X-Git-Url: https://git.kernelconcepts.de/?a=blobdiff_plain;f=include%2Fconfigs%2Fpxa255_idp.h;h=332d79f89f535d10454a0e45a7e17e1a699bffda;hb=ddc2d056e83d1a88dd24a5e03e7460dc37f2f423;hp=b4327c621c959501caae25ad053be2694a996b76;hpb=02cf8fd6fbef7ac015a234b09e7b55765aefcd4f;p=karo-tx-uboot.git

diff --git a/include/configs/pxa255_idp.h b/include/configs/pxa255_idp.h
index b4327c621c..332d79f89f 100644
--- a/include/configs/pxa255_idp.h
+++ b/include/configs/pxa255_idp.h
@@ -13,23 +13,7 @@
  * Cliff Brake <cliff.brake@gmail.com>
  * Configuation settings for the Accelent/Vibren PXA255 IDP
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __CONFIG_H
@@ -42,7 +26,6 @@
  * so we MUST NOT initialize critical regs like mem-timing ...
  */
 #undef CONFIG_SKIP_LOWLEVEL_INIT			/* define for developing */
-#undef CONFIG_SKIP_RELOCATE_UBOOT			/* define for developing */
 #define	CONFIG_SYS_TEXT_BASE	0x0
 
 /*
@@ -56,27 +39,25 @@
  * High Level Configuration Options
  * (easy to change)
  */
-#define CONFIG_PXA250		1	/* This is an PXA250 CPU    */
+#define CONFIG_CPU_PXA25X		1	/* This is an PXA250 CPU    */
 
 #undef CONFIG_LCD
 #ifdef CONFIG_LCD
+#define CONFIG_PXA_LCD
 #define CONFIG_SHARP_LM8V31
 #endif
 
 #define CONFIG_MMC		1
 #define CONFIG_DOS_PARTITION	1
-#define BOARD_LATE_INIT		1
-
-#undef CONFIG_USE_IRQ			/* we don't need IRQ/FIQ stuff */
+#define CONFIG_BOARD_LATE_INIT
 
 /* we will never enable dcache, because we have to setup MMU first */
-#define CONFIG_SYS_NO_DCACHE
+#define CONFIG_SYS_DCACHE_OFF
 
 /*
  * Size of malloc() pool
  */
 #define CONFIG_SYS_MALLOC_LEN	    (CONFIG_ENV_SIZE + 128*1024)
-#define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
 
 /*
  * PXA250 IDP memory map information
@@ -88,7 +69,6 @@
 /*
  * Hardware drivers
  */
-#define CONFIG_NET_MULTI
 #define CONFIG_SMC91111
 #define CONFIG_SMC91111_BASE	(PXA_CS5_PHYS + IDP_CS5_ETH_OFFSET + 0x300)
 #define CONFIG_SMC_USE_32_BIT	1
@@ -104,6 +84,7 @@
  */
 #define CONFIG_PXA_SERIAL
 #define CONFIG_FFUART	       1       /* we use FFUART on LUBBOCK */
+#define CONFIG_CONS_INDEX	3
 
 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
@@ -123,8 +104,6 @@
 /*
  * Command line configuration.
  */
-#include <config_cmd_default.h>
-
 #define CONFIG_CMD_FAT
 #define CONFIG_CMD_DHCP
 
@@ -218,20 +197,18 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	115200		/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2		/* which serial port to use */
 #endif
 
 /*
  * Miscellaneous configurable options
  */
 #define CONFIG_SYS_HUSH_PARSER		1
-#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 
 #define CONFIG_SYS_LONGHELP				/* undef to save memory		*/
+#undef CONFIG_SYS_PROMPT
 #ifdef CONFIG_SYS_HUSH_PARSER
 #define CONFIG_SYS_PROMPT		"$ "		/* Monitor Command Prompt */
 #else
-#define CONFIG_SYS_PROMPT		"=> "		/* Monitor Command Prompt */
 #endif
 #define CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size	*/
 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
@@ -244,31 +221,17 @@
 
 #define CONFIG_SYS_LOAD_ADDR		0xa0800000	/* default load address */
 
-#define CONFIG_SYS_HZ			1000
 #define CONFIG_SYS_CPUSPEED		0x161		/* set core clock to 400/200/100 MHz */
 
 #define RTC	1				/* enable 32KHz osc */
 
-						/* valid baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
-
 #ifdef CONFIG_MMC
-#define CONFIG_PXA_MMC
+#define	CONFIG_GENERIC_MMC
+#define	CONFIG_PXA_MMC_GENERIC
 #define CONFIG_CMD_MMC
 #define CONFIG_SYS_MMC_BASE		0xF0000000
 #endif
 
-/*
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE	(128*1024)	/* regular stack */
-#ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ	(4*1024)	/* IRQ stack */
-#define CONFIG_STACKSIZE_FIQ	(4*1024)	/* FIQ stack */
-#endif
-
 /*
  * Physical Memory Map
  */
@@ -294,7 +257,7 @@
 #define CONFIG_SYS_FLASH_BASE		PHYS_FLASH_1
 
 #define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
-#define	CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_GBL_DATA_SIZE + PHYS_SDRAM_1)
+#define	CONFIG_SYS_INIT_SP_ADDR		0xfffff800
 
 /*
  * GPIO settings