From 617e46e3c01da2785d320d48d1248c97edbab685 Mon Sep 17 00:00:00 2001 From: Chunhe Lan Date: Wed, 18 Apr 2012 15:58:56 -0500 Subject: [PATCH] powerpc/p1023rds: Disable nor flash node and enable nand flash node In the p1023rds, when system boots from nor flash, kernel only accesses nor flash and can not access nand flash with BR0/OR0; when system boots from nand flash, kernel only accesses nand flash and can not access nor flash with BR0/OR0. Default device tree nor and nand node should have the following structure: Example: nor_flash: nor@0,0 { #address-cells = <1>; #size-cells = <1>; compatible = "cfi-flash"; reg = <0x0 0x0 0x02000000>; bank-width = <2>; device-width = <1>; status = "okay"; partition@0 { label = "ramdisk"; reg = <0x00000000 0x01c00000>; }; } nand_flash: nand@1,0 { #address-cells = <1>; #size-cells = <1>; compatible = "fsl,p1023-fcm-nand", "fsl,elbc-fcm-nand"; reg = <0x2 0x0 0x00040000>; status = "disabled"; u-boot-nand@0 { /* This location must not be altered */ /* 1MB for u-boot Bootloader Image */ reg = <0x0 0x00100000>; read-only; }; } When booting from nor flash, the status of nor node is enabled and the status of nand node is disabled in the default dts file, so do not do anything. But, when booting from nand flash, need to do some operations: o Disable the NOR node by setting status = "disabled"; o Enable the NAND node by setting status = "okay"; Signed-off-by: Chunhe Lan Signed-off-by: Andy Fleming --- board/freescale/p1023rds/p1023rds.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/board/freescale/p1023rds/p1023rds.c b/board/freescale/p1023rds/p1023rds.c index 546819cb59..082976a924 100644 --- a/board/freescale/p1023rds/p1023rds.c +++ b/board/freescale/p1023rds/p1023rds.c @@ -197,6 +197,12 @@ void ft_board_setup(void *blob, bd_t *bd) fdt_fixup_memory(blob, (u64)base, (u64)size); + /* By default NOR is on, and NAND is disabled */ +#ifdef CONFIG_NAND_U_BOOT + do_fixup_by_path_string(blob, "nor_flash", "status", "disabled"); + do_fixup_by_path_string(blob, "nand_flash", "status", "okay"); +#endif + fdt_fixup_fman_ethernet(blob); } #endif -- 2.39.2