOAD_METHOD == 2
4482 # The following properties are affected by this value
4483 # package CYGPKG_HAL_ARM_TX53KARO
4484 # Requires: CYGBLD_BUILD_REDBOOT == 1
4485 # option CYGBLD_BUILD_REDBOOT_BIN
4486 # ActiveIf: CYGBLD_BUILD_REDBOOT
4490 # Include GDB support in RedBoot
4491 # RedBoot normally includes support for the GDB debugging
4492 # protocols. This option allows this to be disabled which
4493 # may yield a substantial savings in terms of code and memory
4496 cdl_option CYGBLD_BUILD_REDBOOT_WITH_GDB {
4497 # ActiveIf constraint: CYGINT_HAL_DEBUG_GDB_STUBS
4498 # CYGINT_HAL_DEBUG_GDB_STUBS == 1
4503 # The inferred value should not be edited directly.
4507 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
4508 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
4510 # Requires: CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
4511 # CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT == 0
4515 # Threads debugging support
4516 # Enabling this option will include special code in the
4517 # GDB stubs to support debugging of threaded programs. In
4518 # the case of eCos programs, this support allows GDB to
4519 # have complete access to the eCos threads in the
4522 cdl_option CYGBLD_BUILD_REDBOOT_WITH_THREADS {
4523 # ActiveIf constraint: CYG_HAL_STARTUP != "RAM"
4524 # CYG_HAL_STARTUP == ROMRAM
4528 # No user value, uncomment the following line to provide one.
4530 # value_source default
4532 # Requires: CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT
4533 # CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT == 1
4537 # Customized version string
4538 # Use this option to define a customized version "string" for
4539 # RedBoot. Note: this value is only cosmetic, displayed by the
4540 # "version" command, but is useful for providing site specific
4541 # information about the RedBoot configuration.
4543 cdl_option CYGDAT_REDBOOT_CUSTOM_VERSION {
4545 # No user value, uncomment the following line to provide one.
4547 # The inferred value should not be edited directly.
4548 inferred_value 1 "Ka-Ro 2010-01-06"
4549 # value_source inferred
4550 # Default value: 0 0
4553 # Enable command line editing
4554 # If this option is non-zero, RedBoot will remember the
4555 # last N command lines. These lines may be reused.
4556 # Enabling this history will also enable rudimentary
4557 # editting of the lines themselves.
4559 cdl_option CYGNUM_REDBOOT_CMD_LINE_EDITING {
4561 # No user value, uncomment the following line to provide one.
4563 # value_source default
4566 # The following properties are affected by this value
4567 # option CYGSEM_REDBOOT_CMD_LINE_ANSI_SEQUENCES
4568 # ActiveIf: CYGNUM_REDBOOT_CMD_LINE_EDITING != 0
4569 # option CYGBLD_REDBOOT_CMD_LINE_HISTORY
4570 # Requires: CYGNUM_REDBOOT_CMD_LINE_EDITING > 0
4573 # Enable command line editing using ANSI arrows, etc
4574 # If this option is enabled, RedBoot will accept standard ANSI key
4575 # sequences for cursor movement (along with the emacs style keys).
4577 cdl_option CYGSEM_REDBOOT_CMD_LINE_ANSI_SEQUENCES {
4578 # ActiveIf constraint: CYGNUM_REDBOOT_CMD_LINE_EDITING != 0
4579 # CYGNUM_REDBOOT_CMD_LINE_EDITING == 16
4583 # No user value, uncomment the following line to provide one.
4585 # value_source default
4589 # Enable history command and expansion
4590 # Enabling this option will allow RedBoot to provide a
4591 # history command to list previous commands. Also enables
4592 # history expansion via '!' character similar to bash
4595 cdl_option CYGBLD_REDBOOT_CMD_LINE_HISTORY {
4597 # No user value, uncomment the following line to provide one.
4599 # value_source default
4601 # Requires: CYGNUM_REDBOOT_CMD_LINE_EDITING > 0
4602 # CYGNUM_REDBOOT_CMD_LINE_EDITING == 16
4606 # Number of unique RAM segments on platform
4607 # Change this option to be the number of memory segments which are
4608 # supported by the platform. If the value is greater than 1, then
4609 # a platform specific function must provide information about the
4610 # additional segments.
4612 cdl_option CYGBLD_REDBOOT_MAX_MEM_SEGMENTS {
4614 # No user value, uncomment the following line to provide one.
4616 # value_source default
4620 # Include support gzip/zlib decompression
4622 cdl_component CYGBLD_BUILD_REDBOOT_WITH_ZLIB {
4623 # ActiveIf constraint: CYGPKG_COMPRESS_ZLIB
4624 # CYGPKG_COMPRESS_ZLIB == current
4628 # No user value, uncomment the following line to provide one.
4630 # value_source default
4633 # The following properties are affected by this value
4634 # component CYGOPT_REDBOOT_FIS_ZLIB_COMMON_BUFFER
4635 # ActiveIf: CYGBLD_BUILD_REDBOOT_WITH_ZLIB && CYGOPT_REDBOOT_FIS
4639 # Size of zlib decompression buffer
4640 # This is the size of the buffer filled with incoming data
4641 # during load before calls are made to the decompressor
4642 # function. For ethernet downloads this can be made bigger
4643 # (at the cost of memory), but for serial downloads on slow
4644 # processors it may be necessary to reduce the size to
4645 # avoid serial overruns. zlib appears to bail out if less
4646 # than five bytes are available initially so this is the
4649 cdl_option CYGNUM_REDBOOT_LOAD_ZLIB_BUFFER {
4651 # No user value, uncomment the following line to provide one.
4653 # value_source default
4655 # Legal values: 5 to 256
4658 # Support compression of Flash images
4659 # This CDL indicates whether flash images can
4660 # be decompressed from gzip/zlib format into RAM.
4662 cdl_option CYGPRI_REDBOOT_ZLIB_FLASH {
4663 # ActiveIf constraint: CYGPKG_REDBOOT_FLASH
4664 # CYGPKG_REDBOOT_FLASH == 1
4666 # ActiveIf constraint: (!CYGSEM_IO_FLASH_READ_INDIRECT) || CYGPRI_REDBOOT_ZLIB_FLASH_FORCE
4667 # CYGSEM_IO_FLASH_READ_INDIRECT == 1
4668 # CYGPRI_REDBOOT_ZLIB_FLASH_FORCE == 1
4671 # Calculated value: 1
4676 # Include GZIP uncompress command
4677 # Enable this option to include a 'gunzip' command
4678 # to uncompress GZIP compressed data.
4680 cdl_option CYGBLD_BUILD_REDBOOT_WITH_GUNZIP {
4682 # No user value, uncomment the following line to provide one.
4684 # value_source default
4688 # Turn on CYGPRI_REDBOOT_ZLIB_FLASH
4689 # Force CYGPRI_REDBOOT_ZLIB_FLASH to be chosen
4691 cdl_option CYGPRI_REDBOOT_ZLIB_FLASH_FORCE {
4693 # No user value, uncomment the following line to provide one.
4695 # The inferred value should not be edited directly.
4697 # value_source inferred
4700 # The following properties are affected by this value
4701 # option CYGPRI_REDBOOT_ZLIB_FLASH
4702 # ActiveIf: (!CYGSEM_IO_FLASH_READ_INDIRECT) || CYGPRI_REDBOOT_ZLIB_FLASH_FORCE
4706 # Include support for xyzModem downloads
4707 # doc: ref/download-command.html
4709 cdl_option CYGBLD_BUILD_REDBOOT_WITH_XYZMODEM {
4711 # No user value, uncomment the following line to provide one.
4713 # value_source default
4716 # The following properties are affected by this value
4717 # option CYGPKG_REDBOOT_CFLAGS_ADD
4718 # ActiveIf: CYGBLD_BUILD_REDBOOT_WITH_XYZMODEM
4721 # Additional compiler flags
4722 # This option modifies the set of compiler flags for
4723 # building the eCos infra package. These flags are used
4724 # in addition to the set of global flags.
4726 cdl_option CYGPKG_REDBOOT_CFLAGS_ADD {
4727 # ActiveIf constraint: CYGBLD_BUILD_REDBOOT_WITH_XYZMODEM
4728 # CYGBLD_BUILD_REDBOOT_WITH_XYZMODEM == 1
4732 # No user value, uncomment the following line to provide one.
4733 # user_value -Wno-inline
4734 # value_source default
4735 # Default value: -Wno-inline
4738 # Allow the load-command write into Flash.
4739 # Write images direct to Flash via the load command.
4740 # We assume anything which is invalid RAM is flash, hence
4741 # the requires statement
4743 cdl_option CYGBLD_REDBOOT_LOAD_INTO_FLASH {
4744 # ActiveIf constraint: CYGPKG_REDBOOT_FLASH
4745 # CYGPKG_REDBOOT_FLASH == 1
4749 # No user value, uncomment the following line to provide one.
4751 # value_source default
4753 # Requires: CYGSEM_REDBOOT_VALIDATE_USER_RAM_LOADS
4754 # CYGSEM_REDBOOT_VALIDATE_USER_RAM_LOADS == 1
4758 # Include MS Windows CE support
4759 # doc: ref/wince.html
4760 # This option enables MS Windows CE EShell support
4761 # and Windows CE .BIN images support
4763 cdl_option CYGBLD_BUILD_REDBOOT_WITH_WINCE_SUPPORT {
4770 # Include support for MXC USB downloads
4772 cdl_option CYGBLD_BUILD_REDBOOT_WITH_MXCUSB {
4774 # No user value, uncomment the following line to provide one.
4776 # value_source default
4780 # Include support for i.MX USB OTG downloads
4782 cdl_option CYGBLD_BUILD_REDBOOT_WITH_IMXOTG {
4784 # No user value, uncomment the following line to provide one.
4786 # value_source default
4790 # Include POSIX checksum command
4791 # doc: ref/cksum-command.html
4793 cdl_option CYGBLD_BUILD_REDBOOT_WITH_CKSUM {
4795 # No user value, uncomment the following line to provide one.
4797 # value_source default
4801 # Include memory fill command
4802 # doc: ref/mfill-command.html
4804 cdl_option CYGBLD_BUILD_REDBOOT_WITH_MFILL {
4806 # No user value, uncomment the following line to provide one.
4808 # value_source default
4812 # Include memory compare command
4813 # doc: ref/mcmp-command.html
4815 cdl_option CYGBLD_BUILD_REDBOOT_WITH_MCMP {
4817 # No user value, uncomment the following line to provide one.
4819 # value_source default
4823 # Include memory copy command
4824 # doc: ref/mcopy-command.html
4826 cdl_option CYGBLD_BUILD_REDBOOT_WITH_MCOPY {
4828 # No user value, uncomment the following line to provide one.
4830 # value_source default
4834 # Include memory dump command
4835 # doc: ref/dump-command.html
4837 cdl_option CYGBLD_BUILD_REDBOOT_WITH_DUMP {
4839 # No user value, uncomment the following line to provide one.
4841 # value_source default
4845 # Include cache command
4846 # doc: ref/cache-command.html
4848 cdl_option CYGBLD_BUILD_REDBOOT_WITH_CACHES {
4850 # No user value, uncomment the following line to provide one.
4852 # value_source default
4856 # Include exec command
4857 # doc: ref/exec-command.html
4859 cdl_option CYGBLD_BUILD_REDBOOT_WITH_EXEC {
4861 # No user value, uncomment the following line to provide one.
4863 # value_source default
4866 # The following properties are affected by this value
4867 # component CYGPKG_REDBOOT_ARM_LINUX_EXEC
4868 # ActiveIf: CYGBLD_BUILD_REDBOOT_WITH_EXEC
4871 # Include I/O Memory commands 'iopeek' and 'iopoke'
4873 cdl_option CYGBLD_BUILD_REDBOOT_WITH_IOMEM {
4875 # No user value, uncomment the following line to provide one.
4877 # value_source default
4881 # Granularity of timer/ticks
4882 # This option controls the granularity of the timers.
4883 # Faster CPUs can afford higher granularity (lower values)
4884 # which should give higher network performance since the stack
4887 cdl_option CYGDBG_REDBOOT_TICK_GRANULARITY {
4889 # No user value, uncomment the following line to provide one.
4891 # value_source default
4892 # Default value: 250
4893 # Legal values: 10 25 50 100 250 500 1000
4896 # Redboot Networking
4897 # This option includes networking support in RedBoot.
4899 cdl_component CYGPKG_REDBOOT_NETWORKING {
4900 # ActiveIf constraint: CYGPKG_IO_ETH_DRIVERS
4901 # CYGPKG_IO_ETH_DRIVERS == current
4905 # No user value, uncomment the following line to provide one.
4907 # value_source default
4910 # The following properties are affected by this value
4911 # option CYGSEM_IO_ETH_DRIVERS_PASS_PACKETS
4912 # DefaultValue: 0 != CYGPKG_REDBOOT_NETWORKING
4916 # Print net debug information
4917 # This option is overriden by the configuration stored
4920 cdl_option CYGDBG_REDBOOT_NET_DEBUG {
4922 # No user value, uncomment the following line to provide one.
4924 # value_source default
4928 # Support TFTP for download
4929 # This option enables the use of the TFTP protocol for
4932 cdl_option CYGSEM_REDBOOT_NET_TFTP_DOWNLOAD {
4934 # No user value, uncomment the following line to provide one.
4936 # value_source default
4940 # Support HTTP for download
4941 # This option enables the use of the HTTP protocol for
4944 cdl_option CYGSEM_REDBOOT_NET_HTTP_DOWNLOAD {
4951 # Default IP address
4952 # This IP address is the default used by RedBoot if
4953 # a BOOTP/DHCP server does not respond. The numbers
4954 # should be separated by *commas*, and not dots. If
4955 # an IP address is configured into the Flash
4956 # configuration, that will be used in preference.
4958 cdl_component CYGDAT_REDBOOT_DEFAULT_IP_ADDR {
4960 # No user value, uncomment the following line to provide one.
4962 # value_source default
4963 # Default value: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "0, 0, 0, 0"
4964 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
4969 # Do not try to use BOOTP
4970 # By default Redboot tries to use BOOTP to get an IP
4971 # address. If there's no BOOTP server on your network
4972 # use this option to avoid to wait until the
4973 # timeout. This option is overriden by the
4974 # configuration stored in flash.
4976 cdl_option CYGSEM_REDBOOT_DEFAULT_NO_BOOTP {
4977 # This option is not active
4978 # The parent CYGDAT_REDBOOT_DEFAULT_IP_ADDR is disabled
4981 # No user value, uncomment the following line to provide one.
4983 # value_source default
4987 # Default bootp server
4988 # This IP address is the default server
4989 # address used by RedBoot if a BOOTP/DHCP
4990 # server does not respond. The numbers should
4991 # be separated by *commas*, and not dots. If
4992 # an IP address is configured into the Flash
4993 # configuration, that will be used in
4996 cdl_option CYGDAT_REDBOOT_DEFAULT_BOOTP_SERVER_IP_ADDR {
4997 # This option is not active
4998 # The parent CYGDAT_REDBOOT_DEFAULT_IP_ADDR is disabled
5001 # No user value, uncomment the following line to provide one.
5003 # value_source default
5004 # Default value: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "0, 0, 0, 0"
5005 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
5010 # Use DHCP to get IP information
5011 # Use DHCP protocol to obtain pertinent IP addresses, such
5012 # as the client, server, gateway, etc.
5014 cdl_component CYGSEM_REDBOOT_NETWORKING_DHCP {
5016 # No user value, uncomment the following line to provide one.
5018 # value_source default
5021 # The following properties are affected by this value
5022 # component CYGSEM_REDBOOT_NETWORKING_USE_GATEWAY
5023 # Requires: CYGSEM_REDBOOT_NETWORKING_DHCP
5026 # Use a gateway for non-local IP traffic
5027 # Enabling this option will allow the RedBoot networking
5028 # stack to use a [single] gateway to reach a non-local
5029 # IP address. If disabled, RedBoot will only be able to
5030 # reach nodes on the same subnet.
5032 cdl_component CYGSEM_REDBOOT_NETWORKING_USE_GATEWAY {
5034 # No user value, uncomment the following line to provide one.
5036 # value_source default
5038 # Requires: CYGSEM_REDBOOT_NETWORKING_DHCP
5039 # CYGSEM_REDBOOT_NETWORKING_DHCP == 1
5044 # Default gateway IP address
5045 # This IP address is the default used by RedBoot
5046 # if a BOOTP/DHCP server does not respond. The
5047 # numbers should be separated by *commas*, and
5048 # not dots. If an IP address is configured into
5049 # the Flash configuration, that will be used in
5052 cdl_component CYGDAT_REDBOOT_DEFAULT_GATEWAY_IP_ADDR {
5054 # No user value, uncomment the following line to provide one.
5056 # value_source default
5057 # Default value: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "0, 0, 0, 0"
5058 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
5062 # Default IP address mask
5063 # This IP address mask is the default used by
5064 # RedBoot if a BOOTP/DHCP server does not
5065 # respond. The numbers should be separated by
5066 # *commas*, and not dots. If an IP address is
5067 # configured into the Flash configuration, that
5068 # will be used in preference.
5070 cdl_component CYGDAT_REDBOOT_DEFAULT_IP_ADDR_MASK {
5072 # No user value, uncomment the following line to provide one.
5074 # value_source default
5075 # Default value: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "255, 255, 255, 0"
5076 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
5081 # TCP port to listen for incoming connections
5082 # RedBoot will 'listen' on this port for incoming TCP
5083 # connections. This allows outside connections to be made
5084 # to the platform, either for GDB or RedBoot commands.
5086 cdl_option CYGNUM_REDBOOT_NETWORKING_TCP_PORT {
5088 # No user value, uncomment the following line to provide one.
5090 # value_source default
5091 # Default value: 9000
5094 # Number of [network] packet buffers
5095 # RedBoot may need to buffer network data to support
5096 # various connections. This option allows control
5097 # over the number of such buffered packets, and in
5098 # turn, controls the amount of memory used by RedBoot
5099 # (which is not available to user applications).
5100 # Each packet buffer takes up about 1514 bytes.
5101 # Note: there is little need to make this larger than
5104 cdl_option CYGNUM_REDBOOT_NETWORKING_MAX_PKTBUF {
5106 # No user value, uncomment the following line to provide one.
5108 # value_source default
5110 # Legal values: 3 to 8
5114 # When this option is enabled, RedBoot will be built with
5115 # support for DNS, allowing use of hostnames on the command
5118 cdl_component CYGPKG_REDBOOT_NETWORKING_DNS {
5119 # This option is not active
5120 # ActiveIf constraint: CYGPKG_NS_DNS
5121 # CYGPKG_NS_DNS (unknown) == 0
5125 # No user value, uncomment the following line to provide one.
5127 # value_source default
5129 # Requires: !CYGPKG_NS_DNS_BUILD
5130 # CYGPKG_NS_DNS_BUILD (unknown) == 0
5136 # This option sets the IP of the default DNS. The IP can be
5137 # changed at runtime as well.
5139 cdl_option CYGPKG_REDBOOT_NETWORKING_DNS_IP {
5140 # This option is not active
5141 # The parent CYGPKG_REDBOOT_NETWORKING_DNS is not active
5142 # ActiveIf constraint: !CYGSEM_REDBOOT_FLASH_CONFIG
5143 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
5147 # No user value, uncomment the following line to provide one.
5148 # user_value 0.0.0.0
5149 # value_source default
5150 # Default value: 0.0.0.0
5153 # Timeout in DNS lookup
5154 # This option sets the timeout used when looking up an
5155 # address via the DNS. Default is 10 seconds.
5157 cdl_option CYGNUM_REDBOOT_NETWORKING_DNS_TIMEOUT {
5158 # This option is not active
5159 # The parent CYGPKG_REDBOOT_NETWORKING_DNS is not active
5162 # No user value, uncomment the following line to provide one.
5164 # value_source default
5168 # Support the use of a domain name
5169 # This option controls if Redboot supports domain
5170 # names when performing DNS lookups
5172 cdl_component CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN {
5173 # This option is not active
5174 # The parent CYGPKG_REDBOOT_NETWORKING_DNS is not active
5177 # No user value, uncomment the following line to provide one.
5179 # value_source default
5184 # Default DNS domain
5185 # This option sets the default DNS domain name.
5186 # This value will be overwritten by the value in
5187 # flash or a domain returned by DHCP
5189 cdl_option CYGPKG_REDBOOT_NETWORKING_DNS_DEFAULT_DOMAIN {
5190 # This option is not active
5191 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is not active
5192 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is disabled
5195 # No user value, uncomment the following line to provide one.
5197 # value_source default
5198 # Default value: 0 0
5201 # Get DNS domain from Flash
5202 # This option enables getting the domain name
5203 # from the flash configuration. This can later be
5204 # overwritten by a value learnt from DHCP
5206 cdl_option CYGPKG_REDBOOT_NETWORKING_DNS_FCONFIG_DOMAIN {
5207 # This option is not active
5208 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is not active
5209 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is disabled
5210 # ActiveIf constraint: CYGSEM_REDBOOT_FLASH_CONFIG
5211 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
5215 # No user value, uncomment the following line to provide one.
5217 # value_source default
5221 # Use DNS domain from DHCP
5222 # This option enables the use of the domain name
5225 cdl_option CYGPKG_REDBOOT_NETWORKING_DNS_DHCP_DOMAIN {
5226 # This option is not active
5227 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is not active
5228 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is disabled
5231 # No user value, uncomment the following line to provide one.
5233 # value_source default
5237 # BOOTP/DHCP DNS domain buffer size
5238 # This options sets the size of the static
5239 # buffer used by BOOTP/DHCP to store the DNS
5240 # domain name. The domain name will not be
5241 # set if the buffer is too small to hold it.
5243 cdl_option CYGNUM_REDBOOT_NETWORK_DNS_DOMAIN_BUFSIZE {
5244 # This option is not active
5245 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is not active
5246 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is disabled
5249 # No user value, uncomment the following line to provide one.
5251 # value_source default
5257 # Default network device driver
5258 # This is the name of the default network device to use.
5260 cdl_option CYGDAT_REDBOOT_DEFAULT_NETWORK_DEVICE {
5261 # This option is not active
5262 # ActiveIf constraint: CYGHWR_NET_DRIVERS > 1
5263 # CYGHWR_NET_DRIVERS == 1
5267 # No user value, uncomment the following line to provide one.
5269 # value_source default
5270 # Default value: "\"\""
5273 # Initialize only one net device
5274 # This option tells RedBoot to stop initializing network
5275 # devices when it finds the first device which is
5276 # successfully initialized. The default behavior causes
5277 # all network devices to be initialized.
