X-Git-Url: https://git.kernelconcepts.de/?a=blobdiff_plain;f=drivers%2Fnet%2Fwireless%2Fbrcm80211%2Fbrcmfmac%2Fcfg80211.c;h=deb5f78dcacc0d9ef188360d300a7b4f1bcfba19;hb=1b1050cdc5cdde43177b375b5f22dc070d45d8f8;hp=cee9ff46626e984d74291c96bd953a9f7e18093c;hpb=46f3b6ee483898095906023e1ba3af2bddc38af9;p=karo-tx-linux.git diff --git a/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c index cee9ff46626e..deb5f78dcacc 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c @@ -236,89 +236,6 @@ static int brcmf_roamoff; module_param_named(roamoff, brcmf_roamoff, int, S_IRUSR); MODULE_PARM_DESC(roamoff, "do not use internal roaming engine"); -/* Quarter dBm units to mW - * Table starts at QDBM_OFFSET, so the first entry is mW for qdBm=153 - * Table is offset so the last entry is largest mW value that fits in - * a u16. - */ - -#define QDBM_OFFSET 153 /* Offset for first entry */ -#define QDBM_TABLE_LEN 40 /* Table size */ - -/* Smallest mW value that will round up to the first table entry, QDBM_OFFSET. - * Value is ( mW(QDBM_OFFSET - 1) + mW(QDBM_OFFSET) ) / 2 - */ -#define QDBM_TABLE_LOW_BOUND 6493 /* Low bound */ - -/* Largest mW value that will round down to the last table entry, - * QDBM_OFFSET + QDBM_TABLE_LEN-1. - * Value is ( mW(QDBM_OFFSET + QDBM_TABLE_LEN - 1) + - * mW(QDBM_OFFSET + QDBM_TABLE_LEN) ) / 2. - */ -#define QDBM_TABLE_HIGH_BOUND 64938 /* High bound */ - -static const u16 nqdBm_to_mW_map[QDBM_TABLE_LEN] = { -/* qdBm: +0 +1 +2 +3 +4 +5 +6 +7 */ -/* 153: */ 6683, 7079, 7499, 7943, 8414, 8913, 9441, 10000, -/* 161: */ 10593, 11220, 11885, 12589, 13335, 14125, 14962, 15849, -/* 169: */ 16788, 17783, 18836, 19953, 21135, 22387, 23714, 25119, -/* 177: */ 26607, 28184, 29854, 31623, 33497, 35481, 37584, 39811, -/* 185: */ 42170, 44668, 47315, 50119, 53088, 56234, 59566, 63096 -}; - -static u16 brcmf_qdbm_to_mw(u8 qdbm) -{ - uint factor = 1; - int idx = qdbm - QDBM_OFFSET; - - if (idx >= QDBM_TABLE_LEN) - /* clamp to max u16 mW value */ - return 0xFFFF; - - /* scale the qdBm index up to the range of the table 0-40 - * where an offset of 40 qdBm equals a factor of 10 mW. - */ - while (idx < 0) { - idx += 40; - factor *= 10; - } - - /* return the mW value scaled down to the correct factor of 10, - * adding in factor/2 to get proper rounding. - */ - return (nqdBm_to_mW_map[idx] + factor / 2) / factor; -} - -static u8 brcmf_mw_to_qdbm(u16 mw) -{ - u8 qdbm; - int offset; - uint mw_uint = mw; - uint boundary; - - /* handle boundary case */ - if (mw_uint <= 1) - return 0; - - offset = QDBM_OFFSET; - - /* move mw into the range of the table */ - while (mw_uint < QDBM_TABLE_LOW_BOUND) { - mw_uint *= 10; - offset -= 40; - } - - for (qdbm = 0; qdbm < QDBM_TABLE_LEN - 1; qdbm++) { - boundary = nqdBm_to_mW_map[qdbm] + (nqdBm_to_mW_map[qdbm + 1] - - nqdBm_to_mW_map[qdbm]) / 2; - if (mw_uint < boundary) - break; - } - - qdbm += (u8) offset; - - return qdbm; -} static u16 