X-Git-Url: https://git.kernelconcepts.de/?a=blobdiff_plain;f=include%2Fnetdev.h;h=b8d303d0895b24dd90607baced372568159282c0;hb=4151a400cfcd4762ca422a04890cd5869bac155c;hp=17fdafba835e97c91e42fd945a5125dc4cf9dcf5;hpb=a694610d3361465d4c8d27dde72ab8b63d31115e;p=karo-tx-uboot.git

diff --git a/include/netdev.h b/include/netdev.h
index 17fdafba83..b8d303d089 100644
--- a/include/netdev.h
+++ b/include/netdev.h
@@ -41,19 +41,37 @@ int board_eth_init(bd_t *bis);
 int cpu_eth_init(bd_t *bis);
 
 /* Driver initialization prototypes */
+int altera_tse_initialize(u8 dev_num, int mac_base,
+			  int sgdma_rx_base, int sgdma_tx_base,
+			  u32 sgdma_desc_base, u32 sgdma_desc_size);
+int at91emac_register(bd_t *bis, unsigned long iobase);
 int au1x00_enet_initialize(bd_t*);
+int ax88180_initialize(bd_t *bis);
 int bfin_EMAC_initialize(bd_t *bis);
-int dc21x4x_initialize(bd_t *bis);
+int calxedaxgmac_initialize(u32 id, ulong base_addr);
+int cs8900_initialize(u8 dev_num, int base_addr);
 int davinci_emac_initialize(void);
+int dc21x4x_initialize(bd_t *bis);
+int designware_initialize(u32 id, ulong base_addr, u32 phy_addr, u32 interface);
+int dm9000_initialize(bd_t *bis);
 int dnet_eth_initialize(int id, void *regs, unsigned int phy_addr);
 int e1000_initialize(bd_t *bis);
 int eepro100_initialize(bd_t *bis);
+int enc28j60_initialize(unsigned int bus, unsigned int cs,
+	unsigned int max_hz, unsigned int mode);
+int ep93xx_eth_initialize(u8 dev_num, int base_addr);
 int eth_3com_initialize (bd_t * bis);
+int ethoc_initialize(u8 dev_num, int base_addr);
 int fec_initialize (bd_t *bis);
+int fecmxc_initialize(bd_t *bis);
+int fecmxc_initialize_multi(bd_t *bis, int dev_id, int phy_id, uint32_t addr);
+int ftgmac100_initialize(bd_t *bits);
+int ftmac100_initialize(bd_t *bits);
 int greth_initialize(bd_t *bis);
 void gt6426x_eth_initialize(bd_t *bis);
 int inca_switch_initialize(bd_t *bis);
-int kirkwood_egiga_initialize(bd_t *bis);
+int ks8695_eth_initialize(void);
+int lan91c96_initialize(u8 dev_num, int base_addr);
 int macb_eth_initialize(int id, void *regs, unsigned int phy_addr);
 int mcdmafec_initialize(bd_t *bis);
 int mcffec_initialize(bd_t *bis);
@@ -61,7 +79,9 @@ int mpc512x_fec_initialize(bd_t *bis);
 int mpc5xxx_fec_initialize(bd_t *bis);
 int mpc8220_fec_initialize(bd_t *bis);
 int mpc82xx_scc_enet_initialize(bd_t *bis);
+int mvgbe_initialize(bd_t *bis);
 int natsemi_initialize(bd_t *bis);
+int ne2k_register(void);
 int npe_initialize(bd_t *bis);
 int ns8382x_initialize(bd_t *bis);
 int pcnet_initialize(bd_t *bis);
@@ -70,13 +90,30 @@ int ppc_4xx_eth_initialize (bd_t *bis);
 int rtl8139_initialize(bd_t *bis);
 int rtl8169_initialize(bd_t *bis);
 int scc_initialize(bd_t *bis);
+int sh_eth_initialize(bd_t *bis);
 int skge_initialize(bd_t *bis);
+int smc91111_initialize(u8 dev_num, int base_addr);
+int smc911x_initialize(u8 dev_num, int base_addr);
 int tsi108_eth_initialize(bd_t *bis);
-int uec_initialize(int index);
 int uec_standard_init(bd_t *bis);
 int uli526x_initialize(bd_t *bis);
-int sh_eth_initialize(bd_t *bis);
-int dm9000_initialize(bd_t *bis);
+int armada100_fec_register(unsigned long base_addr);
+int xilinx_axiemac_initialize(bd_t *bis, unsigned long base_addr,
+							unsigned long dma_addr);
+int xilinx_emaclite_initialize(bd_t *bis, unsigned long base_addr,
+							int txpp, int rxpp);
+int xilinx_ll_temac_eth_init(bd_t *bis, unsigned long base_addr, int flags,
+						unsigned long ctrl_addr);
+int zynq_gem_initialize(bd_t *bis, int base_addr);
+/*
+ * As long as the Xilinx xps_ll_temac ethernet driver has not its own interface
+ * exported by a public hader file, we need a global definition at this point.
+ */
+#if defined(CONFIG_XILINX_LL_TEMAC)
+#define XILINX_LL_TEMAC_M_FIFO		0	/* use FIFO Ctrl */
+#define XILINX_LL_TEMAC_M_SDMA_PLB	(1 << 0)/* use SDMA Ctrl via PLB */
+#define XILINX_LL_TEMAC_M_SDMA_DCR	(1 << 1)/* use SDMA Ctrl via DCR */
+#endif
 
 /* Boards with PCI network controllers can call this from their board_eth_init()
  * function to initialize whatever's on board.
@@ -167,4 +204,9 @@ struct mv88e61xx_config {
 int mv88e61xx_switch_initialize(struct mv88e61xx_config *swconfig);
 #endif /* CONFIG_MV88E61XX_SWITCH */
 
+/*
+ * Allow FEC to fine-tune MII configuration on boards which require this.
+ */
+int fecmxc_register_mii_postcall(struct eth_device *dev, int (*cb)(int));
+
 #endif /* _NETDEV_H_ */