5279 cdl_option CYGSEM_REDBOOT_NETWORK_INIT_ONE_DEVICE {
5280 # This option is not active
5281 # ActiveIf constraint: CYGHWR_NET_DRIVERS > 1
5282 # CYGHWR_NET_DRIVERS == 1
5286 # No user value, uncomment the following line to provide one.
5288 # value_source default
5293 # Let RedBoot use any I/O channel for its console.
5294 # If this option is enabled then RedBoot will attempt to use all
5295 # defined serial I/O channels for its console device. Once input
5296 # arrives at one of these channels then the console will use only
5299 cdl_option CYGPKG_REDBOOT_ANY_CONSOLE {
5301 # No user value, uncomment the following line to provide one.
5303 # The inferred value should not be edited directly.
5305 # value_source inferred
5309 # Let RedBoot adjust the baud rate of the serial console.
5310 # If this option is enabled then RedBoot will support commands
5311 # to set and query the baud rate on the selected console.
5313 cdl_option CYGSEM_REDBOOT_VARIABLE_BAUD_RATE {
5314 # ActiveIf constraint: CYGINT_HAL_VIRTUAL_VECTOR_COMM_BAUD_SUPPORT
5315 # CYGINT_HAL_VIRTUAL_VECTOR_COMM_BAUD_SUPPORT == 1
5319 # No user value, uncomment the following line to provide one.
5321 # value_source default
5325 # Run a platform specific startup function.
5326 # If this option is enabled then RedBoot will execute a platform
5327 # specific startup function before entering into its command line
5328 # processing. This allows the platform to perform any special
5329 # setups before RedBoot actually starts running. Note: the entire
5330 # RedBoot environment will already be initialized at this point.
5332 cdl_option CYGSEM_REDBOOT_PLF_STARTUP {
5334 # No user value, uncomment the following line to provide one.
5336 # value_source default
5340 # Run a platform specific ESA validation function.
5341 # If this option is enabled then RedBoot will execute a platform
5342 # specific function to validate an ethernet ESA. This would be
5343 # useful if the address must conform to standards set by the
5344 # hardware manufacturer, etc.
5346 cdl_option CYGSEM_REDBOOT_PLF_ESA_VALIDATE {
5348 # No user value, uncomment the following line to provide one.
5350 # The inferred value should not be edited directly.
5352 # value_source inferred
5355 # The following properties are affected by this value
5356 # component CYGPKG_DEVS_ETH_ARM_MXCBOARD_ETH0
5357 # Requires: CYGSEM_REDBOOT_PLF_ESA_VALIDATE
5358 # option CYGDAT_DEVS_ETH_ARM_TX53KARO_OUI
5359 # ActiveIf: CYGSEM_REDBOOT_PLF_ESA_VALIDATE
5362 # Maximum command line length
5363 # This option allows control over how long the CLI command line
5364 # should be. This space will be allocated statically
5365 # rather than from RedBoot's stack.
5367 cdl_option CYGPKG_REDBOOT_MAX_CMD_LINE {
5369 # No user value, uncomment the following line to provide one.
5371 # The inferred value should not be edited directly.
5373 # value_source inferred
5374 # Default value: 256
5377 # Command processing idle timeout (ms)
5378 # This option controls the timeout period before the
5379 # command processing is considered 'idle'. Making this
5380 # number smaller will cause idle processing to take place
5381 # more often, etc. The default value of 10ms is a reasonable
5382 # tradeoff between responsiveness and overhead.
5384 cdl_option CYGNUM_REDBOOT_CLI_IDLE_TIMEOUT {
5386 # No user value, uncomment the following line to provide one.
5388 # value_source default
5392 # Validate RAM addresses during load
5393 # This option controls whether or not RedBoot will make
5394 # sure that memory being used by the "load" command is
5395 # in fact in user RAM. Leaving the option enabled makes
5396 # for a safer environment, but this check may not be valid
5397 # on all platforms, thus the ability to disable it.
5398 # ** Disable this only with great care **
5400 cdl_option CYGSEM_REDBOOT_VALIDATE_USER_RAM_LOADS {
5402 # No user value, uncomment the following line to provide one.
5404 # value_source default
5407 # The following properties are affected by this value
5408 # option CYGBLD_REDBOOT_LOAD_INTO_FLASH
5409 # Requires: CYGSEM_REDBOOT_VALIDATE_USER_RAM_LOADS
5412 # Allow RedBoot to support FLASH programming
5413 # If this option is enabled then RedBoot will provide commands
5414 # to manage images in FLASH memory. These images can be loaded
5415 # into memory for execution or executed in place.
5417 cdl_component CYGPKG_REDBOOT_FLASH {
5418 # ActiveIf constraint: CYGHWR_IO_FLASH_DEVICE
5419 # CYGHWR_IO_FLASH_DEVICE == 1
5423 # No user value, uncomment the following line to provide one.
5425 # value_source default
5428 # The following properties are affected by this value
5429 # option CYGPRI_REDBOOT_ZLIB_FLASH
5430 # ActiveIf: CYGPKG_REDBOOT_FLASH
5431 # option CYGBLD_REDBOOT_LOAD_INTO_FLASH
5432 # ActiveIf: CYGPKG_REDBOOT_FLASH
5436 # Byte order used to store info in flash.
5437 # This option controls the byte ordering used to store
5438 # the FIS directory info and flash config info.
5440 cdl_option CYGOPT_REDBOOT_FLASH_BYTEORDER {
5442 # No user value, uncomment the following line to provide one.
5443 # user_value NATURAL
5444 # value_source default
5445 # Default value: NATURAL
5446 # Legal values: "NATURAL" "MSBFIRST" "LSBFIRST"
5449 # RedBoot Flash Image System support
5450 # doc: ref/flash-image-system.html
5451 # This option enables the Flash Image System commands
5452 # and support within RedBoot. If disabled, simple Flash
5453 # access commands such as "fis write" will still exist.
5454 # This option would be disabled for targets that need simple
5455 # FLASH manipulation, but do not have the need or space for
5456 # complete image management.
5458 cdl_option CYGOPT_REDBOOT_FIS {
5460 # No user value, uncomment the following line to provide one.
5462 # value_source default
5465 # The following properties are affected by this value
5466 # component CYGPKG_REDBOOT_FIS_CONTENTS
5467 # ActiveIf: CYGOPT_REDBOOT_FIS
5468 # option CYGSEM_REDBOOT_FLASH_COMBINED_FIS_AND_CONFIG
5469 # ActiveIf: CYGOPT_REDBOOT_FIS && (CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == "FLASH")
5470 # component CYGOPT_REDBOOT_FIS_ZLIB_COMMON_BUFFER
5471 # ActiveIf: CYGBLD_BUILD_REDBOOT_WITH_ZLIB && CYGOPT_REDBOOT_FIS
5474 # Max number of chunks of free space to manage
5475 # If this option is defined then "fis free" will
5476 # rely on the FIS directory to determine what space is
5477 # free within the FLASH. This option controls the
5478 # maximum number of free segment which can be handled
5479 # (typically this number is small). If this option is
5480 # not enabled, the the archaic behaviour of actually
5481 # scanning the FLASH for erased sectors (unreliable)
5482 # will be used to determine what's free and what's
5485 cdl_option CYGDAT_REDBOOT_FIS_MAX_FREE_CHUNKS {
5487 # No user value, uncomment the following line to provide one.
5489 # value_source default
5490 # Default value: 1 32
5493 # Flash Image System default directory contents
5495 cdl_component CYGPKG_REDBOOT_FIS_CONTENTS {
5496 # ActiveIf constraint: CYGOPT_REDBOOT_FIS
5497 # CYGOPT_REDBOOT_FIS == 1
5500 # Calculated value: 1
5506 # Flash block containing the Directory
5507 # Which block of flash should hold the directory
5508 # information. Positive numbers are absolute block
5509 # numbers. Negative block numbers count backwards
5510 # from the last block. eg 2 means block 2, -2
5511 # means the last but one block.
5513 cdl_option CYGNUM_REDBOOT_FIS_DIRECTORY_BLOCK {
5515 # No user value, uncomment the following line to provide one.
5517 # value_source default
5520 # The following properties are affected by this value
5521 # option CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK
5522 # Requires: CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK !=
5523 # CYGNUM_REDBOOT_FIS_DIRECTORY_BLOCK
5526 # Redundant Flash Image System Directory Support
5527 # This option enables the use of a redundant FIS
5528 # directory within RedBoot. If enabled a flash block
5529 # will be reserved for a second copy of the fis
5530 # directory. Doing this allow for power failure safe
5531 # updates of the directory by the application.
5533 cdl_component CYGOPT_REDBOOT_REDUNDANT_FIS {
5535 # No user value, uncomment the following line to provide one.
5537 # value_source default
5539 # Requires: 0 == CYGSEM_REDBOOT_FLASH_COMBINED_FIS_AND_CONFIG
5540 # CYGSEM_REDBOOT_FLASH_COMBINED_FIS_AND_CONFIG == 1
5545 # Flash block containing the backup Directory
5546 # Which block of flash should hold the redundant
5547 # directory information. Positive numbers are
5548 # absolute block numbers. Negative block numbers
5549 # count backwards from the last block. eg 2 means
5550 # block 2, -2 means the last but one block.
5552 cdl_option CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK {
5553 # This option is not active
5554 # The parent CYGOPT_REDBOOT_REDUNDANT_FIS is disabled
5557 # No user value, uncomment the following line to provide one.
5559 # value_source default
5561 # Requires: CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK !=
5562 # CYGNUM_REDBOOT_FIS_DIRECTORY_BLOCK
5563 # CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK == 0
5564 # CYGNUM_REDBOOT_FIS_DIRECTORY_BLOCK == -1
5567 # The following properties are affected by this value
5568 # option CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK
5569 # Requires: CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK !=
5570 # CYGNUM_REDBOOT_FIS_DIRECTORY_BLOCK
5574 # Pseudo-file to describe reserved area
5575 # If an area of FLASH is reserved, it is informative to
5576 # have a fis entry describing it. This option controls
5577 # creation of such an entry by default in the fis init
5580 cdl_option CYGOPT_REDBOOT_FIS_RESERVED_BASE {
5581 # This option is not active
5582 # ActiveIf constraint: 0 != CYGNUM_REDBOOT_FLASH_RESERVED_BASE
5583 # CYGNUM_REDBOOT_FLASH_RESERVED_BASE == 0
5587 # No user value, uncomment the following line to provide one.
5589 # value_source default
5593 # File to describe RedBoot boot image
5594 # Normally a ROM-startup RedBoot image is first in the
5595 # FLASH, and the system boots using that image. This
5596 # option controls creation of an entry describing it in
5597 # the fis init command. It might be disabled if a
5598 # platform has an immutable boot image of its own, where
5599 # we use a POST-startup RedBoot instead, which performs
5600 # less board initialization.
5602 cdl_option CYGOPT_REDBOOT_FIS_REDBOOT {
5604 # No user value, uncomment the following line to provide one.
5606 # value_source default
5609 # The following properties are affected by this value
5610 # component CYGOPT_REDBOOT_FIS_REDBOOT_POST
5611 # DefaultValue: !CYGOPT_REDBOOT_FIS_REDBOOT
5612 # option CYGBLD_REDBOOT_MIN_IMAGE_SIZE
5613 # DefaultValue: CYGOPT_REDBOOT_FIS_REDBOOT ? 0x20000 : 0
5616 # File to describe RedBoot POST-compatible image
5617 # This option controls creation of an entry describing a
5618 # POST-startup RedBoot image in the fis init command.
5619 # Not all platforms support POST-startup. A platform
5620 # might have both for testing purposes, where the
5621 # eventual user would substitute their own POST code for
5622 # the initial ROM-startup RedBoot, and then jump to the
5623 # POST-compatible RedBoot immediately following.
5625 cdl_component CYGOPT_REDBOOT_FIS_REDBOOT_POST {
5627 # No user value, uncomment the following line to provide one.
5629 # value_source default
5630 # Default value: !CYGOPT_REDBOOT_FIS_REDBOOT
5631 # CYGOPT_REDBOOT_FIS_REDBOOT == 1
5636 # Offset of POST image from FLASH start
5637 # This option specifies the offset for a POST image from
5638 # the start of FLASH. If unset, then the fis entry
5639 # describing the POST image will be placed where
5642 cdl_option CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET {
5643 # This option is not active
5644 # The parent CYGOPT_REDBOOT_FIS_REDBOOT_POST is disabled
5647 # No user value, uncomment the following line to provide one.
5649 # value_source default
5650 # Default value: 0 0
5651 # Requires: CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET >= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5652 # CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET == 0
5653 # CYGBLD_REDBOOT_FLASH_BOOT_OFFSET == 0
5656 # The following properties are affected by this value
5657 # option CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET
5658 # Requires: CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET >= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5662 # File to describe RedBoot backup image
5663 # This option controls creation of an entry describing a
5664 # backup RedBoot image in the fis init command.
5665 # Conventionally a RAM-startup RedBoot image is kept
5666 # under this name for use in updating the ROM-based
5667 # RedBoot that boots the board.
5669 cdl_option CYGOPT_REDBOOT_FIS_REDBOOT_BACKUP {
5671 # No user value, uncomment the following line to provide one.
5673 # value_source default
5677 # Include ARM SIB ID in FIS
5678 # If set, this option will cause the last 5 words of
5679 # the FIS to include the special ID needed for the
5680 # flash to be recognized as a reserved area for RedBoot
5681 # by an ARM BootRom monitor.
5683 cdl_option CYGOPT_REDBOOT_FIS_DIRECTORY_ARM_SIB_ID {
5685 # No user value, uncomment the following line to provide one.
5687 # value_source default
5691 # Size of FIS directory entry
5692 # The FIS directory is limited to one single flash
5693 # sector. If your flash has tiny sectors, you may wish
5694 # to reduce this value in order to get more slots in
5695 # the FIS directory.
5697 cdl_option CYGNUM_REDBOOT_FIS_DIRECTORY_ENTRY_SIZE {
5699 # No user value, uncomment the following line to provide one.
5701 # value_source default
5702 # Default value: 256
5705 # Number of FIS directory entries
5706 # The FIS directory normally occupies a single flash
5707 # sector. Adjusting this value can allow for more than
5708 # one flash sector to be used, which is useful if your
5709 # sectors are very small.
5711 cdl_option CYGNUM_REDBOOT_FIS_DIRECTORY_ENTRY_COUNT {
5713 # No user value, uncomment the following line to provide one.
5715 # value_source default
5719 # Maximum RedBoot image size
5720 # This option controls the maximum length reserved
5721 # for the RedBoot boot image in the FIS table.
5722 # This should be a multiple of the flash's erase
5725 cdl_option CYGBLD_REDBOOT_MIN_IMAGE_SIZE {
5727 # No user value, uncomment the following line to provide one.
5728 # user_value 0x00020000
5729 # The inferred value should not be edited directly.
5730 inferred_value 0x00040000
5731 # value_source inferred
5732 # Default value: CYGOPT_REDBOOT_FIS_REDBOOT ? 0x20000 : 0
5733 # CYGOPT_REDBOOT_FIS_REDBOOT == 1
5737 # Offset from start of FLASH to RedBoot boot image
5738 # This option controls where the RedBoot boot image is
5739 # located relative to the start of FLASH.
5741 cdl_option CYGBLD_REDBOOT_FLASH_BOOT_OFFSET {
5743 # No user value, uncomment the following line to provide one.
5745 # value_source default
5746 # Default value: CYGNUM_REDBOOT_FLASH_RESERVED_BASE
5747 # CYGNUM_REDBOOT_FLASH_RESERVED_BASE == 0
5749 # Requires: CYGNUM_REDBOOT_FLASH_RESERVED_BASE <= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5750 # CYGNUM_REDBOOT_FLASH_RESERVED_BASE == 0
5751 # CYGBLD_REDBOOT_FLASH_BOOT_OFFSET == 0
5754 # The following properties are affected by this value
5755 # option CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET
5756 # Requires: CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET >= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5757 # option CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5758 # Requires: CYGNUM_REDBOOT_FLASH_RESERVED_BASE <= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5759 # component CYGPKG_HAL_ARM_TX53_OPTIONS
5760 # Requires: CYGBLD_REDBOOT_FLASH_BOOT_OFFSET == 0
5763 # Size of reserved area at start of FLASH
5764 # This option reserves an area at the start of
5765 # FLASH where RedBoot will never interfere; it is
5766 # expected that this area contains
5767 # (non-RedBoot-based) POST code or some other boot
5768 # monitor that executes before RedBoot.
5770 cdl_option CYGNUM_REDBOOT_FLASH_RESERVED_BASE {
5772 # No user value, uncomment the following line to provide one.
5774 # value_source default
5777 # The following properties are affected by this value
5778 # option CYGOPT_REDBOOT_FIS_RESERVED_BASE
5779 # ActiveIf: 0 != CYGNUM_REDBOOT_FLASH_RESERVED_BASE
5780 # option CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5781 # DefaultValue: CYGNUM_REDBOOT_FLASH_RESERVED_BASE
5782 # option CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5783 # Requires: CYGNUM_REDBOOT_FLASH_RESERVED_BASE <= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5787 # Keep all RedBoot FLASH data blocks locked.
5788 # When this option is enabled, RedBoot will keep configuration
5789 # data and the FIS directory blocks implicitly locked. While
5790 # this is somewhat safer, it does add overhead during updates.
5792 cdl_option CYGSEM_REDBOOT_FLASH_LOCK_SPECIAL {
5793 # This option is not active
5794 # ActiveIf constraint: CYGHWR_IO_FLASH_BLOCK_LOCKING != 0
5795 # CYGHWR_IO_FLASH_BLOCK_LOCKING == 0
5799 # No user value, uncomment the following line to provide one.
5801 # value_source default
5805 # Use CRC checksums on FIS images.
5806 # When this option is enabled, RedBoot will use CRC checksums
5807 # when reading and writing flash images.
5809 cdl_option CYGSEM_REDBOOT_FIS_CRC_CHECK {
5811 # No user value, uncomment the following line to provide one.
5813 # The inferred value should not be edited directly.
5815 # value_source inferred
5819 # ARM FLASH drivers support SIB flash block structure
5820 # This interface is implemented by a flash driver
5821 # to indicate that it supports the ARM SIB flash
5824 cdl_interface CYGINT_REDBOOT_ARM_FLASH_SIB_SUPPORTED {
5825 # No options implement this inferface
5826 # ActiveIf constraint: CYGPKG_HAL_ARM
5827 # CYGPKG_HAL_ARM == current
5830 # This value cannot be modified here.
5834 # The following properties are affected by this value
5835 # option CYGHWR_REDBOOT_ARM_FLASH_SIB
5836 # ActiveIf: CYGINT_REDBOOT_ARM_FLASH_SIB_SUPPORTED
5839 # Use ARM SIB flash block structure
5840 # This option is used to interpret ARM Flash System
5841 # information blocks.
5843 cdl_option CYGHWR_REDBOOT_ARM_FLASH_SIB {
5844 # This option is not active
5845 # ActiveIf constraint: CYGINT_REDBOOT_ARM_FLASH_SIB_SUPPORTED
5846 # CYGINT_REDBOOT_ARM_FLASH_SIB_SUPPORTED == 0
5850 # No user value, uncomment the following line to provide one.
5852 # value_source default
5857 # Keep RedBoot configuration data in FLASH
5858 # When this option is enabled, RedBoot will keep configuration
5859 # data in a separate block of FLASH memory. This data will
5860 # include such items as the node IP address or startup scripts.
5862 cdl_component CYGSEM_REDBOOT_FLASH_CONFIG {
5864 # No user value, uncomment the following line to provide one.
5866 # value_source default
5867 # Default value: CYGPKG_IO_FLASH != 0
5868 # CYGPKG_IO_FLASH == current
5871 # The following properties are affected by this value
5872 # component CYGDAT_REDBOOT_DEFAULT_IP_ADDR
5873 # DefaultValue: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "0, 0, 0, 0"
5874 # option CYGDAT_REDBOOT_DEFAULT_BOOTP_SERVER_IP_ADDR
5875 # DefaultValue: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "0, 0, 0, 0"
5876 # component CYGDAT_REDBOOT_DEFAULT_GATEWAY_IP_ADDR
5877 # DefaultValue: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "0, 0, 0, 0"
5878 # component CYGDAT_REDBOOT_DEFAULT_IP_ADDR_MASK
5879 # DefaultValue: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "255, 255, 255, 0"
5880 # option CYGPKG_REDBOOT_NETWORKING_DNS_IP
5881 # ActiveIf: !CYGSEM_REDBOOT_FLASH_CONFIG
5882 # option CYGPKG_REDBOOT_NETWORKING_DNS_FCONFIG_DOMAIN
5883 # ActiveIf: CYGSEM_REDBOOT_FLASH_CONFIG
5884 # option CYGFUN_REDBOOT_BOOT_SCRIPT
5885 # ActiveIf: CYGDAT_REDBOOT_DEFAULT_BOOT_SCRIPT || CYGSEM_REDBOOT_FLASH_CONFIG
5889 # Length of configuration data in FLASH
5890 # This option is used to control the amount of memory and FLASH
5891 # to be used for configuration options (persistent storage).
5893 cdl_option CYGNUM_REDBOOT_FLASH_CONFIG_SIZE {
5895 # No user value, uncomment the following line to provide one.
5897 # value_source default
5898 # Default value: 4096
5901 # Style of media used for persistent data storage
5902 # Persistent data storage can either be held in 'norma' FLASH
5903 # or some other device (represented by the 'EEPROM' choice).
5904 # The different styles utilize different access methods.
5906 cdl_option CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA {
5908 # No user value, uncomment the following line to provide one.
5910 # value_source default
5911 # Default value: FLASH
5912 # Legal values: "FLASH" "EEPROM"
5914 # The following properties are affected by this value
5915 # option CYGSEM_REDBOOT_FLASH_COMBINED_FIS_AND_CONFIG
5916 # ActiveIf: CYGOPT_REDBOOT_FIS && (CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == "FLASH")
5917 # option CYGSEM_REDBOOT_FLASH_CONFIG_READONLY_FALLBACK
5918 # DefaultValue: (CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == "FLASH")
5921 # Merged config data and FIS directory
5922 # If this option is set, then the FIS directory and FLASH
5923 # configuration database will be stored in the same physical
5926 cdl_option CYGSEM_REDBOOT_FLASH_COMBINED_FIS_AND_CONFIG {
5927 # ActiveIf constraint: CYGOPT_REDBOOT_FIS && (CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == "FLASH")
5928 # CYGOPT_REDBOOT_FIS == 1
5929 # CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == FLASH
5933 # No user value, uncomment the following line to provide one.