chandef_to_chanspec(struct brcmu_d11inf *d11inf, struct cfg80211_chan_def *ch) @@ -860,6 +777,37 @@ brcmf_cfg80211_change_iface(struct wiphy *wiphy, struct net_device *ndev, s32 err = 0; brcmf_dbg(TRACE, "Enter, idx=%d, type=%d\n", ifp->bssidx, type); + + /* WAR: There are a number of p2p interface related problems which + * need to be handled initially (before doing the validate). + * wpa_supplicant tends to do iface changes on p2p device/client/go + * which are not always possible/allowed. However we need to return + * OK otherwise the wpa_supplicant wont start. The situation differs + * on configuration and setup (p2pon=1 module param). The first check + * is to see if the request is a change to station for p2p iface. + */ + if ((type == NL80211_IFTYPE_STATION) && + ((vif->wdev.iftype == NL80211_IFTYPE_P2P_CLIENT) || + (vif->wdev.iftype == NL80211_IFTYPE_P2P_GO) || + (vif->wdev.iftype == NL80211_IFTYPE_P2P_DEVICE))) { + brcmf_dbg(TRACE, "Ignoring cmd for p2p if\n"); + /* Now depending on whether module param p2pon=1 was used the + * response needs to be either 0 or EOPNOTSUPP. The reason is + * that if p2pon=1 is used, but a newer supplicant is used then + * we should return an error, as this combination wont work. + * In other situations 0 is returned and supplicant will start + * normally. It will give a trace in cfg80211, but it is the + * only way to get it working. Unfortunately this will result + * in situation where we wont support new supplicant in + * combination with module param p2pon=1, but that is the way + * it is. If the user tries this then unloading of driver might + * fail/lock. + */ + if (cfg->p2p.p2pdev_dynamically) + return -EOPNOTSUPP; + else + return 0; + } err = brcmf_vif_change_validate(wiphy_to_cfg(wiphy), vif, type); if (err) { brcmf_err("iface validation failed: err=%d\n", err); @@ -875,18 +823,6 @@ brcmf_cfg80211_change_iface(struct wiphy *wiphy, struct net_device *ndev, infra = 0; break; case NL80211_IFTYPE_STATION: - /* Ignore change for p2p IF. Unclear why supplicant does this */ - if ((vif->wdev.iftype == NL80211_IFTYPE_P2P_CLIENT) || - (vif->wdev.iftype == NL80211_IFTYPE_P2P_GO)) { - brcmf_dbg(TRACE, "Ignoring cmd for p2p if\n"); - /* WAR: It is unexpected to get a change of VIF for P2P - * IF, but it happens. The request can not be handled - * but returning EPERM causes a crash. Returning 0 - * without setting ieee80211_ptr->iftype causes trace - * (WARN_ON) but it works with wpa_supplicant - */ - return 0; - } infra = 1; break; case NL80211_IFTYPE_AP: @@ -904,7 +840,6 @@ brcmf_cfg80211_change_iface(struct wiphy *wiphy, struct net_device *ndev, err = brcmf_p2p_ifchange(cfg, BRCMF_FIL_P2P_IF_GO); } if (!err) { - set_bit(BRCMF_VIF_STATUS_AP_CREATING, &vif->sme_state); brcmf_dbg(INFO, "IF Type = AP\n"); } } else { @@ -2017,16 +1952,14 @@ static s32 brcmf_cfg80211_set_tx_power(struct wiphy *wiphy, struct wireless_dev *wdev, enum nl80211_tx_power_setting