X-Git-Url: https://git.kernelconcepts.de/?a=blobdiff_plain;f=include%2Fconfigs%2Fxilinx-ppc440.h;h=f45700878ecdf842de1776f5235f5092e08ccbc1;hb=7a919df564980595e861155ae48691045b54258a;hp=40293cd84291d98433e9822dd85437738c33200d;hpb=e07f4a8033b6270b8103049adb6456f660ff4a89;p=karo-tx-uboot.git

diff --git a/include/configs/xilinx-ppc440.h b/include/configs/xilinx-ppc440.h
index 40293cd842..f45700878e 100644
--- a/include/configs/xilinx-ppc440.h
+++ b/include/configs/xilinx-ppc440.h
@@ -2,105 +2,16 @@
  * (C) Copyright 2008
  *  Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es
  *  This work has been supported by: QTechnology  http://qtec.com/
- *  This program is free software: you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation, either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *  You should have received a copy of the GNU General Public License
- *  along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ * SPDX-License-Identifier:	GPL-2.0+
 */
 
 #ifndef __CONFIG_GEN_H
 #define __CONFIG_GEN_H
-/*
-#define DEBUG
-#define ET_DEBUG
-*/
- /*CPU*/
-#define CONFIG_XILINX_440	1
-#define CONFIG_440		1
-#define CONFIG_4xx		1
-
-/*Mem Map*/
-#define CFG_SDRAM_BASE		0x0
-#define CFG_MONITOR_BASE	TEXT_BASE
-#define CFG_MONITOR_LEN		(192 * 1024)
-#define CFG_MALLOC_LEN		(CFG_ENV_SIZE + 128 * 1024)
 
-/*Uart*/
-#define CONFIG_XILINX_UARTLITE
-#define CONFIG_BAUDRATE		XPAR_UARTLITE_0_BAUDRATE
-#define CFG_BAUDRATE_TABLE	{ XPAR_UARTLITE_0_BAUDRATE }
-#define CONFIG_SERIAL_BASE	XPAR_UARTLITE_0_BASEADDR
-
-/*Cmd*/
-#include <config_cmd_default.h>
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_CACHE
-#define CONFIG_CMD_DIAG
-#define CONFIG_CMD_ELF
-#define CONFIG_CMD_IRQ
-#define CONFIG_CMD_REGINFO
-#define CONFIG_CMD_JFFS2
-#define CONFIG_JFFS2_CMDLINE
-#undef CONFIG_CMD_SPI
-#undef CONFIG_CMD_I2C
-#undef CONFIG_CMD_DTT
-#undef CONFIG_CMD_NET
-#undef CONFIG_CMD_PING
-#undef CONFIG_CMD_DHCP
-#undef CONFIG_CMD_EEPROM
-#undef CONFIG_CMD_IMLS
-
-/*Misc*/
-#define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds     */
-#define CFG_LONGHELP			/* undef to save memory         */
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE		1024	/* Console I/O Buffer Size      */
-#else
-#define CFG_CBSIZE		256	/* Console I/O Buffer Size      */
-#endif
-#define CFG_PBSIZE		(CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)
-#define CFG_MAXARGS		16	/* max number of command args   */
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size */
-#define CFG_MEMTEST_START	0x00400000	/* memtest works on           */
-#define CFG_MEMTEST_END		0x00C00000	/* 4 ... 12 MB in DRAM        */
-#define CFG_LOAD_ADDR		0x00400000	/* default load address       */
-#define CFG_EXTBDINFO		1	/* Extended board_into (bd_t) */
-#define CFG_HZ			1000	/* decrementer freq: 1 ms ticks */
-#define CONFIG_CMDLINE_EDITING		/* add command line history     */
-#define CONFIG_AUTO_COMPLETE		/* add autocompletion support   */
-#define CONFIG_LOOPW			/* enable loopw command         */
-#define CONFIG_MX_CYCLIC		/* enable mdc/mwc commands      */
-#define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
-#define CONFIG_VERSION_VARIABLE		/* include version env variable */
-#define CFG_CONSOLE_INFO_QUIET		/* don't print console @ startup */
-#define CFG_HUSH_PARSER			/* Use the HUSH parser          */
-#define	CFG_PROMPT_HUSH_PS2	"> "
-#define CONFIG_LOADS_ECHO		/* echo on for serial download  */
-#define CFG_LOADS_BAUD_CHANGE		/* allow baudrate change        */
-#define CFG_BOOTMAPSZ		(8 << 20)/* Initial Memory map for Linux */
-
-/*Stack*/
-#define CFG_INIT_RAM_ADDR	0x800000	/* Initial RAM address    */
-#define CFG_INIT_RAM_END	0x2000		/* End of used area in RAM  */
-#define CFG_GBL_DATA_SIZE	128		/* num bytes initial data   */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
-/*Speed*/
-#define CONFIG_SYS_CLK_FREQ	XPAR_CORE_CLOCK_FREQ_HZ
+/*CPU*/
+#define CONFIG_440		1
+#define CONFIG_XILINX_440	1
 
-/*Flash*/
-#define	CFG_FLASH_BASE		XPAR_FLASH_MEM0_BASEADDR
-#define	CFG_FLASH_CFI		1
-#define	CONFIG_FLASH_CFI_DRIVER	1
-#define	CFG_FLASH_EMPTY_INFO	1
-#define	CFG_MAX_FLASH_BANKS	1
-#define	CFG_FLASH_PROTECTION
+#include <configs/xilinx-ppc.h>
 
 #endif						/* __CONFIG_H */