5935 # value_source default
5938 # The following properties are affected by this value
5939 # component CYGOPT_REDBOOT_REDUNDANT_FIS
5940 # Requires: 0 == CYGSEM_REDBOOT_FLASH_COMBINED_FIS_AND_CONFIG
5943 # Which block of flash to use
5944 # Which block of flash should hold the configuration
5945 # information. Positive numbers are absolute block numbers.
5946 # Negative block numbers count backwards from the last block.
5947 # eg 2 means block 2, -2 means the last but one block.
5949 cdl_option CYGNUM_REDBOOT_FLASH_CONFIG_BLOCK {
5951 # No user value, uncomment the following line to provide one.
5953 # value_source default
5957 # Support simple macros/aliases in FLASH
5958 # This option is used to allow support for simple text-based
5959 # macros (aliases). These aliases are kept in the FLASH
5960 # configuration data (persistent storage).
5962 cdl_option CYGSEM_REDBOOT_FLASH_ALIASES {
5964 # No user value, uncomment the following line to provide one.
5966 # value_source default
5970 # Length of strings in FLASH configuration data
5971 # This option is used to control the amount of memory
5972 # and FLASH to be used for string configuration
5973 # options (persistent storage).
5975 cdl_option CYGNUM_REDBOOT_FLASH_STRING_SIZE {
5977 # No user value, uncomment the following line to provide one.
5979 # value_source default
5980 # Default value: 128
5983 # Length of configuration script(s) in FLASH
5984 # This option is used to control the amount of memory and
5985 # FLASH to be used for configuration options (persistent
5988 cdl_option CYGNUM_REDBOOT_FLASH_SCRIPT_SIZE {
5990 # No user value, uncomment the following line to provide one.
5992 # The inferred value should not be edited directly.
5994 # value_source inferred
5995 # Default value: 512
5998 # Fallback to read-only FLASH configuration
5999 # This option will cause the configuration information to
6000 # revert to the readonly information stored in the FLASH.
6001 # The option only takes effect after
6002 # 1) the config_ok flag has been set to be true,
6003 # indicating that at one time the copy in RAM was valid;
6005 # 2) the information in RAM has been verified to be invalid
6007 cdl_option CYGSEM_REDBOOT_FLASH_CONFIG_READONLY_FALLBACK {
6009 # No user value, uncomment the following line to provide one.
6011 # value_source default
6012 # Default value: (CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == "FLASH")
6013 # CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == FLASH
6018 # Allow RedBoot to support fileio
6019 # If this option is enabled then RedBoot will provide commands
6020 # to load files from fileio file systems such as JFFS2.
6022 cdl_component CYGPKG_REDBOOT_FILEIO {
6023 # This option is not active
6024 # ActiveIf constraint: CYGPKG_IO_FILEIO
6025 # CYGPKG_IO_FILEIO (unknown) == 0
6029 # No user value, uncomment the following line to provide one.
6031 # value_source default
6034 # The following properties are affected by this value
6035 # option CYGNUM_REDBOOT_GETC_BUFFER
6036 # DefaultValue: CYGPKG_REDBOOT_FILEIO ? 4096 : 256
6040 # Include an ls command
6041 # If this option is enabled a simple ls command will be
6042 # included in redboot so the contents of a directory
6045 cdl_option CYGBLD_REDBOOT_FILEIO_WITH_LS {
6046 # This option is not active
6047 # The parent CYGPKG_REDBOOT_FILEIO is not active
6050 # No user value, uncomment the following line to provide one.
6052 # value_source default
6057 # Allow RedBoot to support disks
6058 # If this option is enabled then RedBoot will provide commands
6059 # to load disk files.
6061 cdl_component CYGPKG_REDBOOT_DISK {
6069 # Include Redboot commands for disk access
6071 cdl_option CYGSEM_REDBOOT_DISK {
6072 # This option is not active
6073 # The parent CYGPKG_REDBOOT_DISK is disabled
6076 # No user value, uncomment the following line to provide one.
6078 # value_source default
6079 # Default value: CYGINT_REDBOOT_DISK_DRIVERS != 0
6080 # CYGINT_REDBOOT_DISK_DRIVERS == 0
6084 # Hardware drivers for disk-type devices
6086 cdl_interface CYGINT_REDBOOT_DISK_DRIVERS {
6087 # Implemented by CYGSEM_REDBOOT_DISK_IDE, inactive, enabled
6088 # This option is not active
6089 # The parent CYGPKG_REDBOOT_DISK is disabled
6091 # This value cannot be modified here.
6095 # The following properties are affected by this value
6096 # option CYGSEM_REDBOOT_DISK
6097 # DefaultValue: CYGINT_REDBOOT_DISK_DRIVERS != 0
6100 # Maximum number of supported disks
6101 # This option controls the number of disks supported by
6104 cdl_option CYGNUM_REDBOOT_MAX_DISKS {
6105 # This option is not active
6106 # The parent CYGPKG_REDBOOT_DISK is disabled
6109 # No user value, uncomment the following line to provide one.
6111 # value_source default
6115 # Maximum number of partitions per disk
6116 # This option controls the maximum number of supported
6117 # partitions per disk.
6119 cdl_option CYGNUM_REDBOOT_MAX_PARTITIONS {
6120 # This option is not active
6121 # The parent CYGPKG_REDBOOT_DISK is disabled
6124 # No user value, uncomment the following line to provide one.
6126 # value_source default
6130 # Support IDE disks.
6131 # When this option is enabled, RedBoot will support IDE disks.
6133 cdl_component CYGSEM_REDBOOT_DISK_IDE {
6134 # This option is not active
6135 # The parent CYGPKG_REDBOOT_DISK is disabled
6136 # ActiveIf constraint: CYGINT_HAL_PLF_IF_IDE != 0
6137 # CYGINT_HAL_PLF_IF_IDE == 0
6141 # No user value, uncomment the following line to provide one.
6143 # value_source default
6148 # Work with VMware virtual disks
6149 # This option controls the disk driver behavior at
6152 cdl_option CYGSEM_REDBOOT_DISK_IDE_VMWARE {
6153 # This option is not active
6154 # The parent CYGSEM_REDBOOT_DISK_IDE is not active
6157 # No user value, uncomment the following line to provide one.
6159 # value_source default
6164 # Support Linux second extended filesystems.
6165 # When this option is enabled, RedBoot will support EXT2
6168 cdl_component CYGSEM_REDBOOT_DISK_EXT2FS {
6169 # This option is not active
6170 # The parent CYGPKG_REDBOOT_DISK is disabled
6173 # No user value, uncomment the following line to provide one.
6175 # value_source default
6179 # Support ISO9660 filesystems.
6180 # When this option is enabled, RedBoot will support ISO9660
6183 cdl_component CYGSEM_REDBOOT_DISK_ISO9660 {
6184 # This option is not active
6185 # The parent CYGPKG_REDBOOT_DISK is disabled
6187 # Calculated value: 0
6194 # doc: ref/persistent-state-flash.html
6195 # This contains options related to RedBoot's boot script
6198 cdl_component CYGPKG_REDBOOT_BOOT_SCRIPT {
6199 # There is no associated value.
6203 # Boot scripting enabled
6204 # This option controls whether RedBoot boot script
6205 # functionality is enabled.
6207 cdl_option CYGFUN_REDBOOT_BOOT_SCRIPT {
6208 # ActiveIf constraint: CYGDAT_REDBOOT_DEFAULT_BOOT_SCRIPT || CYGSEM_REDBOOT_FLASH_CONFIG
6209 # CYGDAT_REDBOOT_DEFAULT_BOOT_SCRIPT == 0
6210 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
6213 # Calculated value: 1
6218 # Use default RedBoot boot script
6219 # If enabled, this option will tell RedBoot to use the
6220 # value of this option as a default boot script.
6222 cdl_option CYGDAT_REDBOOT_DEFAULT_BOOT_SCRIPT {
6224 # No user value, uncomment the following line to provide one.
6226 # The inferred value should not be edited directly.
6228 # value_source inferred
6229 # Default value: 0 0
6231 # The following properties are affected by this value
6232 # option CYGFUN_REDBOOT_BOOT_SCRIPT
6233 # ActiveIf: CYGDAT_REDBOOT_DEFAULT_BOOT_SCRIPT || CYGSEM_REDBOOT_FLASH_CONFIG
6236 # Resolution (in ms) for script timeout value.
6237 # This option controls the resolution of the script
6238 # timeout. The value is specified in milliseconds
6239 # (ms), thus to have the script timeout be defined in
6240 # terms of tenths of seconds, use 100.
6242 cdl_option CYGNUM_REDBOOT_BOOT_SCRIPT_TIMEOUT_RESOLUTION {
6244 # No user value, uncomment the following line to provide one.
6246 # The inferred value should not be edited directly.
6248 # value_source inferred
6249 # Default value: 1000
6252 # Script default timeout value
6253 # This option is used to set the default timeout for startup
6254 # scripts, when they are enabled.
6256 cdl_option CYGNUM_REDBOOT_BOOT_SCRIPT_DEFAULT_TIMEOUT {
6258 # No user value, uncomment the following line to provide one.
6260 # The inferred value should not be edited directly.
6262 # value_source inferred
6267 # Support RTC for time & date functions
6268 # When this option is enabled, RedBoot will support commands to
6269 # query and set the real time clock (time and date)
6271 cdl_option CYGSEM_REDBOOT_RTC {
6272 # This option is not active
6273 # ActiveIf constraint: CYGPKG_IO_WALLCLOCK
6274 # CYGPKG_IO_WALLCLOCK (unknown) == 0
6278 # No user value, uncomment the following line to provide one.
6280 # value_source default
6284 # Behave like a ROM monitor
6285 # Enabling this option will allow RedBoot to provide ROM
6286 # monitor-style services to programs which it executes.
6288 cdl_option CYGPRI_REDBOOT_ROM_MONITOR {
6289 # ActiveIf constraint: CYG_HAL_STARTUP == "ROM" || CYG_HAL_STARTUP == "ROMRAM"
6290 # CYG_HAL_STARTUP == ROMRAM
6291 # CYG_HAL_STARTUP == ROMRAM
6294 # Calculated value: 1
6297 # Requires: CYGSEM_HAL_ROM_MONITOR
6298 # CYGSEM_HAL_ROM_MONITOR == 1
6302 # Allow RedBoot to handle GNUPro application 'syscalls'.
6303 # If this option is enabled then RedBoot will install a
6304 # syscall handler to support debugging of applications
6305 # based on GNUPro newlib/bsp.
6307 cdl_component CYGSEM_REDBOOT_BSP_SYSCALLS {
6309 # No user value, uncomment the following line to provide one.
6311 # value_source default
6314 # The following properties are affected by this value
6315 # option CYGOPT_HAL_ARM_SYSCALL_GPROF_SUPPORT
6316 # ActiveIf: CYGSEM_REDBOOT_BSP_SYSCALLS
6317 # option CYGPKG_HAL_GDB_FILEIO
6318 # ActiveIf: CYGSEM_REDBOOT_BSP_SYSCALLS
6322 # Support additional syscalls for 'gprof' profiling
6323 # Support additional syscalls to support a periodic callback
6324 # function for histogram-style profiling, and an enquire/set
6326 # The application must use the GNUPro newlib facilities
6329 cdl_option CYGSEM_REDBOOT_BSP_SYSCALLS_GPROF {
6330 # This option is not active
6331 # The parent CYGSEM_REDBOOT_BSP_SYSCALLS is disabled
6332 # ActiveIf constraint: 0 < CYGINT_REDBOOT_BSP_SYSCALLS_GPROF_SUPPORT
6333 # CYGINT_REDBOOT_BSP_SYSCALLS_GPROF_SUPPORT == 0
6337 # No user value, uncomment the following line to provide one.
6339 # value_source default
6343 # Does the HAL support 'gprof' profiling?
6345 cdl_interface CYGINT_REDBOOT_BSP_SYSCALLS_GPROF_SUPPORT {
6346 # Implemented by CYGOPT_HAL_ARM_SYSCALL_GPROF_SUPPORT, inactive, enabled
6347 # This option is not active
6348 # The parent CYGSEM_REDBOOT_BSP_SYSCALLS is disabled
6350 # This value cannot be modified here.
6354 # The following properties are affected by this value
6355 # option CYGSEM_REDBOOT_BSP_SYSCALLS_GPROF
6356 # ActiveIf: 0 < CYGINT_REDBOOT_BSP_SYSCALLS_GPROF_SUPPORT
6359 # Do not raise SIGTRAP when program exits
6360 # For some (single shot) newlib based programs,
6361 # exiting and returning a termination status may be
6362 # the normal expected behavior.
6364 cdl_option CYGOPT_REDBOOT_BSP_SYSCALLS_EXIT_WITHOUT_TRAP {
6365 # This option is not active
6366 # The parent CYGSEM_REDBOOT_BSP_SYSCALLS is disabled
6369 # No user value, uncomment the following line to provide one.
6371 # value_source default
6376 # Use a common buffer for Zlib and FIS
6377 # Use a common memory buffer for both the zlib workspace
6378 # and FIS directory operations. This can save a substantial
6379 # amount of RAM, especially when flash sectors are large.
6381 cdl_component CYGOPT_REDBOOT_FIS_ZLIB_COMMON_BUFFER {
6382 # ActiveIf constraint: CYGBLD_BUILD_REDBOOT_WITH_ZLIB && CYGOPT_REDBOOT_FIS
6383 # CYGBLD_BUILD_REDBOOT_WITH_ZLIB == 1
6384 # CYGOPT_REDBOOT_FIS == 1
6388 # No user value, uncomment the following line to provide one.
6390 # value_source default
6395 # Size of Zlib/FIS common buffer
6396 # Size of common buffer to allocate. Must be at least the
6397 # size of one flash sector.
6399 cdl_option CYGNUM_REDBOOT_FIS_ZLIB_COMMON_BUFFER_SIZE {
6400 # This option is not active
6401 # The parent CYGOPT_REDBOOT_FIS_ZLIB_COMMON_BUFFER is disabled
6404 # No user value, uncomment the following line to provide one.
6405 # user_value 0x0000C000
6406 # value_source default
6407 # Default value: 0x0000C000
6408 # Legal values: 0x4000 to 0x80000000
6412 # Buffer size in getc when loading images
6413 # When loading images a buffer is used between redboot and the
6414 # underlying storage medium, eg a filesystem, or a socket etc.
6415 # The size of this buffer can have a big impart on load speed.
6417 cdl_option CYGNUM_REDBOOT_GETC_BUFFER {
6419 # No user value, uncomment the following line to provide one.
6421 # value_source default
6422 # Default value: CYGPKG_REDBOOT_FILEIO ? 4096 : 256
6423 # CYGPKG_REDBOOT_FILEIO == 0
6428 # Redboot for ARM options
6429 # This option lists the target's requirements for a valid Redboot
6432 cdl_component CYGPKG_REDBOOT_ARM_OPTIONS {
6433 # ActiveIf constraint: CYGPKG_REDBOOT
6434 # CYGPKG_REDBOOT == current
6437 # There is no associated value.
6439 # The following properties are affected by this value
6443 # Provide the exec command in RedBoot
6444 # This option contains requirements for booting linux
6445 # from RedBoot. The component is enabled/disabled from
6448 cdl_component CYGPKG_REDBOOT_ARM_LINUX_EXEC {
6449 # ActiveIf constraint: CYGBLD_BUILD_REDBOOT_WITH_EXEC
6450 # CYGBLD_BUILD_REDBOOT_WITH_EXEC == 1
6453 # There is no associated value.
6457 # Enable -x switch for exec command.
6458 # This option allows bi-endian platforms to launch kernels
6459 # built for an endianess different than the RedBoot endianess
6461 cdl_option CYGHWR_REDBOOT_LINUX_EXEC_X_SWITCH {
6463 # No user value, uncomment the following line to provide one.
6465 # value_source default
6469 # Physical base address of linux kernel
6470 # This is the physical address of the base of the
6471 # Linux kernel image.
6473 cdl_option CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS {
6475 # No user value, uncomment the following line to provide one.
6476 # user_value 0x70108000
6477 # value_source default
6478 # Default value: CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT
6479 # CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT == 0x70108000
6483 # Default physical base address of linux kernel
6484 # This is the physical address of the base of the
6485 # Linux kernel image. This option gets set by the
6488 cdl_option CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT {
6490 # No user value, uncomment the following line to provide one.
6491 # user_value 0x00008000
6492 # The inferred value should not be edited directly.
6493 inferred_value 0x70108000
6494 # value_source inferred
6495 # Default value: 0x00008000
6497 # The following properties are affected by this value
6498 # option CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS
6499 # DefaultValue: CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT
6500 # component CYGPKG_REDBOOT_HAL_TX53_OPTIONS
6501 # Requires: CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT == 0x70108000
6504 # Base address of linux kernel parameter tags
6505 # This is the base address of the area of memory used to
6506 # pass parameters to the Linux kernel. This should be chosen
6507 # to avoid overlap with the kernel and any ramdisk image.
6509 cdl_option CYGHWR_REDBOOT_ARM_LINUX_TAGS_ADDRESS {
6511 # No user value, uncomment the following line to provide one.
6512 # user_value 0x00000100
6513 # value_source default
6514 # Default value: 0x00000100
6519 # Redboot HAL options
6520 # This option lists the target's requirements for a valid Redboot
6523 cdl_component CYGPKG_REDBOOT_HAL_OPTIONS {
6524 # ActiveIf constraint: CYGPKG_REDBOOT
6525 # CYGPKG_REDBOOT == current
6528 # There is no associated value.
6532 # Build Redboot ROM binary image
6533 # This option enables the conversion of the Redboot ELF
6534 # image to a binary image suitable for ROM programming.
6536 cdl_option CYGBLD_BUILD_REDBOOT_BIN {
6537 # ActiveIf constraint: CYGBLD_BUILD_REDBOOT
6538 # CYGBLD_BUILD_REDBOOT == 1
6542 # No user value, uncomment the following line to provide one.
6544 # value_source default
6549 # Redboot HAL variant options
6551 cdl_component CYGPKG_REDBOOT_HAL_TX53_OPTIONS {
6552 # ActiveIf constraint: CYGPKG_REDBOOT
6553 # CYGPKG_REDBOOT == current
6556 # There is no associated value.
6557 # Requires: CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT == 0x70108000
6558 # CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT == 0x70108000
6563 # ISO C and POSIX infrastructure
6564 # eCos supports implementations of ISO C libraries and POSIX
6565 # implementations. This package provides infrastructure used by
6566 # all such implementations.
6568 cdl_package CYGPKG_ISOINFRA {
6569 # Packages cannot be added or removed, nor can their version be changed,
6570 # simply by editing their value. Instead the appropriate configuration
6571 # should be used to perform these actions.
6573 # This value cannot be modified here.
6575 # Current value: 1 current
6577 # The following properties are affected by this value
6578 # component CYGBLD_BUILD_REDBOOT
6579 # Requires: CYGPKG_ISOINFRA
6580 # package CYGPKG_LIBC_STRING
6581 # Requires: CYGPKG_ISOINFRA
6582 # package CYGPKG_COMPRESS_ZLIB
6583 # Requires: CYGPKG_ISOINFRA
6584 # package CYGPKG_IO_FLASH
6585 # Requires: CYGPKG_ISOINFRA
6586 # option CYGIMP_MEMALLOC_ALLOCATOR_DLMALLOC_USE_MEMCPY
6587 # Requires: CYGPKG_ISOINFRA
6588 # option CYGIMP_MEMALLOC_ALLOCATOR_DLMALLOC_USE_MEMCPY
6589 # DefaultValue: 0 != CYGPKG_ISOINFRA
6590 # component CYGPKG_MEMALLOC_MALLOC_ALLOCATORS
6591 # ActiveIf: CYGPKG_ISOINFRA
6592 # package CYGPKG_LIBC_I18N
6593 # Requires: CYGPKG_ISOINFRA
6594 # package CYGPKG_LIBC_STDLIB
6595 # Requires: CYGPKG_ISOINFRA
6599 # Startup and termination
6601 cdl_component CYGPKG_ISO_STARTUP {
6602 # There is no associated value.
6606 # main() startup implementations
6607 # Implementations of this interface arrange for a user-supplied
6608 # main() to be called in an ISO compatible environment.
6610 cdl_interface CYGINT_ISO_MAIN_STARTUP {
6611 # No options implement this inferface
6612 # This value cannot be modified here.
6615 # Requires: 1 >= CYGINT_ISO_MAIN_STARTUP
6616 # CYGINT_ISO_MAIN_STARTUP == 0
6619 # The following properties are affected by this value
6620 # interface CYGINT_ISO_MAIN_STARTUP
6621 # Requires: 1 >= CYGINT_ISO_MAIN_STARTUP
6624 # environ implementations
6625 # Implementations of this interface provide the environ
6626 # variable required by POSIX.
6628 cdl_interface CYGINT_ISO_ENVIRON {
6629 # No options implement this inferface
6630 # This value cannot be modified here.
6633 # Requires: 1 >= CYGINT_ISO_ENVIRON
6634 # CYGINT_ISO_ENVIRON == 0
6637 # The following properties are affected by this value
6638 # interface CYGINT_ISO_ENVIRON
6639 # Requires: 1 >= CYGINT_ISO_ENVIRON
6645 cdl_component CYGPKG_ISO_CTYPE_H {
6646 # There is no associated value.
6650 # Number of implementations of ctype functions
6652 cdl_interface CYGINT_ISO_CTYPE {
6653 # Implemented by CYGPKG_LIBC_I18N, active, enabled
6654 # This value cannot be modified here.
6657 # Requires: 1 >= CYGINT_ISO_CTYPE
6658 # CYGINT_ISO_CTYPE == 1
6661 # The following properties are affected by this value
6662 # interface CYGINT_ISO_CTYPE
6663 # Requires: 1 >= CYGINT_ISO_CTYPE
6664 # package CYGPKG_HAL_ARM_TX53KARO
6665 # Requires: CYGINT_ISO_CTYPE
6666 # option CYGFUN_LIBC_STRING_BSD_FUNCS
6667 # Requires: CYGINT_ISO_CTYPE
6668 # package CYGPKG_LIBC_STDLIB
6669 # Requires: CYGINT_ISO_CTYPE
6672 # Ctype implementation header
6674 cdl_option CYGBLD_ISO_CTYPE_HEADER {
6676 # No user value, uncomment the following line to provide one.
6678 # The inferred value should not be edited directly.