type, s32 mbm) { - struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy); struct net_device *ndev = cfg_to_ndev(cfg); struct brcmf_if *ifp = netdev_priv(ndev); - u16 txpwrmw; - s32 err = 0; - s32 disable = 0; - s32 dbm = MBM_TO_DBM(mbm); + s32 err; + s32 disable; + u32 qdbm = 127; - brcmf_dbg(TRACE, "Enter\n"); + brcmf_dbg(TRACE, "Enter %d %d\n", type, mbm); if (!check_vif_up(ifp->vif)) return -EIO; @@ -2035,12 +1968,20 @@ brcmf_cfg80211_set_tx_power(struct wiphy *wiphy, struct wireless_dev *wdev, break; case NL80211_TX_POWER_LIMITED: case NL80211_TX_POWER_FIXED: - if (dbm < 0) { + if (mbm < 0) { brcmf_err("TX_POWER_FIXED - dbm is negative\n"); err = -EINVAL; goto done; } + qdbm = MBM_TO_DBM(4 * mbm); + if (qdbm > 127) + qdbm = 127; + qdbm |= WL_TXPWR_OVERRIDE; break; + default: + brcmf_err("Unsupported type %d\n", type); + err = -EINVAL; + goto done; } /* Make sure radio is off or on as far as software is concerned */ disable = WL_RADIO_SW_DISABLE << 16; @@ -2048,52 +1989,44 @@ brcmf_cfg80211_set_tx_power(struct wiphy *wiphy, struct wireless_dev *wdev, if (err) brcmf_err("WLC_SET_RADIO error (%d)\n", err); - if (dbm > 0xffff) - txpwrmw = 0xffff; - else - txpwrmw = (u16) dbm; - err = brcmf_fil_iovar_int_set(ifp, "qtxpower", - (s32)brcmf_mw_to_qdbm(txpwrmw)); + err = brcmf_fil_iovar_int_set(ifp, "qtxpower", qdbm); if (err) brcmf_err("qtxpower error (%d)\n", err); - cfg->conf->tx_power = dbm; done: - brcmf_dbg(TRACE, "Exit\n"); + brcmf_dbg(TRACE, "Exit %d (qdbm)\n", qdbm & ~WL_TXPWR_OVERRIDE); return err; } -static s32 brcmf_cfg80211_get_tx_power(struct wiphy *wiphy, - struct wireless_dev *wdev, - s32 *dbm) +static s32 +brcmf_cfg80211_get_tx_power(struct wiphy *wiphy, struct wireless_dev *wdev, + s32 *dbm) { struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy); - struct brcmf_if *ifp = netdev_priv(cfg_to_ndev(cfg)); - s32 txpwrdbm; - u8 result; - s32 err = 0; + struct net_device *ndev = cfg_to_ndev(cfg); + struct brcmf_if *ifp = netdev_priv(ndev); + s32 qdbm = 0; + s32 err; brcmf_dbg(TRACE, "Enter\n"); if (!check_vif_up(ifp->vif)) return -EIO; - err = brcmf_fil_iovar_int_get(ifp, "qtxpower", &txpwrdbm); + err = brcmf_fil_iovar_int_get(ifp, "qtxpower", &qdbm); if (err) { brcmf_err("error (%d)\n", err); goto done; } - - result = (u8) (txpwrdbm & ~WL_TXPWR_OVERRIDE); - *dbm = (s32) brcmf_qdbm_to_mw(result); + *dbm = (qdbm & ~WL_TXPWR_OVERRIDE) / 4; done: - brcmf_dbg(TRACE, "Exit\n"); + brcmf_dbg(TRACE, "Exit (0x%x %d)\n", qdbm, *dbm); return err; } static s32 brcmf_cfg80211_config_default_key(struct wiphy *wiphy, struct net_device *ndev, - u8 key_idx, bool unicast, bool multicast) + u8 key_idx, bool unicast, bool multicast) { struct brcmf_if *ifp = netdev_priv(ndev); u32 index; @@ -2498,6 +2431,9 @@ brcmf_cfg80211_get_station(struct wiphy *wiphy, struct net_device *ndev, struct brcmf_sta_info_le sta_info_le; u32 sta_flags; u32 is_tdls_peer; + s32 total_rssi; + s32 