X-Git-Url: https://git.kernelconcepts.de/?a=blobdiff_plain;f=configs%2FIppo_q8h_v5_defconfig;h=53168604da20ba4081863b00905d1fb762a99f81;hb=2aced54ed9c830400f38ddf92676fe28ae149027;hp=50c2f9366ed9e87197e2d2099adadc52c01795a4;hpb=9b416a9f4ca7cf5ac4d5f7143d67edde7f7d7326;p=karo-tx-uboot.git

diff --git a/configs/Ippo_q8h_v5_defconfig b/configs/Ippo_q8h_v5_defconfig
index 50c2f9366e..53168604da 100644
--- a/configs/Ippo_q8h_v5_defconfig
+++ b/configs/Ippo_q8h_v5_defconfig
@@ -1,8 +1,24 @@
-CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=5"
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_MACH_SUN8I=y
-CONFIG_TARGET_IPPO_Q8H_V5=y
-CONFIG_DEFAULT_DEVICE_TREE="sun8i-a23-ippo-q8h-v5.dtb"
-CONFIG_VIDEO=n
-CONFIG_USB_KEYBOARD=n
+CONFIG_MACH_SUN8I_A23=y
+CONFIG_DRAM_CLK=480
+CONFIG_DRAM_ZQ=63351
+CONFIG_USB0_VBUS_PIN="AXP0-VBUS-ENABLE"
+CONFIG_USB0_VBUS_DET="AXP0-VBUS-DETECT"
+CONFIG_USB0_ID_DET="PH8"
+CONFIG_AXP_GPIO=y
+CONFIG_VIDEO_LCD_MODE="x:800,y:480,depth:18,pclk_khz:33000,le:87,ri:168,up:31,lo:13,hs:1,vs:1,sync:3,vmode:0"
+CONFIG_VIDEO_LCD_DCLK_PHASE=0
+CONFIG_VIDEO_LCD_POWER="PH7"
+CONFIG_VIDEO_LCD_BL_EN="PH6"
+CONFIG_VIDEO_LCD_BL_PWM="PH0"
+CONFIG_DEFAULT_DEVICE_TREE="sun8i-a23-ippo-q8h-v5"
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL=y
+CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=5"
+# CONFIG_CMD_IMLS is not set
+# CONFIG_CMD_FLASH is not set
+# CONFIG_CMD_FPGA is not set
+CONFIG_AXP221_DLDO1_VOLT=3300
+CONFIG_AXP221_ALDO1_VOLT=3000
+CONFIG_USB_MUSB_HOST=y