X-Git-Url: https://git.kernelconcepts.de/?a=blobdiff_plain;f=README;h=7129df822c17c9c9bc5c7089ec54b0fed6381d01;hb=ea51a6282316f383fa04defa30ea15feb36d5d69;hp=52a92e73b8e161126264aea58b4977119047c16d;hpb=0f507779ca00d90cdd4bcc8252630370339b7ea6;p=karo-tx-uboot.git diff --git a/README b/README index 52a92e73b8..7129df822c 100644 --- a/README +++ b/README @@ -132,6 +132,10 @@ Directory Hierarchy: ==================== /arch Architecture specific files + /arc Files generic to ARC architecture + /cpu CPU specific files + /arc700 Files specific to ARC 700 CPUs + /lib Architecture specific library files /arm Files generic to ARM architecture /cpu CPU specific files /arm720t Files specific to ARM 720 CPUs @@ -164,7 +168,7 @@ Directory Hierarchy: /mips Files generic to MIPS architecture /cpu CPU specific files /mips32 Files specific to MIPS32 CPUs - /xburst Files specific to Ingenic XBurst CPUs + /mips64 Files specific to MIPS64 CPUs /lib Architecture specific library files /nds32 Files generic to NDS32 architecture /cpu CPU specific files @@ -260,6 +264,17 @@ e.g. "make cogent_mpc8xx_config". And also configure the cogent directory according to the instructions in cogent/README. +Sandbox Environment: +-------------------- + +U-Boot can be built natively to run on a Linux host using the 'sandbox' +board. This allows feature development which is not board- or architecture- +specific to be undertaken on a native platform. The sandbox is also used to +run some of U-Boot's tests. + +See board/sandbox/sandbox/README.sandbox for more details. + + Configuration Options: ---------------------- @@ -306,14 +321,6 @@ The following options need to be configured: the LCD display every second with a "rotator" |\-/|\-/ -- Board flavour: (if CONFIG_MPC8260ADS is defined) - CONFIG_ADSTYPE - Possible values are: - CONFIG_SYS_8260ADS - original MPC8260ADS - CONFIG_SYS_8266ADS - MPC8266ADS - CONFIG_SYS_PQ2FADS - PQ2FADS-ZU or PQ2FADS-VR - CONFIG_SYS_8272ADS - MPC8272ADS - - Marvell Family Member CONFIG_SYS_MVFS - define it if you want to enable multiple fs option at one time @@ -427,7 +434,21 @@ The following options need to be configured: In this mode, a single differential clock is used to supply clocks to the sysclock, ddrclock and usbclock. + CONFIG_SYS_CPC_REINIT_F + This CONFIG is defined when the CPC is configured as SRAM at the + time of U-boot entry and is required to be re-initialized. + + CONFIG_DEEP_SLEEP + Inidcates this SoC supports deep sleep feature. If deep sleep is + supported, core will start to execute uboot when wakes up. + - Generic CPU options: + CONFIG_SYS_GENERIC_GLOBAL_DATA + Defines global data is initialized in generic board board_init_f(). + If this macro is defined, global data is created and cleared in + generic board board_init_f(). Without this macro, architecture/board + should initialize global data before calling board_init_f(). + CONFIG_SYS_BIG_ENDIAN, CONFIG_SYS_LITTLE_ENDIAN Defines the endianess of the CPU. Implementation of those @@ -454,6 +475,9 @@ The following options need to be configured: CONFIG_SYS_FSL_DDRC_GEN3 Freescale DDR3 controller. + CONFIG_SYS_FSL_DDRC_GEN4 + Freescale DDR4 controller. + CONFIG_SYS_FSL_DDRC_ARM_GEN3 Freescale DDR3 controller for ARM-based SoCs. @@ -469,7 +493,15 @@ The following options need to be configured: CONFIG_SYS_FSL_DDR3 Board config to use DDR3. It can be enabled for SoCs with - Freescale DDR3 controllers. + Freescale DDR3 or DDR3L controllers. + + CONFIG_SYS_FSL_DDR3L + Board config to use DDR3L. It can be enabled for SoCs with + DDR3L controllers. + + CONFIG_SYS_FSL_DDR4 + Board config to use DDR4. It can be enabled for SoCs with + DDR4 controllers. CONFIG_SYS_FSL_IFC_BE Defines the IFC