count_rssi; + u32 i; brcmf_dbg(TRACE, "Enter, MAC %pM\n", mac); if (!check_vif_up(ifp->vif)) @@ -2544,13 +2480,13 @@ brcmf_cfg80211_get_station(struct wiphy *wiphy, struct net_device *ndev, sinfo->rx_packets += le32_to_cpu(sta_info_le.rx_mcast_pkts); if (sinfo->tx_packets) { sinfo->filled |= BIT(NL80211_STA_INFO_TX_BITRATE); - sinfo->txrate.legacy = le32_to_cpu(sta_info_le.tx_rate); - sinfo->txrate.legacy /= 100; + sinfo->txrate.legacy = + le32_to_cpu(sta_info_le.tx_rate) / 100; } if (sinfo->rx_packets) { sinfo->filled |= BIT(NL80211_STA_INFO_RX_BITRATE); - sinfo->rxrate.legacy = le32_to_cpu(sta_info_le.rx_rate); - sinfo->rxrate.legacy /= 100; + sinfo->rxrate.legacy = + le32_to_cpu(sta_info_le.rx_rate) / 100; } if (le16_to_cpu(sta_info_le.ver) >= 4) { sinfo->filled |= BIT(NL80211_STA_INFO_TX_BYTES); @@ -2558,12 +2494,61 @@ brcmf_cfg80211_get_station(struct wiphy *wiphy, struct net_device *ndev, sinfo->filled |= BIT(NL80211_STA_INFO_RX_BYTES); sinfo->rx_bytes = le64_to_cpu(sta_info_le.rx_tot_bytes); } + total_rssi = 0; + count_rssi = 0; + for (i = 0; i < BRCMF_ANT_MAX; i++) { + if (sta_info_le.rssi[i]) { + sinfo->chain_signal_avg[count_rssi] = + sta_info_le.rssi[i]; + sinfo->chain_signal[count_rssi] = + sta_info_le.rssi[i]; + total_rssi += sta_info_le.rssi[i]; + count_rssi++; + } + } + if (count_rssi) { + sinfo->filled |= BIT(NL80211_STA_INFO_CHAIN_SIGNAL); + sinfo->chains = count_rssi; + + sinfo->filled |= BIT(NL80211_STA_INFO_SIGNAL); + total_rssi /= count_rssi; + sinfo->signal = total_rssi; + } } done: brcmf_dbg(TRACE, "Exit\n"); return err; } +static int +brcmf_cfg80211_dump_station(struct wiphy *wiphy, struct net_device *ndev, + int idx, u8 *mac, struct station_info *sinfo) +{ + struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy); + struct brcmf_if *ifp = netdev_priv(ndev); + s32 err; + + brcmf_dbg(TRACE, "Enter, idx %d\n", idx); + + if (idx == 0) { + cfg->assoclist.count = cpu_to_le32(BRCMF_MAX_ASSOCLIST); + err = brcmf_fil_cmd_data_get(ifp, BRCMF_C_GET_ASSOCLIST, + &cfg->assoclist, + sizeof(cfg->assoclist)); + if (err) { + brcmf_err("BRCMF_C_GET_ASSOCLIST unsupported, err=%d\n", + err); + cfg->assoclist.count = 0; + return -EOPNOTSUPP; + } + } + if (idx < le32_to_cpu(cfg->assoclist.count)) { + memcpy(mac, cfg->assoclist.mac[idx], ETH_ALEN); + return brcmf_cfg80211_get_station(wiphy, ndev, mac, sinfo); + } + return -ENOENT; +} + static s32 brcmf_cfg80211_set_power_mgmt(struct wiphy *wiphy, struct net_device *ndev, bool enabled, s32 timeout) @@ -4265,8 +4250,8 @@ brcmf_cfg80211_start_ap(struct wiphy *wiphy, struct net_device *ndev, brcmf_dbg(TRACE, "GO mode configuration complete\n"); } - clear_bit(BRCMF_VIF_STATUS_AP_CREATING, &ifp->vif->sme_state); set_bit(BRCMF_VIF_STATUS_AP_CREATED, &ifp->vif->sme_state); + brcmf_net_setcarrier(ifp, true); exit: if ((err) && (!mbss)) { @@ -4330,8 +4315,8 @@ static int brcmf_cfg80211_stop_ap(struct wiphy *wiphy, struct net_device *ndev) } brcmf_set_mpc(ifp, 1); brcmf_configure_arp_offload(ifp, true); - set_bit(BRCMF_VIF_STATUS_AP_CREATING, &ifp->vif->sme_state); clear_bit(BRCMF_VIF_STATUS_AP_CREATED, &ifp->vif->sme_state); + brcmf_net_setcarrier(ifp, false); return err; } @@ -4663,6 +4648,7 @@ static struct cfg80211_ops wl_cfg80211_ops = { .join_ibss = brcmf_cfg80211_join_ibss, .leave_ibss = brcmf_cfg80211_leave_ibss, .get_station = brcmf_cfg80211_get_station, + .dump_station = brcmf_cfg80211_dump_station, .set_tx_power = brcmf_cfg80211_set_tx_power, .get_tx_power = brcmf_cfg80211_get_tx_power, .add_key = brcmf_cfg80211_add_key, @@ -4747,7 +4733,8 @@ void brcmf_cfg80211_free_netdev(struct net_device *ndev) ifp = netdev_priv(ndev); vif = ifp->vif; - brcmf_free_vif(vif); + if (vif) + brcmf_free_vif(vif); free_netdev(ndev); } @@ -5039,6 +5026,7 @@ brcmf_notify_connect_status(struct brcmf_if *ifp, &ifp->vif->sme_state); } else brcmf_bss_connect_done(cfg, ndev, e, true); + brcmf_net_setcarrier(ifp, true); } else if (brcmf_is_linkdown(e)) { brcmf_dbg(CONN, "Linkdown\n"); if (!brcmf_is_ibssmode(ifp->vif)) { @@ -5048,6 +5036,7 @@ brcmf_notify_connect_status(struct brcmf_if *ifp, brcmf_init_prof(ndev_to_prof(ndev)); if (ndev != cfg_to_ndev(cfg)) complete(&cfg->vif_disabled); + brcmf_net_setcarrier(ifp, false); } else if (brcmf_is_nonetwork(cfg, e)) { if (brcmf_is_ibssmode(ifp->vif)) clear_bit(BRCMF_VIF_STATUS_CONNECTING, @@ -6211,7 +6200,8 @@ static void brcmf_free_wiphy(struct wiphy *wiphy) } struct brcmf_cfg80211_info *brcmf_cfg80211_attach(struct brcmf_pub *drvr, - struct device *busdev) + struct device *busdev, + bool p2pdev_forced) { struct net_device *ndev = brcmf_get_ifp(drvr, 0)->ndev; struct brcmf_cfg80211_info *cfg; @@ -6302,8 +6292,19 @@ struct brcmf_cfg80211_info *brcmf_cfg80211_attach(struct brcmf_pub *drvr, else *cap &= ~IEEE80211_HT_CAP_SUP_WIDTH_20_40; } + /* p2p might require that "if-events" get processed by fweh. So + * activate the already registered event handlers now and activate + * the rest when initialization has completed. drvr->config needs to + * be assigned before activating events. + */ + drvr->config = cfg; + err = brcmf_fweh_activate_events(ifp); + if (err) { + brcmf_err("FWEH activation failed (%d)\n", err); + goto wiphy_unreg_out; + } - err = brcmf_p2p_attach(cfg); + err = brcmf_p2p_attach(cfg, p2pdev_forced); if (err) { brcmf_err("P2P initilisation failed (%d)\n", err); goto wiphy_unreg_out; @@ -6324,6 +6325,13 @@ struct brcmf_cfg80211_info *brcmf_cfg80211_attach(struct brcmf_pub *drvr, brcmf_notify_tdls_peer_event); } + /* (re-) activate FWEH event handling */ + err = brcmf_fweh_activate_events(ifp); + if (err) { + brcmf_err("FWEH activation failed (%d)\n", err); + goto wiphy_unreg_out; + } + return cfg; wiphy_unreg_out: @@ -6331,6 +6339,7 @@ wiphy_unreg_out: priv_out: wl_deinit_priv(cfg); brcmf_free_vif(vif); + ifp->vif = NULL; wiphy_out: brcmf_free_wiphy(wiphy); return NULL;