X-Git-Url: https://git.kernelconcepts.de/?a=blobdiff_plain;f=include%2Fconfigs%2FMPC8313ERDB.h;h=3fdd1b0d2fa9acbf978ee7ebfa39c22928888dfe;hb=9f530d59e63f6a4584e0caee54f92255c7ed59ab;hp=4bf05d2033616fbd3401250b057f6582befbb2f9;hpb=d52785d7f5fc6c5a410c1c6c0a3f527464a21927;p=karo-tx-uboot.git

diff --git a/include/configs/MPC8313ERDB.h b/include/configs/MPC8313ERDB.h
index 4bf05d2033..3fdd1b0d2f 100644
--- a/include/configs/MPC8313ERDB.h
+++ b/include/configs/MPC8313ERDB.h
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) Freescale Semiconductor, Inc. 2006.
+ * Copyright (C) Freescale Semiconductor, Inc. 2006, 2010.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -36,6 +36,7 @@
 #define CONFIG_MPC8313ERDB	1
 
 #define CONFIG_PCI
+#define CONFIG_FSL_ELBC 1
 
 #define CONFIG_MISC_INIT_R
 
@@ -216,7 +217,8 @@
 /*
  * Local Bus LCRR and LBCR regs
  */
-#define CONFIG_SYS_LCRR	LCRR_EADC_1 | LCRR_CLKDIV_4
+#define CONFIG_SYS_LCRR_EADC	LCRR_EADC_1
+#define CONFIG_SYS_LCRR_CLKDIV	LCRR_CLKDIV_4
 #define CONFIG_SYS_LBC_LBCR	( 0x00040000 /* TODO */ \
 			| (0xFF << LBCR_BMT_SHIFT) \
 			| 0xF )	/* 0x0004ff0f */
@@ -230,18 +232,25 @@
 #define CONFIG_SYS_NAND_BASE		0xE2800000
 #endif
 
+#define CONFIG_MTD_DEVICE
+#define CONFIG_MTD_PARTITION
+#define CONFIG_CMD_MTDPARTS
+#define MTDIDS_DEFAULT			"nand0=e2800000.flash"
+#define MTDPARTS_DEFAULT 		\
+	"mtdparts=e0600000.flash:512k(uboot),128k(env),3m@1m(kernel),-(fs)"
+
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
 #define CONFIG_MTD_NAND_VERIFY_WRITE
 #define CONFIG_CMD_NAND 1
 #define CONFIG_NAND_FSL_ELBC 1
 #define CONFIG_SYS_NAND_BLOCK_SIZE 16384
-#define CONFIG_SYS_64BIT_VSPRINTF	/* needed for nand_util.c */
 
 #define CONFIG_SYS_NAND_U_BOOT_SIZE  (512 << 10)
 #define CONFIG_SYS_NAND_U_BOOT_DST   0x00100000
 #define CONFIG_SYS_NAND_U_BOOT_START 0x00100100
 #define CONFIG_SYS_NAND_U_BOOT_OFFS  16384
 #define CONFIG_SYS_NAND_U_BOOT_RELOC 0x00010000
+#define CONFIG_SYS_NAND_U_BOOT_RELOC_SP (CONFIG_SYS_NAND_U_BOOT_RELOC + 0x10000)
 
 #define CONFIG_SYS_NAND_BR_PRELIM	( CONFIG_SYS_NAND_BASE \
 				| (2<<BR_DECC_SHIFT)	/* Use HW ECC */ \
@@ -434,7 +443,7 @@
 #endif
 
 #define CONFIG_CMDLINE_EDITING 1
-
+#define CONFIG_AUTO_COMPLETE	/* add autocompletion support   */
 
 /*
  * Miscellaneous configurable options
@@ -451,10 +460,10 @@
 
 /*
  * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
+ * have to be in the first 256 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CONFIG_SYS_BOOTMAPSZ	(8 << 20)	/* Initial Memory map for Linux*/
+#define CONFIG_SYS_BOOTMAPSZ	(256 << 20)	/* Initial Memory map for Linux*/
 
 #define CONFIG_SYS_RCWH_PCIHOST 0x80000000	/* PCIHOST  */
 
@@ -512,11 +521,12 @@
 
 /* System IO Config */
 #define CONFIG_SYS_SICRH	(SICRH_TSOBI1 | SICRH_TSOBI2)	/* RGMII */
-#define CONFIG_SYS_SICRL	SICRL_USBDR			/* Enable Internal USB Phy  */
+#define CONFIG_SYS_SICRL	SICRL_USBDR_10			/* Enable Internal USB Phy  */
 
 #define CONFIG_SYS_HID0_INIT	0x000000000
 #define CONFIG_SYS_HID0_FINAL	(HID0_ENABLE_MACHINE_CHECK | \
-			 HID0_ENABLE_DYNAMIC_POWER_MANAGMENT)
+				 HID0_ENABLE_INSTRUCTION_CACHE | \
+				 HID0_ENABLE_DYNAMIC_POWER_MANAGMENT)
 
 #define CONFIG_SYS_HID2 HID2_HBE
 
@@ -579,13 +589,6 @@
  */
 #define CONFIG_ENV_OVERWRITE
 
-#define CONFIG_ETHADDR		00:E0:0C:00:95:01
-#define CONFIG_ETH1ADDR		00:E0:0C:00:95:02
-
-#define CONFIG_IPADDR		10.0.0.2
-#define CONFIG_SERVERIP		10.0.0.1
-#define CONFIG_GATEWAYIP	10.0.0.1
-#define CONFIG_NETMASK		255.0.0.0
 #define CONFIG_NETDEV		eth1
 
 #define CONFIG_HOSTNAME		mpc8313erdb