6679 inferred_value 1 <cyg/libc/i18n/ctype.inl>
6680 # value_source inferred
6681 # Default value: 0 0
6683 # The following properties are affected by this value
6684 # option CYGPKG_LIBC_I18N_NEWLIB_CTYPE
6685 # Requires: CYGBLD_ISO_CTYPE_HEADER == "<cyg/libc/i18n/newlibctype.h>"
6686 # option CYGIMP_LIBC_I18N_CTYPE_INLINES
6687 # Requires: CYGBLD_ISO_CTYPE_HEADER == "<cyg/libc/i18n/ctype.inl>"
6693 cdl_component CYGPKG_ISO_ERRNO {
6694 # There is no associated value.
6698 # Number of implementations of error codes
6700 cdl_interface CYGINT_ISO_ERRNO_CODES {
6701 # Implemented by CYGPKG_ERROR, active, enabled
6702 # This value cannot be modified here.
6705 # Requires: 1 >= CYGINT_ISO_ERRNO_CODES
6706 # CYGINT_ISO_ERRNO_CODES == 1
6709 # The following properties are affected by this value
6710 # interface CYGINT_ISO_ERRNO_CODES
6711 # Requires: 1 >= CYGINT_ISO_ERRNO_CODES
6714 # Error codes implementation header
6716 cdl_option CYGBLD_ISO_ERRNO_CODES_HEADER {
6718 # No user value, uncomment the following line to provide one.
6720 # The inferred value should not be edited directly.
6721 inferred_value 1 <cyg/error/codes.h>
6722 # value_source inferred
6723 # Default value: 0 0
6725 # The following properties are affected by this value
6726 # package CYGPKG_ERROR
6727 # Requires: CYGBLD_ISO_ERRNO_CODES_HEADER == "<cyg/error/codes.h>"
6730 # Number of implementations of errno variable
6732 cdl_interface CYGINT_ISO_ERRNO {
6733 # Implemented by CYGPKG_ERROR_ERRNO, active, enabled
6734 # This value cannot be modified here.
6737 # Requires: 1 >= CYGINT_ISO_ERRNO
6738 # CYGINT_ISO_ERRNO == 1
6741 # The following properties are affected by this value
6742 # interface CYGINT_ISO_ERRNO
6743 # Requires: 1 >= CYGINT_ISO_ERRNO
6746 # errno variable implementation header
6748 cdl_option CYGBLD_ISO_ERRNO_HEADER {
6750 # No user value, uncomment the following line to provide one.
6752 # The inferred value should not be edited directly.
6753 inferred_value 1 <cyg/error/errno.h>
6754 # value_source inferred
6755 # Default value: 0 0
6757 # The following properties are affected by this value
6758 # component CYGPKG_ERROR_ERRNO
6759 # Requires: CYGBLD_ISO_ERRNO_HEADER == "<cyg/error/errno.h>"
6763 # Locale-related functions
6765 cdl_component CYGPKG_ISO_LOCALE {
6766 # There is no associated value.
6770 # Number of implementations of locale functions
6772 cdl_interface CYGINT_ISO_LOCALE {
6773 # Implemented by CYGPKG_LIBC_I18N, active, enabled
6774 # This value cannot be modified here.
6777 # Requires: 1 >= CYGINT_ISO_LOCALE
6778 # CYGINT_ISO_LOCALE == 1
6781 # The following properties are affected by this value
6782 # interface CYGINT_ISO_LOCALE
6783 # Requires: 1 >= CYGINT_ISO_LOCALE
6786 # Locale implementation header
6788 cdl_option CYGBLD_ISO_LOCALE_HEADER {
6790 # No user value, uncomment the following line to provide one.
6792 # value_source default
6793 # Default value: 0 0
6797 # Standard I/O-related functionality
6799 cdl_component CYGPKG_ISO_STDIO {
6800 # There is no associated value.
6804 # Number of implementations of stdio file types
6806 cdl_interface CYGINT_ISO_STDIO_FILETYPES {
6807 # No options implement this inferface
6808 # This value cannot be modified here.
6810 # Current value: 0 0
6811 # Requires: 1 >= CYGINT_ISO_STDIO_FILETYPES
6812 # CYGINT_ISO_STDIO_FILETYPES == 0
6815 # The following properties are affected by this value
6816 # interface CYGINT_ISO_STDIO_FILETYPES
6817 # Requires: 1 >= CYGINT_ISO_STDIO_FILETYPES
6820 # Stdio file types implementation header
6822 cdl_option CYGBLD_ISO_STDIO_FILETYPES_HEADER {
6824 # No user value, uncomment the following line to provide one.
6826 # value_source default
6827 # Default value: 0 0
6830 # Stdio standard streams implementations
6832 cdl_interface CYGINT_ISO_STDIO_STREAMS {
6833 # No options implement this inferface
6834 # This value cannot be modified here.
6836 # Current value: 0 0
6837 # Requires: 1 >= CYGINT_ISO_STDIO_STREAMS
6838 # CYGINT_ISO_STDIO_STREAMS == 0
6841 # The following properties are affected by this value
6842 # interface CYGINT_ISO_STDIO_STREAMS
6843 # Requires: 1 >= CYGINT_ISO_STDIO_STREAMS
6846 # Stdio standard streams implementation header
6847 # This header file must define stdin, stdout
6850 cdl_option CYGBLD_ISO_STDIO_STREAMS_HEADER {
6852 # No user value, uncomment the following line to provide one.
6854 # value_source default
6855 # Default value: 0 0
6858 # Number of implementations of stdio file operations
6860 cdl_interface CYGINT_ISO_STDIO_FILEOPS {
6861 # No options implement this inferface
6862 # This value cannot be modified here.
6864 # Current value: 0 0
6865 # Requires: 1 >= CYGINT_ISO_STDIO_FILEOPS
6866 # CYGINT_ISO_STDIO_FILEOPS == 0
6869 # The following properties are affected by this value
6870 # interface CYGINT_ISO_STDIO_FILEOPS
6871 # Requires: 1 >= CYGINT_ISO_STDIO_FILEOPS
6874 # Stdio file operations implementation header
6875 # This header controls the file system operations on a file
6876 # such as remove(), rename(), tmpfile(), tmpnam() and associated
6879 cdl_option CYGBLD_ISO_STDIO_FILEOPS_HEADER {
6881 # No user value, uncomment the following line to provide one.
6883 # value_source default
6884 # Default value: 0 0
6887 # Number of implementations of stdio file access functionals
6889 cdl_interface CYGINT_ISO_STDIO_FILEACCESS {
6890 # No options implement this inferface
6891 # This value cannot be modified here.
6893 # Current value: 0 0
6894 # Requires: 1 >= CYGINT_ISO_STDIO_FILEACCESS
6895 # CYGINT_ISO_STDIO_FILEACCESS == 0
6898 # The following properties are affected by this value
6899 # interface CYGINT_ISO_STDIO_FILEACCESS
6900 # Requires: 1 >= CYGINT_ISO_STDIO_FILEACCESS
6901 # option CYGFUN_COMPRESS_ZLIB_GZIO
6902 # Requires: CYGINT_ISO_STDIO_FILEACCESS
6905 # Stdio file access implementation header
6906 # This header controls the file access operations
6907 # such as fclose(), fflush(), fopen(), freopen(), setbuf(),
6908 # setvbuf(), and associated constants.
6910 cdl_option CYGBLD_ISO_STDIO_FILEACCESS_HEADER {
6912 # No user value, uncomment the following line to provide one.
6914 # value_source default
6915 # Default value: 0 0
6918 # Number of implementations of stdio formatted I/O
6920 cdl_interface CYGINT_ISO_STDIO_FORMATTED_IO {
6921 # No options implement this inferface
6922 # This value cannot be modified here.
6924 # Current value: 0 0
6925 # Requires: 1 >= CYGINT_ISO_STDIO_FORMATTED_IO
6926 # CYGINT_ISO_STDIO_FORMATTED_IO == 0
6929 # The following properties are affected by this value
6930 # interface CYGINT_ISO_STDIO_FORMATTED_IO
6931 # Requires: 1 >= CYGINT_ISO_STDIO_FORMATTED_IO
6932 # option CYGFUN_COMPRESS_ZLIB_GZIO
6933 # Requires: CYGINT_ISO_STDIO_FORMATTED_IO
6936 # Stdio formatted I/O implementation header
6938 cdl_option CYGBLD_ISO_STDIO_FORMATTED_IO_HEADER {
6940 # No user value, uncomment the following line to provide one.
6942 # value_source default
6943 # Default value: 0 0
6946 # Number of implementations of stdio character I/O
6948 cdl_interface CYGINT_ISO_STDIO_CHAR_IO {
6949 # No options implement this inferface
6950 # This value cannot be modified here.
6952 # Current value: 0 0
6953 # Requires: 1 >= CYGINT_ISO_STDIO_CHAR_IO
6954 # CYGINT_ISO_STDIO_CHAR_IO == 0
6957 # The following properties are affected by this value
6958 # interface CYGINT_ISO_STDIO_CHAR_IO
6959 # Requires: 1 >= CYGINT_ISO_STDIO_CHAR_IO
6962 # Stdio character I/O implementation header
6964 cdl_option CYGBLD_ISO_STDIO_CHAR_IO_HEADER {
6966 # No user value, uncomment the following line to provide one.
6968 # value_source default
6969 # Default value: 0 0
6972 # Number of implementations of stdio direct I/O
6974 cdl_interface CYGINT_ISO_STDIO_DIRECT_IO {
6975 # No options implement this inferface
6976 # This value cannot be modified here.
6978 # Current value: 0 0
6979 # Requires: 1 >= CYGINT_ISO_STDIO_DIRECT_IO
6980 # CYGINT_ISO_STDIO_DIRECT_IO == 0
6983 # The following properties are affected by this value
6984 # interface CYGINT_ISO_STDIO_DIRECT_IO
6985 # Requires: 1 >= CYGINT_ISO_STDIO_DIRECT_IO
6988 # Stdio direct I/O implementation header
6990 cdl_option CYGBLD_ISO_STDIO_DIRECT_IO_HEADER {
6992 # No user value, uncomment the following line to provide one.
6994 # value_source default
6995 # Default value: 0 0
6998 # Number of implementations of stdio file positioning
7000 cdl_interface CYGINT_ISO_STDIO_FILEPOS {
7001 # No options implement this inferface
7002 # This value cannot be modified here.
7004 # Current value: 0 0
7005 # Requires: 1 >= CYGINT_ISO_STDIO_FILEPOS
7006 # CYGINT_ISO_STDIO_FILEPOS == 0
7009 # The following properties are affected by this value
7010 # interface CYGINT_ISO_STDIO_FILEPOS
7011 # Requires: 1 >= CYGINT_ISO_STDIO_FILEPOS
7012 # option CYGFUN_COMPRESS_ZLIB_GZIO
7013 # Requires: CYGINT_ISO_STDIO_FILEPOS
7016 # Stdio file positioning implementation header
7018 cdl_option CYGBLD_ISO_STDIO_FILEPOS_HEADER {
7020 # No user value, uncomment the following line to provide one.
7022 # value_source default
7023 # Default value: 0 0
7026 # Number of implementations of stdio error handling
7028 cdl_interface CYGINT_ISO_STDIO_ERROR {
7029 # No options implement this inferface
7030 # This value cannot be modified here.
7032 # Current value: 0 0
7033 # Requires: 1 >= CYGINT_ISO_STDIO_ERROR
7034 # CYGINT_ISO_STDIO_ERROR == 0
7037 # The following properties are affected by this value
7038 # interface CYGINT_ISO_STDIO_ERROR
7039 # Requires: 1 >= CYGINT_ISO_STDIO_ERROR
7042 # Stdio error handling implementation header
7044 cdl_option CYGBLD_ISO_STDIO_ERROR_HEADER {
7046 # No user value, uncomment the following line to provide one.
7048 # value_source default
7049 # Default value: 0 0
7052 # POSIX fd-related function implementations
7054 cdl_interface CYGINT_ISO_STDIO_POSIX_FDFUNCS {
7055 # No options implement this inferface
7056 # This value cannot be modified here.
7058 # Current value: 0 0
7059 # Requires: 1 >= CYGINT_ISO_STDIO_POSIX_FDFUNCS
7060 # CYGINT_ISO_STDIO_POSIX_FDFUNCS == 0
7063 # The following properties are affected by this value
7064 # interface CYGINT_ISO_STDIO_POSIX_FDFUNCS
7065 # Requires: 1 >= CYGINT_ISO_STDIO_POSIX_FDFUNCS
7068 # POSIX fd-related function implementation header
7070 cdl_option CYGBLD_ISO_STDIO_POSIX_FDFUNCS_HEADER {
7072 # No user value, uncomment the following line to provide one.
7074 # value_source default
7075 # Default value: 0 0
7079 # Standard general utility functions
7081 cdl_component CYGPKG_ISO_STDLIB {
7082 # There is no associated value.
7086 # String conversion function implementations
7088 cdl_interface CYGINT_ISO_STDLIB_STRCONV {
7089 # Implemented by CYGPKG_LIBC_STDLIB, active, enabled
7090 # This value cannot be modified here.
7093 # Requires: 1 >= CYGINT_ISO_STDLIB_STRCONV
7094 # CYGINT_ISO_STDLIB_STRCONV == 1
7097 # The following properties are affected by this value
7098 # interface CYGINT_ISO_STDLIB_STRCONV
7099 # Requires: 1 >= CYGINT_ISO_STDLIB_STRCONV
7102 # String conversion function implementation header
7104 cdl_option CYGBLD_ISO_STDLIB_STRCONV_HEADER {
7106 # No user value, uncomment the following line to provide one.
7108 # The inferred value should not be edited directly.
7109 inferred_value 1 <cyg/libc/stdlib/atox.inl>
7110 # value_source inferred
7111 # Default value: 0 0
7113 # The following properties are affected by this value
7114 # option CYGIMP_LIBC_STDLIB_INLINE_ATOX
7115 # Requires: CYGBLD_ISO_STDLIB_STRCONV_HEADER == "<cyg/libc/stdlib/atox.inl>"
7118 # String to FP conversion function implementations
7120 cdl_interface CYGINT_ISO_STDLIB_STRCONV_FLOAT {
7121 # Implemented by CYGFUN_LIBC_strtod, active, disabled
7122 # This value cannot be modified here.
7125 # Requires: 1 >= CYGINT_ISO_STDLIB_STRCONV_FLOAT
7126 # CYGINT_ISO_STDLIB_STRCONV_FLOAT == 0
7129 # The following properties are affected by this value
7130 # interface CYGINT_ISO_STDLIB_STRCONV_FLOAT
7131 # Requires: 1 >= CYGINT_ISO_STDLIB_STRCONV_FLOAT
7134 # String to FP conversion function implementation header
7136 cdl_option CYGBLD_ISO_STDLIB_STRCONV_FLOAT_HEADER {
7138 # No user value, uncomment the following line to provide one.
7140 # value_source default
7141 # Default value: 0 0
7144 # Random number generator implementations
7146 cdl_interface CYGINT_ISO_RAND {
7147 # Implemented by CYGIMP_LIBC_RAND_SIMPLEST, active, disabled
7148 # Implemented by CYGIMP_LIBC_RAND_SIMPLE1, active, disabled
7149 # Implemented by CYGIMP_LIBC_RAND_KNUTH1, active, enabled
7150 # This value cannot be modified here.
7153 # Requires: 1 >= CYGINT_ISO_RAND
7154 # CYGINT_ISO_RAND == 1
7157 # The following properties are affected by this value
7158 # interface CYGINT_ISO_RAND
7159 # Requires: 1 >= CYGINT_ISO_RAND
7162 # Random number generator implementation header
7164 cdl_option CYGBLD_ISO_RAND_HEADER {
7166 # No user value, uncomment the following line to provide one.
7168 # value_source default
7169 # Default value: 0 0
7172 # Malloc implementations
7174 cdl_interface CYGINT_ISO_MALLOC {
7175 # Implemented by CYGPKG_MEMALLOC_MALLOC_ALLOCATORS, active, enabled
7176 # This value cannot be modified here.
7179 # Requires: 1 >= CYGINT_ISO_MALLOC
7180 # CYGINT_ISO_MALLOC == 1
7183 # The following properties are affected by this value
7184 # interface CYGINT_ISO_MALLOC
7185 # Requires: 1 >= CYGINT_ISO_MALLOC
7186 # option CYGFUN_LIBC_STRING_STRDUP
7187 # ActiveIf: CYGINT_ISO_MALLOC
7190 # Malloc implementation header
7192 cdl_option CYGBLD_ISO_MALLOC_HEADER {
7194 # No user value, uncomment the following line to provide one.
7196 # value_source default
7197 # Default value: 0 0
7200 # Mallinfo() implementations
7202 cdl_interface CYGINT_ISO_MALLINFO {
7203 # Implemented by CYGPKG_MEMALLOC_MALLOC_ALLOCATORS, active, enabled
7204 # This value cannot be modified here.
7207 # Requires: 1 >= CYGINT_ISO_MALLINFO
7208 # CYGINT_ISO_MALLINFO == 1
7211 # The following properties are affected by this value
7212 # interface CYGINT_ISO_MALLINFO
7213 # Requires: 1 >= CYGINT_ISO_MALLINFO
7216 # Mallinfo() implementation header
7218 cdl_option CYGBLD_ISO_MALLINFO_HEADER {
7220 # No user value, uncomment the following line to provide one.
7222 # value_source default
7223 # Default value: 0 0
7226 # Program exit functionality implementations
7228 cdl_interface CYGINT_ISO_EXIT {
7229 # No options implement this inferface
7230 # This value cannot be modified here.
7233 # Requires: 1 >= CYGINT_ISO_EXIT
7234 # CYGINT_ISO_EXIT == 0
7237 # The following properties are affected by this value
7238 # interface CYGINT_ISO_EXIT
7239 # Requires: 1 >= CYGINT_ISO_EXIT
7240 # option CYGFUN_INFRA_DUMMY_ABORT
7241 # Requires: !CYGINT_ISO_EXIT
7242 # option CYGFUN_INFRA_DUMMY_ABORT
7243 # DefaultValue: CYGINT_ISO_EXIT == 0
7246 # Program exit functionality implementation header
7248 cdl_option CYGBLD_ISO_EXIT_HEADER {
7250 # No user value, uncomment the following line to provide one.
7252 # value_source default
7253 # Default value: 0 0
7256 # Program environment implementations
7258 cdl_interface CYGINT_ISO_STDLIB_ENVIRON {
7259 # Implemented by CYGPKG_LIBC_STDLIB, active, enabled
7260 # This value cannot be modified here.
7263 # Requires: 1 >= CYGINT_ISO_STDLIB_ENVIRON
7264 # CYGINT_ISO_STDLIB_ENVIRON == 1
7267 # The following properties are affected by this value
7268 # interface CYGINT_ISO_STDLIB_ENVIRON
7269 # Requires: 1 >= CYGINT_ISO_STDLIB_ENVIRON
7272 # Program environment implementation header
7274 cdl_option CYGBLD_ISO_STDLIB_ENVIRON_HEADER {
7276 # No user value, uncomment the following line to provide one.
7278 # value_source default
7279 # Default value: 0 0
7282 # system() implementations
7284 cdl_interface CYGINT_ISO_STDLIB_SYSTEM {
7285 # Implemented by CYGPKG_LIBC_STDLIB, active, enabled
7286 # This value cannot be modified here.
7289 # Requires: 1 >= CYGINT_ISO_STDLIB_SYSTEM
7290 # CYGINT_ISO_STDLIB_SYSTEM == 1
7293 # The following properties are affected by this value
7294 # interface CYGINT_ISO_STDLIB_SYSTEM
7295 # Requires: 1 >= CYGINT_ISO_STDLIB_SYSTEM
7298 # system() implementation header
7300 cdl_option CYGBLD_ISO_STDLIB_SYSTEM_HEADER {
7302 # No user value, uncomment the following line to provide one.
7304 # value_source default
7305 # Default value: 0 0
7308 # bsearch() implementations
7310 cdl_interface CYGINT_ISO_BSEARCH {
7311 # Implemented by CYGPKG_LIBC_STDLIB, active, enabled
7312 # This value cannot be modified here.
7315 # Requires: 1 >= CYGINT_ISO_BSEARCH
7316 # CYGINT_ISO_BSEARCH == 1
7319 # The following properties are affected by this value
7320 # interface CYGINT_ISO_BSEARCH
7321 # Requires: 1 >= CYGINT_ISO_BSEARCH
7324 # bsearch() implementation header
7326 cdl_option CYGBLD_ISO_BSEARCH_HEADER {
7328 # No user value, uncomment the following line to provide one.
7330 # value_source default
7331 # Default value: 0 0
7334 # qsort() implementations
7336 cdl_interface CYGINT_ISO_QSORT {
7337 # Implemented by CYGPKG_LIBC_STDLIB, active, enabled
7338 # This value cannot be modified here.
7341 # Requires: 1 >= CYGINT_ISO_STDLIB_QSORT
7342 # CYGINT_ISO_STDLIB_QSORT (unknown) == 0
7345 # The following properties are affected by this value
7348 # qsort() implementation header
7350 cdl_option CYGBLD_ISO_QSORT_HEADER {
7352 # No user value, uncomment the following line to provide one.
7354 # value_source default
7355 # Default value: 0 0
7358 # abs()/labs() implementations
7360 cdl_interface CYGINT_ISO_ABS {
7361 # Implemented by CYGPKG_LIBC_STDLIB, active, enabled
7362 # This value cannot be modified here.
7365 # Requires: 1 >= CYGINT_ISO_STDLIB_ABS
7366 # CYGINT_ISO_STDLIB_ABS (unknown) == 0
7369 # The following properties are affected by this value
7372 # abs()/labs() implementation header
7374 cdl_option CYGBLD_ISO_STDLIB_ABS_HEADER {
7376 # No user value, uncomment the following line to provide one.
7378 # The inferred value should not be edited directly.
7379 inferred_value 1 <cyg/libc/stdlib/abs.inl>
7380 # value_source inferred
7381 # Default value: 0 0
7383 # The following properties are affected by this value
7384 # option CYGIMP_LIBC_STDLIB_INLINE_ABS
7385 # Requires: CYGBLD_ISO_STDLIB_ABS_HEADER == "<cyg/libc/stdlib/abs.inl>"
7388 # div()/ldiv() implementations
7390 cdl_interface CYGINT_ISO_DIV {
7391 # Implemented by CYGPKG_LIBC_STDLIB, active, enabled
7392 # This value cannot be modified here.
7395 # Requires: 1 >= CYGINT_ISO_STDLIB_DIV
7396 # CYGINT_ISO_STDLIB_DIV (unknown) == 0
7399 # The following properties are affected by this value
7402 # div()/ldiv() implementation header
7404 cdl_option CYGBLD_ISO_STDLIB_DIV_HEADER {
7406 # No user value, uncomment the following line to provide one.
