X-Git-Url: https://git.kernelconcepts.de/?a=blobdiff_plain;f=README;h=2dc098462dd3cdb0d151928efa0b31ce3e8d05b5;hb=d484b52e6fcb28dc011ce45718294496c6ea83d0;hp=61e2e1ffc7952935ee150b1397483befeff21e6a;hpb=33a35bbbe09a9b63b46e86a97d5dfbdae5481401;p=karo-tx-uboot.git

diff --git a/README b/README
index 61e2e1ffc7..2dc098462d 100644
--- a/README
+++ b/README
@@ -363,6 +363,12 @@ The following options need to be configured:
 		ICache only when Code runs from RAM.
 
 - 85xx CPU Options:
+		CONFIG_SYS_PPC64
+
+		Specifies that the core is a 64-bit PowerPC implementation (implements
+		the "64" category of the Power ISA). This is necessary for ePAPR
+		compliance, among other possible reasons.
+
 		CONFIG_SYS_FSL_TBCLK_DIV
 
 		Defines the core time base clock divider ratio compared to the
@@ -805,9 +811,11 @@ The following options need to be configured:
 		CONFIG_CMD_EEPROM	* EEPROM read/write support
 		CONFIG_CMD_ELF		* bootelf, bootvx
 		CONFIG_CMD_EXPORTENV	* export the environment
+		CONFIG_CMD_EXT2		* ext2 command support
+		CONFIG_CMD_EXT4		* ext4 command support
 		CONFIG_CMD_SAVEENV	  saveenv
 		CONFIG_CMD_FDC		* Floppy Disk Support
-		CONFIG_CMD_FAT		* FAT partition support
+		CONFIG_CMD_FAT		* FAT command support
 		CONFIG_CMD_FDOS		* Dos diskette Support
 		CONFIG_CMD_FLASH	  flinfo, erase, protect
 		CONFIG_CMD_FPGA		  FPGA device initialization support
@@ -1037,6 +1045,9 @@ The following options need to be configured:
 		devices.
 		CONFIG_SYS_SCSI_SYM53C8XX_CCF to fix clock timing (80Mhz)
 
+                The environment variable 'scsidevs' is set to the number of
+                SCSI devices found during the last scan.
+
 - NETWORK Support (PCI):
 		CONFIG_E1000
 		Support for Intel 8254x/8257x gigabit chips.
@@ -1088,7 +1099,7 @@ The following options need to be configured:
 		CONFIG_CALXEDA_XGMAC
 		Support for the Calxeda XGMAC device
 
-		CONFIG_DRIVER_LAN91C96
+		CONFIG_LAN91C96
 		Support for SMSC's LAN91C96 chips.
 
 			CONFIG_LAN91C96_BASE
@@ -1098,7 +1109,7 @@ The following options need to be configured:
 			CONFIG_LAN91C96_USE_32_BIT
 			Define this to enable 32 bit addressing
 
-		CONFIG_DRIVER_SMC91111
+		CONFIG_SMC91111
 		Support for SMSC's LAN91C111 chip
 
 			CONFIG_SMC91111_BASE
@@ -1320,6 +1331,13 @@ The following options need to be configured:
 		This will also enable the command "fatwrite" enabling the
 		user to write files to FAT.
 
+CBFS (Coreboot Filesystem) support
+		CONFIG_CMD_CBFS
+
+		Define this to enable support for reading from a Coreboot
+		filesystem. Available commands are cbfsinit, cbfsinfo, cbfsls
+		and cbfsload.
+
 - Keyboard Support:
 		CONFIG_ISA_KEYBOARD
 
@@ -1451,6 +1469,11 @@ The following options need to be configured:
 		Normally display is black on white background; define
 		CONFIG_SYS_WHITE_ON_BLACK to get it inverted.
 
+		CONFIG_LCD_BMP_RLE8
+
+		Support drawing of RLE8-compressed bitmaps on the LCD.
+
+
 - Splash Screen Support: CONFIG_SPLASH_SCREEN
 
 		If this option is set, the environment is checked for
@@ -2173,8 +2196,8 @@ The following options need to be configured:
 		following board configurations are known to be
 		"pRAM-clean":
 
-			ETX094, IVMS8, IVML24, SPD8xx, TQM8xxL,
-			HERMES, IP860, RPXlite, LWMON, LANTEC,
+			IVMS8, IVML24, SPD8xx, TQM8xxL,
+			HERMES, IP860, RPXlite, LWMON,
 			FLAGADM, TQM8260
 
 - Error Recovery:
@@ -2300,6 +2323,12 @@ The following options need to be configured:
 		- CONFIG_SYS_VENDOR
 		- CONFIG_SYS_SOC
 
+		CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
+
+		Define this in order to add variables describing certain
+		run-time determined information about the hardware to the
+		environment.  These will be named board_name, board_rev.
+
 - DataFlash Support:
 		CONFIG_HAS_DATAFLASH