X-Git-Url: https://git.kernelconcepts.de/?a=blobdiff_plain;f=include%2Fconfigs%2FTOP5200.h;h=7240ce12835b57d43f750f2a6d6f0bf7a5fb655d;hb=375c2c9e57ea5b8d678475379378f4774aa9cb88;hp=f41dbd0ccb18f3f8a0f292fc30c8dc60e3cd2c8e;hpb=fe126d8b34d2e7c3c2dc1d4e61086018e016768c;p=karo-tx-uboot.git

diff --git a/include/configs/TOP5200.h b/include/configs/TOP5200.h
index f41dbd0ccb..7240ce1283 100644
--- a/include/configs/TOP5200.h
+++ b/include/configs/TOP5200.h
@@ -50,11 +50,6 @@
 #define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH  */
 #define BOOTFLAG_WARM		0x02	/* Software reboot	     */
 
-#define CFG_CACHELINE_SIZE	32	/* For MPC5xxx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-#  define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
-#endif
-
 /*
  * Serial console configuration
  */
@@ -81,12 +76,6 @@
 #  define CONFIG_PCI_IO_PHYS	CONFIG_PCI_IO_BUS
 #  define CONFIG_PCI_IO_SIZE	0x01000000
 
-#  define ADD_PCI_CMD 		CFG_CMD_PCI
-
-#else	/* no Evaluation board */
-
-#  define ADD_PCI_CMD		0  /* no CFG_CMD_PCI */
-
 #endif
 
 /* USB */
@@ -99,49 +88,49 @@
 #  else
 #    define CONFIG_USB_CONFIG	0x00001000
 #  endif
-#  define ADD_USB_CMD             CFG_CMD_USB | CFG_CMD_FAT
 #  define CONFIG_DOS_PARTITION
 #  define CONFIG_USB_STORAGE
 
-#else
-
-#  define ADD_USB_CMD		0
-
 #endif
 
 /* IDE */
 #if defined (CONFIG_EVAL5200) || defined (CONFIG_LITE5200)
-
-#  define ADD_IDE_CMD             CFG_CMD_IDE | CFG_CMD_FAT
 #  define CONFIG_DOS_PARTITION
+#endif
 
-#else
 
-#  define ADD_IDE_CMD		0
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
 
-#endif
 
 /*
- * Supported commands
+ * Command line configuration.
  */
-#define CONFIG_COMMANDS	      ( CONFIG_CMD_DFL	| \
-				ADD_PCI_CMD	| \
-				ADD_USB_CMD	| \
-				ADD_IDE_CMD	| \
-				CFG_CMD_ASKENV	| \
-				CFG_CMD_DATE	| \
-				CFG_CMD_DHCP	| \
-				CFG_CMD_I2C	| \
-				CFG_CMD_EEPROM	| \
-				CFG_CMD_REGINFO	| \
-				CFG_CMD_IMMAP	| \
-				CFG_CMD_ELF	| \
-				CFG_CMD_MII 	| \
-				CFG_CMD_BEDBUG	\
-			      )
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_BEDBUG
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IMMAP
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_REGINFO
+
+#if defined (CONFIG_EVAL5200) || defined (CONFIG_LITE5200)
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_USB
+#define CONFIG_CMD_PCI
+#endif
+
 
 /*
  * MUST be low boot - HIGHBOOT is not supported anymore
@@ -186,7 +175,7 @@
 /*
  * IPB Bus clocking configuration.
  */
-#undef CFG_IPBSPEED_133   		/* define for 133MHz speed */
+#undef CFG_IPBCLK_EQUALS_XLBCLK   		/* define for 133MHz speed */
 
 /*
  * I2C configuration
@@ -336,7 +325,7 @@
  */
 #define CFG_LONGHELP			/* undef to save memory	    */
 #define CFG_PROMPT		"=> "	/* Monitor Command Prompt   */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #  define CFG_CBSIZE		1024	/* Console I/O Buffer Size  */
 #else
 #  define CFG_CBSIZE		256	/* Console I/O Buffer Size  */
@@ -352,6 +341,12 @@
 
 #define CFG_HZ			1000	/* decrementer freq: 1 ms ticks */
 
+#define CFG_CACHELINE_SIZE	32	/* For MPC5xxx CPUs */
+#if defined(CONFIG_CMD_KGDB)
+#  define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
+#endif
+
+
 #ifdef CONFIG_EVAL5200		/* M48T08 is available with the Evaluation board only */
   #define CONFIG_RTC_MK48T59	1	/* use M48T08 on EVAL5200 */
   #define RTC(reg)		(0xf0010000+reg)