7408 # The inferred value should not be edited directly.
7409 inferred_value 1 <cyg/libc/stdlib/div.inl>
7410 # value_source inferred
7411 # Default value: 0 0
7413 # The following properties are affected by this value
7414 # option CYGIMP_LIBC_STDLIB_INLINE_DIV
7415 # Requires: CYGBLD_ISO_STDLIB_DIV_HEADER == "<cyg/libc/stdlib/div.inl>"
7418 # Header defining the implementation's MB_CUR_MAX
7420 cdl_option CYGBLD_ISO_STDLIB_MB_CUR_MAX_HEADER {
7422 # No user value, uncomment the following line to provide one.
7424 # value_source default
7425 # Default value: 0 0
7427 # The following properties are affected by this value
7428 # interface CYGINT_LIBC_I18N_MB_REQUIRED
7429 # Requires: CYGBLD_ISO_STDLIB_MB_CUR_MAX_HEADER == "<cyg/libc/i18n/mb.h>"
7432 # Multibyte character implementations
7434 cdl_interface CYGINT_ISO_STDLIB_MULTIBYTE {
7435 # Implemented by CYGPKG_LIBC_I18N, active, enabled
7436 # This value cannot be modified here.
7439 # Requires: 1 >= CYGINT_ISO_STDLIB_MULTIBYTE
7440 # CYGINT_ISO_STDLIB_MULTIBYTE == 1
7443 # The following properties are affected by this value
7444 # interface CYGINT_ISO_STDLIB_MULTIBYTE
7445 # Requires: 1 >= CYGINT_ISO_STDLIB_MULTIBYTE
7448 # Multibyte character implementation header
7450 cdl_option CYGBLD_ISO_STDLIB_MULTIBYTE_HEADER {
7452 # No user value, uncomment the following line to provide one.
7454 # value_source default
7455 # Default value: 0 0
7461 cdl_component CYGPKG_ISO_STRING {
7462 # There is no associated value.
7466 # Number of implementations of strerror() function
7468 cdl_interface CYGINT_ISO_STRERROR {
7469 # Implemented by CYGPKG_ERROR_STRERROR, active, enabled
7470 # This value cannot be modified here.
7472 # Current value: 1 1
7473 # Requires: 1 >= CYGINT_ISO_STRERROR
7474 # CYGINT_ISO_STRERROR == 1
7477 # The following properties are affected by this value
7478 # interface CYGINT_ISO_STRERROR
7479 # Requires: 1 >= CYGINT_ISO_STRERROR
7482 # strerror() implementation header
7484 cdl_option CYGBLD_ISO_STRERROR_HEADER {
7486 # No user value, uncomment the following line to provide one.
7488 # The inferred value should not be edited directly.
7489 inferred_value 1 <cyg/error/strerror.h>
7490 # value_source inferred
7491 # Default value: 0 0
7493 # The following properties are affected by this value
7494 # option CYGPKG_ERROR_STRERROR
7495 # Requires: CYGBLD_ISO_STRERROR_HEADER == "<cyg/error/strerror.h>"
7498 # memcpy() implementation header
7500 cdl_option CYGBLD_ISO_MEMCPY_HEADER {
7502 # No user value, uncomment the following line to provide one.
7504 # value_source default
7505 # Default value: 0 0
7508 # memset() implementation header
7510 cdl_option CYGBLD_ISO_MEMSET_HEADER {
7512 # No user value, uncomment the following line to provide one.
7514 # value_source default
7515 # Default value: 0 0
7518 # Number of implementations of strtok_r() function
7520 cdl_interface CYGINT_ISO_STRTOK_R {
7521 # Implemented by CYGPKG_LIBC_STRING, active, enabled
7522 # This value cannot be modified here.
7524 # Current value: 1 1
7525 # Requires: 1 >= CYGINT_ISO_STRTOK_R
7526 # CYGINT_ISO_STRTOK_R == 1
7529 # The following properties are affected by this value
7530 # interface CYGINT_ISO_STRTOK_R
7531 # Requires: 1 >= CYGINT_ISO_STRTOK_R
7534 # strtok_r() implementation header
7536 cdl_option CYGBLD_ISO_STRTOK_R_HEADER {
7538 # No user value, uncomment the following line to provide one.
7540 # The inferred value should not be edited directly.
7541 inferred_value 1 <cyg/libc/string/string.h>
7542 # value_source inferred
7543 # Default value: 0 0
7545 # The following properties are affected by this value
7546 # package CYGPKG_LIBC_STRING
7547 # Requires: CYGBLD_ISO_STRTOK_R_HEADER == "<cyg/libc/string/string.h>"
7550 # Number of implementations of locale-specific string functions
7551 # This covers locale-dependent string functions such as strcoll()
7554 cdl_interface CYGINT_ISO_STRING_LOCALE_FUNCS {
7555 # Implemented by CYGPKG_LIBC_STRING, active, enabled
7556 # This value cannot be modified here.
7558 # Current value: 1 1
7559 # Requires: 1 >= CYGINT_ISO_STRING_LOCALE_FUNCS
7560 # CYGINT_ISO_STRING_LOCALE_FUNCS == 1
7563 # The following properties are affected by this value
7564 # interface CYGINT_ISO_STRING_LOCALE_FUNCS
7565 # Requires: 1 >= CYGINT_ISO_STRING_LOCALE_FUNCS
7568 # Locale-specific string functions' implementation header
7569 # This covers locale-dependent string functions such as strcoll()
7572 cdl_option CYGBLD_ISO_STRING_LOCALE_FUNCS_HEADER {
7574 # No user value, uncomment the following line to provide one.
7576 # The inferred value should not be edited directly.
7577 inferred_value 1 <cyg/libc/string/string.h>
7578 # value_source inferred
7579 # Default value: 0 0
7581 # The following properties are affected by this value
7582 # package CYGPKG_LIBC_STRING
7583 # Requires: CYGBLD_ISO_STRING_LOCALE_FUNCS_HEADER == "<cyg/libc/string/string.h>"
7586 # Number of implementations of BSD string functions
7588 cdl_interface CYGINT_ISO_STRING_BSD_FUNCS {
7589 # Implemented by CYGFUN_LIBC_STRING_BSD_FUNCS, active, disabled
7590 # This value cannot be modified here.
7592 # Current value: 0 0
7593 # Requires: 1 >= CYGINT_ISO_STRING_BSD_FUNCS
7594 # CYGINT_ISO_STRING_BSD_FUNCS == 0
7597 # The following properties are affected by this value
7598 # interface CYGINT_ISO_STRING_BSD_FUNCS
7599 # Requires: 1 >= CYGINT_ISO_STRING_BSD_FUNCS
7602 # BSD string functions' implementation header
7604 cdl_option CYGBLD_ISO_STRING_BSD_FUNCS_HEADER {
7606 # No user value, uncomment the following line to provide one.
7608 # The inferred value should not be edited directly.
7609 inferred_value 1 <cyg/libc/string/bsdstring.h>
7610 # value_source inferred
7611 # Default value: 0 0
7613 # The following properties are affected by this value
7614 # option CYGFUN_LIBC_STRING_BSD_FUNCS
7615 # Requires: CYGBLD_ISO_STRING_BSD_FUNCS_HEADER == "<cyg/libc/string/bsdstring.h>"
7618 # Number of implementations of other mem*() functions
7620 cdl_interface CYGINT_ISO_STRING_MEMFUNCS {
7621 # Implemented by CYGPKG_LIBC_STRING, active, enabled
7622 # This value cannot be modified here.
7624 # Current value: 1 1
7625 # Requires: 1 >= CYGINT_ISO_STRING_MEMFUNCS
7626 # CYGINT_ISO_STRING_MEMFUNCS == 1
7629 # The following properties are affected by this value
7630 # interface CYGINT_ISO_STRING_MEMFUNCS
7631 # Requires: 1 >= CYGINT_ISO_STRING_MEMFUNCS
7632 # component CYGBLD_BUILD_REDBOOT
7633 # Requires: CYGINT_ISO_STRING_MEMFUNCS
7634 # component CYGPKG_IO_ETH_DRIVERS_STAND_ALONE
7635 # Requires: CYGINT_ISO_STRING_MEMFUNCS
7638 # Other mem*() functions' implementation header
7640 cdl_option CYGBLD_ISO_STRING_MEMFUNCS_HEADER {
7642 # No user value, uncomment the following line to provide one.
7644 # The inferred value should not be edited directly.
7645 inferred_value 1 <cyg/libc/string/string.h>
7646 # value_source inferred
7647 # Default value: 0 0
7649 # The following properties are affected by this value
7650 # package CYGPKG_LIBC_STRING
7651 # Requires: CYGBLD_ISO_STRING_MEMFUNCS_HEADER == "<cyg/libc/string/string.h>"
7654 # Number of implementations of other ISO C str*() functions
7655 # This covers the other str*() functions defined by ISO C.
7657 cdl_interface CYGINT_ISO_STRING_STRFUNCS {
7658 # Implemented by CYGPKG_LIBC_STRING, active, enabled
7659 # This value cannot be modified here.
7661 # Current value: 1 1
7662 # Requires: 1 >= CYGINT_ISO_STRING_STRFUNCS
7663 # CYGINT_ISO_STRING_STRFUNCS == 1
7666 # The following properties are affected by this value
7667 # interface CYGINT_ISO_STRING_STRFUNCS
7668 # Requires: 1 >= CYGINT_ISO_STRING_STRFUNCS
7669 # option CYGFUN_INFRA_DUMMY_STRLEN
7670 # Requires: !CYGINT_ISO_STRING_STRFUNCS
7671 # option CYGFUN_INFRA_DUMMY_STRLEN
7672 # DefaultValue: CYGINT_ISO_STRING_STRFUNCS == 0
7673 # component CYGBLD_BUILD_REDBOOT
7674 # Requires: CYGINT_ISO_STRING_STRFUNCS
7675 # component CYGPKG_IO_ETH_DRIVERS_NET
7676 # Requires: CYGINT_ISO_STRING_STRFUNCS
7677 # option CYGFUN_COMPRESS_ZLIB_GZIO
7678 # Requires: CYGINT_ISO_STRING_STRFUNCS
7679 # package CYGPKG_IO_FLASH
7680 # Requires: CYGINT_ISO_STRING_STRFUNCS
7681 # package CYGPKG_LIBC_STDLIB
7682 # Requires: CYGINT_ISO_STRING_STRFUNCS
7685 # Other ISO C str*() functions' implementation header
7686 # This covers the other str*() functions defined by ISO C.
7688 cdl_option CYGBLD_ISO_STRING_STRFUNCS_HEADER {
7690 # No user value, uncomment the following line to provide one.
7692 # The inferred value should not be edited directly.
7693 inferred_value 1 <cyg/libc/string/string.h>
7694 # value_source inferred
7695 # Default value: 0 0
7697 # The following properties are affected by this value
7698 # package CYGPKG_LIBC_STRING
7699 # Requires: CYGBLD_ISO_STRING_STRFUNCS_HEADER == "<cyg/libc/string/string.h>"
7703 # Clock and time functionality
7705 cdl_component CYGPKG_ISO_TIME {
7706 # There is no associated value.
7710 # time_t implementation header
7712 cdl_option CYGBLD_ISO_TIME_T_HEADER {
7714 # No user value, uncomment the following line to provide one.
7716 # value_source default
7717 # Default value: 0 0
7720 # clock_t implementation header
7722 cdl_option CYGBLD_ISO_CLOCK_T_HEADER {
7724 # No user value, uncomment the following line to provide one.
7726 # value_source default
7727 # Default value: 0 0
7730 # struct timeval implementation header
7732 cdl_option CYGBLD_ISO_STRUCTTIMEVAL_HEADER {
7734 # No user value, uncomment the following line to provide one.
7736 # value_source default
7737 # Default value: 0 0
7740 # fnmatch implementation header
7742 cdl_option CYGBLD_ISO_FNMATCH_HEADER {
7744 # No user value, uncomment the following line to provide one.
7746 # value_source default
7747 # Default value: 0 0
7750 # Number of implementations of POSIX timer types
7752 cdl_interface CYGINT_ISO_POSIX_TIMER_TYPES {
7753 # No options implement this inferface
7754 # This value cannot be modified here.
7756 # Current value: 0 0
7757 # Requires: 1 >= CYGINT_ISO_POSIX_TIMER_TYPES
7758 # CYGINT_ISO_POSIX_TIMER_TYPES == 0
7761 # The following properties are affected by this value
7762 # interface CYGINT_ISO_POSIX_TIMER_TYPES
7763 # Requires: 1 >= CYGINT_ISO_POSIX_TIMER_TYPES
7766 # POSIX timer types implementation header
7768 cdl_option CYGBLD_ISO_POSIX_TIMER_TYPES_HEADER {
7770 # No user value, uncomment the following line to provide one.
7772 # value_source default
7773 # Default value: 0 0
7776 # Number of implementations of POSIX clock types
7778 cdl_interface CYGINT_ISO_POSIX_CLOCK_TYPES {
7779 # No options implement this inferface
7780 # This value cannot be modified here.
7782 # Current value: 0 0
7783 # Requires: 1 >= CYGINT_ISO_POSIX_CLOCK_TYPES
7784 # CYGINT_ISO_POSIX_CLOCK_TYPES == 0
7787 # The following properties are affected by this value
7788 # interface CYGINT_ISO_POSIX_CLOCK_TYPES
7789 # Requires: 1 >= CYGINT_ISO_POSIX_CLOCK_TYPES
7792 # POSIX clock types implementation header
7794 cdl_option CYGBLD_ISO_POSIX_CLOCK_TYPES_HEADER {
7796 # No user value, uncomment the following line to provide one.
7798 # value_source default
7799 # Default value: 0 0
7802 # Number of implementations of ISO C types
7804 cdl_interface CYGINT_ISO_C_TIME_TYPES {
7805 # No options implement this inferface
7806 # This value cannot be modified here.
7808 # Current value: 0 0
7809 # Requires: 1 >= CYGINT_ISO_C_TIME_TYPES
7810 # CYGINT_ISO_C_TIME_TYPES == 0
7813 # The following properties are affected by this value
7814 # interface CYGINT_ISO_C_TIME_TYPES
7815 # Requires: 1 >= CYGINT_ISO_C_TIME_TYPES
7818 # ISO C time types implementation header
7820 cdl_option CYGBLD_ISO_C_TIME_TYPES_HEADER {
7822 # No user value, uncomment the following line to provide one.
7824 # value_source default
7825 # Default value: 0 0
7828 # Number of implementations of POSIX timers
7830 cdl_interface CYGINT_ISO_POSIX_TIMERS {
7831 # No options implement this inferface
7832 # This value cannot be modified here.
7834 # Current value: 0 0
7835 # Requires: 1 >= CYGINT_ISO_POSIX_TIMERS
7836 # CYGINT_ISO_POSIX_TIMERS == 0
7839 # The following properties are affected by this value
7840 # interface CYGINT_ISO_POSIX_TIMERS
7841 # Requires: 1 >= CYGINT_ISO_POSIX_TIMERS
7844 # POSIX timer implementation header
7846 cdl_option CYGBLD_ISO_POSIX_TIMERS_HEADER {
7848 # No user value, uncomment the following line to provide one.
7850 # value_source default
7851 # Default value: 0 0
7854 # Number of implementations of POSIX clocks
7856 cdl_interface CYGINT_ISO_POSIX_CLOCKS {
7857 # No options implement this inferface
7858 # This value cannot be modified here.
7860 # Current value: 0 0
7861 # Requires: 1 >= CYGINT_ISO_POSIX_CLOCKS
7862 # CYGINT_ISO_POSIX_CLOCKS == 0
7865 # The following properties are affected by this value
7866 # interface CYGINT_ISO_POSIX_CLOCKS
7867 # Requires: 1 >= CYGINT_ISO_POSIX_CLOCKS
7870 # POSIX clocks implementation header
7872 cdl_option CYGBLD_ISO_POSIX_CLOCKS_HEADER {
7874 # No user value, uncomment the following line to provide one.
7876 # value_source default
7877 # Default value: 0 0
7880 # Number of implementations of ISO C clock functions
7882 cdl_interface CYGINT_ISO_C_CLOCK_FUNCS {
7883 # No options implement this inferface
7884 # This value cannot be modified here.
7886 # Current value: 0 0
7887 # Requires: 1 >= CYGINT_ISO_C_CLOCK_FUNCS
7888 # CYGINT_ISO_C_CLOCK_FUNCS == 0
7891 # The following properties are affected by this value
7892 # interface CYGINT_ISO_C_CLOCK_FUNCS
7893 # Requires: 1 >= CYGINT_ISO_C_CLOCK_FUNCS
7896 # ISO C clock functions' implementation header
7898 cdl_option CYGBLD_ISO_C_CLOCK_FUNCS_HEADER {
7900 # No user value, uncomment the following line to provide one.
7902 # value_source default
7903 # Default value: 0 0
7906 # Number of implementations of tzset() function
7908 cdl_interface CYGINT_ISO_TZSET {
7909 # No options implement this inferface
7910 # This value cannot be modified here.
7912 # Current value: 0 0
7913 # Requires: 1 >= CYGINT_ISO_TZSET
7914 # CYGINT_ISO_TZSET == 0
7917 # The following properties are affected by this value
7918 # interface CYGINT_ISO_TZSET
7919 # Requires: 1 >= CYGINT_ISO_TZSET
7922 # tzset() implementation header
7924 cdl_option CYGBLD_ISO_TZSET_HEADER {
7926 # No user value, uncomment the following line to provide one.
7928 # value_source default
7929 # Default value: 0 0
7933 # Signal functionality
7935 cdl_component CYGPKG_ISO_SIGNAL {
7936 # There is no associated value.
7940 # Number of implementations of signal numbers
7942 cdl_interface CYGINT_ISO_SIGNAL_NUMBERS {
7943 # No options implement this inferface
7944 # This value cannot be modified here.
7947 # Requires: 1 >= CYGINT_ISO_SIGNAL_NUMBERS
7948 # CYGINT_ISO_SIGNAL_NUMBERS == 0
7951 # The following properties are affected by this value
7952 # interface CYGINT_ISO_SIGNAL_NUMBERS
7953 # Requires: 1 >= CYGINT_ISO_SIGNAL_NUMBERS
7956 # Signal numbering implementation header
7957 # This header provides the mapping of signal
7958 # names (e.g. SIGBUS) to numbers.
7960 cdl_option CYGBLD_ISO_SIGNAL_NUMBERS_HEADER {
7962 # No user value, uncomment the following line to provide one.
7964 # value_source default
7965 # Default value: 0 0
7968 # Number of signal implementations
7970 cdl_interface CYGINT_ISO_SIGNAL_IMPL {
7971 # No options implement this inferface
7972 # This value cannot be modified here.
7975 # Requires: 1 >= CYGINT_ISO_SIGNAL_IMPL
7976 # CYGINT_ISO_SIGNAL_IMPL == 0
7979 # The following properties are affected by this value
7980 # interface CYGINT_ISO_SIGNAL_IMPL
7981 # Requires: 1 >= CYGINT_ISO_SIGNAL_IMPL
7984 # Signals implementation header
7986 cdl_option CYGBLD_ISO_SIGNAL_IMPL_HEADER {
7988 # No user value, uncomment the following line to provide one.
7990 # value_source default
7991 # Default value: 0 0
7994 # POSIX real time signals feature test macro
7995 # This defines the POSIX feature test macro
7996 # that indicates that the POSIX real time signals
7999 cdl_interface CYGINT_POSIX_REALTIME_SIGNALS {
8000 # No options implement this inferface
8001 # This value cannot be modified here.
8004 # Requires: 1 >= CYGINT_POSIX_REALTIME_SIGNALS
8005 # CYGINT_POSIX_REALTIME_SIGNALS == 0
8008 # The following properties are affected by this value
8009 # interface CYGINT_POSIX_REALTIME_SIGNALS
8010 # Requires: 1 >= CYGINT_POSIX_REALTIME_SIGNALS
8014 # Non-local jumps functionality
8016 cdl_component CYGPKG_ISO_SETJMP {
8017 # There is no associated value.
8021 # setjmp() / longjmp() implementations
8023 cdl_interface CYGINT_ISO_SETJMP {
8024 # No options implement this inferface
8025 # This value cannot be modified here.
8028 # Requires: 1 >= CYGINT_ISO_SETJMP
8029 # CYGINT_ISO_SETJMP == 0
8032 # The following properties are affected by this value
8033 # interface CYGINT_ISO_SETJMP
8034 # Requires: 1 >= CYGINT_ISO_SETJMP
8037 # setjmp() / longjmp() implementation header
8039 cdl_option CYGBLD_ISO_SETJMP_HEADER {
8041 # No user value, uncomment the following line to provide one.
8043 # value_source default
8044 # Default value: 0 0
8047 # sigsetjmp() / siglongjmp() implementations
8049 cdl_interface CYGINT_ISO_SIGSETJMP {
8050 # No options implement this inferface
8051 # This value cannot be modified here.
8054 # Requires: 1 >= CYGINT_ISO_SIGSETJMP
8055 # CYGINT_ISO_SIGSETJMP == 0
8058 # The following properties are affected by this value
8059 # interface CYGINT_ISO_SIGSETJMP
8060 # Requires: 1 >= CYGINT_ISO_SIGSETJMP
8063 # sigsetjmp() / siglongjmp() implementation header
8065 cdl_option CYGBLD_ISO_SIGSETJMP_HEADER {
8067 # No user value, uncomment the following line to provide one.
8069 # value_source default
8070 # Default value: 0 0
8074 # Assertions implementation header
8076 cdl_option CYGBLD_ISO_ASSERT_HEADER {
8078 # No user value, uncomment the following line to provide one.
8080 # value_source default
8081 # Default value: 0 0
8084 # POSIX file control
8085 # This covers the POSIX file control definitions,
8086 # normally found in <fcntl.h>
8088 cdl_component CYGPKG_ISO_POSIX_FCNTL {
8089 # There is no associated value.
8093 # POSIX open flags implementation header
8095 cdl_option CYGBLD_ISO_OFLAG_HEADER {
8097 # No user value, uncomment the following line to provide one.
8099 # value_source default
8100 # Default value: 0 0
8103 # POSIX fcntl() implementations
8105 cdl_interface CYGINT_ISO_FCNTL {
8106 # No options implement this inferface
8107 # This value cannot be modified here.
