X-Git-Url: https://git.kernelconcepts.de/?a=blobdiff_plain;f=drivers%2Fgpu%2Fdrm%2Fi915%2Fintel_dsi.c;h=61d69c214508e68fe61a349d3bd4a60c132bffb7;hb=44cc6c08da0b6c8321c6740bbb6a0c6feb45b2c2;hp=4a601cf90f16c68d694babd065bbae09cbe6e9f7;hpb=65c61bc5dbbcfa1ff38e58aa834cb9a88e84a886;p=karo-tx-linux.git

diff --git a/drivers/gpu/drm/i915/intel_dsi.c b/drivers/gpu/drm/i915/intel_dsi.c
index 4a601cf90f16..61d69c214508 100644
--- a/drivers/gpu/drm/i915/intel_dsi.c
+++ b/drivers/gpu/drm/i915/intel_dsi.c
@@ -557,7 +557,7 @@ static void intel_dsi_clear_device_ready(struct intel_encoder *encoder)
 		usleep_range(2000, 2500);
 	}
 
-	vlv_disable_dsi_pll(encoder);
+	intel_disable_dsi_pll(encoder);
 }
 
 static void intel_dsi_post_disable(struct intel_encoder *encoder)
@@ -654,6 +654,7 @@ intel_dsi_mode_valid(struct drm_connector *connector,
 {
 	struct intel_connector *intel_connector = to_intel_connector(connector);
 	struct drm_display_mode *fixed_mode = intel_connector->panel.fixed_mode;
+	int max_dotclk = to_i915(connector->dev)->max_dotclk_freq;
 
 	DRM_DEBUG_KMS("\n");
 
@@ -667,6 +668,8 @@ intel_dsi_mode_valid(struct drm_connector *connector,
 			return MODE_PANEL;
 		if (mode->vdisplay > fixed_mode->vdisplay)
 			return MODE_PANEL;
+		if (fixed_mode->clock > max_dotclk)
+			return MODE_CLOCK_HIGH;
 	}
 
 	return MODE_OK;
@@ -734,6 +737,21 @@ static void set_dsi_timings(struct drm_encoder *encoder,
 	hbp = txbyteclkhs(hbp, bpp, lane_count, intel_dsi->burst_mode_ratio);
 
 	for_each_dsi_port(port, intel_dsi->ports) {
+		if (IS_BROXTON(dev)) {
+			/*
+			 * Program hdisplay and vdisplay on MIPI transcoder.
+			 * This is different from calculated hactive and
+			 * vactive, as they are calculated per channel basis,
+			 * whereas these values should be based on resolution.
+			 */
+			I915_WRITE(BXT_MIPI_TRANS_HACTIVE(port),
+					mode->hdisplay);
+			I915_WRITE(BXT_MIPI_TRANS_VACTIVE(port),
+					mode->vdisplay);
+			I915_WRITE(BXT_MIPI_TRANS_VTOTAL(port),
+					mode->vtotal);
+		}
+
 		I915_WRITE(MIPI_HACTIVE_AREA_COUNT(port), hactive);
 		I915_WRITE(MIPI_HFP_COUNT(port), hfp);
 
@@ -774,16 +792,39 @@ static void intel_dsi_prepare(struct intel_encoder *intel_encoder)
 	}
 
