X-Git-Url: https://git.kernelconcepts.de/?a=blobdiff_plain;f=README;h=766e9e0ebd88f05741ea6cf34657ace277dd75d6;hb=1d5c20154f0797e9a79fd0b39a9ae8a8801f6a51;hp=0a0f528af117e94f86918078b23b7ec8c5561f96;hpb=2c19478e01ab145c8b3a1f5b1beca9958d942e98;p=karo-tx-uboot.git

diff --git a/README b/README
index 0a0f528af1..766e9e0ebd 100644
--- a/README
+++ b/README
@@ -272,7 +272,7 @@ board. This allows feature development which is not board- or architecture-
 specific to be undertaken on a native platform. The sandbox is also used to
 run some of U-Boot's tests.
 
-See board/sandbox/sandbox/README.sandbox for more details.
+See board/sandbox/README.sandbox for more details.
 
 
 Configuration Options:
@@ -1629,6 +1629,16 @@ The following options need to be configured:
 		downloads. This buffer should be as large as possible for a
 		platform. Define this to the size available RAM for fastboot.
 
+		CONFIG_FASTBOOT_FLASH
+		The fastboot protocol includes a "flash" command for writing
+		the downloaded image to a non-volatile storage device. Define
+		this to enable the "fastboot flash" command.
+
+		CONFIG_FASTBOOT_FLASH_MMC_DEV
+		The fastboot "flash" command requires additional information
+		regarding the non-volatile storage device. Define this to
+		the eMMC device that fastboot should use to store the image.
+
 - Journaling Flash filesystem support:
 		CONFIG_JFFS2_NAND, CONFIG_JFFS2_NAND_OFF, CONFIG_JFFS2_NAND_SIZE,
 		CONFIG_JFFS2_NAND_DEV
@@ -3849,12 +3859,9 @@ Configuration Settings:
 		The memory will be freed (or in fact just forgotton) when
 		U-Boot relocates itself.
 
-		Pre-relocation malloc() is only supported on sandbox
+		Pre-relocation malloc() is only supported on ARM and sandbox
 		at present but is fairly easy to enable for other archs.
 
-		Pre-relocation malloc() is only supported on ARM at present
-		but is fairly easy to enable for other archs.
-
 - CONFIG_SYS_BOOTM_LEN:
 		Normally compressed uImages are limited to an
 		uncompressed size of 8 MBytes. If this is not enough,