8110 # Requires: 1 >= CYGINT_ISO_FCNTL
8111 # CYGINT_ISO_FCNTL == 0
8114 # The following properties are affected by this value
8115 # interface CYGINT_ISO_FCNTL
8116 # Requires: 1 >= CYGINT_ISO_FCNTL
8119 # POSIX fcntl() implementation header
8121 cdl_option CYGBLD_ISO_FCNTL_HEADER {
8123 # No user value, uncomment the following line to provide one.
8125 # value_source default
8126 # Default value: 0 0
8129 # POSIX file open implementations
8131 cdl_interface CYGINT_ISO_OPEN {
8132 # No options implement this inferface
8133 # This value cannot be modified here.
8136 # Requires: 1 >= CYGINT_ISO_OPEN
8137 # CYGINT_ISO_OPEN == 0
8140 # The following properties are affected by this value
8141 # interface CYGINT_ISO_OPEN
8142 # Requires: 1 >= CYGINT_ISO_OPEN
8145 # POSIX file open implementation header
8147 cdl_option CYGBLD_ISO_OPEN_HEADER {
8149 # No user value, uncomment the following line to provide one.
8151 # value_source default
8152 # Default value: 0 0
8156 # <sys/stat.h> definitions implementation header
8158 cdl_option CYGBLD_ISO_STAT_DEFS_HEADER {
8160 # No user value, uncomment the following line to provide one.
8162 # value_source default
8163 # Default value: 0 0
8166 # POSIX directory reading implementation
8168 cdl_interface CYGINT_ISO_DIRENT {
8169 # No options implement this inferface
8170 # This value cannot be modified here.
8173 # Requires: 1 >= CYGINT_ISO_DIRENT
8174 # CYGINT_ISO_DIRENT == 0
8177 # The following properties are affected by this value
8178 # interface CYGINT_ISO_DIRENT
8179 # Requires: 1 >= CYGINT_ISO_DIRENT
8182 # <dirent.h> definitions implementation header
8184 cdl_option CYGBLD_ISO_DIRENT_HEADER {
8186 # No user value, uncomment the following line to provide one.
8188 # value_source default
8189 # Default value: 0 0
8192 # POSIX <sys/types.h> contents
8193 # This covers the types required by POSIX to be in
8196 cdl_component CYGPKG_ISO_POSIX_TYPES {
8197 # There is no associated value.
8201 # POSIX thread types implementations
8203 cdl_interface CYGINT_ISO_PTHREADTYPES {
8204 # No options implement this inferface
8205 # This value cannot be modified here.
8208 # Requires: 1 >= CYGINT_ISO_PTHREADTYPES
8209 # CYGINT_ISO_PTHREADTYPES == 0
8212 # The following properties are affected by this value
8213 # interface CYGINT_ISO_PTHREADTYPES
8214 # Requires: 1 >= CYGINT_ISO_PTHREADTYPES
8215 # interface CYGINT_ISO_PMUTEXTYPES
8216 # Requires: 1 >= CYGINT_ISO_PTHREADTYPES
8219 # POSIX thread types implementation header
8221 cdl_option CYGBLD_ISO_PTHREADTYPES_HEADER {
8223 # No user value, uncomment the following line to provide one.
8225 # value_source default
8226 # Default value: 0 0
8229 # POSIX mutex types implementations
8231 cdl_interface CYGINT_ISO_PMUTEXTYPES {
8232 # No options implement this inferface
8233 # This value cannot be modified here.
8236 # Requires: 1 >= CYGINT_ISO_PTHREADTYPES
8237 # CYGINT_ISO_PTHREADTYPES == 0
8241 # POSIX mutex types implementation header
8243 cdl_option CYGBLD_ISO_PMUTEXTYPES_HEADER {
8245 # No user value, uncomment the following line to provide one.
8247 # value_source default
8248 # Default value: 0 0
8251 # ssize_t implementation header
8253 cdl_option CYGBLD_ISO_SSIZE_T_HEADER {
8255 # No user value, uncomment the following line to provide one.
8257 # value_source default
8258 # Default value: 0 0
8261 # Filesystem types implementation header
8263 cdl_option CYGBLD_ISO_FSTYPES_HEADER {
8265 # No user value, uncomment the following line to provide one.
8267 # value_source default
8268 # Default value: 0 0
8271 # gid_t, pid_t, uid_t implementation header
8273 cdl_option CYGBLD_ISO_SCHEDTYPES_HEADER {
8275 # No user value, uncomment the following line to provide one.
8277 # value_source default
8278 # Default value: 0 0
8282 # Non-POSIX <sys/types.h> contents
8283 # This covers the extra types required by non-POSIX
8284 # packages to be in <sys/types.h>. These would normally
8285 # only be visible if _POSIX_SOURCE is not defined.
8287 cdl_component CYGPKG_ISO_EXTRA_TYPES {
8288 # There is no associated value.
8292 # BSD compatible types
8294 cdl_interface CYGINT_ISO_BSDTYPES {
8295 # No options implement this inferface
8296 # This value cannot be modified here.
8299 # Requires: 1 >= CYGINT_ISO_BSDTYPES
8300 # CYGINT_ISO_BSDTYPES == 0
8303 # The following properties are affected by this value
8304 # interface CYGINT_ISO_BSDTYPES
8305 # Requires: 1 >= CYGINT_ISO_BSDTYPES
8310 cdl_option CYGBLD_ISO_BSDTYPES_HEADER {
8312 # No user value, uncomment the following line to provide one.
8314 # value_source default
8315 # Default value: 0 0
8321 cdl_component CYGPKG_ISO_UTSNAME {
8322 # There is no associated value.
8328 cdl_option CYGBLD_ISO_UTSNAME_HEADER {
8330 # No user value, uncomment the following line to provide one.
8332 # value_source default
8333 # Default value: 0 0
8339 cdl_component CYGPKG_ISO_SCHED {
8340 # There is no associated value.
8344 # POSIX scheduler implementations
8346 cdl_interface CYGINT_ISO_SCHED_IMPL {
8347 # No options implement this inferface
8348 # This value cannot be modified here.
8351 # Requires: 1 >= CYGINT_ISO_SCHED_IMPL
8352 # CYGINT_ISO_SCHED_IMPL == 0
8355 # The following properties are affected by this value
8356 # interface CYGINT_ISO_SCHED_IMPL
8357 # Requires: 1 >= CYGINT_ISO_SCHED_IMPL
8360 # POSIX scheduler implementation header
8362 cdl_option CYGBLD_ISO_SCHED_IMPL_HEADER {
8364 # No user value, uncomment the following line to provide one.
8366 # value_source default
8367 # Default value: 0 0
8373 cdl_component CYGPKG_ISO_SEMAPHORES {
8374 # There is no associated value.
8378 # POSIX semaphore implementations
8380 cdl_interface CYGINT_ISO_SEMAPHORES {
8381 # No options implement this inferface
8382 # This value cannot be modified here.
8385 # Requires: 1 >= CYGINT_ISO_SEMAPHORES
8386 # CYGINT_ISO_SEMAPHORES == 0
8389 # The following properties are affected by this value
8390 # interface CYGINT_ISO_SEMAPHORES
8391 # Requires: 1 >= CYGINT_ISO_SEMAPHORES
8394 # POSIX semaphore implementation header
8396 cdl_option CYGBLD_ISO_SEMAPHORES_HEADER {
8398 # No user value, uncomment the following line to provide one.
8400 # value_source default
8401 # Default value: 0 0
8405 # POSIX message queues
8407 cdl_component CYGPKG_ISO_MQUEUE {
8408 # There is no associated value.
8414 cdl_interface CYGINT_ISO_MQUEUE {
8415 # No options implement this inferface
8416 # This value cannot be modified here.
8419 # Requires: 1 >= CYGINT_ISO_MQUEUE
8420 # CYGINT_ISO_MQUEUE == 0
8423 # The following properties are affected by this value
8424 # interface CYGINT_ISO_MQUEUE
8425 # Requires: 1 >= CYGINT_ISO_MQUEUE
8426 # option CYGNUM_ISO_MQUEUE_OPEN_MAX
8427 # ActiveIf: CYGINT_ISO_MQUEUE
8428 # option CYGNUM_ISO_MQUEUE_PRIO_MAX
8429 # ActiveIf: CYGINT_ISO_MQUEUE
8432 # Implementation header
8434 cdl_option CYGBLD_ISO_MQUEUE_HEADER {
8436 # No user value, uncomment the following line to provide one.
8438 # value_source default
8439 # Default value: 0 0
8442 # Maximum number of open message queues
8444 cdl_option CYGNUM_ISO_MQUEUE_OPEN_MAX {
8445 # This option is not active
8446 # ActiveIf constraint: CYGINT_ISO_MQUEUE
8447 # CYGINT_ISO_MQUEUE == 0
8451 # No user value, uncomment the following line to provide one.
8453 # value_source default
8454 # Default value: CYGNUM_POSIX_MQUEUE_OPEN_MAX > 0 ? CYGNUM_POSIX_MQUEUE_OPEN_MAX : 0
8455 # CYGNUM_POSIX_MQUEUE_OPEN_MAX (unknown) == 0
8456 # CYGNUM_POSIX_MQUEUE_OPEN_MAX (unknown) == 0
8460 # Maximum number of message priorities
8462 cdl_option CYGNUM_ISO_MQUEUE_PRIO_MAX {
8463 # This option is not active
8464 # ActiveIf constraint: CYGINT_ISO_MQUEUE
8465 # CYGINT_ISO_MQUEUE == 0
8469 # No user value, uncomment the following line to provide one.
8470 # user_value 1 65535
8471 # value_source default
8472 # Default value: 1 65535
8478 cdl_component CYGPKG_ISO_PTHREAD {
8479 # There is no associated value.
8483 # POSIX pthread implementations
8485 cdl_interface CYGINT_ISO_PTHREAD_IMPL {
8486 # No options implement this inferface
8487 # This value cannot be modified here.
8489 # Current value: 0 0
8490 # Requires: 1 >= CYGINT_ISO_PTHREAD_IMPL
8491 # CYGINT_ISO_PTHREAD_IMPL == 0
8494 # The following properties are affected by this value
8495 # interface CYGINT_ISO_PTHREAD_IMPL
8496 # Requires: 1 >= CYGINT_ISO_PTHREAD_IMPL
8499 # POSIX pthread implementation header
8501 cdl_option CYGBLD_ISO_PTHREAD_IMPL_HEADER {
8503 # No user value, uncomment the following line to provide one.
8505 # value_source default
8506 # Default value: 0 0
8509 # POSIX mutex/cond var implementations
8511 cdl_interface CYGINT_ISO_PTHREAD_MUTEX {
8512 # No options implement this inferface
8513 # This value cannot be modified here.
8515 # Current value: 0 0
8516 # Requires: 1 >= CYGINT_ISO_PTHREAD_MUTEX
8517 # CYGINT_ISO_PTHREAD_MUTEX == 0
8520 # The following properties are affected by this value
8521 # interface CYGINT_ISO_PTHREAD_MUTEX
8522 # Requires: 1 >= CYGINT_ISO_PTHREAD_MUTEX
8525 # POSIX mutex/cond var implementation header
8527 cdl_option CYGBLD_ISO_PTHREAD_MUTEX_HEADER {
8529 # No user value, uncomment the following line to provide one.
8531 # value_source default
8532 # Default value: 0 0
8538 cdl_component CYGPKG_ISO_LIMITS {
8539 # There is no associated value.
8543 # POSIX pthread limits implementations
8545 cdl_interface CYGINT_ISO_POSIX_LIMITS {
8546 # No options implement this inferface
8547 # This value cannot be modified here.
8550 # Requires: 1 >= CYGINT_ISO_POSIX_LIMITS
8551 # CYGINT_ISO_POSIX_LIMITS == 0
8554 # The following properties are affected by this value
8555 # interface CYGINT_ISO_POSIX_LIMITS
8556 # Requires: 1 >= CYGINT_ISO_POSIX_LIMITS
8559 # POSIX pthread limits implementation header
8561 cdl_option CYGBLD_ISO_POSIX_LIMITS_HEADER {
8563 # No user value, uncomment the following line to provide one.
8565 # value_source default
8566 # Default value: 0 0
8569 # OPEN_MAX implementation header
8571 cdl_option CYGBLD_ISO_OPEN_MAX_HEADER {
8573 # No user value, uncomment the following line to provide one.
8575 # value_source default
8576 # Default value: 0 0
8579 # LINK_MAX implementation header
8581 cdl_option CYGBLD_ISO_LINK_MAX_HEADER {
8583 # No user value, uncomment the following line to provide one.
8585 # value_source default
8586 # Default value: 0 0
8589 # NAME_MAX implementation header
8591 cdl_option CYGBLD_ISO_NAME_MAX_HEADER {
8593 # No user value, uncomment the following line to provide one.
8595 # value_source default
8596 # Default value: 0 0
8599 # PATH_MAX implementation header
8601 cdl_option CYGBLD_ISO_PATH_MAX_HEADER {
8603 # No user value, uncomment the following line to provide one.
8605 # value_source default
8606 # Default value: 0 0
8612 cdl_component CYGPKG_ISO_TERMIOS {
8613 # There is no associated value.
8617 # POSIX termios implementations
8619 cdl_interface CYGINT_ISO_TERMIOS {
8620 # No options implement this inferface
8621 # This value cannot be modified here.
8624 # Requires: 1 >= CYGINT_ISO_TERMIOS
8625 # CYGINT_ISO_TERMIOS == 0
8628 # The following properties are affected by this value
8629 # interface CYGINT_ISO_TERMIOS
8630 # Requires: 1 >= CYGINT_ISO_TERMIOS
8633 # POSIX termios implementation header
8635 cdl_option CYGBLD_ISO_TERMIOS_HEADER {
8637 # No user value, uncomment the following line to provide one.
8639 # value_source default
8640 # Default value: 0 0
8646 cdl_component CYGPKG_ISO_DLFCN {
8647 # There is no associated value.
8651 # Dynamic load implementations
8653 cdl_interface CYGINT_ISO_DLFCN {
8654 # No options implement this inferface
8655 # This value cannot be modified here.
8658 # Requires: 1 >= CYGINT_ISO_DLFCN
8659 # CYGINT_ISO_DLFCN == 0
8662 # The following properties are affected by this value
8663 # interface CYGINT_ISO_DLFCN
8664 # Requires: 1 >= CYGINT_ISO_DLFCN
8667 # Dynamic load implementation header
8669 cdl_option CYGBLD_ISO_DLFCN_HEADER {
8671 # No user value, uncomment the following line to provide one.
8673 # value_source default
8674 # Default value: 0 0
8678 # UNIX standard functions
8680 cdl_component CYGPKG_ISO_UNISTD {
8681 # There is no associated value.
8685 # POSIX timer operations implementations
8687 cdl_interface CYGINT_ISO_POSIX_TIMER_OPS {
8688 # No options implement this inferface
8689 # This value cannot be modified here.
8691 # Current value: 0 0
8692 # Requires: 1 >= CYGINT_ISO_POSIX_TIMER_OPS
8693 # CYGINT_ISO_POSIX_TIMER_OPS == 0
8696 # The following properties are affected by this value
8697 # interface CYGINT_ISO_POSIX_TIMER_OPS
8698 # Requires: 1 >= CYGINT_ISO_POSIX_TIMER_OPS
8701 # POSIX timer operations implementation header
8703 cdl_option CYGBLD_ISO_POSIX_TIMER_OPS_HEADER {
8705 # No user value, uncomment the following line to provide one.
8707 # value_source default
8708 # Default value: 0 0
8711 # POSIX sleep() implementations
8713 cdl_interface CYGINT_ISO_POSIX_SLEEP {
8714 # No options implement this inferface
8715 # This value cannot be modified here.
8717 # Current value: 0 0
8718 # Requires: 1 >= CYGINT_ISO_POSIX_SLEEP
8719 # CYGINT_ISO_POSIX_SLEEP == 0
8722 # The following properties are affected by this value
8723 # interface CYGINT_ISO_POSIX_SLEEP
8724 # Requires: 1 >= CYGINT_ISO_POSIX_SLEEP
8727 # POSIX sleep() implementation header
8729 cdl_option CYGBLD_ISO_POSIX_SLEEP_HEADER {
8731 # No user value, uncomment the following line to provide one.
8733 # value_source default
8734 # Default value: 0 0
8738 # select()/poll() functions
8740 cdl_component CYGPKG_ISO_SELECT {
8741 # There is no associated value.
8745 # select() implementations
8747 cdl_interface CYGINT_ISO_SELECT {
8748 # No options implement this inferface
8749 # This value cannot be modified here.
8751 # Current value: 0 0
8752 # Requires: 1 >= CYGINT_ISO_SELECT
8753 # CYGINT_ISO_SELECT == 0
8756 # The following properties are affected by this value
8757 # interface CYGINT_ISO_SELECT
8758 # Requires: 1 >= CYGINT_ISO_SELECT
8761 # select() implementation header
8763 cdl_option CYGBLD_ISO_SELECT_HEADER {
8765 # No user value, uncomment the following line to provide one.
8767 # value_source default
8768 # Default value: 0 0
8771 # poll() implementations
8773 cdl_interface CYGINT_ISO_POLL {
8774 # No options implement this inferface
8775 # This value cannot be modified here.
8777 # Current value: 0 0
8778 # Requires: 1 >= CYGINT_ISO_POLL
8779 # CYGINT_ISO_POLL == 0
8782 # The following properties are affected by this value
8783 # interface CYGINT_ISO_POLL
8784 # Requires: 1 >= CYGINT_ISO_POLL
8787 # poll() implementation header
8789 cdl_option CYGBLD_ISO_POLL_HEADER {
8791 # No user value, uncomment the following line to provide one.
8793 # value_source default
8794 # Default value: 0 0
8798 # NetDB utility functions
8800 cdl_component CYGPKG_ISO_NETDB {
8801 # There is no associated value.
8805 # DNS implementations
8807 cdl_interface CYGINT_ISO_DNS {
8808 # No options implement this inferface
8809 # This value cannot be modified here.
8812 # Requires: 1 >= CYGINT_ISO_DNS
8813 # CYGINT_ISO_DNS == 0
8816 # The following properties are affected by this value
8817 # interface CYGINT_ISO_DNS
8818 # Requires: 1 >= CYGINT_ISO_DNS
8821 # DNS implementation header
8823 cdl_option CYGBLD_ISO_DNS_HEADER {
8825 # No user value, uncomment the following line to provide one.
8827 # value_source default
8828 # Default value: 0 0
8831 # Protocol network database implementations
8833 cdl_interface CYGINT_ISO_NETDB_PROTO {
8834 # No options implement this inferface
8835 # This value cannot be modified here.
8838 # Requires: 1 >= CYGINT_ISO_NETDB_PROTO
8839 # CYGINT_ISO_NETDB_PROTO == 0
8842 # The following properties are affected by this value
8843 # interface CYGINT_ISO_NETDB_PROTO
8844 # Requires: 1 >= CYGINT_ISO_NETDB_PROTO
8847 # Protocol network database implementation header
8849 cdl_option CYGBLD_ISO_NETDB_PROTO_HEADER {
8851 # No user value, uncomment the following line to provide one.
8853 # value_source default
8854 # Default value: 0 0
8857 # Services network database implementations
8859 cdl_interface CYGINT_ISO_NETDB_SERV {
8860 # No options implement this inferface
8861 # This value cannot be modified here.
8864 # Requires: 1 >= CYGINT_ISO_NETDB_SERV
8865 # CYGINT_ISO_NETDB_SERV == 0
8868 # The following properties are affected by this value
8869 # interface CYGINT_ISO_NETDB_SERV
8870 # Requires: 1 >= CYGINT_ISO_NETDB_SERV
8873 # Services network database implementation header
8875 cdl_option CYGBLD_ISO_NETDB_SERV_HEADER {
8877 # No user value, uncomment the following line to provide one.
8879 # value_source default
8880 # Default value: 0 0
8885 # Package specific build options including control over
8886 # compiler flags used only in building this package,
8887 # and details of which tests are built.
8889 cdl_component CYGPKG_ISOINFRA_OPTIONS {
8890 # There is no associated value.
8894 # Additional compiler flags
8895 # This option modifies the set of compiler flags for
8896 # building the ISO C and POSIX infrastructure package.
8897 # These flags are used in addition to the set of global flags.
8899 cdl_option CYGPKG_ISOINFRA_CFLAGS_ADD {
8901 # No user value, uncomment the following line to provide one.
8903 # value_source default
8907 # Suppressed compiler flags
8908 # This option modifies the set of compiler flags for
8909 # building the ISO C and POSIX infrastructure package.
8910 # These flags are removed from the set of global flags
8913 cdl_option CYGPKG_ISOINFRA_CFLAGS_REMOVE {
8915 # No user value, uncomment the following line to provide one.
8917 # value_source default
8924 # doc: ref/services-crc.html
8925 # This package provides support for CRC calculation. Currently
8926 # this is the POSIX 1003 defined CRC algorithm, a 32 CRC by
8927 # Gary S. Brown, and a 16 bit CRC.
8929 cdl_package CYGPKG_CRC {
8930 # Packages cannot be added or removed, nor can their version be changed,
8931 # simply by editing their value. Instead the appropriate configuration
8932 # should be used to perform these actions.
8934 # This value cannot be modified here.
8936 # Current value: 1 current
8938 # The following properties are affected by this value
8939 # package CYGPKG_COMPRESS_ZLIB
8940 # Requires: CYGPKG_CRC
8946 cdl_option CYGPKG_CRC_TESTS {
8947 # Calculated value: "tests/crc_test"
8949 # Current_value: tests/crc_test
8953 # Zlib compress and decompress package
8954 # This package provides support for compression and
8957 cdl_package CYGPKG_COMPRESS_ZLIB {
8958 # Packages cannot be added or removed, nor can their version be changed,
8959 # simply by editing their value. Instead the appropriate configuration
8960 # should be used to perform these actions.
8962 # This value cannot be modified here.
8964 # Current value: 1 current
8965 # Requires: CYGPKG_ISOINFRA
8966 # CYGPKG_ISOINFRA == current
8968 # Requires: CYGPKG_CRC
8969 # CYGPKG_CRC == current
8972 # The following properties are affected by this value
8973 # component CYGBLD_BUILD_REDBOOT_WITH_ZLIB
8974 # ActiveIf: CYGPKG_COMPRESS_ZLIB
8978 # Override memory allocation routines.
8980 cdl_interface CYGINT_COMPRESS_ZLIB_LOCAL_ALLOC {
8981 # Implemented by CYGBLD_BUILD_REDBOOT_WITH_ZLIB, active, enabled
8982 # This value cannot be modified here.
8986 # The following properties are affected by this value
8987 # option CYGSEM_COMPRESS_ZLIB_NEEDS_MALLOC
8988 # ActiveIf: CYGINT_COMPRESS_ZLIB_LOCAL_ALLOC == 0
8991 # Should deflate() produce 'gzip' compatible output?