 	for_each_dsi_port(port, intel_dsi->ports) {
-		/* escape clock divider, 20MHz, shared for A and C.
-		 * device ready must be off when doing this! txclkesc? */
-		tmp = I915_READ(MIPI_CTRL(PORT_A));
-		tmp &= ~ESCAPE_CLOCK_DIVIDER_MASK;
-		I915_WRITE(MIPI_CTRL(PORT_A), tmp | ESCAPE_CLOCK_DIVIDER_1);
-
-		/* read request priority is per pipe */
-		tmp = I915_READ(MIPI_CTRL(port));
-		tmp &= ~READ_REQUEST_PRIORITY_MASK;
-		I915_WRITE(MIPI_CTRL(port), tmp | READ_REQUEST_PRIORITY_HIGH);
+		if (IS_VALLEYVIEW(dev)) {
+			/*
+			 * escape clock divider, 20MHz, shared for A and C.
+			 * device ready must be off when doing this! txclkesc?
+			 */
+			tmp = I915_READ(MIPI_CTRL(PORT_A));
+			tmp &= ~ESCAPE_CLOCK_DIVIDER_MASK;
+			I915_WRITE(MIPI_CTRL(PORT_A), tmp |
+					ESCAPE_CLOCK_DIVIDER_1);
+
+			/* read request priority is per pipe */
+			tmp = I915_READ(MIPI_CTRL(port));
+			tmp &= ~READ_REQUEST_PRIORITY_MASK;
+			I915_WRITE(MIPI_CTRL(port), tmp |
+					READ_REQUEST_PRIORITY_HIGH);
+		} else if (IS_BROXTON(dev)) {
+			/*
+			 * FIXME:
+			 * BXT can connect any PIPE to any MIPI port.
+			 * Select the pipe based on the MIPI port read from
+			 * VBT for now. Pick PIPE A for MIPI port A and C
+			 * for port C.
+			 */
+			tmp = I915_READ(MIPI_CTRL(port));
+			tmp &= ~BXT_PIPE_SELECT_MASK;
+
+			if (port == PORT_A)
+				tmp |= BXT_PIPE_SELECT_A;
+			else if (port == PORT_C)
+				tmp |= BXT_PIPE_SELECT_C;
+
+			I915_WRITE(MIPI_CTRL(port), tmp);
+		}
 
 		/* XXX: why here, why like this? handling in irq handler?! */
 		I915_WRITE(MIPI_INTR_STAT(port), 0xffffffff);
@@ -860,6 +901,17 @@ static void intel_dsi_prepare(struct intel_encoder *intel_encoder)
 		I915_WRITE(MIPI_INIT_COUNT(port),
 				txclkesc(intel_dsi->escape_clk_div, 100));
 
+		if (IS_BROXTON(dev) && (!intel_dsi->dual_link)) {
+			/*
+			 * BXT spec says write MIPI_INIT_COUNT for
+			 * both the ports, even if only one is
+			 * getting used. So write the other port
+			 * if not in dual link mode.
+			 */
+			I915_WRITE(MIPI_INIT_COUNT(port ==
+						PORT_A ? PORT_C : PORT_A),
+					intel_dsi->init_count);
+		}
 
 		/* recovery disables */
 		I915_WRITE(MIPI_EOT_DISABLE(port), tmp);
@@ -911,8 +963,8 @@ static void intel_dsi_pre_pll_enable(struct intel_encoder *encoder)
 	DRM_DEBUG_KMS("\n");
 
 	intel_dsi_prepare(encoder);
+	intel_enable_dsi_pll(encoder);
 
-	vlv_enable_dsi_pll(encoder);
 }
 
 static enum drm_connector_status
@@ -1048,11 +1100,7 @@ void intel_dsi_init(struct drm_device *dev)
 	intel_connector->unregister = intel_connector_unregister;
 
 	/* Pipe A maps to MIPI DSI port A, pipe B maps to MIPI DSI port C */
-	if (dev_priv->vbt.dsi.config->dual_link) {
-		/* XXX: does dual link work on either pipe? */
-		intel_encoder->crtc_mask = (1 << PIPE_A);
-		intel_dsi->ports = ((1 << PORT_A) | (1 << PORT_C));
-	} else if (dev_priv->vbt.dsi.port == DVO_PORT_MIPIA) {
+	if (dev_priv->vbt.dsi.port == DVO_PORT_MIPIA) {
 		intel_encoder->crtc_mask = (1 << PIPE_A);
 		intel_dsi->ports = (1 << PORT_A);
 	} else if (dev_priv->vbt.dsi.port == DVO_PORT_MIPIC) {
@@ -1060,6 +1108,9 @@ void intel_dsi_init(struct drm_device *dev)
 		intel_dsi->ports = (1 << PORT_C);
 	}
 
+	if (dev_priv->vbt.dsi.config->dual_link)
+		intel_dsi->ports = ((1 << PORT_A) | (1 << PORT_C));
+
 	/* Create a DSI host (and a device) for each port. */
 	for_each_dsi_port(port, intel_dsi->ports) {
 		struct intel_dsi_host *host;