controller register space as Big Endian @@ -486,6 +518,10 @@ The following options need to be configured: PBI commands can be used to configure SoC before it starts the execution. Please refer doc/README.pblimage for more details + CONFIG_SPL_FSL_PBL + It adds a target to create boot binary having SPL binary in PBI format + concatenated with u-boot binary. + CONFIG_SYS_FSL_DDR_BE Defines the DDR controller register space as Big Endian @@ -713,6 +749,10 @@ The following options need to be configured: boot loader that has already initialized the UART. Define this variable to flush the UART at init time. + CONFIG_SERIAL_HW_FLOW_CONTROL + + Define this variable to enable hw flow control in serial driver. + Current user of this option is drivers/serial/nsl16550.c driver - Console Interface: Depending on board, define exactly one serial port @@ -1384,9 +1424,6 @@ The following options need to be configured: CONFIG_USB_EHCI_TXFIFO_THRESH enables setting of the txfilltuning field in the EHCI controller on reset. - CONFIG_USB_HUB_MIN_POWER_ON_DELAY defines the minimum - interval for usb hub power-on delay.(minimum 100msec) - - USB Device: Define the below if you wish to use the USB console. Once firmware is rebuilt from a serial console issue the @@ -1457,13 +1494,6 @@ The following options need to be configured: for your device - CONFIG_USBD_PRODUCTID 0xFFFF - Some USB device drivers may need to check USB cable attachment. - In this case you can enable following config in BoardName.h: - CONFIG_USB_CABLE_CHECK - This enables function definition: - - usb_cable_connected() in include/usb.h - Implementation of this function is board-specific. - - ULPI Layer Support: The ULPI (UTMI Low Pin (count) Interface) PHYs are supported via the generic ULPI layer. The generic layer accesses the ULPI PHY @@ -1493,6 +1523,16 @@ The following options need to be configured: CONFIG_SH_MMCIF_CLK Define the clock frequency for MMCIF + CONFIG_GENERIC_MMC + Enable the generic MMC driver + + CONFIG_SUPPORT_EMMC_BOOT + Enable some additional features of the eMMC boot partitions. + + CONFIG_SUPPORT_EMMC_RPMB + Enable the commands for reading, writing and programming the + key for the Replay Protection Memory Block partition in eMMC. + - USB Device Firmware Update (DFU) class support: CONFIG_DFU_FUNCTION This enables the USB portion of the DFU USB class @@ -1538,6 +1578,28 @@ The following options need to be configured: entering dfuMANIFEST state. Host waits this timeout, before sending again an USB request to the device. +- USB Device Android Fastboot support: + CONFIG_CMD_FASTBOOT + This enables the command "fastboot" which enables the Android + fastboot mode for the platform's USB device. Fastboot is a USB + protocol for downloading images, flashing and device control + used on Android devices. + See doc/README.android-fastboot for more information. + + CONFIG_ANDROID_BOOT_IMAGE + This enables support for booting images which use the Android + image format header. + + CONFIG_USB_FASTBOOT_BUF_ADDR + The fastboot protocol requires a large memory buffer for + downloads. Define this to the starting RAM address to use for + downloaded images. + + CONFIG_USB_FASTBOOT_BUF_SIZE + The fastboot protocol requires a large memory buffer for + downloads. This buffer should be as large as possible for a + platform. Define this to the size available RAM for fastboot. + - Journaling Flash filesystem support: CONFIG_JFFS2_NAND, CONFIG_JFFS2_NAND_OFF, CONFIG_JFFS2_NAND_SIZE, CONFIG_JFFS2_NAND_DEV @@ -1572,6 +1634,12 @@ CBFS (Coreboot Filesystem) support filesystem. Available commands are cbfsinit, cbfsinfo, cbfsls and cbfsload. +- FAT(File Allocation Table) filesystem cluster size: + CONFIG_FS_FAT_MAX_CLUSTSIZE + + Define the max cluster size for fat operations else + a default value of 65536 will be defined. + - Keyboard Support: CONFIG_ISA_KEYBOARD @@ -2509,6 +2577,19 @@ CBFS (Coreboot Filesystem) support Specify the number of FPGA devices to support. + CONFIG_CMD_FPGA_LOADMK + + Enable support for fpga loadmk command + + CONFIG_CMD_FPGA_LOADP + + Enable support for fpga loadp command - load partial bitstream + + CONFIG_CMD_FPGA_LOADBP + + Enable support for fpga loadbp command - load partial bitstream + (Xilinx only) + CONFIG_SYS_FPGA_PROG_FEEDBACK Enable printing of hash marks during FPGA configuration. @@ -3116,6 +3197,19 @@ FIT uImage format: -150 common/cmd_nand.c Incorrect FIT image format 151 common/cmd_nand.c FIT image format OK +- legacy image format: + CONFIG_IMAGE_FORMAT_LEGACY + enables the legacy image format support in U-Boot. + + Default: + enabled if CONFIG_FIT_SIGNATURE is not defined. + + CONFIG_DISABLE_IMAGE_LEGACY + disable the legacy image format + + This define is introduced, as the legacy image format is + enabled per default for backward compatibility. + - FIT image support: CONFIG_FIT Enable support for the FIT uImage format. @@ -3132,6 +3226,11 @@ FIT uImage format: using a hash signed and verified using RSA. See doc/uImage.FIT/signature.txt for more details. + WARNING: When relying on signed FIT images with required + signature check the legacy image format is default + disabled. If a board need legacy image format support + enable this through CONFIG_IMAGE_FORMAT_LEGACY + - Standalone program support: CONFIG_STANDALONE_LOAD_ADDR @@ -3255,6 +3354,10 @@ FIT uImage format: supports MMC, NAND and YMODEM loading of U-Boot and NAND NAND loading of the Linux Kernel. + CONFIG_SPL_OS_BOOT + Enable booting directly to an OS from SPL. + See also: doc/README.falcon + CONFIG_SPL_DISPLAY_PRINT For ARM, enable an optional function to print more information about the running system. @@ -3313,6 +3416,9 @@ FIT uImage format: continuing (the hardware starts execution after just loading the first page rather than the full 4K). + CONFIG_SPL_SKIP_RELOCATE + Avoid SPL relocation + CONFIG_SPL_NAND_BASE Include nand_base.c in the SPL. Requires CONFIG_SPL_NAND_DRIVERS. @@ -3327,6 +3433,10 @@ FIT uImage format: Support for NAND boot using simple NAND drivers that expose the cmd_ctrl() interface. + CONFIG_SPL_MTD_SUPPORT + Support for the MTD subsystem within SPL. Useful for + environment on NAND support within SPL. + CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT Set for the SPL on PPC mpc8xxx targets, support for drivers/ddr/fsl/libddr.o in SPL binary. @@ -4489,6 +4599,11 @@ Low Level (hardware related) configuration options: - CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC: Enables the RTC32K OSC on AM33xx based plattforms +- CONFIG_SYS_NAND_NO_SUBPAGE_WRITE + Option to disable subpage write in NAND driver + driver that uses this: + drivers/mtd/nand/davinci_nand.c + Freescale QE/FMAN Firmware Support: ----------------------------------- @@ -4498,8 +4613,13 @@ This firmware often needs to be loaded during U-Boot booting, so macros are used to identify the storage device (NOR flash, SPI, etc) and the address within that device. -- CONFIG_SYS_QE_FMAN_FW_ADDR - The address in the storage device where the firmware is located. The +- CONFIG_SYS_FMAN_FW_ADDR + The address in the storage device where the FMAN microcode is located. The + meaning of this address depends on which CONFIG_SYS_QE_FW_IN_xxx macro + is also specified. + +- CONFIG_SYS_QE_FW_ADDR + The address in the storage device where the QE microcode is located. The meaning of this address depends on which CONFIG_SYS_QE_FW_IN_xxx macro is also specified.