8992 # If this option is set then the output of calling deflate()
8993 # will be wrapped up as a 'gzip' compatible file.
8995 cdl_option CYGSEM_COMPRESS_ZLIB_DEFLATE_MAKES_GZIP {
8997 # No user value, uncomment the following line to provide one.
8999 # value_source default
9003 # Does this library need malloc?
9004 # This pseudo-option will force the memalloc library to be
9005 # required iff the application does not provide it's own
9008 cdl_option CYGSEM_COMPRESS_ZLIB_NEEDS_MALLOC {
9009 # This option is not active
9010 # ActiveIf constraint: CYGINT_COMPRESS_ZLIB_LOCAL_ALLOC == 0
9011 # CYGINT_COMPRESS_ZLIB_LOCAL_ALLOC == 1
9015 # No user value, uncomment the following line to provide one.
9017 # value_source default
9019 # Requires: CYGPKG_MEMALLOC
9020 # CYGPKG_MEMALLOC == current
9024 # Include stdio-like utility functions
9025 # This option enables the stdio-like zlib utility functions
9026 # (gzread/gzwrite and friends) provided in gzio.c.
9028 cdl_option CYGFUN_COMPRESS_ZLIB_GZIO {
9030 # No user value, uncomment the following line to provide one.
9032 # value_source default
9033 # Default value: CYGPKG_LIBC_STDIO_OPEN ? 1 : 0
9034 # CYGPKG_LIBC_STDIO_OPEN (unknown) == 0
9036 # Requires: CYGINT_ISO_STDIO_FILEPOS
9037 # CYGINT_ISO_STDIO_FILEPOS == 0
9039 # Requires: CYGINT_ISO_STRING_STRFUNCS
9040 # CYGINT_ISO_STRING_STRFUNCS == 1
9042 # Requires: CYGINT_ISO_STDIO_FORMATTED_IO
9043 # CYGINT_ISO_STDIO_FORMATTED_IO == 0
9045 # Requires: CYGINT_ISO_STDIO_FILEACCESS
9046 # CYGINT_ISO_STDIO_FILEACCESS == 0
9050 # Zlib compress and decompress package build options
9051 # Package specific build options including control over
9052 # compiler flags used only in building this package,
9053 # and details of which tests are built.
9055 cdl_component CYGPKG_COMPRESS_ZLIB_OPTIONS {
9056 # There is no associated value.
9060 # Additional compiler flags
9061 # This option modifies the set of compiler flags for
9062 # building this package. These flags are used in addition
9063 # to the set of global flags.
9065 cdl_option CYGPKG_COMPRESS_ZLIB_CFLAGS_ADD {
9067 # No user value, uncomment the following line to provide one.
9068 # user_value "-D__ECOS__ -DNO_ERRNO_H"
9069 # value_source default
9070 # Default value: "-D__ECOS__ -DNO_ERRNO_H"
9073 # Suppressed compiler flags
9074 # This option modifies the set of compiler flags for
9075 # building this package. These flags are removed from
9076 # the set of global flags if present.
9078 cdl_option CYGPKG_COMPRESS_ZLIB_CFLAGS_REMOVE {
9080 # No user value, uncomment the following line to provide one.
9081 # user_value -Wstrict-prototypes
9082 # value_source default
9083 # Default value: -Wstrict-prototypes
9086 # Additional compiler flags
9087 # This option modifies the set of compiler flags for
9088 # building this package. These flags are used in addition
9089 # to the set of global flags.
9091 cdl_option CYGPKG_COMPRESS_ZLIB_LDFLAGS_ADD {
9093 # No user value, uncomment the following line to provide one.
9095 # value_source default
9099 # Suppressed compiler flags
9100 # This option modifies the set of compiler flags for
9101 # building this package. These flags are removed from
9102 # the set of global flags if present.
9104 cdl_option CYGPKG_COMPRESS_ZLIB_LDFLAGS_REMOVE {
9106 # No user value, uncomment the following line to provide one.
9108 # value_source default
9115 cdl_option CYGPKG_COMPRESS_ZLIB_TESTS {
9116 # Calculated value: "tests/zlib1.c tests/zlib2.c"
9118 # Current_value: tests/zlib1.c tests/zlib2.c
9122 # FLASH device drivers
9123 # doc: ref/flash.html
9124 # This option enables drivers for basic I/O services on
9127 cdl_package CYGPKG_IO_FLASH {
9128 # Packages cannot be added or removed, nor can their version be changed,
9129 # simply by editing their value. Instead the appropriate configuration
9130 # should be used to perform these actions.
9132 # This value cannot be modified here.
9134 # Current value: 1 current
9135 # Requires: CYGPKG_ISOINFRA
9136 # CYGPKG_ISOINFRA == current
9138 # Requires: CYGINT_ISO_STRING_STRFUNCS
9139 # CYGINT_ISO_STRING_STRFUNCS == 1
9142 # The following properties are affected by this value
9143 # component CYGSEM_REDBOOT_FLASH_CONFIG
9144 # DefaultValue: CYGPKG_IO_FLASH != 0
9145 # package CYGPKG_DEVS_FLASH_ONMXC
9146 # ActiveIf: CYGPKG_IO_FLASH
9150 # Hardware FLASH device drivers
9151 # This option enables the hardware device drivers
9152 # for the current platform.
9154 cdl_interface CYGHWR_IO_FLASH_DEVICE {
9155 # Implemented by CYGPKG_DEVS_FLASH_ONMXC, active, enabled
9156 # This value cannot be modified here.
9160 # The following properties are affected by this value
9161 # component CYGPKG_REDBOOT_FLASH
9162 # ActiveIf: CYGHWR_IO_FLASH_DEVICE
9165 # Hardware FLASH device drivers are not in RAM
9166 # Use of this interface is deprecated.
9167 # Drivers should make sure that the functions are
9168 # linked to RAM by putting them in .2ram sections.
9170 cdl_interface CYGHWR_IO_FLASH_DEVICE_NOT_IN_RAM {
9171 # No options implement this inferface
9172 # This value cannot be modified here.
9174 # Current value: 0 0
9175 # Requires: !CYGHWR_IO_FLASH_DEVICE_NOT_IN_RAM
9176 # CYGHWR_IO_FLASH_DEVICE_NOT_IN_RAM == 0
9179 # The following properties are affected by this value
9180 # interface CYGHWR_IO_FLASH_DEVICE_NOT_IN_RAM
9181 # Requires: !CYGHWR_IO_FLASH_DEVICE_NOT_IN_RAM
9184 # Hardware can support block locking
9185 # This option will be enabled by devices which can support
9186 # locking (write-protection) of individual blocks.
9188 cdl_interface CYGHWR_IO_FLASH_BLOCK_LOCKING {
9189 # No options implement this inferface
9190 # This value cannot be modified here.
9192 # Current value: 0 0
9194 # The following properties are affected by this value
9195 # option CYGSEM_REDBOOT_FLASH_LOCK_SPECIAL
9196 # ActiveIf: CYGHWR_IO_FLASH_BLOCK_LOCKING != 0
9199 # Hardware cannot support direct access to FLASH memory
9200 # This option will be asserted by devices which cannot support
9201 # direct access to the FLASH memory contents (e.g. EEPROM or NAND
9202 # devices). In these cases, the driver must provide an appropriate
9203 # hardware access function.
9205 cdl_option CYGSEM_IO_FLASH_READ_INDIRECT {
9207 # No user value, uncomment the following line to provide one.
9209 # The inferred value should not be edited directly.
9211 # value_source inferred
9213 # Requires: !CYGSEM_IO_FLASH_VERIFY_PROGRAM
9214 # CYGSEM_IO_FLASH_VERIFY_PROGRAM == 0
9217 # The following properties are affected by this value
9218 # option CYGPRI_REDBOOT_ZLIB_FLASH
9219 # ActiveIf: (!CYGSEM_IO_FLASH_READ_INDIRECT) || CYGPRI_REDBOOT_ZLIB_FLASH_FORCE
9220 # component CYGHWR_DEVS_FLASH_MMC
9221 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9222 # option CYGHWR_DEVS_FLASH_MMC_ESDHC
9223 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9224 # option CYGHWR_DEVS_FLASH_MMC_SD
9225 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9226 # option CYGHWR_DEVS_FLASH_MXC_NAND
9227 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9230 # Display status messages during flash operations
9231 # Selecting this option will cause the drivers to print status
9232 # messages as various flash operations are undertaken.
9234 cdl_option CYGSEM_IO_FLASH_CHATTER {
9236 # No user value, uncomment the following line to provide one.
9238 # value_source default
9242 # Verify data programmed to flash
9243 # Selecting this option will cause verification of data
9244 # programmed to flash.
9246 cdl_option CYGSEM_IO_FLASH_VERIFY_PROGRAM {
9248 # No user value, uncomment the following line to provide one.
9250 # The inferred value should not be edited directly.
9252 # value_source inferred
9255 # The following properties are affected by this value
9256 # option CYGSEM_IO_FLASH_READ_INDIRECT
9257 # Requires: !CYGSEM_IO_FLASH_VERIFY_PROGRAM
9260 # Platform has flash soft DIP switch write-protect
9261 # Selecting this option will cause the state of a hardware jumper or
9262 # dipswitch to be read by software to determine whether the flash is
9263 # write-protected or not.
9265 cdl_option CYGSEM_IO_FLASH_SOFT_WRITE_PROTECT {
9267 # No user value, uncomment the following line to provide one.
9269 # value_source default
9273 # Instantiate in I/O block device API
9274 # Provides a block device accessible using the standard I/O
9275 # API ( cyg_io_read() etc. )
9277 cdl_component CYGPKG_IO_FLASH_BLOCK_DEVICE {
9278 # This option is not active
9279 # ActiveIf constraint: CYGPKG_IO
9280 # CYGPKG_IO (unknown) == 0
9284 # No user value, uncomment the following line to provide one.
9286 # value_source default
9291 # Name of flash device 1 block device
9293 cdl_component CYGDAT_IO_FLASH_BLOCK_DEVICE_NAME_1 {
9294 # This option is not active
9295 # The parent CYGPKG_IO_FLASH_BLOCK_DEVICE is not active
9296 # The parent CYGPKG_IO_FLASH_BLOCK_DEVICE is disabled
9299 # No user value, uncomment the following line to provide one.
9300 # user_value "\"/dev/flash1\""
9301 # value_source default
9302 # Default value: "\"/dev/flash1\""
9307 cdl_interface CYGINT_IO_FLASH_BLOCK_CFG_1 {
9308 # Implemented by CYGNUM_IO_FLASH_BLOCK_CFG_STATIC_1, inactive, enabled
9309 # Implemented by CYGNUM_IO_FLASH_BLOCK_CFG_FIS_1, inactive, disabled
9310 # This option is not active
9311 # The parent CYGDAT_IO_FLASH_BLOCK_DEVICE_NAME_1 is not active
9313 # This value cannot be modified here.
9316 # Requires: 1 == CYGINT_IO_FLASH_BLOCK_CFG_1
9317 # CYGINT_IO_FLASH_BLOCK_CFG_1 == 0
9320 # The following properties are affected by this value
9321 # interface CYGINT_IO_FLASH_BLOCK_CFG_1
9322 # Requires: 1 == CYGINT_IO_FLASH_BLOCK_CFG_1
9325 # Static configuration
9326 # This configures the flash device 1 block device
9327 # with static base and length
9329 cdl_component CYGNUM_IO_FLASH_BLOCK_CFG_STATIC_1 {
9330 # This option is not active
9331 # The parent CYGDAT_IO_FLASH_BLOCK_DEVICE_NAME_1 is not active
9334 # No user value, uncomment the following line to provide one.
9336 # value_source default
9341 # Start offset from flash base
9342 # This gives the offset from the base of flash which this
9343 # block device corresponds to.
9345 cdl_option CYGNUM_IO_FLASH_BLOCK_OFFSET_1 {
9346 # This option is not active
9347 # The parent CYGNUM_IO_FLASH_BLOCK_CFG_STATIC_1 is not active
9350 # No user value, uncomment the following line to provide one.
9351 # user_value 0x00100000
9352 # value_source default
9353 # Default value: 0x00100000
9357 # This gives the length of the region of flash given over
9358 # to this block device.
9360 cdl_option CYGNUM_IO_FLASH_BLOCK_LENGTH_1 {
9361 # This option is not active
9362 # The parent CYGNUM_IO_FLASH_BLOCK_CFG_STATIC_1 is not active
9365 # No user value, uncomment the following line to provide one.
9366 # user_value 0x00100000
9367 # value_source default
9368 # Default value: 0x00100000
9372 # Configuration from FIS
9373 # This configures the flash device 1 block device
9376 cdl_component CYGNUM_IO_FLASH_BLOCK_CFG_FIS_1 {
9377 # This option is not active
9378 # The parent CYGDAT_IO_FLASH_BLOCK_DEVICE_NAME_1 is not active
9381 # No user value, uncomment the following line to provide one.
9383 # value_source default
9390 cdl_component CYGDAT_IO_FLASH_BLOCK_FIS_NAME_1 {
9391 # This option is not active
9392 # The parent CYGNUM_IO_FLASH_BLOCK_CFG_FIS_1 is not active
9393 # The parent CYGNUM_IO_FLASH_BLOCK_CFG_FIS_1 is disabled
9396 # No user value, uncomment the following line to provide one.
9397 # user_value "\"jffs2\""
9398 # value_source default
9399 # Default value: "\"jffs2\""
9405 # Flash device driver build options
9406 # Package specific build options including control over
9407 # compiler flags used only in building this package,
9408 # and details of which tests are built.
9410 cdl_component CYGPKG_IO_FLASH_OPTIONS {
9411 # There is no associated value.
9415 # Additional compiler flags
9416 # This option modifies the set of compiler flags for
9417 # building the flash device drivers. These flags are used in addition
9418 # to the set of global flags.
9420 cdl_option CYGPKG_IO_FLASH_CFLAGS_ADD {
9422 # No user value, uncomment the following line to provide one.
9424 # value_source default
9428 # Suppressed compiler flags
9429 # This option modifies the set of compiler flags for
9430 # building the flash device drivers. These flags are removed from
9431 # the set of global flags if present.
9433 cdl_option CYGPKG_IO_FLASH_CFLAGS_REMOVE {
9435 # No user value, uncomment the following line to provide one.
9437 # value_source default
9441 # Flash device driver tests
9442 # This option specifies the set of tests for the flash device drivers.
9444 cdl_component CYGPKG_IO_FLASH_TESTS {
9445 # Calculated value: "tests/flash1"
9447 # Current_value: tests/flash1
9451 # Start offset from flash base
9452 # This gives the offset from the base of flash where tests
9453 # can be run. It is important to set this correctly, as an
9454 # incorrect value could allow the tests to write over critical
9455 # portions of the FLASH device and possibly render the target
9456 # board totally non-functional.
9458 cdl_option CYGNUM_IO_FLASH_TEST_OFFSET {
9460 # No user value, uncomment the following line to provide one.
9461 # user_value 0x00100000
9462 # value_source default
9463 # Default value: 0x00100000
9467 # This gives the length of the region of flash used for testing.
9469 cdl_option CYGNUM_IO_FLASH_TEST_LENGTH {
9471 # No user value, uncomment the following line to provide one.
9472 # user_value 0x00100000
9473 # value_source default
9474 # Default value: 0x00100000
9479 # Support FLASH memory on Freescale MXC platforms
9481 cdl_package CYGPKG_DEVS_FLASH_ONMXC {
9482 # Packages cannot be added or removed, nor can their version be changed,
9483 # simply by editing their value. Instead the appropriate configuration
9484 # should be used to perform these actions.
9486 # ActiveIf constraint: CYGPKG_IO_FLASH
9487 # CYGPKG_IO_FLASH == current
9490 # This value cannot be modified here.
9492 # Current value: 1 current
9496 # MXC platform MMC card support
9497 # When this option is enabled, it indicates MMC card is
9498 # supported on the MXC platforms
9500 cdl_component CYGHWR_DEVS_FLASH_MMC {
9502 # No user value, uncomment the following line to provide one.
9504 # value_source default
9506 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9507 # CYGSEM_IO_FLASH_READ_INDIRECT == 1
9510 # The following properties are affected by this value
9511 # option CYGHWR_DEVS_FLASH_MXC_MULTI
9512 # ActiveIf: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) ||
9513 # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) ||
9514 # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC)
9515 # option CYGHWR_DEVS_FLASH_MXC_MULTI
9516 # ActiveIf: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) ||
9517 # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) ||
9518 # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC)
9522 # MXC platform MMC card for newer SDHC controllers
9524 cdl_option CYGHWR_DEVS_FLASH_MMC_ESDHC {
9525 # This option is not active
9526 # The parent CYGHWR_DEVS_FLASH_MMC is disabled
9527 # ActiveIf constraint: CYGPKG_HAL_ARM_MX37 || CYGPKG_HAL_ARM_MX35 ||
9528 # CYGPKG_HAL_ARM_MX25 || CYGPKG_HAL_ARM_MX51 || CYGPKG_HAL_ARM_MX53
9529 # CYGPKG_HAL_ARM_MX37 (unknown) == 0
9530 # CYGPKG_HAL_ARM_MX35 (unknown) == 0
9531 # CYGPKG_HAL_ARM_MX25 (unknown) == 0
9532 # CYGPKG_HAL_ARM_MX51 (unknown) == 0
9533 # CYGPKG_HAL_ARM_MX53 == current
9537 # No user value, uncomment the following line to provide one.
9539 # value_source default
9541 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9542 # CYGSEM_IO_FLASH_READ_INDIRECT == 1
9546 # MXC platform MMC card for older MMC/SD controllers
9548 cdl_option CYGHWR_DEVS_FLASH_MMC_SD {
9549 # This option is not active
9550 # The parent CYGHWR_DEVS_FLASH_MMC is disabled
9551 # ActiveIf constraint: CYGPKG_HAL_ARM_MX31_3STACK || CYGPKG_HAL_ARM_MX31ADS
9552 # CYGPKG_HAL_ARM_MX31_3STACK (unknown) == 0
9553 # CYGPKG_HAL_ARM_MX31ADS (unknown) == 0
9557 # No user value, uncomment the following line to provide one.
9559 # value_source default
9561 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9562 # CYGSEM_IO_FLASH_READ_INDIRECT == 1
9567 # MXC platform NOR flash memory support
9568 # When this option is enabled, it indicates NOR flash is
9569 # supported on the MXC platforms
9571 cdl_option CYGHWR_DEVS_FLASH_MXC_NOR {
9573 # No user value, uncomment the following line to provide one.
9575 # The inferred value should not be edited directly.
9577 # value_source inferred
9580 # The following properties are affected by this value
9581 # option CYGHWR_DEVS_FLASH_IMX_SPI_NOR
9582 # Requires: CYGHWR_DEVS_FLASH_MXC_NOR == 1
9583 # option CYGHWR_DEVS_FLASH_MXC_MULTI
9584 # ActiveIf: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) ||
9585 # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) ||
9586 # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC)
9587 # option CYGHWR_DEVS_FLASH_MXC_MULTI
9588 # ActiveIf: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) ||
9589 # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) ||
9590 # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC)
9593 # MXC platform NAND flash memory support
9594 # When this option is enabled, it indicates NAND flash is
9595 # supported on the MXC platforms
9597 cdl_option CYGHWR_DEVS_FLASH_MXC_NAND {
9599 # No user value, uncomment the following line to provide one.
9601 # The inferred value should not be edited directly.
9603 # value_source inferred
9605 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9606 # CYGSEM_IO_FLASH_READ_INDIRECT == 1
9609 # The following properties are affected by this value
9610 # component CYGPKG_DEVS_FLASH_NAND_BBT_IN_FLASH
9611 # ActiveIf: CYGHWR_DEVS_FLASH_MXC_NAND
9612 # option CYGHWR_DEVS_FLASH_MXC_MULTI
9613 # ActiveIf: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) ||
9614 # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) ||
9615 # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC)
9616 # option CYGHWR_DEVS_FLASH_MXC_MULTI
9617 # ActiveIf: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) ||
9618 # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) ||
9619 # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC)
9620 # interface CYGHWR_DEVS_FLASH_MXC_NAND_RESET_WORKAROUND
9621 # ActiveIf: CYGHWR_DEVS_FLASH_MXC_NAND
9624 # i.MX platform SPI NOR flash memory support
9625 # When this option is enabled, it indicates SPI NOR flash is
9626 # supported on the i.MX platforms
9628 cdl_option CYGHWR_DEVS_FLASH_IMX_SPI_NOR {
9630 # No user value, uncomment the following line to provide one.
9632 # value_source default
9634 # Requires: CYGHWR_DEVS_FLASH_MXC_NOR == 1
9635 # CYGHWR_DEVS_FLASH_MXC_NOR == 0
9639 # MXC platform ATA support
9640 # When this option is enabled, it indicates ATA is
9641 # supported on the MXC platforms
9643 cdl_option CYGHWR_DEVS_FLASH_MXC_ATA {
9645 # No user value, uncomment the following line to provide one.
9647 # value_source default
9651 # Use a flash based Bad Block Table
9653 cdl_component CYGPKG_DEVS_FLASH_NAND_BBT_IN_FLASH {
9654 # ActiveIf constraint: CYGHWR_DEVS_FLASH_MXC_NAND
9655 # CYGHWR_DEVS_FLASH_MXC_NAND == 1
9658 # There is no associated value.
9662 # When this option is enabled, the driver will search for a flash
9663 # based bad block table
9665 cdl_option CYGHWR_DEVS_FLASH_MXC_BBT_IN_FLASH {
9667 # No user value, uncomment the following line to provide one.
9669 # value_source default
9673 # header file defining the NAND BBT descriptor
9674 # defines the name of the header file that describes the BBT layout
9676 cdl_component CYGHWR_FLASH_NAND_BBT_HEADER {
9678 # No user value, uncomment the following line to provide one.
9680 # The inferred value should not be edited directly.
9681 inferred_value 1 <cyg/io/tx53_nand_bbt.h>
9682 # value_source inferred
9683 # Default value: 0 0
9686 # Number of blocks to reserve for BBT
9687 # Number of blocks to reserve for BBT
9689 cdl_option CYGNUM_FLASH_NAND_BBT_BLOCKS {
9691 # No user value, uncomment the following line to provide one.
