From 64ff2aef91afdff7f22eaef05a65b5bc3429ef21 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Fri, 20 Jan 2017 12:36:32 -0800 Subject: [PATCH] net: dsa: bcm_sf2: Allow non-IMP ports to have Broadcom tags enabled Parse the "brcm,use-bcm-hdr" boolean property during ports identification to fill a bitmask of ports that should have Broadcom tags enabled. This is needed in some configurations where per-packet metadata can be exchanged using Broadcom tags between the switch and an on-chip acceleration device. Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller --- .../devicetree/bindings/net/brcm,bcm7445-switch-v4.0.txt | 8 ++++++++ drivers/net/dsa/bcm_sf2.c | 7 +++++++ drivers/net/dsa/bcm_sf2.h | 3 +++ 3 files changed, 18 insertions(+) diff --git a/Documentation/devicetree/bindings/net/brcm,bcm7445-switch-v4.0.txt b/Documentation/devicetree/bindings/net/brcm,bcm7445-switch-v4.0.txt index e1b2c3e32859..9a734d808aa7 100644 --- a/Documentation/devicetree/bindings/net/brcm,bcm7445-switch-v4.0.txt +++ b/Documentation/devicetree/bindings/net/brcm,bcm7445-switch-v4.0.txt @@ -41,6 +41,13 @@ Optional properties: Admission Control Block supports reporting the number of packets in-flight in a switch queue +Port subnodes: + +Optional properties: + +- brcm,use-bcm-hdr: boolean property, if present, indicates that the switch + port has Broadcom tags enabled (per-packet metadata) + Example: switch_top@f0b00000 { @@ -114,6 +121,7 @@ switch_top@f0b00000 { port@0 { label = "gphy"; reg = <0>; + brcm,use-bcm-hdr; }; ... }; diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c index 571e112c8e34..8eecfd227e06 100644 --- a/drivers/net/dsa/bcm_sf2.c +++ b/drivers/net/dsa/bcm_sf2.c @@ -236,6 +236,10 @@ static int bcm_sf2_port_setup(struct dsa_switch *ds, int port, reg &= ~P_TXQ_PSM_VDD(port); core_writel(priv, reg, CORE_MEM_PSM_VDD_CTRL); + /* Enable Broadcom tags for that port if requested */ + if (priv->brcm_tag_mask & BIT(port)) + bcm_sf2_brcm_hdr_setup(priv, port); + /* Clear the Rx and Tx disable bits and set to no spanning tree */ core_writel(priv, 0, CORE_G_PCTL_PORT(port)); @@ -515,6 +519,9 @@ static void bcm_sf2_identify_ports(struct bcm_sf2_priv *priv, if (mode == PHY_INTERFACE_MODE_MOCA) priv->moca_port = port_num; + + if (of_property_read_bool(port, "brcm,use-bcm-hdr")) + priv->brcm_tag_mask |= 1 << port_num; } } diff --git a/drivers/net/dsa/bcm_sf2.h b/drivers/net/dsa/bcm_sf2.h index a1430866bd79..6e1f74e4d471 100644 --- a/drivers/net/dsa/bcm_sf2.h +++ b/drivers/net/dsa/bcm_sf2.h @@ -100,6 +100,9 @@ struct bcm_sf2_priv { struct device_node *master_mii_dn; struct mii_bus *slave_mii_bus; struct mii_bus *master_mii_bus; + + /* Bitmask of ports needing BRCM tags */ + unsigned int brcm_tag_mask; }; static inline struct bcm_sf2_priv *bcm_sf2_to_priv(struct dsa_switch *ds) -- 2.39.5