X-Git-Url: https://git.kernelconcepts.de/?a=blobdiff_plain;f=drivers%2Fnet%2Fwireless%2Fath%2Fwil6210%2Fmain.c;h=6ca6193ab8a6100ac6257e24745d4575e17648a9;hb=02201e3f1b46aed7c6348f406b7b40de80ba6de3;hp=c2a238426425462c7ff40f61c8e98fec9dadca6d;hpb=0faef837e431b4984652f4a14d2075bed108a04d;p=karo-tx-linux.git diff --git a/drivers/net/wireless/ath/wil6210/main.c b/drivers/net/wireless/ath/wil6210/main.c index c2a238426425..6ca6193ab8a6 100644 --- a/drivers/net/wireless/ath/wil6210/main.c +++ b/drivers/net/wireless/ath/wil6210/main.c @@ -25,6 +25,10 @@ #define WAIT_FOR_DISCONNECT_TIMEOUT_MS 2000 #define WAIT_FOR_DISCONNECT_INTERVAL_MS 10 +bool debug_fw; /* = false; */ +module_param(debug_fw, bool, S_IRUGO); +MODULE_PARM_DESC(debug_fw, " do not perform card reset. For FW debug"); + bool no_fw_recovery; module_param(no_fw_recovery, bool, S_IRUGO | S_IWUSR); MODULE_PARM_DESC(no_fw_recovery, " disable automatic FW error recovery"); @@ -58,7 +62,7 @@ static int mtu_max_set(const char *val, const struct kernel_param *kp) return ret; } -static struct kernel_param_ops mtu_max_ops = { +static const struct kernel_param_ops mtu_max_ops = { .set = mtu_max_set, .get = param_get_uint, }; @@ -87,7 +91,7 @@ static int ring_order_set(const char *val, const struct kernel_param *kp) return 0; } -static struct kernel_param_ops ring_order_ops = { +static const struct kernel_param_ops ring_order_ops = { .set = ring_order_set, .get = param_get_uint, }; @@ -96,6 +100,8 @@ module_param_cb(rx_ring_order, &ring_order_ops, &rx_ring_order, S_IRUGO); MODULE_PARM_DESC(rx_ring_order, " Rx ring order; size = 1 << order"); module_param_cb(tx_ring_order, &ring_order_ops, &tx_ring_order, S_IRUGO); MODULE_PARM_DESC(tx_ring_order, " Tx ring order; size = 1 << order"); +module_param_cb(bcast_ring_order, &ring_order_ops, &bcast_ring_order, S_IRUGO); +MODULE_PARM_DESC(bcast_ring_order, " Bcast ring order; size = 1 << order"); #define RST_DELAY (20) /* msec, for loop in @wil_target_reset */ #define RST_COUNT (1 + 1000/RST_DELAY) /* round up to be above 1 sec total */ @@ -146,7 +152,6 @@ __acquires(&sta->tid_rx_lock) __releases(&sta->tid_rx_lock) wil_dbg_misc(wil, "%s(CID %d, status %d)\n", __func__, cid, sta->status); - sta->data_port_open = false; if (sta->status != wil_sta_unused) { if (!from_event) wmi_disconnect_sta(wil, sta->addr, reason_code); @@ -224,7 +229,7 @@ static void _wil6210_disconnect(struct wil6210_priv *wil, const u8 *bssid, if (test_bit(wil_status_fwconnected, wil->status)) { clear_bit(wil_status_fwconnected, wil->status); cfg80211_disconnected(ndev, reason_code, - NULL, 0, GFP_KERNEL); + NULL, 0, false, GFP_KERNEL); } else if (test_bit(wil_status_fwconnecting, wil->status)) { cfg80211_connect_result(ndev, bssid, NULL, 0, NULL, 0, WLAN_STATUS_UNSPECIFIED_FAILURE, @@ -373,9 +378,10 @@ int wil_bcast_init(struct wil6210_priv *wil) if (ri < 0) return ri; + wil->bcast_vring = ri; rc = wil_vring_init_bcast(wil, ri, 1 << bcast_ring_order); - if (rc == 0) - wil->bcast_vring = ri; + if (rc) + wil->bcast_vring = -1; return rc; } @@ -547,7 +553,7 @@ static inline void wil_release_cpu(struct wil6210_priv *wil) static int wil_target_reset(struct wil6210_priv *wil) { int delay = 0; - u32 x; + u32 x, x1 = 0; wil_dbg_misc(wil, "Resetting \"%s\"...\n", wil->hw_name); @@ -602,12 +608,16 @@ static int wil_target_reset(struct wil6210_priv *wil) do { msleep(RST_DELAY); x = R(RGF_USER_BL + offsetof(struct RGF_BL, ready)); + if (x1 != x) { + wil_dbg_misc(wil, "BL.ready 0x%08x => 0x%08x\n", x1, x); + x1 = x; + } if (delay++ > RST_COUNT) { wil_err(wil, "Reset not completed, bl.ready 0x%08x\n", x); return -ETIME; } - } while (!(x & BIT_BL_READY)); + } while (x != BIT_BL_READY); C(RGF_USER_CLKS_CTL_0, BIT_USER_CLKS_RST_PWGD); @@ -686,6 +696,17 @@ int wil_reset(struct wil6210_priv *wil, bool load_fw) WARN_ON(!mutex_is_locked(&wil->mutex)); WARN_ON(test_bit(wil_status_napi_en, wil->status)); + if (debug_fw) { + static const u8 mac[ETH_ALEN] = { + 0x00, 0xde, 0xad, 0x12, 0x34, 0x56, + }; + struct net_device *ndev = wil_to_ndev(wil); + + ether_addr_copy(ndev->perm_addr, mac); + ether_addr_copy(ndev->dev_addr, ndev->perm_addr); + return 0; + } + cancel_work_sync(&wil->disconnect_worker); wil6210_disconnect(wil, NULL, WLAN_REASON_DEAUTH_LEAVING, false); wil_bcast_fini(wil);