9693 # value_source default
9698 # MXC platform multi flash memory support
9699 # When this option is enabled, it indicates multi flashes are
9700 # supported on the MXC platforms (like NAND and NOR)
9702 cdl_option CYGHWR_DEVS_FLASH_MXC_MULTI {
9703 # This option is not active
9704 # ActiveIf constraint: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) ||
9705 # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) ||
9706 # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC)
9707 # CYGHWR_DEVS_FLASH_MXC_NAND == 1
9708 # CYGHWR_DEVS_FLASH_MXC_NOR == 0
9709 # CYGHWR_DEVS_FLASH_MXC_NAND == 1
9710 # CYGHWR_DEVS_FLASH_MMC == 0
9711 # CYGHWR_DEVS_FLASH_MXC_NOR == 0
9712 # CYGHWR_DEVS_FLASH_MMC == 0
9716 # No user value, uncomment the following line to provide one.
9718 # The inferred value should not be edited directly.
9720 # value_source inferred
9724 # MXC platform NAND flash reset workaround support
9725 # When this option is enabled, it indicates 0xFFFF is used for
9726 # the NAND reset command instead of 0xFF.
9728 cdl_interface CYGHWR_DEVS_FLASH_MXC_NAND_RESET_WORKAROUND {
9729 # No options implement this inferface
9730 # ActiveIf constraint: CYGHWR_DEVS_FLASH_MXC_NAND
9731 # CYGHWR_DEVS_FLASH_MXC_NAND == 1
9734 # This value cannot be modified here.
9741 # Dynamic memory allocation
9742 # doc: ref/memalloc.html
9743 # This package provides memory allocator infrastructure required for
9744 # dynamic memory allocators, including the ISO standard malloc
9745 # interface. It also contains some sample implementations.
9747 cdl_package CYGPKG_MEMALLOC {
9748 # Packages cannot be added or removed, nor can their version be changed,
9749 # simply by editing their value. Instead the appropriate configuration
9750 # should be used to perform these actions.
9752 # This value cannot be modified here.
9754 # Current value: 1 current
9756 # The following properties are affected by this value
9757 # option CYGSEM_COMPRESS_ZLIB_NEEDS_MALLOC
9758 # Requires: CYGPKG_MEMALLOC
9762 # Memory allocator implementations
9763 # This component contains configuration options related to the
9764 # various memory allocators available.
9766 cdl_component CYGPKG_MEMALLOC_ALLOCATORS {
9767 # There is no associated value.
9771 # Fixed block allocator
9772 # This component contains configuration options related to the
9773 # fixed block memory allocator.
9775 cdl_component CYGPKG_MEMALLOC_ALLOCATOR_FIXED {
9776 # There is no associated value.
9781 # With this option enabled, this allocator will be
9782 # made thread-safe. Additionally allocation functions
9783 # are made available that allow a thread to wait
9784 # until memory is available.
9786 cdl_option CYGSEM_MEMALLOC_ALLOCATOR_FIXED_THREADAWARE {
9787 # This option is not active
9788 # ActiveIf constraint: CYGPKG_KERNEL
9789 # CYGPKG_KERNEL (unknown) == 0
9793 # No user value, uncomment the following line to provide one.
9795 # value_source default
9800 # Simple variable block allocator
9801 # This component contains configuration options related to the
9802 # simple variable block memory allocator. This allocator is not
9803 # very fast, and in particular does not scale well with large
9804 # numbers of allocations. It is however very compact in terms of
9805 # code size and does not have very much overhead per allocation.
9807 cdl_component CYGPKG_MEMALLOC_ALLOCATOR_VARIABLE {
9808 # There is no associated value.
9813 # With this option enabled, this allocator will be
9814 # made thread-safe. Additionally allocation functions
9815 # are added that allow a thread to wait until memory
9816 # are made available that allow a thread to wait
9817 # until memory is available.
9819 cdl_option CYGSEM_MEMALLOC_ALLOCATOR_VARIABLE_THREADAWARE {
9820 # This option is not active
9821 # ActiveIf constraint: CYGPKG_KERNEL
9822 # CYGPKG_KERNEL (unknown) == 0
9826 # No user value, uncomment the following line to provide one.
9828 # value_source default
9833 # The variable-block memory allocator can perform coalescing
9834 # of memory whenever the application code releases memory back
9835 # to the pool. This coalescing reduces the possibility of
9836 # memory fragmentation problems, but involves extra code and
9839 cdl_option CYGSEM_MEMALLOC_ALLOCATOR_VARIABLE_COALESCE {
9841 # No user value, uncomment the following line to provide one.
9843 # value_source default
9846 # The following properties are affected by this value
9847 # option CYGIMP_MEMALLOC_MALLOC_VARIABLE_SIMPLE
9848 # Requires: CYGSEM_MEMALLOC_ALLOCATOR_VARIABLE_COALESCE
9853 # This component contains configuration options related to the
9854 # port of Doug Lea's memory allocator, normally known as
9855 # dlmalloc. dlmalloc has a reputation for being both fast
9856 # and space-conserving, as well as resisting fragmentation well.
9857 # It is a common choice for a general purpose allocator and
9858 # has been used in both newlib and Linux glibc.
9860 cdl_component CYGPKG_MEMALLOC_ALLOCATOR_DLMALLOC {
9861 # There is no associated value.
9866 # Doug Lea's malloc implementation has substantial amounts
9867 # of internal checking in order to verify the operation
9868 # and consistency of the allocator. However this imposes
9869 # substantial overhead on each operation. Therefore this
9870 # checking may be individually disabled.
9872 cdl_option CYGDBG_MEMALLOC_ALLOCATOR_DLMALLOC_DEBUG {
9874 # No user value, uncomment the following line to provide one.
9876 # value_source default
9877 # Default value: 0 != CYGDBG_USE_ASSERTS
9878 # CYGDBG_USE_ASSERTS == 0
9880 # Requires: CYGDBG_USE_ASSERTS
9881 # CYGDBG_USE_ASSERTS == 0
9886 # With this option enabled, this allocator will be
9887 # made thread-safe. Additionally allocation functions
9888 # are made available that allow a thread to wait
9889 # until memory is available.
9891 cdl_option CYGIMP_MEMALLOC_ALLOCATOR_DLMALLOC_THREADAWARE {
9892 # This option is not active
9893 # ActiveIf constraint: CYGPKG_KERNEL
9894 # CYGPKG_KERNEL (unknown) == 0
9898 # No user value, uncomment the following line to provide one.
9900 # value_source default
9902 # Requires: CYGPKG_KERNEL
9903 # CYGPKG_KERNEL (unknown) == 0
9907 # Support more than one instance
9908 # Having this option disabled allows important
9909 # implementation structures to be declared as a single
9910 # static instance, allowing faster access. However this
9911 # would fail if there is more than one instance of
9912 # the dlmalloc allocator class. Therefore this option can
9913 # be enabled if multiple instances are required. Note: as
9914 # a special case, if this allocator is used as the
9915 # implementation of malloc, and it can be determined there
9916 # is more than one malloc pool, then this option will be
9919 cdl_option CYGIMP_MEMALLOC_ALLOCATOR_DLMALLOC_SAFE_MULTIPLE {
9921 # No user value, uncomment the following line to provide one.
9923 # value_source default
9927 # Use system memmove() and memset()
9928 # This may be used to control whether memset() and memmove()
9929 # are used within the implementation. The alternative is
9930 # to use some macro equivalents, which some people report
9931 # are faster in some circumstances.
9933 cdl_option CYGIMP_MEMALLOC_ALLOCATOR_DLMALLOC_USE_MEMCPY {
9935 # No user value, uncomment the following line to provide one.
9937 # value_source default
9938 # Default value: 0 != CYGPKG_ISOINFRA
9939 # CYGPKG_ISOINFRA == current
9941 # Requires: CYGPKG_ISOINFRA
9942 # CYGPKG_ISOINFRA == current
9946 # Minimum alignment of allocated blocks
9947 # This option controls the minimum alignment that the
9948 # allocated memory blocks are aligned on, specified as
9949 # 2^N. Note that using large mininum alignments can lead
9950 # to excessive memory wastage.
9952 cdl_option CYGNUM_MEMALLOC_ALLOCATOR_DLMALLOC_ALIGNMENT {
9954 # No user value, uncomment the following line to provide one.
9956 # value_source default
9958 # Legal values: 3 to 10
9962 # Variable block allocator with separate metadata
9963 # This component contains configuration options related to the
9964 # variable block memory allocator with separate metadata.
9966 cdl_component CYGPKG_MEMALLOC_ALLOCATOR_SEPMETA {
9967 # There is no associated value.
9972 # With this option enabled, this allocator will be
9973 # made thread-safe. Additionally allocation functions
9974 # are made available that allow a thread to wait
9975 # until memory is available.
9977 cdl_option CYGSEM_MEMALLOC_ALLOCATOR_SEPMETA_THREADAWARE {
9978 # This option is not active
9979 # ActiveIf constraint: CYGPKG_KERNEL
9980 # CYGPKG_KERNEL (unknown) == 0
9984 # No user value, uncomment the following line to provide one.
9986 # value_source default
9992 # Kernel C API support for memory allocation
9993 # This option must be enabled to provide the extensions required
9994 # to support integration into the kernel C API.
9996 cdl_option CYGFUN_MEMALLOC_KAPI {
9997 # This option is not active
9998 # ActiveIf constraint: CYGPKG_KERNEL
9999 # CYGPKG_KERNEL (unknown) == 0
10003 # No user value, uncomment the following line to provide one.
10005 # value_source default
10006 # Default value: CYGFUN_KERNEL_API_C
10007 # CYGFUN_KERNEL_API_C (unknown) == 0
10011 # malloc(0) returns NULL
10012 # This option controls the behavior of malloc(0) ( or calloc with
10013 # either argument 0 ). It is permitted by the standard to return
10014 # either a NULL pointer or a unique pointer. Enabling this option
10015 # forces a NULL pointer to be returned.
10017 cdl_option CYGSEM_MEMALLOC_MALLOC_ZERO_RETURNS_NULL {
10019 # No user value, uncomment the following line to provide one.
10021 # value_source default
10025 # Breakpoint site when running out of memory
10026 # Whenever the system runs out of memory, it invokes this function
10027 # before either going to sleep waiting for memory to become
10028 # available or returning failure.
10030 cdl_option CYGSEM_MEMALLOC_INVOKE_OUT_OF_MEMORY {
10032 # No user value, uncomment the following line to provide one.
10034 # value_source default
10038 # malloc() and supporting allocators
10039 # This component enables support for dynamic memory
10040 # allocation as supplied by the functions malloc(),
10041 # free(), calloc() and realloc(). As these
10042 # functions are often used, but can have quite an
10043 # overhead, disabling them here can ensure they
10044 # cannot even be used accidentally when static
10045 # allocation is preferred. Within this component are
10046 # various allocators that can be selected for use
10047 # as the underlying implementation of the dynamic
10048 # allocation functions.
10050 cdl_component CYGPKG_MEMALLOC_MALLOC_ALLOCATORS {
10051 # ActiveIf constraint: CYGPKG_ISOINFRA
10052 # CYGPKG_ISOINFRA == current
10056 # No user value, uncomment the following line to provide one.
10058 # value_source default
10063 # Use external heap definition
10064 # This option allows other components in the
10065 # system to override the default system
10066 # provision of heap memory pools. This should
10067 # be set to a header which provides the equivalent
10068 # definitions to <pkgconf/heaps.hxx>.
10070 cdl_component CYGBLD_MEMALLOC_MALLOC_EXTERNAL_HEAP_H {
10072 # No user value, uncomment the following line to provide one.
10074 # value_source default
10075 # Default value: 0 0
10078 # Use external implementation of joining multiple heaps
10079 # The default implementation of joining multiple heaps
10080 # is fine for the case where there are multiple disjoint
10081 # memory regions of the same type. However, in a system
10082 # there might be e.g. a small amount of internal SRAM and
10083 # a large amount of external DRAM. The SRAM is faster and
10084 # the DRAM is slower. An application can implement some
10085 # heuristic to choose which pool to allocate from. This
10086 # heuristic can be highly application specific.
10088 cdl_component CYGBLD_MEMALLOC_MALLOC_EXTERNAL_JOIN_H {
10090 # No user value, uncomment the following line to provide one.
10092 # value_source default
10093 # Default value: 0 0
10096 # malloc() allocator implementations
10098 cdl_interface CYGINT_MEMALLOC_MALLOC_ALLOCATORS {
10099 # Implemented by CYGIMP_MEMALLOC_MALLOC_VARIABLE_SIMPLE, active, disabled
10100 # Implemented by CYGIMP_MEMALLOC_MALLOC_DLMALLOC, active, enabled
10101 # This value cannot be modified here.
10104 # Requires: CYGINT_MEMALLOC_MALLOC_ALLOCATORS == 1
10105 # CYGINT_MEMALLOC_MALLOC_ALLOCATORS == 1
10108 # The following properties are affected by this value
10109 # interface CYGINT_MEMALLOC_MALLOC_ALLOCATORS
10110 # Requires: CYGINT_MEMALLOC_MALLOC_ALLOCATORS == 1
10113 # malloc() implementation instantiation data
10114 # Memory allocator implementations that are capable of being
10115 # used underneath malloc() must be instantiated. The code
10116 # to do this is set in this option. It is only intended to
10117 # be set by the implementation, not the user.
10119 cdl_option CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER {
10121 # No user value, uncomment the following line to provide one.
10122 # user_value <cyg/memalloc/dlmalloc.hxx>
10123 # value_source default
10124 # Default value: <cyg/memalloc/dlmalloc.hxx>
10126 # The following properties are affected by this value
10127 # option CYGIMP_MEMALLOC_MALLOC_VARIABLE_SIMPLE
10128 # Requires: CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER == "<cyg/memalloc/memvar.hxx>"
10129 # option CYGIMP_MEMALLOC_MALLOC_DLMALLOC
10130 # Requires: CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER == "<cyg/memalloc/dlmalloc.hxx>"
10133 # Simple variable block implementation
10134 # This causes malloc() to use the simple
10135 # variable block allocator.
10137 cdl_option CYGIMP_MEMALLOC_MALLOC_VARIABLE_SIMPLE {
10139 # No user value, uncomment the following line to provide one.
10141 # value_source default
10143 # Requires: CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER == "<cyg/memalloc/memvar.hxx>"
10144 # CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER == <cyg/memalloc/dlmalloc.hxx>
10146 # Requires: CYGSEM_MEMALLOC_ALLOCATOR_VARIABLE_COALESCE
10147 # CYGSEM_MEMALLOC_ALLOCATOR_VARIABLE_COALESCE == 1
10151 # Doug Lea's malloc implementation
10152 # This causes malloc() to use a version of Doug Lea's
10153 # malloc (dlmalloc) as the underlying implementation.
10155 cdl_option CYGIMP_MEMALLOC_MALLOC_DLMALLOC {
10157 # No user value, uncomment the following line to provide one.
10159 # value_source default
10161 # Requires: CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER == "<cyg/memalloc/dlmalloc.hxx>"
10162 # CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER == <cyg/memalloc/dlmalloc.hxx>
10167 # Size of the fallback dynamic memory pool in bytes
10168 # If *no* heaps are configured in your memory layout,
10169 # dynamic memory allocation by
10170 # malloc() and calloc() must be from a fixed-size,
10171 # contiguous memory pool (note here that it is the
10172 # pool that is of a fixed size, but malloc() is still
10173 # able to allocate variable sized chunks of memory
10174 # from it). This option is the size
10175 # of that pool, in bytes. Note that not all of
10176 # this is available for programs to
10177 # use - some is needed for internal information
10178 # about memory regions, and some may be lost to
10179 # ensure that memory allocation only returns
10180 # memory aligned on word (or double word)
10181 # boundaries - a very common architecture
10184 cdl_option CYGNUM_MEMALLOC_FALLBACK_MALLOC_POOL_SIZE {
10186 # No user value, uncomment the following line to provide one.
10188 # value_source default
10189 # Default value: 16384
10190 # Legal values: 32 to 0x7fffffff
10193 # Common memory allocator package build options
10194 # Package specific build options including control over
10195 # compiler flags used only in building this package,
10196 # and details of which tests are built.
10198 cdl_component CYGPKG_MEMALLOC_OPTIONS {
10199 # There is no associated value.
10203 # Additional compiler flags
10204 # This option modifies the set of compiler flags for
10205 # building this package. These flags are used in addition
10206 # to the set of global flags.
10208 cdl_option CYGPKG_MEMALLOC_CFLAGS_ADD {
10210 # No user value, uncomment the following line to provide one.
10211 # user_value "-fno-rtti -Woverloaded-virtual"
10212 # value_source default
10213 # Default value: "-fno-rtti -Woverloaded-virtual"
10216 # Suppressed compiler flags
10217 # This option modifies the set of compiler flags for
10218 # building this package. These flags are removed from
10219 # the set of global flags if present.
10221 cdl_option CYGPKG_MEMALLOC_CFLAGS_REMOVE {
10223 # No user value, uncomment the following line to provide one.
10224 # user_value -Wno-pointer-sign
10225 # value_source default
10226 # Default value: -Wno-pointer-sign
10230 # This option specifies the set of tests for this package.
10232 cdl_option CYGPKG_MEMALLOC_TESTS {
10233 # Calculated value: "tests/dlmalloc1 tests/dlmalloc2 tests/heaptest tests/kmemfix1 tests/kmemvar1 tests/malloc1 tests/malloc2 tests/malloc3 tests/malloc4 tests/memfix1 tests/memfix2 tests/memvar1 tests/memvar2 tests/realloc tests/sepmeta1 tests/sepmeta2"
10235 # Current_value: tests/dlmalloc1 tests/dlmalloc2 tests/heaptest tests/kmemfix1 tests/kmemvar1 tests/malloc1 tests/malloc2 tests/malloc3 tests/malloc4 tests/memfix1 tests/memfix2 tests/memvar1 tests/memvar2 tests/realloc tests/sepmeta1 tests/sepmeta2
10240 # Common error code support
10241 # This package contains the common list of error and
10242 # status codes. It is held centrally to allow
10243 # packages to interchange error codes and status
10244 # codes in a common way, rather than each package
10245 # having its own conventions for error/status
10246 # reporting. The error codes are modelled on the
10247 # POSIX style naming e.g. EINVAL etc. This package
10248 # also provides the standard strerror() function to
10249 # convert error codes to textual representation, as
10250 # well as an implementation of the errno idiom.
10252 cdl_package CYGPKG_ERROR {
10253 # Packages cannot be added or removed, nor can their version be changed,
10254 # simply by editing their value. Instead the appropriate configuration
10255 # should be used to perform these actions.
10257 # This value cannot be modified here.
10259 # Current value: 1 current
10260 # Requires: CYGBLD_ISO_ERRNO_CODES_HEADER == "<cyg/error/codes.h>"
10261 # CYGBLD_ISO_ERRNO_CODES_HEADER == <cyg/error/codes.h>
10267 # This package controls the behaviour of the
10268 # errno variable (or more strictly, expression)
10271 cdl_component CYGPKG_ERROR_ERRNO {
10273 # No user value, uncomment the following line to provide one.
10275 # value_source default
10277 # Requires: CYGBLD_ISO_ERRNO_HEADER == "<cyg/error/errno.h>"
10278 # CYGBLD_ISO_ERRNO_HEADER == <cyg/error/errno.h>
10284 # This option controls whether the standard error
10285 # code reporting variable errno is a per-thread
10286 # variable, rather than global.
10288 cdl_option CYGSEM_ERROR_PER_THREAD_ERRNO {
10290 # No user value, uncomment the following line to provide one.
10292 # The inferred value should not be edited directly.
10294 # value_source inferred
10296 # Requires: CYGVAR_KERNEL_THREADS_DATA
10297 # CYGVAR_KERNEL_THREADS_DATA (unknown) == 0
10302 # Trace verbosity level for debugging the errno
10303 # retrieval mechanism in errno.cxx. Increase this
10304 # value to get additional trace output.
10306 cdl_option CYGNUM_ERROR_ERRNO_TRACE_LEVEL {
10308 # No user value, uncomment the following line to provide one.
10310 # value_source default
10312 # Legal values: 0 to 1
10316 # strerror function
10317 # This package controls the presence and behaviour of the
10318 # strerror() function from <string.h>
10320 cdl_option CYGPKG_ERROR_STRERROR {
10322 # No user value, uncomment the following line to provide one.
10324 # value_source default
10326 # Requires: CYGBLD_ISO_STRERROR_HEADER == "<cyg/error/strerror.h>"
10327 # CYGBLD_ISO_STRERROR_HEADER == <cyg/error/strerror.h>
10331 # Error package build options
10332 # Package specific build options including control over
10333 # compiler flags used only in building this package,
10334 # and details of which tests are built.
10336 cdl_component CYGPKG_ERROR_OPTIONS {
10337 # There is no associated value.
10341 # Additional compiler flags
10342 # This option modifies the set of compiler flags for
10343 # building the error package. These flags are used in addition
10344 # to the set of global flags.
10346 cdl_option CYGPKG_ERROR_CFLAGS_ADD {
10348 # No user value, uncomment the following line to provide one.
10350 # value_source default
10351 # Default value: ""
10354 # Suppressed compiler flags
10355 # This option modifies the set of compiler flags for
10356 # building the error package. These flags are removed from
10357 # the set of global flags if present.
10359 cdl_option CYGPKG_ERROR_CFLAGS_REMOVE {
10361 # No user value, uncomment the following line to provide one.
10363 # value_source default
10364 # Default value: ""
10369 # I2C driver for FSL MXC-based platforms
10371 cdl_package CYGPKG_DEVS_MXC_I2C {
10372 # Packages cannot be added or removed, nor can their version be changed,
10373 # simply by editing their value. Instead the appropriate configuration
10374 # should be used to perform these actions.
10376 # This value cannot be modified here.
10378 # Current value: 1 current
10381 # ipu driver for mxc
10383 cdl_package CYGPKG_DEVS_IMX_IPU {
10384 # Packages cannot be added or removed, nor can their version be changed,
10385 # simply by editing their value. Instead the appropriate configuration
10386 # should be used to perform these actions.
10388 # This value cannot be modified here.
10390 # Current value: 1 current
10392 # The following properties are affected by this value
10393 # option CYGHWR_MX53_LCD_LOGO
10394 # ActiveIf: CYGPKG_DEVS_IMX_IPU
10398 # IPU version 3EX support
10399 # When this option is enabled, it indicates the IPU version
10402 cdl_option CYGHWR_DEVS_IPU_3_EX {
10404 # No user value, uncomment the following line to provide one.
10406 # The inferred value should not be edited directly.
10408 # value_source inferred
10412 # IPU version 3D support
10413 # When this option is enabled, it indicates the IPU version
10416 cdl_option CYGHWR_DEVS_IPU_3_D {
10418 # No user value, uncomment the following line to provide one.
10420 # value_source default